889 resultados para SUSTAINED ATTENTION
Resumo:
The objective of this work was to evaluate the effect of sustained swimming and dietary protein levels on growth and hematological responses of juvenile pacu (Piaractus mesopotamicus). A completely randomized design was used in a 3x2 factorial arrangement, with three levels of dietary protein (24, 28, and 32% crude protein), two rearing conditions (sustained swimming or motionless water), and 15 replicates. Fish were subjected to sustained swimming at the velocity of two body lengths per second (2 BL s-1), for 45 days. The level of dietary protein and the swimming conditions affected the performance, growth, and hematological profile of pacu. Swimming conditions influenced nutritional factors, increasing daily weight gain, specific growth rate, number of erythrocytes, mean corpuscular volume, and mean corpuscular hemoglobin. Fish under sustained swimming and fed with 24% crude protein showed better growth performance, with higher specific growth rate (4.11±0.88) and higher daily weight gain (2.19±0.47 g per day). Sustained swimming can increase the productive performance of pacu and simultaneously reduce dietary protein levels.
Resumo:
RESUME Les maladies cardio-vasculaires représentent la cause la plus importante de mortalité et de morbidité dans les pays occidentaux. La thérapie génique offre une nouvelle approche au traitement de ces maladies. L'expression de gènes protecteurs dans le myocarde par des technologies de transfert génique peut améliorer la fonction ventriculaire lors de l'insuffisance cardiaque ou stimuler la formation de nouveaux vaisseaux dans la maladie coronarienne. Etant donné qu'une majorité des maladies cardiaques sont des maladies chroniques, l'expression durable du gène thérapeutique introduit dans le coeur est souhaitable dans de nombreux cas. Malheureusement, l'utilité des vecteurs de transfert génique les plus utilisés en thérapie génique cardiovasculaire est limitée par une performance faible (ADN plasmidique) et une courte durée d'expression (adénovirus). Récemment, des vecteurs de transfert génique dérivés des lentivirus, une sous-famille des rétrovirus, ont retenu l'attention de la communauté scientifique en raison de leur capacité à exprimer des gènes à long terme. Contrairement aux vecteurs rétroviraux traditionnels, les vecteurs lentiviraux transduisent des gènes même dans des cellules qui ne se divisent pas, ce qui est le cas des cardiomyocytes adultes. Ces vecteurs présentent un profil de biosécurité comparable à celui des vecteurs rétroviraux traditionnels. Nous avons donc décidé de tester l'utilité des vecteurs lentiviraux pour le transfert génique dans des cardiomyocytes de rat adulte in vitro et in vivo. Plusieurs versions de vecteurs lentiviraux contenant différent promoteurs ont été construites. Ces vecteurs contenant le gène marqueur EGFP (enhanced green fluorescent protein) ont été testés dans des cardiomyocytes de rat in vitro, ainsi que dans des coeurs de rat in vivo. Le but de ces expériences était de déterminer la durée de l'expression du transgène après injection intramyocardique chez le rat. Pour ce faire, nous avons développé une technique ELISA pour détecter la protéine EGFP dans des extraits de tissu cardiaque. Les résultats ont montré que la protéine EGFP était encore présente à des niveaux significatifs jusqu'à dix semaines après l'injection de vecteurs lentiviraux, alors que l'expression transgénique obtenue avec un vecteur adénoviral traditionnel a été plus limitée dans le temps. Ces résultats démontrent la capacité des vecteurs lentiviraux à exprimer des gènes d'intérêt de manière performante et stable dans le cur de rat adulte in vivo. SUMMARY Cardiovascular diseases are the first cause of morbidity and mortality in Western countries. Gene therapy offers a new approach to these diseases. Expression of therapeutic genes in the myocardium by gene transfer technologies can improve ventricular function in heart failure and stimulate neovascularization in coronary disease. Chronic heart diseases likely require sustained expression of the therapeutic gene within the heart itself. Unfortunately, the most commonly used vectors in cardiovascular gene therapy, i.e. plasmid DNA and recombinant adenovirus vectors, are limited by poor DNA uptake and transient transgene expression, respectively. Recently, lentivirus-derived vectors have attracted much interest because of their ability to achieve long-term transgene expression. In contrast to traditional retroviral vectors, lentiviral vectors are also able to transduce non- dividing cells, while presenting a comparable biosafety profile. Adult cardiomyocytes are terminally differentiated cells that do not divide under normal conditions. For these reasons, we have decided to evaluate the efficiency of lentiviral vectors for gene-transduction of adult cardiomyocytes both in vitro and in vivo. We constructed various types of lentiviral vectors containing various promoters. Vectors encoding EGFP as a reporter gene were tested in rat cardiomyocytes in vitro and in rat hearts in vivo. The aim of the experiments involved in this thesis work was to determine the duration of the expression of the transgene after rat intramyocardial injection using a quantitative assay. Therefore, an ELISA technique was set up to measure the EGFP protein in rat heart tissue extracts. Our results showed that the EGFP protein was still present at significant levels at ten weeks after lentiviral vector injection, whereas the duration of expression with adenoviral vectors was shorter. These results demonstrate that lentiviral vectors efficiently deliver genes and achieve sustained transgene expression in adult rat cardiomyocytes in vivo.
Resumo:
The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.
Resumo:
STUDY OBJECTIVES: Sleep fragmentation (SF) is an integral feature of sleep apnea and other prevalent sleep disorders. Although the effect of repetitive arousals on cognitive performance is well documented, the effects of long-term SF on electroencephalography (EEG) and molecular markers of sleep homeostasis remain poorly investigated. To address this question, we developed a mouse model of chronic SF and characterized its effect on EEG spectral frequencies and the expression of genes previously linked to sleep homeostasis including clock genes, heat shock proteins, and plasticity-related genes. DESIGN: N/A. SETTING: Animal sleep research laboratory. PARTICIPANTS: Sixty-six C57BL6/J adult mice. INTERVENTIONS: Instrumental sleep disruption at a rate of 60/h during 14 days. MEASUREMENTS AND RESULTS: Locomotor activity and EEG were recorded during 14 days of SF followed by recovery for 2 days. Despite a dramatic number of arousals and decreased sleep bout duration, SF minimally reduced total quantity of sleep and did not significantly alter its circadian distribution. Spectral analysis during SF revealed a homeostatic drive for slow wave activity (SWA; 1-4 Hz) and other frequencies as well (4-40 Hz). Recordings during recovery revealed slow wave sleep consolidation and a transient rebound in SWA, and paradoxical sleep duration. The expression of selected genes was not induced following chronic SF. CONCLUSIONS: Chronic SF increased sleep pressure confirming that altered quality with preserved quantity triggers core sleep homeostasis mechanisms. However, it did not induce the expression of genes induced by sleep loss, suggesting that these molecular pathways are not sustainably activated in chronic diseases involving SF.