Analise do desenvolvimento das praticas urbanas de lazer relacionadas a produção cultural no periodo nacional-desenvolvimentista a globalização atraves da Teoria da Ação Comunicativa

Universidade Estadual de Campinas . Faculdade de Educação Física

The natural force density method for the shape finding of taut structures

This work presents, with the aid of the natural approach, an extension of the force density method for the initial shape finding of cable and membrane structures, which leads to the solution of a system of linear equations. This method, here called the natural force density method, preserves the linearity which characterizes the original force density method. At the same time, it overcomes the difficulties that the original procedure presents to cope with irregular triangular finite element meshes. Furthermore, if this method is applied iteratively in the lines prescribed herewith, it leads to a viable initial configuration with a uniform, isotropic plane Cauchy stress state. This means that a minimal surface for the membrane can be achieved through a succession of equilibrated configurations. Several numerical examples illustrate the simplicity and robustness of the method. (C) 2008 Elsevier B.V. All rights reserved.

Electronic scraps - Recovering of valuable materials from parallel wire cables

Every year, the number of discarded electro-electronic products is increasing. For this reason recycling is needed, to avoid wasting non-renewable natural resources. The objective of this work is to study the recycling of materials from parallel wire cable through Unit operations of mineral processing. Parallel wire cables are basically composed of polymer and copper. The following unit operations were tested: grinding, size classification, dense medium separation, electrostatic separation, scrubbing, panning, and elutriation. It was observed that the operations used obtained copper and PVC concentrates with a low degree of cross contamination. It was Concluded that total liberation of the materials was accomplished after grinding to less than 3 mm, using a cage mill. Separation using panning and elutriation presented the best results in terms of recovery and cross contamination. (C) 2007 Elsevier Ltd. All rights reserved.

Kids in tram during No War Toys Christmas outing

Woman and children inside a tram during No War Toys Christmas party in Brisbane, Australia.

Tram at South Brisbane station, Brisbane Australia

Three men inspecting tram at South Brisbane station, Brisbane Australia, during No War Toys outing. WILPF (Womens International League for Peace and Freedom) banner can be seen on the front of the tram. The Women's International League for Peace and Freedom was founded in 1915. It works towards disarmament, political solutions to international conflicts, equal participation of women in activities, economic justice and the elimination of racism and discrimination. To achieve these goals, the Women's International League for Peace and Freedom organises meetings, conferences and campaigns.

Tram leaving South Brisbane Station

Tram leaving South Brisbane Station, Brisbane, Australia during "No war toys" outing.

Onlookers on buildings during the Youth Campaign against Conscription, Brisbane, Australia

Onlookers on buildings during the Youth Campaign against Conscription, Brisbane, Australia on March 24 1966. Paddy wagons, police and a tram can be seen on the corner of Queen and Albert Streets Brisbane. Facade of T & G corner with Spiers Chemists, Mimi building and NM centre can be seen in the background.

Combined Railways Union float during Mayday procession 1965 Brisbane Australia

Combined Railways Union float during Mayday procession in 1965, Brisbane, Australia. Banners read Stop menacing hand of Vietnam War and 50,000 people used Beenleigh Southport line in 1963.

A review of the Apocreadiidae Skrjabin, 1942 (Trematoda : Digenea) and description of Australian species

