Growth and acidification performance of probiotics in pure culture and co-culture with Streptococcus thermophilus: The effect of inulin

Inulin was used as a prebiotic to improve the quality and consistency of skim milk fermented by co-cultures and pure Cultures of Lactobacillus acidophilus, Lactobacillus rhamnosus, Lactobacillus bulgaricus and Bifidobacterium lactis with Streptococcus thermophilus. We compared, either in the presence or absence of 4 g inulin/100 g, the results of the main kinetic parameters, specifically the generation time (t(g)), the maximum acidification rate (V(max)). and the times to reach V(max) (t(max)), to attain pH 5.0 (t(pH5.0)) and to complete the fermentation (t(pH4.5)). Post-acidification, lactic acid formation and cell counts were also determined and compared, either 1 day after the fermentation was complete or after 7 day storage at 4 degrees C. In general, inulin addition to the milk increased in co-cultures V(max), decreased t(max), t(g) and t(pH4.5), favored post-acidification, exerted a bifidogenic effect, and preserved almost intact cell viability during storage. In addition, S. thermophilus was shown to stimulate the metabolism of the other lactic bacteria. Contrary to co-cultures, most of the effects in pure Cultures were not statistically significant. The most important aspect of this paper is the use of the generation time as a toot to investigate the microbial response to inulin addition. (c) 2009 Elsevier Ltd. All rights reserved.

Computing the phase diagram of binary mixtures: A patchy particle case study

We investigate the phase behaviour of 2D mixtures of bi-functional and three-functional patchy particles and 3D mixtures of bi-functional and tetra-functional patchy particles by means of Monte Carlo simulations and Wertheim theory. We start by computing the critical points of the pure systems and then we investigate how the critical parameters change upon lowering the temperature. We extend the successive umbrella sampling method to mixtures to make it possible to extract information about the phase behaviour of the system at a fixed temperature for the whole range of densities and compositions of interest. (C) 2013 AIP Publishing LLC.

Developing and validating a measure of the strength of the HRM system: Operationalizing the construct and relationships among its dimensions

The four studies in this article introduce a questionnaire to measure Strength of the HRM System (HRMSQ), a multidimensional construct, theoretically developed by Bowen and Ostroff (2004). Strength of the HRM System is a set of process characteristics that lead to effectiveness in conveying signals to employees that allow them to create a shared meaning of desired and appropriate work behaviours. Nine characteristics are suggested, grouped in three features: Distinctiveness, Consistency and Consensus. Study 1 developed and tested a questionnaire in a sample of workers from five different sectors. Study 2 cross-validated the measure in a sample of civil servants in a municipality. These two studies used performance appraisal as the reference HRM practice and led to a short version of the HRMSQ. Study 3 and Study 4 extend the HRMSQ to several common HRM practices. The HRMSQ is tested in two samples, of call center and several private and public organizations‟ workers (study 3). In study 4 the questionnaire is refined and tested with a sample from a hotel chain and finally cross-validated with two other samples, in the insurance and batteries sectors, leading to a longer version of the HRMSQ. Content analysis of several interviews with human resource managers and the Rasch model (1960, 1961, 1980), were used to define and select the indicators of the questionnaire. Convergent, discriminant and predictive validity of the measure are tested. The results of the four studies highlight the complexity of the relationships between the proposed characteristics and support the validity of a parsimonious measure of Strength of the HRM System.

Tradução e validação para Portugal do Patient Activation Measure 13 : em pessoas com Diabetes Mellitus tipo 2

