SEASONAL DISTRIBUTION OF MALARIA VECTORS (DIPTERA: CULICIDAE) IN RURAL LOCALITIES OF PORTO VELHO, RONDÔNIA, BRAZILIAN AMAZON

We conducted a survey of the malaria vectors in an area where a power line had been constructed, between the municipalities of Porto Velho and Rio Branco, in the states of Rondônia and Acre, respectively. The present paper relates to the results of the survey of Anopheles fauna conducted in the state of Rondônia. Mosquito field collections were performed in six villages along the federal highway BR 364 in the municipality of Porto Velho, namely Porto Velho, Jaci Paraná, Mutum Paraná, Vila Abunã, Vista Alegre do Abunã, and Extrema. Mosquito captures were performed at three distinct sites in each locality during the months of February, July, and October 2011 using a protected human-landing catch method; outdoor and indoor captures were conducted simultaneously at each site for six hours. In the six sampled areas, we captured 2,185 mosquitoes belonging to seven Anopheles species. Of these specimens, 95.1% consisted of Anopheles darlingi, 1.8% An. triannulatus l.s., 1.7% An. deaneorum, 0.8% An. konderi l.s., 0.4 An. braziliensis, 0.1% An. albitarsis l.s., and 0.1% An. benarrochi. An. darlingi was the only species found in all localities; the remaining species occurred in sites with specific characteristics.

Observations on aquatic Macrophyte Dynamics In the Reservoir Of The Balbina Hydroelectric Powerplant, Amazonas State, Brazil

Between 1991 and 1995 aquatic macrophyte composition was observed in the lower part of the reservoir of the hydroelectric power plant of Balbina (Amazonas, Brazil). After closure of the dam in 1987, vegetation cover - mostly Eichhornia crassipes - was high, but was not quantified. After 1990 it declined rapidly with a characteristic succession pattern: Eichhornia ® Vincularia + Cyperaceae ® Salvinia. The Cyperaceae, and many other less dominant species, were mostly associated with drift wood, produced by the decomposing, emergent forest. Comparison of the chemical data of the Uatumã river before the construction of the dam (1983) with those of later years (1989 - 1995) suggests that the succession was the result of a relatively mild and short period of eutrophication, followed by declining nutrient levels. Annual variation of water levels, followed by aquatic and terrestrial decomposition of the marginal vegetation, may allow for the maintenance of relatively productive vegetation belts along the shore lines of islands and inundated stream valleys.

Forest structure of artificial islands in the Tucuruí dam reservoir in northern Brazil: a test core-area model

Construction of hydroelectric dams in tropical regions has been contributing significantly to forest fragmentation. Alterations at edges of forest fragments impact plant communities that suffer increases in tree damage and dead, and decreases in seedling recruitment. This study aimed to test the core-area model in a fragmented landscape caused by construction of a hydroelectric power plant in the Brazilian Amazon. We studied variations in forest structure between the margin and interiors of 17 islands of 8-100 hectares in the Tucuruí dam reservoir, in two plots (30 and >100m from the margin) per island. Mean tree density, basal area, seedling density and forest cover did not significantly differ between marginal and interior island plots. Also, no significant differences were found in liana density, dead tree or damage for margin and interior plots. The peculiar topographic conditions associated with the matrix habitat and shapes of the island seem to extend edge effects to the islands' centers independently of the island size, giving the interior similar physical microclimatic conditions as at the edges. We propose a protocol for assessing the ecological impacts of edge effects in fragments of natural habitat surrounded by induced (artificial) edges. The protocol involves three steps: (1) identification of focal taxa of particular conservation or management interest, (2) measurement of an "edge function" that describes the response of these taxa to induced edges, and (3) use of a "Core-Area Model" to extrapolate edge function parameters to existing or novel situations.

Desenvolvimento de um mecanismo automatizado de limpeza de uma grelha de uma barragem mini-hídrica

Dissertação de mestrado integrado em Engenharia Mecânica

Implementação de metodologias BIM na Direção de Engenharia de Barragens da EDP: casos de estudo de projeto de estruturas em obras hidroelétricas

Dissertação de mestrado integrado em Engenharia Civil

Очистка дымовых газов теплоэлектростанций (ТЭС) от пыли и сернистого ангидрида

დამუშავებულია თბოელექტროსადგურების გამონაბოლქვი აირების მტვრისა და გოგირდოვანი ანჰიდრიდისაგან გაწმენდის მეთოდი. ამ მიზნით გამოყენებულია ქვანახშირის წვის შედეგად მიღებული მყარი ნარჩენების სუსპენზია, რომლის კონცენტრაცია შეადგენს 30-40 გ/ლ. მძიმე მეტალების მოცილების მიზნით ხსნარს ემატება 1,5-2,0 გ/ლ კონცენტრაციის ბარიუმის სულფიდის ხსნარი.

