Digitisation of Cultural Heritage: between EU Priorities and Bulgarian Realities

* The part of this article presenting institutional involvement is an extended and updated version of the respective part of a report on Bulgaria prepared by Milena Dobreva for a MINERVAPlus Global Report (Coordinating digitisation in Europe. Progress report of the National Representatives Group: coordination mechanisms for digitisation policies and programmes 2004, forthcoming).

Review of industrial temperature measurement technologies and research priorities for the thermal characterisation of the factories of the future

As the largest source of dimensional measurement uncertainty, addressing the challenges of thermal variation is vital to ensure product and equipment integrity in the factories of the future. While it is possible to closely control room temperature, this is often not practical or economical to realise in all cases where inspection is required. This article reviews recent progress and trends in seven key commercially available industrial temperature measurement sensor technologies primarily in the range of 0 °C–50 °C for invasive, semi-invasive and non-invasive measurement. These sensors will ultimately be used to measure and model thermal variation in the assembly, test and integration environment. The intended applications for these technologies are presented alongside some consideration of measurement uncertainty requirements with regard to the thermal expansion of common materials. Research priorities are identified and discussed for each of the technologies as well as temperature measurement at large. Future developments are briefly discussed to provide some insight into which direction the development and application of temperature measurement technologies are likely to head.

A new paradigm in large-scale assembly-research priorities in measurement assisted assembly

This paper presents for the first time the concept of measurement assisted assembly (MAA) and outlines the research priorities of the realisation of this concept in the industry. MAA denotes a paradigm shift in assembly for high value and complex products and encompasses the development and use of novel metrology processes for the holistic integration and capability enhancement of key assembly and ancillary processes. A complete framework for MAA is detailed showing how this can facilitate a step change in assembly process capability and efficiency for large and complex products, such as airframes, where traditional assembly processes exhibit the requirement for rectification and rework, use inflexible tooling and are largely manual, resulting in cost and cycle time pressures. The concept of MAA encompasses a range of innovativemeasurement- assisted processes which enable rapid partto- part assembly, increased use of flexible automation, traceable quality assurance and control, reduced structure weight and improved levels of precision across the dimensional scales. A full scale industrial trial of MAA technologies has been carried out on an experimental aircraft wing demonstrating the viability of the approach while studies within 140 smaller companies have highlighted the need for better adoption of existing process capability and quality control standards. The identified research priorities for MAA include the development of both frameless and tooling embedded automated metrology networks. Other research priorities relate to the development of integrated dimensional variation management, thermal compensation algorithms as well as measurement planning and inspection of algorithms linking design to measurement and process planning. © Springer-Verlag London 2013.

Digitization of Cultural and Historical Heritage of Armenians in Bulgaria - Priorities and Perspectives

The paper deals with digitization as a method of protecting and preserving cultural and historical heritage of Armenians in Bulgaria. It attempts to establish the level of development of this process in the country, to identify the good examples and information gaps in order to outline the priorities and perspectives.

Servitization:revisiting the state-of-the-art and research priorities

Purpose – This paper consolidates the servitization knowledge base from an organisational change perspective, identifying developed, developing and undeveloped topics to provide a platform that directs future research. Design/methodology/approach – This paper addresses three objectives : a) it comprehensively examines organisational change management literature for selection of a theoretical framework, b) it classifies extant studies within the framework through a systemic literature review, and (c) it analyses 232 selected papers and proposes a research agenda. Findings – Analysis suggests increasing global awareness of the importance of services to manufacturers. However, some topics, especially related to servitization transformation, remain undeveloped. Research limitations/implications – Although the authors tried to include all publications relevant to servitization, some might not have been captured. Evaluation and interpretation relied on the research team and subsequent research workshops. Practical implications - One of the most significant challenges for practitioners of servitization is how to transform a manufacturing organisation to exploit the opportunity. This paper consolidates literature regarding servitization, identifying progress concerning key research topics and contributing a platform for future research. The goal is to inform research to result eventually in a roadmap for practitioners seeking to servitize. Originality/value - Although extant reviews of servitization identify themes that are examined well, they struggle to identify unanswered questions. This paper addresses this gap by focusing on servitization as a process of organisational change.