RESUMO - Introdução: A Diabetes Mellitus Tipo 2 (DM2) tem uma elevada prevalência em todo o mundo, com impacto significativo a nível de Saúde Pública, na vida dos doentes e nos custos que lhe são associados. O Patiente Activation Measure 13 (PAM13) é um questionário que possibilita a avaliação das crenças, conhecimentos, motivação e capacidades de uma pessoa em relação à sua saúde; pelo que a sua utilização na DM2 é pertinente. Objetivos: Traduzir o PAM 13, versão curta, para Português de Portugal; Estabelecer as propriedades psicométricas da versão Portuguesa do PAM 13 (PAM13-P); Validar a PAM 13-P num grupo de pessoas com DM2. Material e métodos: O processo de tradução e adaptação cultural do questionário foi composto pelas fases: 1-Tradução, 2-Reconciliação e síntese, 3-Back translation, 4-Rever e sintetizar a Back translation, 5-Harmonização, 6-Revisão do comité de peritos, 7-Cognitive debriefing e 8-Avaliação final. Para validar o PAM13-P realizou-se um estudo observacional transversal analítico com uma amostra de conveniência, de pessoas com DM2, seguidas na Associação Protectora dos Diabéticos de Portugal. O questionário foi de autopreenchimento e foi consultado o processo clínico para obtenção da HbA1c. O tratamento estatístico foi realizado através do SPSS 21® e Winsteps v3.8.1®. Resultados e discussão: O processo de tradução e adaptação cultural foi realizado de acordo com as guidelines. Foram realizados 3 painéis de e-Delphi, com 21 participantes de áreas distintas, tendo-se obtido bons níveis de concordância. As principais modificações realizadas ao questionário foram a simplificação da linguagem e dos itens, obtendo-se as equivalências necessárias. O PAM13-P foi aplicado a 201 pessoas, sendo que a taxa de resposta foi de 83%. Na amostra analisada 57.3% eram homens. Obtiveram-se as médias de idade 67.1 anos e de duração de diabetes 17.3 anos. A média do score do PAM foi 58.5±10.1(41.8-90.5) pontos e 49,7% da amostra estava no nível 3 de ativação. Relativamente aos itens verificou-se que os itens mais difíceis foram o 13(56.1) e o 8(55.4) e o com menor dificuldade foi 4(38.5). As categorias de resposta tiveram um bom ajuste ao Modelo de Rasch. O ajustamento dos itens foi infit entre 0.779-1.177 e outfit entre 0.794-1.315. A fiabilidade dos indivíduos variou entre 0.77(real) e 0.83(modelo) e dos itens foi de 0.97 (real e modelo). O Alfa de Cronbach foi bom (α=0.82). Estas estatísticas foram semelhantes aos da validação do PAM13. Existiu uma relação entre o score do PAM e os itens de validação em 51%. Das variáveis analisadas, existia um relação do nível de ativação com a idade e com a HbA1c. Conclusões: O PAM13-P foi traduzido e adaptado culturalmente para Português e foi validado em pessoas com DM2, sendo as propriedades psicométricas boas.

On the impact of overlapping access points in detecting node encounters

Data traces, consisting of logs about the use of mobile and wireless networks, have been used to study the statistics of encounters between mobile nodes, in an attempt to predict the performance of opportunistic networks. Understanding the role and potential of mobile devices as relaying nodes in message dissemination and delivery depends on the knowledge about patterns and number of encounters among nodes. Data traces about the use of WiFi networks are widely available and can be used to extract large datasets of encounters between nodes. However, these logs only capture indirect encounters between nodes, and the resulting encounters datasets might not realistically represent the spatial and temporal behaviour of nodes. This paper addresses the impact of overlapping between the coverage areas of different Access Points of WiFi networks in extracting encounters datasets from the usage logs. Simulation and real-world experimental results show that indirect encounter traces extracted directly from these logs strongly underestimate the opportunities for direct node-to- node message exchange in opportunistic networks.