The Apocreadiidae is reviewed and is considered to include genera recognised previously within the families Apocreadiidae, Homalometridae, Schistorchiidae, Sphincterostomatidae and Trematobrienidae. Key features of the family are extensive vitelline follicles, eye-spot pigment dispersed in forebody, I-shaped excretory vesicle, no cirrus-sac and genital pore opening immediately anterior to the ventral sucker (usually) or immediately posterior to it (Postporus Manter, 1949). Three subfamilies and 18 genera are recognised within the Apocreadiidae. The Apocreadiinae comprises Homalometron Stafford, 1904 (new syn. Barbulostomum Ramsey, 1965), Callohelmis n. g., Choanodera Manter, 1940, Crassicutis Manter, 1936, Dactylotrema Bravo-Hollis & Manter, 1957, Marsupioacetabulum Yamaguti, 1952, Microcreadium Simer, 1929, Myzotus Manter, 1940, Neoapocreadium Siddiqi & Cable, 1960, Neomegasolena Siddiqi & Cable, 1960, Pancreadium Manter, 1954, Procaudotestis Szidat, 1954 and Trematobrien Dollfus, 1950. The Schistorchiinae comprises Schistorchis Luhe, 1906, Sphincterostoma Yamaguti, 1937, Sphincteristomum Oshmarin, Mamaev & Parukhin, 1961 and Megacreadium Nagaty, 1956. The Postporinae comprises only Postporus. A key to subfamilies and genera of the Apocreadiidae is provided. It is argued that there is no convincing basis for the recognition of the genus Apocreadium Manter, 1937 and all its constituent species are combined with Homalometron. The following new combinations are proposed for species previously recognised within Apocreadium: Homalometron balistis (Manter, 1947), H. caballeroi (Bravo-Hollis, 1953), H. cryptum (Overstreet, 1969), H. longisinosum (Manter, 1937), H. manteri (Overstreet, 1970), H. mexicanum (Manter, 1937) and H. vinodae (Ahmad, 1985). Apocreadium uroproctoferum Sogandares-Bernal, 1959 is found to lack a uroproct and is made a synonym of H. mexicanum. Homalometron verrunculi nom. nov. is proposed to replace the secondarily pre-occupied H. caballeroi Lamothe-Argumedo, 1965. Barbulostomum is made a synonym of Homalometron and H. cupuloris (Ramsey, 1965) n. comb. is proposed. Neochoanodera is made a synonym of Choanodera and Choanodera ghanensis (Fischthal & Thomas, 1970) n. comb. is proposed. Species within the Apocreadiinae and Postporinae are reviewed and the following are recorded or described from Australian fishes: Homalometron wrightae n. sp. from Achlyopa nigra (Macleay), H. synagris (Yamaguti, 1953) n. comb. from Scolopsis monogramma (Cuvier), H. stradbrokensis n. sp. from Gerres subfasciatus Cuvier, Marsupioacetabulum opallioderma n. sp. from G. subfasciatus, Neoapocreadium karwarensis (Hafeezullah, 1970) n. comb. from G. subfasciatus, N. splendens n. sp. from S. monogramma and Callohelmis pichelinae n. g., n. sp. from Hemigymnus melapterus (Bloch), H. fasciatus (Bloch), Stethojulis bandanensis (Bleeker) andChoerodon venustus (De Vis). Callohelmis is recognised by the combination of absence of tegumental spines, caeca terminating midway between the testes and posterior end of body, ventral sucker enclosed in a tegumental pouch, prominent muscles radiating through the body from the ventral sucker, vitelline follicles not extending into the forebody, and a very short excretory vesicle that opens ventrally. New combinations for species previously recognised within Crassicutis are proposed as follows: Neoapocreadium caranxi (Bilqees, 1976) n. comb., N. gerridis (Nahhas & Cable, 1964) n. comb., N. imtiazi (Ahmad, 1984) n. comb. and N. marina (Manter, 1947) n. comb. The host-specificity and zoogeography of the Apocreadiinae are considered.

A review of the Arhythmacanthidae (Acanthocephala) with a description of Heterosentis hirsutus n. sp. from Cnidoglanis macrocephala (Plotosidae) in Australia

Heterosentis hirsutus n. sp. is described from Cnidoglanis macrocephalo (Siluriformes: Plotosidae) from the Swan Estuary, Western Australia. It is distinguished by having 14 longitudinal rows of 6-7 hooks per row on the proboscis, a trunk armed anteriorly and posteriorly (=genital spines) with minute spines and lemnisci that may extend to the poster;or margin of the proboscis receptacle The new species also has prominent fragmented nuclei in its trunk well. New information is given for Heterosentis plotosi Yamoguti, 1935 from Plotosus lineatus (Siluriformes: Plotosidae) and H. poraplagusiarum (Nickol, 1972) Amin, 1985 from Paraplogusia guttata (Pleuronectiformes: Cynoglossidoe), both from Queensland. A key to the species of Heterosentis Van Cleave, 1931 is provided. The Arhythmacanthidae subfamilies are reviewed: there is little utility in the recognition of these taxa because of the small number of genera involved and the validity/ of the characters on which they ore based is in doubt, particularly whether trunk spines are present or absent. Only Acanthocephaloides Meyer, 1932, Breizocanthus Golvon, 1969, Euzetocanthus Golvan & Houin, 1964, Heterosentis, Hypoechinorhynchus Yamaguti, 1939 and Paracanthocepholoides Golvan, 1969 of the Arhythmacanthidae are considered valid. A key to these genera is provided. The monotypic genus Neocanthocepholoides Cable & Quick, 1954 is considered a new synonym of Acanthocephaloides thus creating Acanthocephaloides spinicaudatus (Cable & Quick, 1954) n. comb. Arhythmocanthus Yamaguti, 1935 is maintained as a synonym of Heterosentis because the distinction between two and three hook types is made equivocal when the transition between the opical and subapical hooks is gradual.

