Condition rating survey manual : state system condition rating survey (CRS).

The Illinois Department of Transportation (IDOT), through the Office of Planning and Programming (OPP), conducts a Condition Rating Survey (CRS) to assess pavement condition on its approximate 16,000 mile state highway system. The CRS is an important tool to assist the Department with its pavement management activities. A CRS value indicates the current condition of a pavement. CRS is a factor in highway program development, provides an opportunity to review the highway network, provides overall condition of the state highway system, gives input into the legislative/budgeting process and allows calculation of pavement needs.

Address on the power and value of the Sunday school system in evangelizing heathen and re-constructing Christian communitys, by an improvement of the religion and morals, the education and literature, and the social, civil and political institutions of every people : and on the Southern enterprise of the American Sunday school union ; delivered in the Lutheran Church, City of Charleston, on Monday evening, March 17, 1834 /

Author's presentation copy.

Observations on the vinous fermentation : with a description of a patent apparatus to improve the same : also a statement of the advantages to be derived from this system when applied to the process of brewing, as confirmed by the testimony of Messrs. Gray and Co., brewers, of Westham, in the county of Essex.

Goldsmiths'-Kress no. 23792.

Rail system investment analysis : description of the railroad investment process /

Mode of access: Internet.

Rose's notes on the United States Supreme court reports (2 Dallas to 259 United States reports) showing the present value as authority of all cases therein reported as disclosed by all subsequent citations since the revised edition in all the courts of last resort, both federal and state, and in the annotations in American law reports, lawyers' reports annotated, annotated cases, British ruling cases, negligence and compensation cases annotated with parallel references to the above-mentioned annotated cases, the lawyers' edition of the U. S. reports and the reporter system,

Mode of access: Internet.

Rose's notes on the United States Supreme court reports (2 Dallas to 241 United States reports) showing the present value as authority of all cases therein reported as disclosed by all subsequent citations in all the courts of last resort, both federal and state, and in the annotations in American decisions, American reports, American state reports, Annotated cases (American and English), Lawyers' reports annotated, English ruling cases, British ruling cases, Negligence and compensation cases annotated, with parallel references to the above-mentioned Annotated cases, the Lawyers' edition of the U. S. reports and the Reporter system,

Kept up to date by supplements

Tasmanian forestry. Timber products and sawmilling industry, a description of timber trees indigenous to Tasmania, their commercial value and process of manufacture,

"Regulations under 'The crown lands act, 1903' ": p.70-98.

Inter-organisational networks, value creation and the process of technology integration in research and development

Traditional methods of R&D management are no longer sufficient for embracing innovations and leveraging complex new technologies to fully integrated positions in established systems. This paper presents the view that the technology integration process is a result of fundamental interactions embedded in inter-organisational activities. Emerging industries, high technology companies and knowledge intensive organisations owe a large part of their viability to complex networks of inter-organisational interactions and relationships. R&D organisations are the gatekeepers in the technology integration process with their initial sanction and motivation to develop technologies providing the first point of entry. Networks rely on the activities of stakeholders to provide the foundations of collaborative R&D activities, business-to-business marketing and strategic alliances. Such complex inter-organisational interactions and relationships influence value creation and organisational goals as stakeholders seek to gain investment opportunities. A theoretical model is developed here that contributes to our understanding of technology integration (adoption) as a dynamic process, which is simultaneously structured and enacted through the activities of stakeholders and organisations in complex inter-organisational networks of sanction and integration.

Prospective case review of a global e-health system for doctors in developing countries

The Swinfen Charitable Trust has managed email consultations for doctors in developing countries since 1999. The process was handled manually for the first three years and then subsequently using an automatic message-handling system. We conducted a prospective review of email consultations between referring doctors and consulting specialists during six months of automatic operation (December 2003 to May 2004). During the study period 125 consultations took place. These concerned a wide range of specialties (e.g. orthopaedics 17%, dermatology 16%, obstetrics and gynaecology 11%, radiology 10%). Of these referrals, 33% (41) were for paediatric cases. Consulting specialists, who were based in five countries, were volunteers. Referring doctors were from 24 hospitals in 12 developing countries. The median time from referral to definitive reply was 1.5 days (interquartile range 0.6-4.9). There was an 85% response rate (n = 106) to a survey concerning the value of the consultation to the referring doctor. All the referring doctors who responded made positive comments about the service and half said that it improved their management of the case. The second-opinion consultation system operated by the Swinfen Charitable Trust represents an example of a global e-health system operated for altruistic, rather than commercial, reasons.

