Cartels – What are they and how to avoid being part of one : the implications of University fee deregulation

Universities supply a range of services to students. These include most obviously, tuition services in relation to undergraduate and postgraduate courses; research supervision services in relation to research degrees; as well as consultancy services in relation to Government and industry work. For the purposes of the CCA, universities are trading corporations. They engage in trade or commerce through the provision of a range of services for reward. As such Universities are subject to the same rules and regulations that govern the conduct of other trading corporations, such Coles and Woolworths. As senior officers and managers of a trading corporation you need to acquire some basic understanding of the rules that govern competition in the education sector. In other sectors, companies generally undertake a risk assessment of those areas where they are most at risk of contravening the CCA; to ascertain in advance how problems might arise so that they can put in place strategies to mitigate the risk of inadvertent contraventions.

Design and experimental testing of air slab caps which convert commercial electron diodes into dual purpose, correction-free diodes for small field dosimetry

Purpose Two diodes which do not require correction factors for small field relative output measurements are designed and validated using experimental methodology. This was achieved by adding an air layer above the active volume of the diode detectors, which canceled out the increase in response of the diodes in small fields relative to standard field sizes. Methods Due to the increased density of silicon and other components within a diode, additional electrons are created. In very small fields, a very small air gap acts as an effective filter of electrons with a high angle of incidence. The aim was to design a diode that balanced these perturbations to give a response similar to a water-only geometry. Three thicknesses of air were placed at the proximal end of a PTW 60017 electron diode (PTWe) using an adjustable “air cap”. A set of output ratios (ORfclin Det ) for square field sizes of side length down to 5 mm was measured using each air thickness and compared to ORfclin Det measured using an IBA stereotactic field diode (SFD). k fclin, f msr Qclin,Qmsr was transferred from the SFD to the PTWe diode and plotted as a function of air gap thickness for each field size. This enabled the optimal air gap thickness to be obtained by observing which thickness of air was required such that k fclin, f msr Qclin,Qmsr was equal to 1.00 at all field sizes. A similar procedure was used to find the optimal air thickness required to make a modified Sun Nuclear EDGE detector (EDGEe) which s “correction-free” in small field relative dosimetry. In addition, the feasibility of experimentally transferring k fclin, f msr Qclin,Qmsr values from the SFD to unknown diodes was tested by comparing the experimentally transferred k fclin, f msr Qclin,Qmsr values for unmodified PTWe and EDGEe diodes to Monte Carlo simulated values. Results 1.0 mm of air was required to make the PTWe diode correction-free. This modified diode (PTWeair) produced output factors equivalent to those in water at all field sizes (5–50 mm). The optimal air thickness required for the EDGEe diode was found to be 0.6 mm. The modified diode (EDGEeair) produced output factors equivalent to those in water, except at field sizes of 8 and 10 mm where it measured approximately 2% greater than the relative dose to water. The experimentally calculated k fclin, f msr Qclin,Qmsr for both the PTWe and the EDGEe diodes (without air) matched Monte Carlo simulated results, thus proving that it is feasible to transfer k fclin, f msr Qclin,Qmsr from one commercially available detector to another using experimental methods and the recommended experimental setup. Conclusions It is possible to create a diode which does not require corrections for small field output factor measurements. This has been performed and verified experimentally. The ability of a detector to be “correction-free” depends strongly on its design and composition. A nonwater-equivalent detector can only be “correction-free” if competing perturbations of the beam cancel out at all field sizes. This should not be confused with true water equivalency of a detector.

One-step homogeneous C-reactive protein assay for saliva

Background: Cardiovascular disease is the leading cause of death in the world. Human C-reactive protein (CRP) has been used in the risk assessment of coronary events. Human saliva mirrors the body's health and well-being and is non-invasive, easy to collect and ideal for third world countries as well as for large patient screening. The aim was to establish a saliva CRP reference range and to demonstrate the clinical utility of salivary CRP levels in assessing the coronary events in a primary health care setting. Methods: We have used a homogeneous bead based assay to detect CRP levels in human saliva. We have developed a rapid 15 min (vs 90 min), sequential, one-step assay to detect CRP in saliva. Saliva was collected from healthy volunteers (n = 55, ages 20-70 years) as well as from cardiac patients (n = 28, ages 43-86 years). Results: The assay incubation time was optimised from 90 min to 15 mm and generated a positive correlation (n = 29, range 10-2189 pg/mL, r2 = 0.94; Passing Bablok slope 0.885. Intercept 0, p>0.10), meaning we could decrease the incubation time and produce equivalent results with confidence. The mean CRP level in the saliva of healthy human volunteers was 285 pg/mL and in cardiac patients was 1680 pg/mL (p<0.01). Analysis of CRP concentrations in paired serum and saliva samples from cardiac patients gave a positive correlation (r2 = 0.84, p<0.001) and the salivary CRP concentration capable of distinguishing healthy from diseased patients. Conclusions: The results suggest that this minimally invasive, rapid and sensitive assay will be useful in large patient screening studies for risk assessment of coronary events. (C) 2011 Elsevier B.V. All rights reserved.

