Opinion de Garat, sur la résolution du 4 nivose an 7, relative aux prises maritimes : séance du 2 ventose an 7 ([Reprod.])

Collection : Les archives de la Révolution française ; 11.396

A wavelet-based method for the determination of the relative resolution between remotely sensed images

Spatial resolution is a key parameter of all remote sensing satellites and platforms. The nominal spatial resolution of satellites is a well-known characteristic because it is directly related to the area in ground that represents a pixel in the detector. Nevertheless, in practice, the actual resolution of a specific image obtained from a satellite is difficult to know precisely because it depends on many other factors such as atmospheric conditions. However, if one has two or more images of the same region, it is possible to compare their relative resolutions. In this paper, a wavelet-decomposition-based method for the determination of the relative resolution between two remotely sensed images of the same area is proposed. The method can be applied to panchromatic, multispectral, and mixed (one panchromatic and one multispectral) images. As an example, the method was applied to compute the relative resolution between SPOT-3, Landsat-5, and Landsat-7 panchromatic and multispectral images taken under similar as well as under very different conditions. On the other hand, if the true absolute resolution of one of the images of the pair is known, the resolution of the other can be computed. Thus, in the last part of this paper, a spatial calibrator that is designed and constructed to help compute the absolute resolution of a single remotely sensed image is described, and an example of its use is presented.

Simulations in evolution. II. Relative fitness and the propagation of mutants.

In Neo-Darwinism, variation and natural selection are the two evolutionary mechanisms which propel biological evolution. Our previous article presented a histogram model [1] consisting in populations of individuals whose number changed under the influence of variation and/or fitness, the total population remaining constant. Individuals are classified into bins, and the content of each bin is calculated generation after generation by an Excel spreadsheet. Here, we apply the histogram model to a stable population with fitness F(1)=1.00 in which one or two fitter mutants emerge. In a first scenario, a single mutant emerged in the population whose fitness was greater than 1.00. The simulations ended when the original population was reduced to a single individual. The histogram model was validated by excellent agreement between its predictions and those of a classical continuous function (Eqn. 1) which predicts the number of generations needed for a favorable mutation to spread throughout a population. But in contrast to Eqn. 1, our histogram model is adaptable to more complex scenarios, as demonstrated here. In the second and third scenarios, the original population was present at time zero together with two mutants which differed from the original population by two higher and distinct fitness values. In the fourth scenario, the large original population was present at time zero together with one fitter mutant. After a number of generations, when the mutant offspring had multiplied, a second mutant was introduced whose fitness was even greater. The histogram model also allows Shannon entropy (SE) to be monitored continuously as the information content of the total population decreases or increases. The results of these simulations illustrate, in a graphically didactic manner, the influence of natural selection, operating through relative fitness, in the emergence and dominance of a fitter mutant.

Influence of configurational atomic order on the relative stability of bcc and close-packed structures in Cu-based alloys

We present a study of the influence of atomic order on the relative stability of the bcc and the 18R martensitic structures in a Cu2.96Al0.92Be0.12 crystal. Calorimetric measurements have shown that disorder increases the stability of the 18R phase, contrary to what happens in Cu-Zn-Al alloys for which it is the bcc phase that is stabilized by disordering the system. This different behavior has been explained in terms of a model recently reported. We have also proved that the entropy change at the martensitic transition is independent of the state of atomic order of the crystal, as predicted theoretically. Our results suggest that differences in the vibrational spectrum of the crystal due to different states of atomic order must be equal in the bcc and in the close-packed phases.

