Visual control for automated aircraft collision avoidance systems

This thesis presents a new vision-based decision and control strategy for automated aircraft collision avoidance that can be realistically applied to the See and Avoid problem. The effectiveness of the control strategy positions the research as a major contribution toward realising the simultaneous operation of manned and unmanned aircraft within civilian airspace. Key developments include novel classical and visual predictive control frameworks, and a performance evaluation technique aligned with existing aviation practise and applicable to autonomous systems. The overall approach is demonstrated through experimental results on a small multirotor unmanned aircraft, and through high fidelity probabilistic simulation studies.

N,N'-Carbonyldiimidazole-mediated functionalization of superparamagnetic nanoparticles as vaccine carrier

Particulates with specific sizes and characteristics can induce potent immune responses by promoting antigen uptake of appropriate immuno-stimulatory cell types. Magnetite (Fe3O4) nanoparticles have shown many potential bioapplications due to their biocompatibility and special characteristics. Here, superparamagnetic Fe3O4 nanoparticles (SPIONs) with high magnetization value (70emug-1) were stabilized with trisodium citrate and successfully conjugated with a model antigen (ovalbumin, OVA) via N,N'-carbonyldiimidazole (CDI) mediated reaction, to achieve a maximum conjugation capacity at approximately 13μgμm-2. It was shown that different mechanisms governed the interactions between the OVA molecules and magnetite nanoparticles at different pH conditions. We evaluated as-synthesized SPION against commercially available magnetite nanoparticles. The cytotoxicity of these nanoparticles was investigated using mammalian cells. The reported CDI-mediated reaction can be considered as a potential approach in conjugating biomolecules onto magnetite or other biodegradable nanoparticles for vaccine delivery.

Time-independent charge carrier mobility in a model polymer:fullerene organic solar cell

The technique of photo-CELIV (charge extraction by linearly increasing voltage) is one of the more straightforward and popular approaches to measure the faster carrier mobility in measurement geometries that are relevant for operational solar cells and other optoelectronic devices. It has been used to demonstrate a time-dependent photocarrier mobility in pristine polymers, attributed to energetic relaxation within the density of states. Conversely, in solar cell blends, the presence or absence of such energetic relaxation on transport timescales remains under debate. We developed a complete numerical model and performed photo-CELIV experiments on the model high efficiency organic solar cell blend poly[3,6-dithiophene-2-yl-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1,4-dione-alt-naphthalene] (PDPP-TNT):[6,6]-phenyl-C71-butyric-acid-methyl-ester (PC70BM). In the studied solar cells a constant, time-independent mobility on the scale relevant to charge extraction was observed, where thermalisation of photocarriers occurs on time scales much shorter than the transit time. Therefore, photocarrier relaxation effects are insignificant for charge transport in these efficient photovoltaic devices.

Vision-based operations of a large industrial vehicle : autonomous hot metal carrier

Hot metal carriers (HMCs) are large forklift-type vehicles used to move molten metal in aluminum smelters. This paper reports on field experiments that demonstrate that HMCs can operate autonomously and in particular can use vision as a primary sensor to locate the load of aluminum. We present our complete system but focus on the vision system elements and also detail experiments demonstrating reliable operation of the materials handling task. Two key experiments are described, lasting 2 and 5 h, in which the HMC traveled 15 km in total and handled the load 80 times.

Autonomous hot metal carrier: Navigation and manipulation with a 20 tonne industrial vehicle

This paper reports work on the automation of a hot metal carrier, which is a 20 tonne forklift-type vehicle used to move molten metal in aluminium smelters. To achieve efficient vehicle operation, issues of autonomous navigation and materials handling must be addressed. We present our complete system and experiments demonstrating reliable operation. One of the most significant experiments was five-hours of continuous operation where the vehicle travelled over 8 km and conducted 60 load handling operations. Finally, an experiment where the vehicle and autonomous operation were supervised from the other side of the world via a satellite phone network are described.