Evaluation of the Australian Performing Arts Market 2014-2018 - Year One Report

The Australia Council awarded the tender of APAMs 2014, 2016 and 2018 to the Brisbane Powerhouse. The Australia Council, in awarding the contract for the presentation of APAM by Brisbane Powerhouse, stipulated that a formal evaluation of the three iterations of APAM and activity in the intervening years be undertaken. Queensland University of Technology, Creative Industries Faculty, under the leadership of Associate Professor Sandra Gattenhof, were contracted to undertake the formal evaluation. This is the first year report on the Brisbane iteration of the Market. This report has drawn from data collected across a range of sources, drawing on the scoping study undertaken by Justin Macdonnell addressing the Market from 1994–2010; the tender document submitted by the Brisbane Powerhouse; in-person interviews with APAM staff, APAM Stakeholders, Vox Pops from delegates in response to individual sessions, producer company/artist case studies and, most significantly, responses from a detailed online survey sent to all delegates. The main body of the report is organised around three key research aims, as outlined in the Brisbane Powerhouse Tender document (2011). These have been articulated as: Evaluation of international market development outcomes through showcasing work to targeted international presenters and agents Evaluation of national market development outcomes through showcasing work to national presenters and producers Evaluation of the exchange ideas, dialogue, skill 
development, partnerships, collaborations and co- productions and networks with local and international peers. The culmination of the data analysis has been articulated through five key recommendations, which may assist the APAM delivery team for the next version, in 2016. In summary, the recommendations are described as: 1. Indigenous focus to remain central to the conception and delivery of APAM 2. Re-framing APAM’s function and its delivery 3. Logistics and communications in a multi-venue approach, including communications and housekeeping, volunteers, catering, re-calibrating the employment of Brisbane Powerhouse protocols and processes for APAM 4. Presentation and promotion for presenters 5. Strategic targeting of Asian producers.

Toowoomba torrent no one knew was coming

"It came without warning and, within minutes, the sea of murky brown water that swept through the main street of Toowoomba was gone."

One year on and flood victims pick up the pieces

"For many Australians, January 10 last year is just a media memory — a vision of cars surfing down inner-city creeks in Toowoomba CBD and houses floating across farm paddocks in the Lockyer Valley. But for the people of the Lockyer Valley who were clinging to life, the terrifying visions of that day remain every time they close their eyes."

Awards before and after the Nobel Prize : a Matthew effect and/or a ticket to one's own funeral?

The primary aim of this descriptive exploration of scientists’ life cycle award patterns is to evaluate whether awards breed further awards and identify researcher experiences after reception of the Nobel Prize. To achieve this goal, we collected data on the number of awards received each year for 50 years before and after Nobel Prize reception by all 1901–2000 Nobel laureates in physics, chemistry, and medicine or physiology. Our results indicate an increasing rate of awards before Nobel reception, reaching the summit precisely in the year of the Nobel Prize. After this pinnacle year, awards drop sharply. This result is confirmed by separate analyses of three different disciplines and by a random-effects negative binomial regression model. Such an effect, however, does not emerge for more recent Nobel laureates (1971–2000). In addition, Nobelists in medicine or physiology generate more awards shortly before and after prize reception, whereas laureates in chemistry attract more awards as time progresses.

