Extreme poverty and development: the role of state in the assurance of minimal existence conditions

This paper follows the idea of Amartya Sen, Nobel Prize of economic, about the role of State in the assurance of minimal existence condition, and aim to answer how countries of Latin America (specifically Brazil) and countries of Europe (specifically United Kingdom) deal with the assurance of this minimal existence conditions. According to Amartya Sen’s view, development must be seen as a process of expanding substantive freedoms, such expansion being the primary purpose of each society and the main mean of development. Substantive freedoms can be considered as basic capabilities allocated to individuals whereby they are entitled to be architects of their own lives, providing them conditions to “live as they wish”. These basic capabilities are divided by Amartya Sen in 5 (five) kinds of substantive freedoms, but for this article’s purpose, we will consider just one of this 5 (five) kinds, specifically the Protective Safety capability. Protective Safety capability may be defined as the assurance of basic means of survival for individuals who are in extreme poverty, at risk of starvation or hypothermia, or even impending famine. Among the means available that could be used to avoid such situations are the possibility of supplemental income to the needy, distributing food and clothing to the needy, supply of energy and water, among others. But how countries deal whit this protective safety? Aiming to answer this question, we selected the problem of “fuel poverty” and how Brazil and United Kingdom solve it (if they solve), in order to assess how the solution found impacts development. The analysis and the comparison between these countries will allow an answer to the question proposed.

The use of software Mapavox for teaching graphics and games to blind and low vision students: a development through practices

Current policies on education to visually impaired point for a growing trend of including students with special educational needs in regular schools. However, most often this inclusion is not accompanied by an appropriate professional trained or infrastructure, which has been presented as a big problem for regular school teachers who have students with visual impairments in their classroom. Based on this situation, the Group of Extension in Tactile Cartography from UNESP - University of the State of São Paulo - Campus de Rio Claro - SP - Brazil has been developing educational material of geography and cartography to blind students at a special school. Among the materials developed in this study highlight the development of graphics and board games provided with sound capabilities through MAPAVOX, software developed in partnership with UFRJ - Federal University from Rio de Janeiro - RJ - Brazil. Through this software, sound capabilities can be inserted into built materials, giving them a multi-sensory character. In most cases the necessary conditions for building specific materials to students with visual impairments is expensive and beyond the reach of features from a regular school, so the survey sought to use easy access and low cost materials like Cork, leaf aluminum, material for fixing and others. The development of these materials was supported by preparation in laboratory and its subsequent test through practices involving blind students. The methodology used on the survey is based on qualitative research and non comparative analysis of the results. In other words, the material is built based on the special students perception and reality construction, not being mere adaptations of visual materials, but a construction focused on the reality of the visually impaired. The results proved were quite successful as the materials prepared were effective on mediating the learning process of students with disabilities. Geographical and cartographic concepts were seized by the students through the technology used, associated with the use of materials that took into account in its building process the perception of the students.

Reinternações psiquiátricas no Rio Grande do Norte: implicações e impacto das novas estratégias de atenção à saúde mental

The Brazilian Psychiatric Reform based on the desinstitucionalization of the assistance, translated to the emphasis on community/territorial treatment and in the social inclusion of the mental suffering, promoted advances in the psychiatric restructuring. In the Rio Grande do Norte (RN), we can enumerate as advances of the Brazilian Psychiatric Reform the expansion of the mental health care chain and the implementation of some strategies that, together, aims to further the psychosocial attention of the individual with psych suffering and to reduce the indices of psychiatrics readmissions in the state. In the current Brazilian‟s mental health situation we were interesting in answered the following question: what the impact of the substitutes services‟ extension in the revolving door phenomenon? This search aims to analyze the revolving door phenomenon occurrences based on the news strategies of mental health care in the Rio Grande do Norte. This is a descriptive-exploratory study with a qualitative approach, oriented by the theoretical framework of critical-dialectical approach about the Brazilian Psychiatric Reform and using the thematic oral history as method of information collects. The search was realized on the Hospital João Machado (HJM), estate reference in psychiatric treatment, and the participants was 20 professionals that work on it. The collection of information had started after the approval of the UFRN Research Ethics Committee with the opinion number 216/2011 and CAAE number 0021.0.051.000-11 and was realized using the direct observation and semi-structured interview. The study‟s results were categorized in two categories and five subcategories of analysis. CATEGORY 1) Current situation of the mental health care chain in the RN, with the subcategories: 1.1 Impact of the new services of mental health care in the revolving door phenomenon in the RN; 1.2 Implications of the new services of mental health care in assisting user to the HJM; 1.3 Issues the permeate the mental health care chain in the RN. CATEORY 2) Main causes of the revolving door phenomenon in HJM, with the categories: 2.1 Family problems; 2.2 Lack of assistance after discharge from psychiatric hospital. In summary, we conclude that the extension of the mental health care chain contributed for the reduction of the psychiatrics re-hospitalization‟s indices in RN. However, we realized that territorial services of mental health care are not the only responsible for the revolving door phenomenon. Factors as family problems and the disarticulation of the assistance after the discharge from hospital influence on the perpetuation of hospitalizations and re-hospitalizations in the local scenario. To study the revolving door phenomenon that occur in the psychiatrics‟ assistance considering the news strategies of mental health care allowed us to approach the advances and challenges brought by the RPb and by the desinstitucionatization in the state, indicating the need for further discussions and problem-solving strategies of psychosocial care.