Permanent shift: the topology of Didier Vermeiren's Cariatide à la Pierre

Photographic documentation of sculpture produces significant consequences for the way in which sculptural space is conceived. When viewed as discrete mediums the interaction of the photograph and its sculptural subject is always framed by notions of loss. However, when taken as a composite system, the sculpture-photograph proposes a new ontology of space. In place of the fixity of medium, we can observe a topology at play: a theory drawn from mathematics in which space is understood not as a static field but in terms of properties of connectedness, movement and differentiation. Refracted through the photographic medium, sculpture becomes not a field of fixed points in space, but rather as a fluid set of relations - a continuous sequence of multiple ‘surfaces’, a network of shifting views. This paper will develop a topological account of studio practice through an examination of the work of the contemporary Belgian sculptor Didier Vermeiren (b. 1951). Since the 1980s, Vermeiren has made extensive use of photography in his sculptural practice. By analysing a series of iterations of his work Cariatide à la Pierre (1997-1998), this paper proposes that Vermeiren’s use of photography reveals patterns of connection that expand and complicate the language of sculpture, while also emphasising the broader topology of the artist’s practice as a network of ‘backward glances’ to previous works from the artist’s oeuvre and the art-historical canon. In this context, photography is not simply a method of documentation, but rather a means of revealing the intrinsic condition of sculpture as medium shaped by dynamic patterns of connection and change. In Vermeiren’s work the sculpture-photograph, has a composite identity that exceeds straightforward categories of medium. In their place, we can observe a practice based upon the complex interactions of objects whose ontology is always underpinned by a certain contingency. It is in this fundamental mobility, that the topology of Vermeiren’s practice can be said to rest.

Autonomous hot metal carrier

This paper reports work involved with the automation of a Hot Metal Carrier — a 20 tonne forklift-type vehicle used to move molten metal in aluminium smelters. To achieve efficient vehicle operation, issues of autonomous navigation and materials handling must be addressed. We present our complete system and experiments demontrating reliable operation. One of the most significant experiments was five-hours of continuous operation where the vehicle travelled over 8 km and conducted 60 load handling operations. We also describe an experiment where the vehicle and autonomous operation were supervised from the other side of the world via a satellite phone network.

Devenir plurilingue : la perspective des littératies multiples

Abstract - English Multiple literacies refers to reading, reading the world and self. This article proposes an understanding of reading that goes beyond its definition in psychology and applied linguistics. This longitudinal project is interested in a conceptualisation of what reading is, how it functions and what it produces in becoming multilingual. Reading is explored through the lens of an empirical study involving five female pupils from senior Kindergarten to Grade 3 observed and interviewed in relation to activities at school and at home. The study took place in Ottawa schools where French is the sole language of instruction. Reading in the context of multiple literacies is conceptualised to disrupt /deterritorialise and to be immanent, offering the potentiality to go beyond what is to what could be. Becoming multilingual is a continuous movement involving networks of rhizomatic connections and reading the world and self. Résumé - Francais Les littératies multiples se réfèrent à la lecture, la lecture du monde et la lecture de soi. Cet article propose une compréhension de la lecture qui dépasse sa définition usuelle en psychologie et en linguistique appliquée. Ce projet longitudinal porte sur la conceptualisation de la lecture, son fonctionnement et ce qu’elle produit dans le devenir plurilingue. La lecture est examinée selon l’optique d’une étude empirique durant laquelle cinq écolières du jardin d’enfants à la 3e année étaient observées et interviewées par rapport à des activités à l’école et à la maison. L’étude a eu lieu dans des écoles d’Ottawa dont la seule langue d’enseignement est le français. Dans le contexte des littératies multiples, la lecture est conceptualisée comme étant perturbatrice/déterritorialisante et immanente. Elle offre la potentialité d’aller au-delà de ce qui est vers ce qui pourrait être. Devenir plurilingue est un mouvement continu faisant appel à des réseaux de connexions rhizomatiques et à la lecture du monde et de soi.