A Kullback-Leibler relatív entrópia függvény alkalmazása páros összehasonlítás mátrix egy prioritásvektora meghatározására (Applying the Kullback-Leibler relative entropy function for determining priorities for the pairwise comparison matrix)

A dolgozatban a döntéselméletben fontos szerepet játszó páros összehasonlítás mátrix prioritásvektorának meghatározására új megközelítést alkalmazunk. Az A páros összehasonlítás mátrix és a prioritásvektor által definiált B konzisztens mátrix közötti eltérést a Kullback-Leibler relatív entrópia-függvény segítségével mérjük. Ezen eltérés minimalizálása teljesen kitöltött mátrix esetében konvex programozási feladathoz vezet, nem teljesen kitöltött mátrix esetében pedig egy fixpont problémához. Az eltérésfüggvényt minimalizáló prioritásvektor egyben azzal a tulajdonsággal is rendelkezik, hogy az A mátrix elemeinek összege és a B mátrix elemeinek összege közötti különbség éppen az eltérésfüggvény minimumának az n-szerese, ahol n a feladat mérete. Így az eltérésfüggvény minimumának értéke két szempontból is lehet alkalmas az A mátrix inkonzisztenciájának a mérésére. _____ In this paper we apply a new approach for determining a priority vector for the pairwise comparison matrix which plays an important role in Decision Theory. The divergence between the pairwise comparison matrix A and the consistent matrix B defined by the priority vector is measured with the help of the Kullback-Leibler relative entropy function. The minimization of this divergence leads to a convex program in case of a complete matrix, leads to a fixed-point problem in case of an incomplete matrix. The priority vector minimizing the divergence also has the property that the difference of the sums of elements of the matrix A and the matrix B is n times the minimum of the divergence function where n is the dimension of the problem. Thus we developed two reasons for considering the value of the minimum of the divergence as a measure of inconsistency of the matrix A.

Federal Priorities: Investing in South Florida's Innovative Solutions Center

This report provides details about FIU's federally funded activities.

Priorities for representation : Task settings and object interaction both influence object memory

Portions of this research were presented at the Experimental Psychological Society conference at the University of Kent (May, 2014).The first author is supported by a studentship provided by the University of Dundee. This study was conducted as part of the requirements for the degree of Doctor of Philosophy by the first author.

Priorities for representation : Task settings and object interaction both influence object memory

Portions of this research were presented at the Experimental Psychological Society conference at the University of Kent (May, 2014).The first author is supported by a studentship provided by the University of Dundee. This study was conducted as part of the requirements for the degree of Doctor of Philosophy by the first author.

Using Bird Distributions to Assess Extinction Risk and Identify Conservation Priorities in Biodiversity Hotspots

Habitat loss, fragmentation, and degradation threaten the World’s ecosystems and species. These, and other threats, will likely be exacerbated by climate change. Due to a limited budget for conservation, we are forced to prioritize a few areas over others. These places are selected based on their uniqueness and vulnerability. One of the most famous examples is the biodiversity hotspots: areas where large quantities of endemic species meet alarming rates of habitat loss. Most of these places are in the tropics, where species have smaller ranges, diversity is higher, and ecosystems are most threatened.

Species distributions are useful to understand ecological theory and evaluate extinction risk. Small-ranged species, or those endemic to one place, are more vulnerable to extinction than widely distributed species. However, current range maps often overestimate the distribution of species, including areas that are not within the suitable elevation or habitat for a species. Consequently, assessment of extinction risk using these maps could underestimate vulnerability.

In order to be effective in our quest to conserve the World’s most important places we must: 1) Translate global and national priorities into practical local actions, 2) Find synergies between biodiversity conservation and human welfare, 3) Evaluate the different dimensions of threats, in order to design effective conservation measures and prepare for future threats, and 4) Improve the methods used to evaluate species’ extinction risk and prioritize areas for conservation. The purpose of this dissertation is to address these points in Colombia and other global biodiversity hotspots.