Characterisation of neutron spectra in mixed high energy fields in lineal accelerators: response functions validation

Actualment, la resposta de la majoria d’instrumentació operacional i dels dosímetres personals utilitzats en radioprotecció per a la dosimetria neutrònica és altament dependent de l’energia dels espectres neutrònics a analitzar, especialment amb camps neutrònics amb una important component intermitja. En conseqüència, la interpretació de les lectures d’aquests aparells es complicada si no es té un coneixement previ de la distribució espectral de la fluència neutrònica en els punts d’interès. El Grup de Física de les Radiacions de la Universitat Autònoma de Barcelona (GFR-UAB) ha desenvolupat en els últims anys un espectròmetre de neutrons basat en un Sistema d’Esferes Bonner (BSS) amb un contador proporcional d’3He com a detector actiu. Els principals avantatges dels espectròmetres de neutrons per BSS són: la seva resposta isotròpica, la possibilitat de discriminar la component neutrònica de la gamma en camps mixtos, i la seva alta sensibilitat neutrònica als nivells de dosi analitzats. Amb aquestes característiques, els espectròmetres neutrònics per BSS compleixen amb els estándards de les últimes recomanacions de la ICRP i poden ser utilitzats també en el camp de la dosimetria neutrònica per a la mesura de dosis en el rang d’energia que va dels tèrmics fins als 20 MeV, en nou ordres de magnitud. En el marc de la col•laboració entre el GFR - UAB i el Laboratorio Nazionale di Frascati – Istituto Nazionale di Fisica Nucleare (LNF-INFN), ha tingut lloc una experiència comparativa d’espectrometria per BSS amb els feixos quasi monoenergètics de 2.5 MeV i 14 MeV del Fast Neutron Generator de l’ENEA. En l’exercici s’ha determinat l’espectre neutrònic a diferents distàncies del blanc de l’accelerador, aprofitant el codi FRUIT recentment desenvolupat pel grup LNF. Els resultats obtinguts mostren una bona coherència entre els dos espectròmetres i les dades mesurades i simulades.

The Cultural Olympiad of Barcelona in 1992: Good points and bad points. Lessons for the Future

This text was presented at the Symposium “Olympic Arts and Culture Festivals: Recent Experiences and Future Design”, held in Chicago on the 23-24 June 2008. It provides with an analysis of good and bad points of the Cultural Olympiad of Barcelona’92 in order to discover, from that past experience, any lessons for future Cultural Olympiads and Olympic Movement cultural policy in general, as well as to rethink, in a critical way, Catalan cultural policies.

Implementation of a robust coded structured light technique for dynamic 3D measurements

This paper presents the implementation details of a coded structured light system for rapid shape acquisition of unknown surfaces. Such techniques are based on the projection of patterns onto a measuring surface and grabbing images of every projection with a camera. Analyzing the pattern deformations that appear in the images, 3D information of the surface can be calculated. The implemented technique projects a unique pattern so that it can be used to measure moving surfaces. The structure of the pattern is a grid where the color of the slits are selected using a De Bruijn sequence. Moreover, since both axis of the pattern are coded, the cross points of the grid have two codewords (which permits to reconstruct them very precisely), while pixels belonging to horizontal and vertical slits have also a codeword. Different sets of colors are used for horizontal and vertical slits, so the resulting pattern is invariant to rotation. Therefore, the alignment constraint between camera and projector considered by a lot of authors is not necessary

Precision of a new tool to measure visceral adipose tissue (VAT) using dual-energy X-Ray absorptiometry (DXA).

OBJECTIVE: A new tool to quantify visceral adipose tissue (VAT) over the android region of a total body dual-energy x-ray absorptiometry (DXA) scan has recently been reported. The measurement, CoreScan, is currently available on Lunar iDXA densitometers. The purpose of the study was to determine the precision of the CoreScan VAT measurement, which is critical for understanding the utility of this measure in longitudinal trials. DESIGN AND METHODS: VAT precision was characterized in both an anthropomorphic imaging phantom (measured on 10 Lunar iDXA systems) and a clinical population consisting of obese women (n = 32). RESULTS: The intrascanner precision for the VAT phantom across 9 quantities of VAT mass (0-1,800 g) ranged from 28.4 to 38.0 g. The interscanner precision ranged from 24.7 to 38.4 g. There was no statistical dependence on the quantity of VAT for either the inter- or intrascanner precision result (p = 0.670). Combining inter- and intrascanner precision yielded a total phantom precision estimate of 47.6 g for VAT mass, which corresponds to a 4.8% coefficient of variance (CV) for a 1 kg VAT mass. Our clinical population, who completed replicate total body scans with repositioning between scans, showed a precision of 56.8 g on an average VAT mass of 1110.4 g. This corresponds to a 5.1% CV. Hence, the in vivo precision result was similar to the phantom precision result. CONCLUSIONS: The study suggests that CoreScan has a relatively low precision error in both phantoms and obese women and therefore may be a useful addition to clinical trials where interventions are targeted towards changes in visceral adiposity.