Sandfly fauna in an area endemic for visceral leishmaniasis in Aracaju, State of Sergipe, Northeast Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A modified Primal-Dual Logarithmic-Barrier Method for solving the Optimal Power Flow problem with discrete and continuous control variables

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

H-2 and H-infinity-optimal control for the tracking problem with zero variation

The problem of signal tracking, in the presence of a disturbance signal in the plant, is solved using a zero-variation methodology. A state feedback controller is designed in order to minimise the H-2-norm of the closed-loop system, such that the effect of the disturbance is attenuated. Then, a state estimator is designed and the modification of the zeros is used to minimise the H-infinity-norm from the reference input signal to the error signal. The error is taken to be the difference between the reference and the output signals, thereby making it a tracking problem. The design is formulated in a linear matrix inequality framework, such that the optimal solution of the stated control problem is obtained. Practical examples illustrate the effectiveness of the proposed method.

Observer-based state-feedback versus H-infinity output feedback control solved by LMI approach for applications in smart structures

This paper aims with the use of linear matrix inequalities approach (LMIs) for application in active vibration control problems in smart strutures. A robust controller for active damping in a panel was designed with piezoelectrical actuators in optimal locations for illustration of the main proposal. It was considered, in the simulations of the closed-loop, a model identified by eigensystem realization algorithm (ERA) and reduced by modal decomposition. We tested two differents techniques to solve the problem. The first one uses LMI approach by state-feedback based in an observer design, considering several simultaneous constraints as: a decay rate, limited input on the actuators, bounded output peak (output energy) and robustness to parametic uncertainties. The results demonstrated the vibration attenuation in the structure by controlling only the first modes and the increased damping in the bandwidth of interest. However, it is possible to occur spillover effects, because the design has not been done considering the dynamic uncertainties related with high frequencies modes. In this sense, the second technique uses the classical H. output feedback control, also solved by LMI approach, considering robustness to residual dynamic to overcome the problem found in the first test. The results are compared and discussed. The responses shown the robust performance of the system and the good reduction of the vibration level, without increase mass.

Evaluation of strip rolling directly from the semi-solid state

defect metal alloy strip when thixorolling directly from the semi-solid state. To facilitate the study lead/tin alloys were chosen for their relatively low operating temperature. The objective is to extrapolate these findings to the higher temperature aluminium, alloys. Three alloys (70%Pb30%Sn, 60%Pb-40%Sn, 50%Pb-50%wtSn) were used particularly to study the influence of the solidification interval. The equipment consists of a two roll mill arranged as an upper and lower roller, where both rollers are driven at a controlled speed. The lower roller is fed with semi solid alloy through a ceramic nozzle attached to the lower end of a cooling slope. Several types of nozzle and their position at the roller were tested. This produced different solidifications and consequently different finished strip. The alloys were first cast and then poured onto the cooling slope through a tundish in order to create a continuous laminar flow of slurry and uniformity of metal strip quality. The pouring was tested at different positions along the slope. The cooling slope was coated with colloidal graphite to promote a smooth slurry flow and avoid the problem of adherence and premature solidification. The metallic slurry not only cools along the slope but is also initially super-cooled to a mush by the lower roller whilst at room temperatures, thus enabling thixorolling. It was also found that the nozzle position could be adjusted to enable the upper roller to also contribute to the solidification of the metallic slurry. However the rollers and the cooling slope naturally heat up. Temperature distribution in these zones was analysed by means of three thermocouples positioned along the cooling slope and a fourth in the base of the semi solid pool within the nozzle. The objective being to design an optimum pouring and cooling system. The formed strip was cooled down to room temperature with a shower of water. Microstructures of the thixorolling process were analysed. The differences in solidification conditions resulted in differing qualities of finished strip and corresponding defect types, all of which are a serious quality issue for the rolled product.

Piranha attacks in dammed streams used for human recreation in the State of São Paulo, Brazil

Ataques por piranhas vêm se tornando um problema comum em trechos represados de rios e córregos no estado de São Paulo, Sudeste do Brasil. em dois surtos ocorridos em dois municípios vizinhos no noroeste do estado, 74 banhistas foram mordidos. Uma mordida por pessoa foi registrada, em curto período do ano. As mordidas estão relacionadas a cuidado parental e/ou defesa do território de desova, o que reforça estudos anteriores e desmistifica os ataques por este peixe lendário, da maneira como são popularmente percebidos. A colocação de redes de malha fina e a remoção de vegetação aquática cessaram os ataques.

