Modelling basin level allocation of water in the Murray-Darling Basin in a world of uncertainty, Murray-Darling Program Working Papers WPM05-1, Risk and Sustainable Management Group, 8 February 2005

Abstract: The Murray-Darling Basin comprises over 1 million km2; it lies within four states and one territory; and over 12, 800 GL of irrigation water is used to produce over 40% of the nation's gross value of agricultural production. This production is used by a diverse collection of some-times mutually exclusive commodities (e.g. pasture; stone fruit; grapes; cotton and field crops). The supply of water for irrigation is subject to climatic and policy uncertainty. Variable inflows mean that water property rights do not provide a guaranteed supply. With increasing public scrutiny and environmental issues facing irrigators, greater pressure is being placed on this finite resource. The uncertainty of the water supply, water quality (salinity), combined with where water is utilised, while attempting to maximising return for investment makes for an interesting research field. The utilisation and comparison of a GAMS and Excel based modelling approach has been used to ask: where should we allocate water?; amongst what commodities?; and how does this affect both the quantity of water and the quality of water along the Murray-Darling river system?

An analysis of accommodation needs of adults with an intellectual disability in Toowoomba and surrounding areas

Introduction The objective of this study was to analyse the accommodation needs of people with intellectual disability over the age of 18 years in Toowoomba and contiguous shires. In 2004, a group of carers established Toowoomba Intellectual Disability Support Association (TIDSA) to address the issue of the lack of supported accommodation for people with intellectual disability over the age of 18 and the concerns of ageing carers. The Centre for Rural and Remote Area Health (CRRAH) was engaged by TIDSA to ascertain this need and undertook a research project funded by the Queensland Gambling Community Benefit Fund. While data specifically relating to people with intellectual disability and their carers are difficult to obtain, the Australian Bureau of Statistics report that carers of people with a disability are more likely to be female and at least 65 years of age. Projections by the National Centre for Social and Economic Modelling (NATSEM) show that disability rates are increasing and carer rates are decreasing. Thus the problem of appropriate support to the increasing number of ageing carers and those who they care for will be a major challenge to policy makers and is an issue of immediate concern. In general, what was once the norm of accommodating people with intellectual disability in large institutions is now changing to accommodating into community-based residences (Annison, 2000; Young, Ashman, Sigafoos, & Grevell, 2001). However, in Toowoomba and contiguous shires, TIDSA have noted that the availability of suitable accommodation for people with intellectual disability over the age of 18 years is declining with no new options available in an environment of increasing demand. Most effort seemed to be directed towards crisis provision. Method This study employed two phases of data gathering, the first being the distribution of a questionnaire through local service providers and upon individual request to the carers of people with intellectual disability over the age of 18. The questionnaire comprised of Likert-type items intended to measure various aspects of current and future accommodation issues. Most questions were followed with space for free-response comments to provide the opportunity for carers to further clarify and expand on their responses. The second phase comprised semi-structured interviews conducted with ten carers and ten people with intellectual disability who had participated in the Phase One questionnaire. Interviews were transcribed verbatim and subjected to content analysis where major themes were explored. Results Age and gender Carer participants in this study totalled 150. The mean age of these carers was 61.5 years and ranged from 40 – 91 years. Females comprised 78% of the sample (mean age = 61.49; range from 40-91) and 22% were male (mean age = 61.7 range from 43-81). The mean age of people with intellectual disability in our study was 37.2 years ranging from 18 – 79 years with 40% female (mean age = 39.5; range from 19-79) and 60% male (mean age = 35.6; range from 18-59). The average age of carers caring for a person over the age of 18 who is living at home is 61 years. The average age of the carer who cares for a person who is living away from home is 62 years. The overall age range of both these groups of carers is between 40 and 81 years. The oldest group of carers (mean age = 70 years) were those where the person with intellectual disability lives away from home in a large residential facility. Almost one quarter of people with an intellectual disability who currently live at home is cared for by one primary carer and this is almost exclusively a parent.