Three essays in financial economics: asset pricing, optimal portfolio selection and financial integration

Executive Summary The unifying theme of this thesis is the pursuit of a satisfactory ways to quantify the riskureward trade-off in financial economics. First in the context of a general asset pricing model, then across models and finally across country borders. The guiding principle in that pursuit was to seek innovative solutions by combining ideas from different fields in economics and broad scientific research. For example, in the first part of this thesis we sought a fruitful application of strong existence results in utility theory to topics in asset pricing. In the second part we implement an idea from the field of fuzzy set theory to the optimal portfolio selection problem, while the third part of this thesis is to the best of our knowledge, the first empirical application of some general results in asset pricing in incomplete markets to the important topic of measurement of financial integration. While the first two parts of this thesis effectively combine well-known ways to quantify the risk-reward trade-offs the third one can be viewed as an empirical verification of the usefulness of the so-called "good deal bounds" theory in designing risk-sensitive pricing bounds. Chapter 1 develops a discrete-time asset pricing model, based on a novel ordinally equivalent representation of recursive utility. To the best of our knowledge, we are the first to use a member of a novel class of recursive utility generators to construct a representative agent model to address some long-lasting issues in asset pricing. Applying strong representation results allows us to show that the model features countercyclical risk premia, for both consumption and financial risk, together with low and procyclical risk free rate. As the recursive utility used nests as a special case the well-known time-state separable utility, all results nest the corresponding ones from the standard model and thus shed light on its well-known shortcomings. The empirical investigation to support these theoretical results, however, showed that as long as one resorts to econometric methods based on approximating conditional moments with unconditional ones, it is not possible to distinguish the model we propose from the standard one. Chapter 2 is a join work with Sergei Sontchik. There we provide theoretical and empirical motivation for aggregation of performance measures. The main idea is that as it makes sense to apply several performance measures ex-post, it also makes sense to base optimal portfolio selection on ex-ante maximization of as many possible performance measures as desired. We thus offer a concrete algorithm for optimal portfolio selection via ex-ante optimization over different horizons of several risk-return trade-offs simultaneously. An empirical application of that algorithm, using seven popular performance measures, suggests that realized returns feature better distributional characteristics relative to those of realized returns from portfolio strategies optimal with respect to single performance measures. When comparing the distributions of realized returns we used two partial risk-reward orderings first and second order stochastic dominance. We first used the Kolmogorov Smirnov test to determine if the two distributions are indeed different, which combined with a visual inspection allowed us to demonstrate that the way we propose to aggregate performance measures leads to portfolio realized returns that first order stochastically dominate the ones that result from optimization only with respect to, for example, Treynor ratio and Jensen's alpha. We checked for second order stochastic dominance via point wise comparison of the so-called absolute Lorenz curve, or the sequence of expected shortfalls for a range of quantiles. As soon as the plot of the absolute Lorenz curve for the aggregated performance measures was above the one corresponding to each individual measure, we were tempted to conclude that the algorithm we propose leads to portfolio returns distribution that second order stochastically dominates virtually all performance measures considered. Chapter 3 proposes a measure of financial integration, based on recent advances in asset pricing in incomplete markets. Given a base market (a set of traded assets) and an index of another market, we propose to measure financial integration through time by the size of the spread between the pricing bounds of the market index, relative to the base market. The bigger the spread around country index A, viewed from market B, the less integrated markets A and B are. We investigate the presence of structural breaks in the size of the spread for EMU member country indices before and after the introduction of the Euro. We find evidence that both the level and the volatility of our financial integration measure increased after the introduction of the Euro. That counterintuitive result suggests the presence of an inherent weakness in the attempt to measure financial integration independently of economic fundamentals. Nevertheless, the results about the bounds on the risk free rate appear plausible from the view point of existing economic theory about the impact of integration on interest rates.

Application of fuzzy-rule-based postprocessing to correlation methods in pattern recognition

One of the most important problems in optical pattern recognition by correlation is the appearance of sidelobes in the correlation plane, which causes false alarms. We present a method that eliminate sidelobes of up to a given height if certain conditions are satisfied. The method can be applied to any generalized synthetic discriminant function filter and is capable of rejecting lateral peaks that are even higher than the central correlation. Satisfactory results were obtained in both computer simulations and optical implementation.