In Chapter 2, I identified the global, strategic conservation priorities and then downscaled to practical local actions within the selected priorities in Colombia. I used existing range maps of 171 bird species to identify priority conservation areas that would protect the greatest number of species at risk in Colombia (endemic and small-ranged species). The Western Andes had the highest concentrations of such species—100 in total—but the lowest densities of national parks. I then adjusted the priorities for this region by refining these species ranges by selecting only areas of suitable elevation and remaining habitat. The estimated ranges of these species shrank by 18–100% after accounting for habitat and suitable elevation. Setting conservation priorities on the basis of currently available range maps excluded priority areas in the Western Andes and, by extension, likely elsewhere and for other taxa. By incorporating detailed maps of remaining natural habitats, I made practical recommendations for conservation actions. One recommendation was to restore forest connections to a patch of cloud forest about to become isolated from the main Andes.

For Chapter 3, I identified areas where bird conservation met ecosystem service protection in the Central Andes of Colombia. Inspired by the November 11th (2011) landslide event near Manizales, and the current poor results of Colombia’s Article 111 of Law 99 of 1993 as a conservation measure in this country, I set out to prioritize conservation and restoration areas where landslide prevention would complement bird conservation in the Central Andes. This area is one of the most biodiverse places on Earth, but also one of the most threatened. Using the case of the Rio Blanco Reserve, near Manizales, I identified areas for conservation where endemic and small-range bird diversity was high, and where landslide risk was also high. I further prioritized restoration areas by overlapping these conservation priorities with a forest cover map. Restoring forests in bare areas of high landslide risk and important bird diversity yields benefits for both biodiversity and people. I developed a simple landslide susceptibility model using slope, forest cover, aspect, and stream proximity. Using publicly available bird range maps, refined by elevation, I mapped concentrations of endemic and small-range bird species. I identified 1.54 km2 of potential restoration areas in the Rio Blanco Reserve, and 886 km2 in the Central Andes region. By prioritizing these areas, I facilitate the application of Article 111 which requires local and regional governments to invest in land purchases for the conservation of watersheds.

Chapter 4 dealt with elevational ranges of montane birds and the impact of lowland deforestation on their ranges in the Western Andes of Colombia, an important biodiversity hotspot. Using point counts and mist-nets, I surveyed six altitudinal transects spanning 2200 to 2800m. Three transects were forested from 2200 to 2800m, and three were partially deforested with forest cover only above 2400m. I compared abundance-weighted mean elevation, minimum elevation, and elevational range width. In addition to analyzing the effect of deforestation on 134 species, I tested its impact within trophic guilds and habitat preference groups. Abundance-weighted mean and minimum elevations were not significantly different between forested and partially deforested transects. Range width was marginally different: as expected, ranges were larger in forested transects. Species in different trophic guilds and habitat preference categories showed different trends. These results suggest that deforestation may affect species’ elevational ranges, even within the forest that remains. Climate change will likely exacerbate harmful impacts of deforestation on species’ elevational distributions. Future conservation strategies need to account for this by protecting connected forest tracts across a wide range of elevations.

In Chapter 5, I refine the ranges of 726 species from six biodiversity hotspots by suitable elevation and habitat. This set of 172 bird species for the Atlantic Forest, 138 for Central America, 100 for the Western Andes of Colombia, 57 for Madagascar, 102 for Sumatra, and 157 for Southeast Asia met the criteria for range size, endemism, threat, and forest use. Of these 586 species, the Red List deems 108 to be threatened: 15 critically endangered, 29 endangered, and 64 vulnerable. When ranges are refined by elevational limits and remaining forest cover, 10 of those critically endangered species have ranges < 100km2, but then so do 2 endangered species, seven vulnerable, and eight non-threatened ones. Similarly, 4 critically endangered species, 20 endangered, and 12 vulnerable species have refined ranges < 5000km2, but so do 66 non-threatened species. A striking 89% of these species I have classified in higher threat categories have <50% of their refined ranges inside protected areas. I find that for 43% of the species I assessed, refined range sizes fall within thresholds that typically have higher threat categories than their current assignments. I recommend these species for closer inspection by those who assess risk. These assessments are not only important on a species-by-species basis, but by combining distributions of threatened species, I create maps of conservation priorities. They differ significantly from those created from unrefined ranges.