Development of the Crohn's disease digestive damage score, the Lémann score.

Crohn's disease (CD) is a chronic progressive destructive disease. Currently available instruments measure disease activity at a specific point in time. An instrument to measure cumulative structural damage to the bowel, which may predict long-term disability, is needed. The aim of this article is to outline the methods to develop an instrument that can measure cumulative bowel damage. The project is being conducted by the International Program to develop New Indexes in Crohn's disease (IPNIC) group. This instrument, called the Crohn's Disease Digestive Damage Score (the Lémann score), should take into account damage location, severity, extent, progression, and reversibility, as measured by diagnostic imaging modalities and the history of surgical resection. It should not be "diagnostic modality driven": for each lesion and location, a modality appropriate for the anatomic site (for example: computed tomography or magnetic resonance imaging enterography, and colonoscopy) will be used. A total of 24 centers from 15 countries will be involved in a cross-sectional study, which will include up to 240 patients with stratification according to disease location and duration. At least 120 additional patients will be included in the study to validate the score. The Lémann score is expected to be able to portray a patient's disease course on a double-axis graph, with time as the x-axis, bowel damage severity as the y-axis, and the slope of the line connecting data points as a measure of disease progression. This instrument could be used to assess the effect of various medical therapies on the progression of bowel damage. (Inflamm Bowel Dis 2011).

Robustness of entanglement

In the quest to completely describe entanglement in the general case of a finite number of parties sharing a physical system of finite-dimensional Hilbert space an entanglement magnitude is introduced for its pure and mixed states: robustness. It corresponds to the minimal amount of mixing with locally prepared states which washes out all entanglement. It quantifies in a sense the endurance of entanglement against noise and jamming. Its properties are studied comprehensively. Analytical expressions for the robustness are given for pure states of two-party systems, and analytical bounds for mixed states of two-party systems. Specific results are obtained mainly for the qubit-qubit system (qubit denotes quantum bit). As by-products local pseudomixtures are generalized, a lower bound for the relative volume of separable states is deduced, and arguments for considering convexity a necessary condition of any entanglement measure are put forward.

Quantifying the level of eusociality

The evolution of animal societies in which some individuals forego direct reproduction to help others to reproduce poses an evolutionary paradox. Societies where all individuals reproduce equally and societies where a single individual completely monopolizes reproduction represent the end points of a continuum of variance in the reproductive output among group members. This led Sherman et al. (1995) to propose that cooperative breeding and eusociality (a term originally applied only to insects) are not discrete phenomena. Rather they form a continuum whose main difference is the extent to which individuals forego their own reproductive opportunity to help other members of the group. Here we present a new index: the eusociality index. It quantifies the decrease in direct reproduction of group members as a resut of altruistic acts directed to other members of the group (i.e. a measure of the level of eusociality). The rationale for this index lies in the fundamental duality of the reproductive process, in which organisms supply two distinct elements: (i) genetic material (genes); and (ii) power (energy). In non-eusocial animals, all individuals transmit genes and power in the same ratio (notwithstanding individual variance in offspring size and parental investment). By contrast, amongst eusocial animals some individuals contribute proportionally more to gene transfer, and others more to energy, resulting in high interindividual variation in the ratio of gene to power transfer.