Asymmetric dimethylarginine endogenous inhibition of nitric oxide synthase causes differential vasculature effects

Background: Asymmetric dimethylarginine (ADMA), produced during protein metabolism, is an endogenous inhibitor of nitric oxide synthase, but little is known about its direct vasoactive properties in different arterial beds. Material/Methods: Segments of canine coronary, renal, and femoral arteries were pretreated with increasing concentrations of ADMA, and endothelial function was evaluated in organ chambers. Results: In precontracted canine coronary arteries, the highest concentrations of ADMA inhibited endothelium-dependent relaxation mediated by acetylcholine (n=7), but no concentration of ADMA inhibited receptor-independent relaxation mediated by calcium ionophore (n=7) (P<.001). The effect of ADMA on acetylcholine-mediated relaxation was shown to be competitive inhibition of the nitric oxide synthase pathway, because the addition of L-arginine (10(-3) M), but not D-arginine (101 M), reversed the effect produced by 10(-5) M ADMA. Further, ADMA did not alter endothelium-independent relaxation mediated by sodium nitroprusside (10(-9) to 10(-6) M; n=7). Femoral arteries (n=7) and renal arteries (n=7) were more sensitive to ADMA than were coronary arteries, and they demonstrated significant ADMA inhibition to receptor dependent relaxation induced by acetylcholine (P=.03 and P=.01, respectively) and to receptor-independent relaxation induced by calcium ionophore (P=.02 and P=.01, respectively). Conclusions: Endothelium-dependent relaxation mediated by ADMA is more marked in femoral and renal arteries than in coronary arteries. The response in coronary arteries may be overall protective. Considering these different effects in various artery types, the role of ADMA as a confiable and specific cardiovascular risk factor is questioned.

Fibras óticas de plástico em redes de acesso

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Eletrónica e Telecomunicações