Setting priorities for private land conservation in fire-prone landscapes: Are fire risk reduction and biodiversity conservation competing or compatible objectives?

Although wildfire plays an important role in maintaining biodiversity in many ecosystems, fire management to protect human assets is often carried out by different agencies than those tasked for conserving biodiversity. In fact, fire risk reduction and biodiversity conservation are often viewed as competing objectives. Here we explored the role of management through private land conservation and asked whether we could identify private land acquisition strategies that fulfill the mutual objectives of biodiversity conservation and fire risk reduction, or whether the maximization of one objective comes at a detriment to the other. Using a fixed budget and number of homes slated for development, we simulated 20 years of housing growth under alternative conservation selection strategies, and then projected the mean risk of fires destroying structures and the area and configuration of important habitat types in San Diego County, California, USA. We found clear differences in both fire risk projections and biodiversity impacts based on the way conservation lands are prioritized for selection, but these differences were split between two distinct groupings. If no conservation lands were purchased, or if purchases were prioritized based on cost or likelihood of development, both the projected fire risk and biodiversity impacts were much higher than if conservation lands were purchased in areas with high fire hazard or high species richness. Thus, conserving land focused on either of the two objectives resulted in nearly equivalent mutual benefits for both. These benefits not only resulted from preventing development in sensitive areas, but they were also due to the different housing patterns and arrangements that occurred as development was displaced from those areas. Although biodiversity conflicts may still arise using other fire management strategies, this study shows that mutual objectives can be attained through land-use planning in this region. These results likely generalize to any place where high species richness overlaps with hazardous wildland vegetation.

Using Statistics to Set Priorities

In November 2015-March 2016, I assigned my Graduate Assistant, David Durden, a project to compile usage statistics and trends for digitized collections between 2013-2015 from UMD Digital Collections and our contributions to the Internet Archive between 2008-2015. The original intent of the project was to provide usage metrics to assist the Digitization Initiatives Committee in prioritizing projects or content areas. The project also uncovered trends that should impact how we think about making digital collections discoverable and accessible. For example, if 50-60% of traffic into UMD Digital Collections comes from outside the University or College Park, MD, how will this impact the potential usage of content when access is restricted to campus due to licensing, copyright, or ownership restrictions? With a growing population using mobile browsers, how will a flash-based viewer restrict users’ access to content? How might we develop content or its discoverability for a growing social media user base? In this talk, I will briefly discuss the usage trends for the represented collections, how we may use these in prioritizing future projects, and issues I will discuss with collection managers as we develop project plans and the Manager of Digital Programs and Initiatives as we develop the digital collections repository.

Managing Digitization Priorities with Metrics

This presentation was one of four during a Mid-Atlantic Regional Archives Conference presentation on April 15, 2016. Digitization of collections can help to improve internal workflows, make materials more accessible, and create new and engaging relationships with users. Laurie Gemmill Arp will discuss the LYRASIS Digitization Collaborative, created to assist institutions with their digitization needs, and how it has worked to help institutions increase connections with users. Robin Pike from the University of Maryland will discuss how they factor requests for access into selection for digitization and how they track the use of digitized materials. Laura Drake Davis of James Madison University will discuss the establishment of a formal digitization program, its impact on users, and the resulting increased use of their collections. Linda Tompkins-Baldwin will discuss Digital Maryland’s partnership with the Digital Public Library of America to provide access to archives held by institutions without a digitization program.