Fuzzy logic applied to the modeling of water dynamics in an Oxisol in northeastern Brazil

Modeling of water movement in non-saturated soil usually requires a large number of parameters and variables, such as initial soil water content, saturated water content and saturated hydraulic conductivity, which can be assessed relatively easily. Dimensional flow of water in the soil is usually modeled by a nonlinear partial differential equation, known as the Richards equation. Since this equation cannot be solved analytically in certain cases, one way to approach its solution is by numerical algorithms. The success of numerical models in describing the dynamics of water in the soil is closely related to the accuracy with which the water-physical parameters are determined. That has been a big challenge in the use of numerical models because these parameters are generally difficult to determine since they present great spatial variability in the soil. Therefore, it is necessary to develop and use methods that properly incorporate the uncertainties inherent to water displacement in soils. In this paper, a model based on fuzzy logic is used as an alternative to describe water flow in the vadose zone. This fuzzy model was developed to simulate the displacement of water in a non-vegetated crop soil during the period called the emergency phase. The principle of this model consists of a Mamdani fuzzy rule-based system in which the rules are based on the moisture content of adjacent soil layers. The performances of the results modeled by the fuzzy system were evaluated by the evolution of moisture profiles over time as compared to those obtained in the field. The results obtained through use of the fuzzy model provided satisfactory reproduction of soil moisture profiles.

Growth decrease in Alpine whitefish: investigating the relative contribution of fishing induced selection and environmental change and its implication for conservation measures

La pression exercée par les activités humaines menace pratiquement tous les écosystèmes aquatiques du globe. Ainsi, sous l'effet de divers facteurs tels que la pollution, le réchauffement climatique ou encore la pêche industrielle, de nombreuses populations de poissons ont vu leurs effectifs chuter et divers changements morphologiques ont été observés. Dans cette étude, nous nous sommes intéressés à une menace particulière: la sélection induite par la pêche sur la croissance des poissons. En effet, la génétique des populations prédit que la soustraction régulière des individus les plus gros peut entraîner des modifications rapides de certains traits physiques comme la croissance individuelle. Cela a par ailleurs été observé dans de nombreuses populations marines ou lacustres, dont les populations de féras, bondelles et autres corégones des lacs suisses. Toutefois, malgré un nombre croissant d'études décrivant ce phénomène, peu de plans de gestion en tiennent compte, car l'importance des effets génétiques liés à la pêche est le plus souvent négligée par rapport à l'impact des changements environnementaux. Le but premier de cette étude a donc été de quantifier l'importance des facteurs génétiques et environnementaux. Dans le premier chapitre, nous avons étudié la population de palée du lac de Joux (Coregonus palaea). Nous avons déterminé les différentiels de sélection dus à la pêche, c'est-à-dire l'intensité de la sélection sur le taux de croissance, ainsi que les changements nets de croissance au cours du temps. Nous avons observé une baisse marquée de croissance et un différentiel de sélection important indiquant qu'au moins 30% de la diminution de croissance observée était due à la pression de sélection induite par la pêche. Dans le deuxième chapitre, nous avons effectué les mêmes analyses sur deux espèces proches du lac de Brienz (C. albellus et C. fatioi) et avons observé des effets similaires dont l'intensité était spécifique à chaque espèce. Dans le troisième chapitre, nous avons analysé deux autres espèces : C. palaea et C. confusus du lac de Bienne, et avons constaté que le lien entre la pression de sélection et la diminution de croissance était influencé par des facteurs environnementaux. Finalement, dans le dernier chapitre, nous avons étudié les effets potentiels de différentes modifications de la taille des mailles des filets utilisés pour la pêche à l'aide de modèles mathématiques. Nous concluons que la pêche a un effet génétique non négligeable (et donc peu réversible) sur la croissance individuelle dans les populations observée, que cet effet est lié à la compétition pour la nourriture et à la qualité de l'environnement, et que certaines modifications simples de la taille des mailles des filets de pêche pourraient nettement diminuer l'effet de sélection et ainsi ralentir, voir même renverser la diminution de croissance observée.