Should optional properties be used in conceptual modelling? A theory and three empirical tests

An important feature of some conceptual modelling grammars is the features they provide to allow database designers to show real-world things may or may not possess a particular attribute or relationship. In the entity-relationship model, for example, the fact that a thing may not possess an attribute can be represented by using a special symbol to indicate that the attribute is optional. Similarly, the fact that a thing may or may not be involved in a relationship can be represented by showing the minimum cardinality of the relationship as zero. Whether these practices should be followed, however, is a contentious issue. An alternative approach is to eliminate optional attributes and relationships from conceptual schema diagrams by using subtypes that have only mandatory attributes and relationships. In this paper, we first present a theory that led us to predict that optional attributes and relationships should be used in conceptual schema diagrams only when users of the diagrams require a surface-level understanding of the domain being represented by the diagrams. When users require a deep-level understanding, however, optional attributes and relationships should not be used because they undermine users' abilities to grasp important domain semantics. We describe three experiments which we then undertook to test our predictions. The results of the experiments support our predictions.

Feasibility of an evidence-based literature search service for general practitioners

Objective: To test the feasibility of an evidence-based clinical literature search service to help answer general practitioners' (GPs') clinical questions. Design: Two search services supplied GPs who submitted questions with the best available empirical evidence to answer these questions. The GPs provided feedback on the value of the service, and concordance of answers from the two search services was assessed. Setting: Two literature search services (Queensland and Victoria), operating for nine months from February 1999. Main outcome measures: Use of the service; time taken to locate answers; availability of evidence; value of the service to GPs; and consistency of answers from the two services. Results: 58 GPs asked 160 questions (29 asked one, 11 asked five or more). The questions concerned treatment (65%), aetiology (17%), prognosis (13%), and diagnosis (5%). Answering a question took a mean of 3 hours 32 minutes of personnel time (95% Cl, 2.67-3.97); nine questions took longer than 10 hours each to answer, the longest taking 23 hours 30 minutes. Evidence of suitable quality to provide a sound answer was available for 126 (79%) questions. Feedback data for 84 (53%) questions, provided by 42 GPs, showed that they appreciated the service, and asking the questions changed clinical care. There were many minor differences between the answers from the two centres, and substantial differences in the evidence found for 4/14 questions. However, conclusions reached were largely similar, with no or only minor differences for all questions. Conclusions: It is feasible to provide a literature search service, but further assessment is needed to establish its cost effectiveness.

Determinants of general practitioner use among women in Australia

This study investigates the use of general practitioner services by women in Australia. Although there is a universal health insurance system (Medicare) in Australia, there are variations in access to services and out of pocket costs for services. Survey data from 2350 mid-age (45-50 years) and 2102 older (70-75 years) women participating in the Australian Longitudinal Study on Women's Health were linked with Medicare data to provide a range of individual and contextual variables hypothesised to explain general practitioner use. Structural equation modelling showed that physical health was the most powerful explanatory factor of general practitioner use. However, after adjusting for self-reported health, out of pocket cost per consultation was inversely associated with use of services. The out of pocket cost was generally lower for women with low socioeconomic status but cost was also directly related to geographical remoteness. Women living in more remote areas had higher out of pocket costs and poorer access to services. Women who reported better access to care were more likely to be satisfied with their most recent general practice consultation and less likely to be sceptical of the value of medical care. These results show the need for health policies that improve the equitable use of general practitioner services in Australia. (C) 2001 Elsevier Science Ltd. All rights reserved.

A formal representation of assumptions in process modelling

In this work, we present a systematic approach to the representation of modelling assumptions. Modelling assumptions form the fundamental basis for the mathematical description of a process system. These assumptions can be translated into either additional mathematical relationships or constraints between model variables, equations, balance volumes or parameters. In order to analyse the effect of modelling assumptions in a formal, rigorous way, a syntax of modelling assumptions has been defined. The smallest indivisible syntactical element, the so called assumption atom has been identified as a triplet. With this syntax a modelling assumption can be described as an elementary assumption, i.e. an assumption consisting of only an assumption atom or a composite assumption consisting of a conjunction of elementary assumptions. The above syntax of modelling assumptions enables us to represent modelling assumptions as transformations acting on the set of model equations. The notion of syntactical correctness and semantical consistency of sets of modelling assumptions is defined and necessary conditions for checking them are given. These transformations can be used in several ways and their implications can be analysed by formal methods. The modelling assumptions define model hierarchies. That is, a series of model families each belonging to a particular equivalence class. These model equivalence classes can be related to primal assumptions regarding the definition of mass, energy and momentum balance volumes and to secondary and tiertinary assumptions regarding the presence or absence and the form of mechanisms within the system. Within equivalence classes, there are many model members, these being related to algebraic model transformations for the particular model. We show how these model hierarchies are driven by the underlying assumption structure and indicate some implications on system dynamics and complexity issues. (C) 2001 Elsevier Science Ltd. All rights reserved.