Evaluating unmanned aircraft systems for deployment in plant biosecurity

This report provides a qualitative evaluation of Unmanned Aircraft Systems (UAS) and on-board sensor technology for use in plant biosecurity in the Australian context. The more general term UAS describes both the Unmanned Aerial Vehicle (UAV) and all supporting components required to operate it. This may include a ground station, operator or pilot, and a launch and recovery device for example. The focus is to identify how and under what circumstances UAS may be useful for plant biosecurity. This can be used to help guide future decisions regarding investment in UAS for plant biosecurity.

Effect of carrier size on the dispersion of salmeterol xinafoate from interactive mixtures

The objective of this study was to determine the influence of lactose carrier size on drug dispersion of salmeterol xinafoate (SX) from interactive mixtures. SX dispersion was measured by using the fine particle fractions determined by a twin stage impinger attached to a Rotahaler1. The particle size of the lactose carrier in the SX interactive mixtures was varied using a range of commercial inhalation-grade lactoses. In addition, differing size fractions of individual lactose samples were achieved by dry sieving. The dispersion ofSXappeared to increase as the particle size of the lactose carrier decreased for the mixtures prepared from different particle size commercial samples of lactose and from different sieve fractions of the same lactose. Fine particles of lactose (<5 mm) associated with the lactose carrier were removed from the carrier surface by a wet decantation process to produce lactose samples with low but similar concentrations of fine lactose particles. The fine particle fractions of SX in mixtures prepared with the decanted lactose decreased significantly (analysis of variance, p<0.001) and the degree of dispersion became independent of the volume mean diameter of the carriers (analysis of variance, p<0.05). The dispersion behavior is therefore associated with the presence of fine adhered particles associated with the carriers and the inherent size of the carrier itself has little influence on dispersion.

India’s indigenization of military aircraft design and manufacturing: Towards a fifth-generation fighter

India’s desire to transform itself into an international military power has brought about a rapid shift in its approach to procuring military hardware. The indigenization of India’s military manufacturing capacity forms an integral part of the strategic objectives of Indian military services, with its realization being a function of significant government investment in strategic technologies. This has a number of ramifications. An indigenous Indian military capacity, particularly in the field of aviation, forms a key part of India’s ambition of achieving regional air superiority, or even supremacy, and being capable of power projection. This is particularly in response to China’s increasing presence in South Asian airspace. A burgeoning Indian military manufacturing machine based on a comparative advantage in skilled technicians and lower-cost labour, together with strategic collaboration with foreign military hardware manufacturers, may also lead to neighbouring countries looking to India as a source of competitively priced military hardware. In short, this chapter seeks to analyse the rationale behind India’s attempt to become militarily self-sufficient in the field of aviation, discuss the technical, economic and political context in which it is achieving this transformation, and assess the potential outlook of success for India’s drive to achieve self-sufficiency in the arena of military aviation. This chapter will do so by using the case of India’s attempt to develop a fifth-generation fighter aircraft.

Efectividad clínica de la intervención terapéutica sobre la mano con realidad virtual en sujetos hemipléjicos: revisión sistemática