Prevalence of malnutrition, obesity and nutritional risk of Australian paediatric inpatients: A national one-day snapshot

Aim Low prevalence rates of malnutrition at 2.5% to 4% have previously been reported in two tertiary paediatric Australian hospitals. The current study is the first to measure the prevalence of malnutrition, obesity and nutritional risk of paediatric inpatients in multiple hospitals throughout Australia. Methods Malnutrition, obesity and nutritional risk prevalence were investigated in 832 and 570 paediatric inpatients, respectively, in eight tertiary paediatric hospitals and eight regional hospitals across Australia on a single day. Malnutrition and obesity prevalence was determined using z-scores and body mass index (BMI) percentiles. High nutritional risk was determined as a Paediatric Yorkhill Malnutrition Score of 2 or more. Results The prevalence rates of malnourished, wasted, stunted, overweight and obese paediatric patients were 15%, 13.8%, 11.9%, 8.8% and 9.9%, respectively. Patients who identified as Aboriginal and Torres Strait Islander were more likely to have lower height-for-age z-scores (P < 0.01); however, BMI and weight-for-age z-scores were not significantly different. Children who were younger, from regional hospitals or with a primary diagnosis of cardiac disease or cystic fibrosis had significantly lower anthropometric z-scores (P = 0.05). Forty-four per cent of patients were identified as at high nutritional risk and requiring further nutritional assessment. Conclusions The prevalence of malnutrition and nutritional risk of Australian paediatric inpatients on a given day was much higher when compared with the healthy population. In contrast, the proportion of overweight and obese patients was less.

One and the same: Integrative taxonomic evidence that Bactrocera invadens (Diptera: Tephritidae) is the same species as the Oriental fruit fly Bactrocera dorsalis

The invasive fruit fly Bactrocera invadens Drew, Tsuruta & White, and the Oriental fruit fly Bactrocera dorsalis (Hendel) are highly destructive horticultural pests of global significance. Bactrocera invadens originates from the Indian subcontinent and has recently invaded all of sub-Saharan Africa, while B. dorsalis principally occurs from the Indian subcontinent towards southern China and South-east Asia. High morphological and genetic similarity has cast doubt over whether B. invadens is a distinct species from B. dorsalis. Addressing this issue within an integrative taxonomic framework, we sampled from across the geographic distribution of both taxa and: (i) analysed morphological variation, including those characters considered diagnostic (scutum colour, length of aedeagus, width of postsutural lateral vittae, wing size, and wing shape); (ii) sequenced four loci (ITS1, ITS2, cox1 and nad4) for phylogenetic inference, and; (iii) generated a cox1 haplotype network to examine population structure. Molecular analyses included the closely related species, Bactrocera kandiensis Drew & Hancock. Scutum colour varies from red-brown to fully black for individuals from Africa and the Indian subcontinent. All individuals east of the Indian subcontinent are black except for a few red-brown individuals from China. The postsutural lateral vittae width of B. invadens is narrower than B. dorsalis from eastern Asia, but the variation is clinal, with subcontinent B. dorsalis populations intermediate in size. Aedeagus length, wing shape and wing size cannot discriminate between the two taxa. Phylogenetic analyses failed to resolve B. invadens from B. dorsalis, but did resolve B. kandiensis. Bactrocera dorsalis and B. invadens shared cox1 haplotypes, yet the haplotype network pattern does not reflect current taxonomy or patterns in thoracic colour. Some individuals of B. dorsalis/B. invadens possessed haplotypes more closely related to B. kandiensis than to conspecifics, suggestive of mitochondrial introgression between these species. The combined evidence fails to support the delimitation of B. dorsalis and B. invadens as separate biological species. Consequently, existing biological data for B. dorsalis may be applied to the invasive population in Africa. Our recommendation, in line with other recent publications, is that B. invadens be synonymized with B. dorsalis.

Canards in advection-reaction-diffusion systems in one spatial dimension

This thesis contains a mathematical investigation of the existence of travelling wave solutions to singularly perturbed advection-reaction-diffusion models of biological processes. An enhanced mathematical understanding of these solutions and models is gained via the identification of canards (special solutions of fast/slow dynamical systems) and their role in the existence of the most biologically relevant, shock-like solutions. The analysis focuses on two existing models. A new proof of existence of a whole family of travelling waves is provided for a model describing malignant tumour invasion, while new solutions are identified for a model describing wound healing angiogenesis.