Design, modelling and analysis of a six component force balance for hypervelocity wind tunnel testing

A combination of modelling and analysis techniques was used to design a six component force balance. The balance was designed specifically for the measurement of impulsive aerodynamic forces and moments characteristic of hypervelocity shock tunnel testing using the stress wave force measurement technique. Aerodynamic modelling was used to estimate the magnitude and distribution of forces and finite element modelling to determine the mechanical response of proposed balance designs. Simulation of balance performance was based on aerodynamic loads and mechanical responses using convolution techniques. Deconvolution was then used to assess balance performance and to guide further design modifications leading to the final balance design. (C) 2001 Elsevier Science Ltd. All rights reserved.

Modelling cement grinding circuits

Modelling and simulation studies were carried out at 26 cement clinker grinding circuits including tube mills, air separators and high pressure grinding rolls in 8 plants. The results reported earlier have shown that tube mills can be modelled as several mills in series, and the internal partition in tube mills can be modelled as a screen which must retain coarse particles in the first compartment but not impede the flow of drying air. In this work the modelling has been extended to show that the Tromp curve which describes separator (classifier) performance can be modelled in terms of d(50)(corr), by-pass, the fish hook, and the sharpness of the curve. Also the high pressure grinding rolls model developed at the Julius Kruttschnitt Mineral Research Centre gives satisfactory predictions using a breakage function derived from impact and compressed bed tests. Simulation studies of a full plant incorporating a tube mill, HPGR and separators showed that the models could successfully predict the performance of the another mill working under different conditions. The simulation capability can therefore be used for process optimization and design. (C) 2001 Elsevier Science Ltd. All rights reserved.

Telemedicine and clinical genetics: establishing a successful service

There is a surprising lack of published experience on the use of videoconferencing in clinical genetics. Patients were randomly allocated to either a telegenetic (cases) or face-to-face (control) conventional clinic. The telegenetic consultation was done by videoconferencing, using ISDN lines at 384 kbit/s. Evaluation by the doctor and counsellor took place immediately after each appointment. The patient was asked to evaluate the appointment by telephone questionnaire about four weeks after the event. Forty-two patients were invited to participate and 33 (79%) returned their consent forms. Four patients declined to participate and were seen in ordinary face-to-face clinics. Preliminary results showed that the assessment of the telegenetics consultations by doctors, counsellors and patients was very favourable, and they responded positively when asked if they would be happy to use telemedicine in the future. For use in selected consultations, videoconferencing does appear to fulfil a useful role in clinical genetics.

Probabilistic modelling of CO2 corrosion laboratory data using neural networks

The present paper addresses two major concerns that were identified when developing neural network based prediction models and which can limit their wider applicability in the industry. The first problem is that it appears neural network models are not readily available to a corrosion engineer. Therefore the first part of this paper describes a neural network model of CO2 corrosion which was created using a standard commercial software package and simple modelling strategies. It was found that such a model was able to capture practically all of the trends noticed in the experimental data with acceptable accuracy. This exercise has proven that a corrosion engineer could readily develop a neural network model such as the one described below for any problem at hand, given that sufficient experimental data exist. This applies even in the cases when the understanding of the underlying processes is poor. The second problem arises from cases when all the required inputs for a model are not known or can be estimated with a limited degree of accuracy. It seems advantageous to have models that can take as input a range rather than a single value. One such model, based on the so-called Monte Carlo approach, is presented. A number of comparisons are shown which have illustrated how a corrosion engineer might use this approach to rapidly test the sensitivity of a model to the uncertainities associated with the input parameters. (C) 2001 Elsevier Science Ltd. All rights reserved.