Process optimization of an aerobic upflow sludge blanket reactor system

Response of an aerobic upflow sludge blanket (AUSB) reactor system to the changes in operating conditions was investigated by varying two principle operating variables: the oxygenation pressure and the flow recirculation rate. The oxygenation pressure was varied between 0 and 25 psig (relative), while flow recirculation rates were between 1,300 and 600% correspondingly. The AUSB reactor system was able to handle a volumetric loading of as high as 3.8 kg total organic carbon (TOC)/m(3) day, with a removal efficiency of 92%. The rate of TOC removal by AUSB was highest at a pressure of 20 psig and it decreased when the pressure was increased to 25 psig and the flow recirculation rate was reduced to 600%. The TOC removal rate also decreased when the operating pressure was reduced to 0 and 15 psig, with corresponding increase in flow recirculation rates to 1,300 and 1,000%, respectively. Maintenance of a high dissolved oxygen level and a high flow recirculation rate was found to improve the substrate removal capacity of the AUSB system. The AUSB system was extremely effective in retaining the produced biomass despite a high upflow velocity and the overall sludge yield was only 0.24-0.32 g VSS/g TOC removed. However, the effluent TOC was relatively high due to the system's operation at a high organic loading.

Measuring performance of virtual learning environment system in higher education

Purpose – The purpose of this paper is to measure the performance of commercial virtual learning environment (VLE) systems, which helps the decision makers to select the appropriate system for their institutions. Design/methodology/approach – This paper develops an integrated multiple criteria decision making approach, which combines the analytic hierarchy process (AHP) and quality function deployment (QFD), to evaluate and select the best system. The evaluating criteria are derived from the requirements of those who use the system. A case study is provided to demonstrate how the integrated approach works. Findings – The major advantage of the integrated approach is that the evaluating criteria are of interest to the stakeholders. This ensures that the selected system will achieve the requirements and satisfy the stakeholders most. Another advantage is that the approach can guarantee the benchmarking to be consistent and reliable. From the case study, it is proved that the performance of a VLE system being used at the university is the best. Therefore, the university should continue to run the system in order to support and facilitate both teaching and learning. Originality/value – It is believed that there is no study that measures the performance of VLE systems, and thus decision makers may have difficulties in system evaluation and selection for their institutions.

Developing an enterprise simulator to support electronic supply chain for B2B electronic process

The application of any e-Solution promises significant returns. In particular, using internet technologies both within enterprises and across the supply (value) chain provides real opportunity, not only for operational improvement but also for innovative strategic positioning. However, significant questions obscure potential investment; how any value will actually be created and, importantly, how this value will be shared across the value chain is not clear. This paper will describe a programme of research that is developing an enterprise simulator that will provide a more fundamental understanding of the impact of e-Solutions across operational supply chains, in terms of both standard operational and financial measures of performance. An efficient supply chain reduces total costs of operations by sharing accurate real-time information and coordinating inter-organizational business processes. This form of electronic link between organizations is known as business-to-business (B2B) e-Business. The financial measures go beyond simple cost calculations to real bottom-line performance by modelling the financial transactions that business processes generate. The paper will show how this enterprise simulator allows for a complete supply chain to be modelled in this way across four key applications: control system design, virtual enterprises, pan-supply-chain performance metrics and supporting e-Supply-chain design methodology.

Business process orientated holonic (PrOH) modeling

Purpose: The purpose of this paper is to describe how the application of systems thinking to designing, managing and improving business processes has resulted in a new and unique holonic-based process modeling methodology know as process orientated holonic modeling. Design/methodology/approach: The paper describes key systems thinking axioms that are built upon in an overview of the methodology; the techniques are described using an example taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. These were produced in an 18 month project, using an action research approach, to improve quality and process efficiency. Findings: The findings of this research show that this new methodology can support process depiction and improvement in industrial sectors which are characterized by environments of high variety and low volume (e.g. projects; such as the design and manufacture of a radar system or a hybrid production process) which do not provide repetitive learning opportunities. In such circumstances, the methodology has not only been able to deliver holonic-based process diagrams but also been able to transfer strategic vision from top management to middle and operational levels without being reductionistic. Originality/value: This paper will be of interest to organizational analysts looking at large complex projects whom require a methodology that does not confine them to thinking reductionistically in "task-breakdown" based approaches. The novel ideas in this paper have great impact on the way analysts should perceive organizational processes. Future research is applying the methodology in similar environments in other industries. © Emerald Group Publishing Limited.