Influence of intrauterine and extrauterine growth on neurodevelopmental outcome of monozygotic twins

There have been indications that intrauterine and early extrauterine growth can influence childhood mental and motor function. The objective of the present study was to evaluate the influence of intrauterine growth restriction and early extrauterine head growth on the neurodevelopmental outcome of monozygotic twins. Thirty-six monozygous twin pairs were evaluated at the corrected age of 12 to 42 months. Intrauterine growth restriction was quantified using the fetal growth ratio. The effects of birth weight ratio, head circumference at birth and current head circumference on mental and motor outcomes were estimated using mixed-effect linear regression models. Separate estimates of the between (interpair) and within (intrapair) effects of each measure on development were thus obtained. Neurodevelopment was assessed with the Bayley Scales of Infant Development, 2nd edition, by a psychologist blind to the exposure. A standardized neurological examination was performed by a neuropediatrician who was unaware of the exposures under investigation. After adjustment, birth weight ratio and head circumference at birth were not associated with motor or mental outcomes. Current head circumference was associated with mental but not with motor outcomes. Only the intrapair twin effect was significant. An increase of 1 cm in current head circumference of one twin compared with the other was associated with 3.2 points higher in Mental Developmental Index (95%CI = 1.06-5.32; P < 0.03). Thus, no effect of intrauterine growth was found on cognition and only postnatal head growth was associated with cognition. This effect was not shared by the co-twin.

Pain pressure threshold algometry of the abdominal wall in healthy women

The objective of this study was to determine the inter- and intra-examiner reliability of pain pressure threshold algometry at various points of the abdominal wall of healthy women. Twenty-one healthy women in menacme with a mean age of 28 ± 5.4 years (range: 19-39 years) were included. All volunteers had regular menstrual cycles (27-33 days) and were right-handed and, to the best of our knowledge, none were taking medications at the time of testing. Women with a diagnosis of depression, anxiety or other mood disturbances were excluded. Women with previous abdominal surgery, any pain condition or any evidence of inflammation, hypertension, smoking, alcoholism, or inflammatory disease were also excluded. Pain perception thresholds were assessed with a pressure algometer with digital traction and compression and a measuring capacity for 5 kg. All points were localized by palpation and marked with a felt-tipped pen and each individual was evaluated over a period of 2 days in two consecutive sessions, each session consisting of a set of 14 point measurements repeated twice by two examiners in random sequence. There was no statistically significant difference in the mean pain threshold obtained by the two examiners on 2 diferent days (examiner A: P = 1.00; examiner B: P = 0.75; Wilcoxon matched pairs test). There was excellent/good agreement between examiners for all days and all points. Our results have established baseline values to which future researchers will be able to refer. They show that pressure algometry is a reliable measure for pain perception in the abdominal wall of healthy women.

Measuring Effectiveness of Marketing Message: The Role of Verbal, Visual and Brand Elements

The aim of this paper is to study the role of verbal, visual and brand elements while meas-uring effectiveness of marketing message. The thesis is written in the context of mobile gaming industry. The object of the study is marketing message. To achieve the aim, the main research question was formulated: How do the elements of marketing message, such as verbal, visual and brand, affect the consumer’s attitude toward the ad, emotional response and attention capture? The theory development chapter lays on three corner stones – analysis of previous litera-ture on marketing message and its elements, namely verbal, visual and brand; overview of literature on attitude formation and particularly attitude toward the ad. In addition, investiga-tion of key points of emotional response and attention capture literature finalizes the chap-ter. The empirical part consists of experiment, conducted with 27 participants. Experiment includes the self-report semantically anchored scale, measuring the attitude toward the ad, as well as autonomic measures – eye tracking (attention capture) and facial expressions (emotional response). The results of the experiment showed that the size of the brand element – the logo – has an effect on the attention capture and the overall attitude toward the ad. The bigger the logo, the more time people spend viewing it, and they realise the message is more educa-tional and factual. The measure related to the visual element – the visual complexity – in-creases the intensity of participant’s facial expression. While the measure of verbal ele-ment – the contrast between text and background colours – leads to a better attitude to-ward the ad. The higher the contrast between text and background, the more known the message appears to the viewer.