Selection procedures for module discovery : exploring evolutionary algorithms for cognitive science

Evolutionary algorithms are playing an increasingly important role as search methods in cognitive science domains. In this study, methodological issues in the use of evolutionary algorithms were investigated via simulations in which procedures were systematically varied to modify the selection pressures on populations of evolving agents. Traditional roulette wheel, tournament, and variations of these selection algorithms were compared on the “needle-in-a-haystack” problem developed by Hinton and Nowlan in their 1987 study of the Baldwin effect. The task is an important one for cognitive science, as it demonstrates the power of learning as a local search technique in smoothing a fitness landscape that lacks gradient information. One aspect that has continued to foster interest in the problem is the observation of residual learning ability in simulated populations even after long periods of time. Effective evolutionary algorithms balance their search effort between broad exploration of the search space and in-depth exploitation of promising solutions already found. Issues discussed include the differential effects of rank and proportional selection, the tradeoff between migration of populations towards good solutions and maintenance of diversity, and the development of measures that illustrate how each selection algorithm affects the search process over generations. We show that both roulette wheel and tournament algorithms can be modified to appropriately balance search between exploration and exploitation, and effectively eliminate residual learning in this problem.

A stakeholder analysis of one institution’s assuring learning experience – is the promise and the practice worth the price?

Universities around the world are rushing to implement assurance of learning policies and practices with varying degrees of success. One School investigated its own policy and practice development through the eyes of its key stakeholders to identify whether the practice was worth the price. Findings indicate that although the key stakeholders considered different needs and viewed their experiences differently, value did abound and was in the eye of the beholder.

XD: Experience Design Magazine (Issue One)

XD: Experience Design Magazine is an interdisciplinary publication that focuses on the concept and practice of ‘experience design’, as a holistic concept separate from the well known concept of ‘user experience’. The magazine aims to present a mixture of interrelated perspectives from industry and academic researchers with practicing designers and managers. The informal, journalistic style of the publication aims to simultaneously provide a platform for researchers and other writers to promote their work in an applied way for global impact, and for industry designers to present practical perspectives to inspire a global research audience. Each issue will feature a series of projects, interviews, visuals, reviews and creative inspiration – all of which help everyone understand why experience design is important, who does it and where, how experience design is done in practice and how experience design research can enhance practice. Contents Issue 1 Miller, F. Developing Principles for Designing Optimal Experiences Lavallee, P. Design for Emotions Khan, H. The Entropii XD Framework Bowe, M. & Silvers, A. First Steps in Experience Design Leaper, N. Learning by Design Forrest, R. & Roberts, T. Interpretive Design: Think, Do, Feel Tavakkoli, P. Working Hard at Play Stow, C. Designing Engaging Learning Experiences Wood, M. Enhance Your Travel Experience Using Apps Miller, F. Humanizing It Wood, M. Designing the White Night Experience Newberry, P. & Farnham, K. Experience Design Book Excerpt

Do-Rank: DCG optimization for learning-to-rank in tag-based item recommendation systems

Discounted Cumulative Gain (DCG) is a well-known ranking evaluation measure for models built with multiple relevance graded data. By handling tagging data used in recommendation systems as an ordinal relevance set of {negative,null,positive}, we propose to build a DCG based recommendation model. We present an efficient and novel learning-to-rank method by optimizing DCG for a recommendation model using the tagging data interpretation scheme. Evaluating the proposed method on real-world datasets, we demonstrate that the method is scalable and outperforms the benchmarking methods by generating a quality top-N item recommendation list.

Working as one: A road map to disaster resilience for Australia

Natural disasters cause widespread disruption, costing the Australian economy $6.3 billion per year, and those costs are projected to rise incrementally to $23 billion by 2050. With more frequent natural disasters with greater consequences, Australian communities need the ability to prepare and plan for them, absorb and recover from them, and adapt more successfully to their effects. Enhancing Australian resilience will allow us to better anticipate disasters and assist in planning to reduce losses, rather than just waiting for the next king hit and paying for it afterwards. Given the scale of devastation, governments have been quick to pick up the pieces when major natural disasters hit. But this approach (‘The government will give you taxpayers’ money regardless of what you did to help yourself, and we’ll help you rebuild in the same risky area.’) has created a culture of dependence. This is unsustainable and costly. In 2008, ASPI published Taking a punch: building a more resilient Australia. That report emphasised the importance of strong leadership and coordination in disaster resilience policymaking, as well as the value of volunteers and family and individual preparation, in managing the effects of major disasters. This report offers a roadmap for enhancing Australia’s disaster resilience, building on the 2011 National Strategy for Disaster Resilience. It includes a snapshot of relevant issues and current resilience efforts in Australia, outlining key challenges and opportunities. The report sets out 11 recommendations to help guide Australia towards increasing national resilience, from individuals and local communities through to state and federal agencies.