Análise e optimização global de uma linha de extrusão

Os objectivos principais deste estudo são a caracterização de uma das linhas de extrusão existentes na Cabelte, nomeadamente a linha de extrusão de referência EP5, composta por duas extrusoras. Pretende-se fazer a determinação de indicadores energéticos e de processo e a optimização do consumo energético, no que diz respeito à energia consumida e às perdas térmicas relativas a esta linha. Para fazer a monitorização da linha de extrusão EP5 foi colocado no quadro geral dessa linha um equipamento central de medida de forma a ser possível a sua monitorização. No entanto, para a extrusora auxiliar as medições foram efectuadas com uma pinça amperimétrica e um fasímetro. Foram também efectuados ensaios onde foi avaliada a quantidade de material transformada, para isso foi utilizado um equipamento de pesagem, doseador gravimétrico aplicado nas extrusoras. As medições de temperatura para os cálculos das perdas térmicas da extrusora principal e para a caracterização dos materiais plásticos, foram efectuadas utilizando um termómetro digital. Foram efectuados ensaios de débito às extrusoras auxiliar e principal e foi estudada a variação do factor de potência em função da rotação do fuso. Na perspectiva do utilizador final a optimização para a utilização racional de energia está na redução de encargos da factura de energia eléctrica. Essa factura não depende só da quantidade mas também do modo temporal como se utiliza essa energia, principalmente a energia eléctrica, bastante dependente do período em que é consumida. Uma metodologia diferente no planeamento da produção, contemplando o fabrico dos cabos com maior custo específico nas horas de menor custo energético, implicaria uma redução dos custos específicos de 18,7% para o horário de verão e de 20,4% para o horário de inverno. Os materiais de revestimento utilizados (PE e PVC), influenciam directamente os custos energéticos, uma vez que o polietileno (PE) apresenta sempre valores de entalpia superiores (0,317 kWh/kg e 0,281 kWh/kg)) e necessita de temperaturas de trabalho mais elevadas do que o policloreto de vinilo (PVC) (0,141 kWh/kg e 0,124 kWh/kg). O consumo específico tendencialmente diminui à medida que aumenta a rotação do fuso, até se atingir o valor de rotação óptimo, a partir do qual esta tendência se inverte. O cosφ para as duas extrusoras em estudo, aumenta sempre com o aumento de rotação do fuso. Este estudo permitiu avaliar as condições óptimas no processo de revestimento dos cabos, de forma a minimizarmos os consumos energéticos. A redução de toda a espécie de desperdícios (sobre consumos, desperdício em purgas) é uma prioridade de gestão que alia também a eficácia à eficiência, e constitui uma ferramenta fundamental para assegurar o futuro da empresa. O valor médio lido para o factor de potência (0,38) da linha EP5, valor extremamente baixo e que vem associado à energia reactiva, além do factor económico que lhe está inerente, condiciona futuras ampliações. A forma de se corrigir o factor de potência é instalando uma bateria de condensadores de 500 kVAr. Considerando o novo sistema tarifário aplicado à energia reactiva, vamos ter um ganho de 36167,4 Euro/ano e o período de retorno de investimento é de 0,37 ano (4,5 meses). Esta medida implica também uma redução anual na quantidade de CO2 emitida de 6,5%. A quantificação das perdas térmicas é importante, pois só desta forma se podem definir modos de actuação de forma a aumentar a eficiência energética. Se não existir conhecimento profundo dos processos e metodologias correctas, não podem existir soluções eficientes, logo é importante medir antes de avançar com qualquer medida de gestão.

Influence of wearing an unstable shoe construction on compensatory control of posture

This study investigated the influence of wearing unstable shoe construction (WUS) on compensatory postural adjustments (CPA) associated with external perturbations. Thirty-two subjects stood on a force platform resisting an anterior-posterior horizontal force applied to a pelvic belt via a cable, which was suddenly released. They stood under two conditions: barefoot and WUS. The electromyographic (EMG) activity of gastrocnemius medialis, tibialis anterior, rectus femoris, biceps femoris, rectus abdominis, and erector spinae muscles and the center of pressure (CoP) displacement were acquired to study CPA. The EMG signal was used to assess individual muscle activity and latency, antagonist co-activation and reciprocal activation at joint and muscle group levels. Compared to barefoot, WUS led to: (1) increased gastrocnemius medialis activity, (2) increased total agonist activity, (3) decreased antagonist co-activation at the ankle joint and muscle group levels, (4) increased reciprocal activation at the ankle joint and muscle group levels, and (5) decrease in all muscle latencies. No differences were observed in CoP displacement between conditions. These findings demonstrate that WUS led to a reorganization of the postural control system associated to improved performance of some components of postural control responses.

Engineering real-time applications with WorldFIP: tools and analysis

WorldFIP is standardised as European Norm EN 50170 - General Purpose Field Communication System. Field communication systems (fieldbuses) started to be widely used as the communication support for distributed computer-controlled systems (DCCS), and are being used in all sorts of process control and manufacturing applications within different types of industries. There are several advantages in using fieldbuses as a replacement of for the traditional point-to-point links between sensors/actuators and computer-based control systems. Indeed they concern economical ones (cable savings) but, importantly, fieldbuses allow an increased decentralisation and distribution of the processing power over the field. Typically DCCS have real-time requirements that must be fulfilled. By this, we mean that process data must be transferred between network computing nodes within a maximum admissible time span. WorldFIP has very interesting mechanisms to schedule data transfers. It explicit distinguishes to types of traffic: periodic and aperiodic. In this paper we describe how WorldFIP handles these two types of traffic, and more importantly, we provide a comprehensive analysis for guaranteeing the real-time requirements of both types of traffic. A major contribution is made in the analysis of worst-case response time of aperiodic transfer requests.