Risk factors and presence of antibodies to Toxoplasma gondii in dogs from the coast of São Paulo State, Brazil

A toxoplasmose é causada por um protozoário parasita intracelular obrigatório, Toxoplasma gondii, e acomete vertebrados homeotérmicos incluindo animais de companhia e o homem. O cão apresenta importância epidemiológica por atuar como sentinela da infecção para o homem. O presente estudo objetivou determinar a ocorrência de anticorpos para T. gondii em 205 amostras de soro de cães do município de Ubatuba, SP, Brasil, pela reação de imunofluorescência indireta (RIFI), assim como os fatores de risco relacionados à infecção nos animais, como raça, idade, sexo, acesso a rua, ingestão de comida caseira, acesso a água não tratada e presença de roedores. 52/205 (25,4%) amostras foram positivas para toxoplasmose, com títulos variando de 16 a 256. Os resultados sorológicos apresentaram associação significativa (P<0,05) com consumo de comida caseira (45/118; 38,1%; IC95% 29,9%-47,2%) (OR=7,0; CI95% 3,0-16,6), e acesso a rua, em que aqueles que não tinham acesso a rua foram prevalentes (37/121; 30,6%; IC95% 23,1%-39,3%) (OR=0,5; CI95% 0,2-1,0). Estes resultados demonstram que a toxoplasmose na região está relacionada com problema de educação sanitária, principalmente quanto ao adequado cozimento dos alimentos, visto que a maioria dos animais positivos não apresentou associação significativa com presença de roedores ou consumo de água não tratada, porém os mesmos permaneciam em casa aos quais fora oferecida comida caseira. Portanto, a toxoplasmose consiste em um problema de saúde pública na região estudada, sendo necessárias medidas sanitárias para o controle da infecção, visto a estreita relação homem-cão e os fatores de risco presentes.

Chlamydophila psittaci and Toxoplasma gondii infection in pigeons (Columba livia) from São Paulo State, Brazil

Pigeons (Columba livia) cohabit with humans in urban and rural areas, representing a public health problem since microorganisms are transmitted through the inhalation of dust from their dry feces (chlamydiosis) and through ingestion of their undercooked or poorly refrigerated meat (toxoplasmosis). This study aimed to evaluate the presence of Chlamydophila psittaci and Toxoplasma gondii in pigeons from four cities in São Paulo State, Brazil. C psittaci was evaluated through hemi-nested polymerase chain reaction (hnPCR) using cloacal and tracheal swabs, whereas T. gondii specific antibodies were assessed by means of modified agglutination test (MAT), mouse brain and muscle bioassay, and polymerase chain reaction (PCR). To confirm the infection in mice, T. gondii antibodies were assayed by using indirect fluorescent antibody test (IFAT). Considering C. psittaci, 40/238 (16.8%; 95%CI 12.6-22.1%) samples were positive according to hnPCR, especially for the cities of São Paulo (42.5%) and Bauru (35%). As regards T. gondii, 12/238 (5%; 95%CI 2.9-8.6%) serum samples were positive according to MAT. of these, five samples had titer equal to 1:8; six samples, 1:16; and one sample, 1:32. Bioassay, IFAT and PCR were negative for mouse toxoplasmosis. The absence of T. gondii antibodies suggests that pigeons may be infected with a low concentration of the agent, not detected by the antigen test. Thus, C. psittaci represents an actual problem concerning bird health. (C) 2010 Elsevier B.V. All rights reserved.

Characterization of small-scale fisheries in the Camamu-Almada basin, southeast state of Bahia, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Range extension of the Peale's Free-tailed Bat Nyctinomops aurispinosus (Molossidae) in Brazil

Há uma grande lacuna no conhecimento da biologia e corologia de Nyctinomops aurispinosus. Nesta comunicação, nós apresentamos o registro mais austral deste molossídeo, realizado na cidade de Curitiba (25° 25' S e 49° 15' W, 920 m), estado do Paraná, Brasil, e sumarizamos a distribuição geográfica conhecida para a espécie na América do Sul.

The flavor problem and discrete symmetries

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Extension of the Nambu-Jona-Lasinio model predictions at high densities and temperatures using an implicit regularization scheme

Traditional cutoff regularization schemes of the Nambu-Jona-Lasinio model limit the applicability of the model to energy-momentum scales much below the value of the regularizing cutoff. In particular, the model cannot be used to study quark matter with Fermi momenta larger than the cutoff. In the present work, an extension of the model to high temperatures and densities recently proposed by Casalbuoni, Gatto, Nardulli, and Ruggieri is used in connection with an implicit regularization scheme. This is done by making use of scaling relations of the divergent one-loop integrals that relate these integrals at different energy-momentum scales. Fixing the pion decay constant at the chiral symmetry breaking scale in the vacuum, the scaling relations predict a running coupling constant that decreases as the regularization scale increases, implementing in a schematic way the property of asymptotic freedom of quantum chromodynamics. If the regularization scale is allowed to increase with density and temperature, the coupling will decrease with density and temperature, extending in this way the applicability of the model to high densities and temperatures. These results are obtained without specifying an explicit regularization. As an illustration of the formalism, numerical results are obtained for the finite density and finite temperature quark condensate and applied to the problem of color superconductivity at high quark densities and finite temperature.