Molhabilidade de material reembasador: efeito dos agentes químicos de limpeza

Risk of mechanical injuries contraindicate brushing and elect chemical agents as appropriate for daily cleaning of dentures relined with resilient materials. It was evaluated the effect of denture cleansers on the wettability of denture relining material (Dentusoft, Dental Medrano). We used 20 discs of acrylic resin thermoactivated VipiCril ® with 30mm diameter and 4mm thick, covered by 2mm Dentusoft ®. Divided into 4grupos were stored in artificial saliva at 37 +1 º C for 30 days, immersed daily for 15minutes in distilled water (GI), Corega ® Tabs (GII), a solution of sodium bicarbonate (GIII) or solution of sodium hypochlorite (GIV) after which, on the soft liner were poured 2 ml of type IV gypsum (Durone IV, Dentsply). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to analysis, showed non-normal distribution, opting for non-parametric test. Kruskal Wallis test performed at 5% significance, there was statistical difference between the groups with lower average contact angle for GII. It was concluded that the chemical cleaning Corega Tabs ® allowed a better adaptation of relining the gypsum studied.

Compatibilidade entre alginato e gesso ortodônticos: capacidade de umedecimento sob influência da desinfecção do molde

The dental trade has offered dental impression and dental stone for orthodontic use ensuring accurate models. The compatibility between these materials is defined by the wetting of the model surfaces by the mixture water/stone poured over it and the influenced by the method of disinfection of model and disinfectant solution used. It was evaluated the influence of spray disinfection with sodium hypochlorite 1% on the wettability of two commercial alginate (Jeltrate ® - Dentsply and Orthoprint ® - Zhermack) at two commercial type III gypsum (Rio ® - ME and AOBussoli Orthogesso Orthogesso ®-SA). Twenty models were fabricated for each type of alginate, which were divided into two groups (water and sodium hypochlorite), receiving respectively water and sodium hypochlorite 1% spray. Each group of models was then further divided into two subgroups, and on their surface were poured 2 ml of type III gypsum (Gesso Rio® or Orthogesso®). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to ANOVA and founded statistical significance for solutions used. It was concluded that sodium hypochlorite spray improved wettability of alginates studied.

Efeito da desinfecção e do tempo de armazenagem na molhabilidade de moldes de alginato

The cares at the manipulation of the alginate (condensation, disinfection of the impression and the time elapsed until the leak of the plaster) deserve special attention considering the great amount of distortions occurring every time the impression is not fill of plaster in a brief space of time and appropriate storage conditions. Besides its adaptation to the plaster suffers influence of the events happened after the impression is removed of the mouth. The purpose of this research was to evaluate the wetting capacity of three brands of alginate (Jeltrate™,Hydrogum™ e Orthoprint™) by the plaster type III (Rio™) under the influence of disinfection by sodium hypochlorite 1% sprays and the time of storage of 15 minutes,30 minutes, 1 hour, 6, 12 and 24 hours. There were made 60 impressions of each brand of alginate divided in two groups (water and sodium hypochlorite 1%) rearranged after the application of the sodium hypochlorite spray according to the storage time (15 or 30 minutes and 1,6,12, or 24 hours). On the surface of the impressions 2ml of plaster were flowed, proportioned and condensed in agreement with manufacturer‘s instructions. After the final setting expansion the casts were sectioned vertically and medially, regularized at the cut surface (emery paper 400) and setted for reading the contact angle at the microscope Carl Zeiss. The obtained results, submitted to statistical treatment (ANOVA) revealed significant differences when compared the employed solutions (water and sodium hypochlorite 1%) and the time of storage. The sodium hypochlorite 1% exhibited the smallest contact angles and the times of storage of 15 minutes and 6 hours the smallest and larger angles, respectively. It can be concluded that the alginate impressions exhibited larger adaptation to the plaster when disinfected by hypochlorite of sodium 1% and stocked by 15 minutes.

Effect of polymerization techniques and cleaning solution on flexural resistance of acrylic resin chemically activated

The purpose of this study was to evaluate the impact of different disinfection solutions on flexural resistance of chemically-activated acrylic resin. Test pieces were made of clear acrylic resin using a rectangular mold and employing two techniques: wet polymerization under pressure (n = 20) and dry polymerization under pressure (n = 20). Test pieces were subdivided into four equal groups: distilled water (control), sodium bicarbonate, 1% sodium hypochlorite and effervescent ats. The 30-day cycling technique consisted of immersing the test pieces in 100 ml of solution for 10 min three times a day and placing them in closed containers containing artificial saliva at 37°C. Subsequently, the flexural resistance of samples was tested. Data were analyzed using two-way analysis of variance (ANOVA) with forces serving as the dependent variables and the polymerization technique and cleaning agents as independent variables. Post hoc multiple comparisons were performed using Tukey’s test. There was no statistically significant difference in the flexural strength between the two polymerization techniques. The greatest flexural strength was observed for the effervescent tablets group followed by the control and 1% sodium hypochlorite groups which were statistically similar. Thus, the sodium bicarbonate solution caused the lowest flexural resistance of the test pieces.

Resistência de união e estabilidade de um sistema adesivo universal à dentina erodida/abrasionada após desproteinização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do veículo na remoção da pasta tri antibiótica do canal radicular

Pós-graduação em Ciência Odontólogica - FOA

Análise da interface adesiva entre pinos de fibra de vidro e dentina intrarradicular submetida à irrigação com diferentes agentes condicionantes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Local de produção, armazenamento e qualidade de sementes de soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Elaboração de pão com casca de abacate hass: valor nutricional e aceitabilidade

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação da neutralização dos efeitos citotóxicos do ácido lipoteicóico em canais radiculares

Pós-graduação em Odontologia Restauradora - ICT

Sterilization of immature blowflies (Calliphoridae) for use in larval therapy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sanitizers effect in mango pulp and peel antioxidant compounds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Conservação refrigerada de abacate 'hass' e 'fuerte' submetidos à atmosferas modificadas ativas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do Ácido Ascórbico em melões 'Orange Flesh' minimamente processados

The aim of this work was to evaluate the application of different concentrations of ascorbic acid on Orange Flesh melon. Whole Melons were sanifi ed with 500 mg L-1 of sodium hypochlorite for 10 minutes and the cuts into cubes with 100 mg L-1 for 1 minute before being tested under different concentrations of ascorbic acid (0, 1, 2 and 3%) in immersion at room temperature for 10 minutes. After drainage, the cuts were packed in PET packages lined with polyethylene fi lm of 18 µm and stored at 5 ± 1°C and 85 ± 5% of RH for 8 days, being evaluated every 2 days. Physicochemical, microbiological and sensorial analyses were performed. The experimental design utilized for the experiment was the completely randomized in factorial scheme. Ten replicates were used for non-destructive analyses and 3 replicates were used for destructive ones. The application of ascorbic acid reduced the loss of mass; the fruits presented a low population of psychrotrophic bacterias, fi lamentous, fungi and yeasts, reduction of soluble solids, pH and fi rmness and, consequently, extended postharvest life of the fruits by 2 days. The appearance, fl avor and taste were also affected. The application of 1% of ascorbic acid was the best treatment for the fresh cuts “Orange Flesh” melons.

Efeito na adesão de pinos de fibra de vidro na dentina radicular após irrigação com diferentes formulações de ácido peracético e cimentação com RelyX U200

Pós-graduação em Odontologia - FOAR