Espectros Vis-NIR do Solo e Fuzzy K-Médias Aplicados na Delimitação de Unidades de Mapeamento de Solos em Topossequências

RESUMO O conhecimento dos solos é cada vez mais importante para que o uso dele seja realizado corretamente na agropecuária, no crescimento urbano, na conservação dos recursos naturais, entre outros. Entretanto, verifica-se carência de profissionais qualificados para a caracterização e os mapeamentos pedológicos, particularmente em escalas de maior detalhamento. Essa carência, aliada aos avanços das ferramentas computacionais e do sensoriamento remoto, promoveu o surgimento do Mapeamento Digital de Solos (MDS), que busca auxiliar e agilizar as atividades de levantamento pedológico. Assim, este trabalho objetivou desenvolver uma metodologia de delimitaçao de unidades de solos em topossequências por meio do comportamento espectral dos solos no comprimento de onda do Visível-Infravermelho Próximo (Vis-NIR). A metodologia espectral consistiu na obtenção das curvas espectrais dos solos por meio do espectrorradiômetro FieldSpecPro e da redução do número de informações espectrais por meio da análise de Componentes Principais, seguida de agrupamento das amostras mediante método fuzzy k-médias. Foram selecionadas cinco topossequências com pontos equidistantes de 30 m para caracterizar as classes de solos e amostragens. Foram descritas oito classes de solos distintas, que tiveram caracterização detalhada e classificação em perfis pedológicos. No restante dos pontos, a caracterização das classes de solos foi feita com base na classificação dos solos realizada nos perfis pedológicos, com coleta de amostras por meio de tradagens nas profundidades de 0,00-0,20 e 0,80-1,00 m, perfazendo o total de 162 amostras ao longo das cinco topossequências. As amostras foram analisadas pelas metodologias convencional e espectral, para que os resultados pudessem ser comparados e avaliados. Dessa forma, foram realizadas análises morfológicas, físicas (textura) e químicas nas amostras de solo. Das cinco topossequências estudadas, os resultados foram satisfatoriamente semelhantes; alguns solos não foram perfeitamente individualizados pela metodologia espectral, em razão da grande semelhança em seus comportamentos espectrais, como demonstrado pelo Latossolo Vermelho Férrico e Nitossolo Vermelho Férrico. A metodologia espectral foi capaz de diferenciar solos com resposta espectral distinta e estabelecer limites nas topossequências, apresentando grande potencial para ser implementada em levantamentos pedológicos.

Identification of different heart tissues from MRI C-SENC images using an unsupervised multi-stage fuzzy clustering technique.

PURPOSE: To objectively characterize different heart tissues from functional and viability images provided by composite-strain-encoding (C-SENC) MRI. MATERIALS AND METHODS: C-SENC is a new MRI technique for simultaneously acquiring cardiac functional and viability images. In this work, an unsupervised multi-stage fuzzy clustering method is proposed to identify different heart tissues in the C-SENC images. The method is based on sequential application of the fuzzy c-means (FCM) and iterative self-organizing data (ISODATA) clustering algorithms. The proposed method is tested on simulated heart images and on images from nine patients with and without myocardial infarction (MI). The resulting clustered images are compared with MRI delayed-enhancement (DE) viability images for determining MI. Also, Bland-Altman analysis is conducted between the two methods. RESULTS: Normal myocardium, infarcted myocardium, and blood are correctly identified using the proposed method. The clustered images correctly identified 90 +/- 4% of the pixels defined as infarct in the DE images. In addition, 89 +/- 5% of the pixels defined as infarct in the clustered images were also defined as infarct in DE images. The Bland-Altman results show no bias between the two methods in identifying MI. CONCLUSION: The proposed technique allows for objectively identifying divergent heart tissues, which would be potentially important for clinical decision-making in patients with MI.