Objetivo Revisar de forma sistemática y realizar una evaluación critica de las diferentes publicaciones existentes sobre el uso de la realidad virtual como elemento rehabilitador en la mano. Estrategias de búsqueda Se ha realizado una búsqueda en la base de datos Medline completada con búsquedas en Google Schoolar. Se ha limitado la búsqueda a 10 años de extensión, idiomas: inglés y español. Selección de estudios: se ha centrado sobre aquellos artículos relacionados con la realidad virtual y la rehabilitación funcional de la mano en el accidente cerebrovascular. Síntesis de resultados Debido a la falta de homogeneidad, no ha sido posible evaluar metodológicamente mediante instrumento Caspe. Se detectaron 200 artículos de los cuales 12 cumplen los criterios de selección de los mismos. Dichos artículos han sido agrupados en relación con diferentes criterios como son: tipo de estudio, sistema de evaluación utilizado, periféricos usados o resultados obtenidos entre otros. Conclusiones No se ha obtenido una homogeneidad conjunta sobre los artículos, por ello se debe continuar realizando avances en este ámbito. A pesar de ello, los entornos de realidad virtual pueden ser un instrumento válido para la recuperación funcional de la mano en los accidentes cerebrovasculares, no siendo aptos como elemento único rehabilitador. Abstract in English Objective To make a systematic review and critical assessment of the different existing publications on the use of virtual reality as an element in rehabilitation of the hand. Search Method A search was made in the Medline database completed with searches in Google Schoolar. The search was limited to a period of ten years, and English and Spanish languages. Study selection The study was focused on those articles related to virtual reality and the functional rehabilitation of the hand in stroke. Synthesis of results It was not possible to perform a methodological evaluation using the Caspe instrument due to lack of homogeneity. Two hundred 200 articles were found. Of these, 12 met the criteria for their selection. These articles were grouped in relation to different criteria such as: type of study, assessment system used, hardware used or outcomes results obtained, among others. Conclusions Joint homogeneity was not obtained for the articles. Therefore, progress must still be made in this area. In spite of this, virtual reality environments can be a valid tool for functional recovery of the hand in strokes but they are not adequate for use as a single rehabilitative treatment element.

Contribución de la fuerza y el dolor en la función del paciente con artrosis trapecio metacarpiana. Estudio transversal

Objetivo Establecer una posible relación entre la fuerza (Jamar), el dolor (EVA) y la capacidad funcional referida por el paciente (DASH) determinando en qué grado influyen unas en otras. Estudio observacional transversal analítico. Participantes Muestra de 72 pacientes que presentaban una artrosis trapecio metacarpiana grado 2-3 de Eaton. Los pacientes fueron reclutados cuando acudían a la Unidad de Cirugía de mano. Método Se realizaron mediciones de fuerza de agarre, pinza, valoración del dolor y funcionalidad, y se establecieron las correlaciones entre cada una de ellas. Resultados El modelo más significativo para la función (R2 =0.83) incluye la variable dolor y la fuerza. Pero es la fuerza punta contra punta la que presenta una mayor correlación con el cuestionario DASH (B-estandarizado: –57). Respecto al dolor, influye en todas las mediciones de fuerza realizadas con el dinamómetro, siendo también la fuerza de la pinza punta contra punta la que presenta una mayor correlación. Conclusiones Los hallazgos corroboran que existe una correlación significativa entre la función referida por el paciente y variables que podemos medir en consulta, como la fuerza del puño y la pinza. Pero también esta correlación es significativa entre las variables función y dolor entre sí, pero es la pinza punta contra punta la que presenta una mayor asociación con el cuestionario DASH. Abstract in English Objective To assess the relationship between muscle strength (Jama), and pain (VAS) levels with hand function (DASH) in patients with trapeziometarcapal osteoarthritis. Cross-sectional study. Participants Sample of 72 patients with osteoarthritis stage 2-3 (Eaton) and trapeziometacarpal osteoarthritis. Patients were recruited when they came to the Hand Surgery Unit. Method Grip strength, pinch, pain and hand function were measured, and correlation and regression coefficients between them were obtained. Results For function, the most significant model (R2 = 0.83) included pain and strength. But it is tip to tip pinch force which has a stronger relationship with DASH (Standardized B: –57) questionnaire. Pain also influenced strength measured with the dynamometer but it was tip to tip pinch force that was the most affected. Conclusions Findings confirm that there is a significant correlation between function referred by the patient and variables that can be measured in the clinic such as grip strength and pinch. The correlation between pain intensity and function was also significant, but tip to tip pinch strength had the greatest impact on the function.