Trophic ecology of Lontra longicaudis (Carnivora, Mustelidae) in lotic and semilotic environments in southeastern Brazil

Lontra longicaudis (Olfers, 1818) (Carnivora, Mustelidae) is a semi-aquatic animal spread through the Central and South America, except in Chile. The implantation of a hydroelectric power plant along a river alters the dynamics of the watercourse, transforming a lotic environment into a lentic or semilotic one, what can damage the otter's feeding. From April 2008 to March 2009 we analysed the otter's food habits in lotic (streamlet) and semilotic (hydroelectric reservoir) environments of Paranapanema Valley, in southeastern Brazil. Aiming to compare the otter's diet of these two environments, we analyzed statistically the frequency of occurrence of main items in the scats. Fishes represent the base of the diet both in the reservoir and in the streamlet and, despite of the total otter's diet showing up similarities in the two environments, the results evidenced modifications on the fish species consumed between them. In the reservoir the otters ate more exotic fish Oreochromis niloticus (Linnaeus, 1758) probably because it is an easy capture prey in this place. The fact that the otters get established and feed in the reservoir doesn't mean that this structure is benefic to the species because the food supplied for it consists mainly of exotic fish species.

Intercomparison of the response of different photon and neutron detectors around a spent fuel cask

An intercomparison of the response of different photon and neutron detectors was performed in several measurement positions around a spent fuel cask (type TN 12/2B) filled with 4 MOX and 8 UO2 15 x 15 PWR fuel assemblies at the nuclear power plant Gosgen (KKG) in Switzerland. The instruments used in the study were both active and passive, photon and neutron detectors calibrated either for ambient or personal dose equivalent. The aim of the measurement campaign was to compare the responses of the radiation instruments to routinely used detectors. It has been shown that especially the indications of the neutron detectors are strongly dependent on the neutron spectra around the cask due to their different energy responses. However, routinely used active photon and neutron detectors were shown to be reliable instruments. (C) 2012 Elsevier Ltd. All rights reserved.

CO2 emissions embodied in international trade: A multiregional Inputoutput model for Spain

As a result of globalization and free trade agreements, international trade is enormously growing and inevitably putting more pressure on the environment over the last few decades. This has drawn the attention of both environmentalist and economist in response to the ever growing concerns of climate change and urgent need of international action for its mitigation. In this work we aim at analyzing the implication of international trade in terms of CO2 between Spain and its important partners using a multi-regional input-output (MRIO) model. A fully integrated 13 regions MRIO model is constructed to examine the pollution responsibility of Spain both from production and consumption perspectives. The empirical results show that Spain is a net importer of CO2 emissions which is equivalent to 29% of its emission due to production. Even though the leading partner with regard to import values are countries such as Germany, France, Italy and Great Britain, the CO2 embodied due to trade with China takes the largest share. This is mainly due to the importation of energy intensive products from China coupled with Chinese poor energy mix which is dominated by coal-power plant. The largest portion (67%) of the global imported CO2 emissions is due to intermediate demand requirements by production sectors. Products such as Motor vehicles, chemicals, a variety of machineries and equipments, textile and leather products, construction materials are the key imports that drive the emissions due to their production in the respective exporting countries. Being at its peak in 2005, the Construction sector is the most responsible activity behind both domestic and imported emissions.

Proyecto de ejecución para las obras de concesión de dominio público para la reforma y adecuación de la central térmica y de la red de saneamiento en un hospital de 350 camas

El Hospital Punta de Europa en Algeciras (Cádiz), centro sanitario del Servicio Andaluz de Salud, desea optimizar la gestión de sus instalaciones de generación de energía térmica (vapor, agua caliente sanitaria y agua caliente de calefacción) y adecuarlas a la normativa vigente así como la sustitución de bajantes del edificio, para lo cual sacará a concurso público la licitación para la concesión de dominio público de dichas instalaciones. Para definir el alcance y condiciones de la citada concesión, el Hospital Punta de Europa (Algeciras) del Servicio Andaluz de Salud ha solicitado a Pedro Alonso Martín el estudio para la reforma y adecuación de las instalaciones productoras de energía térmica del citado Hospital. El objetivo principal de este trabajo es hacer un estudio, propuesta y valoración de las actuaciones necesarias para la reforma y mejora de la explotación de las instalaciones generadoras de energía térmica y de la red saneamiento interior del Hospital Punta de Europa de Algeciras (Cádiz). Las actuales instalaciones de generación térmica consumidoras de energía del hospital dentro del alcance de este Proyecto son: Generación de vapor (lavandería y esterilización). Producción de agua caliente sanitaria (ACS). Producción de agua caliente de calefacción. La mayoría de los equipos productores de energía datan del año 1975, por lo que en la mayoría de los casos se ha cumplido su plazo de amortización y periodo de vida útil. Se hace necesaria la instalación de gas natural, debido a que se tendrá que abastecer a todas las calderas de la central térmica. El diseño del sistema de producción de agua caliente sanitaria garantiza el máximo confort y economía del usuario, compatible con el máximo ahorro energético y la protección del medio ambiente, cubriendo las necesidades de agua caliente sanitaria mediante la combinación de un sistema de calderas a gas con los colectores solares.

Advanced geostatistical and machine-learning models for spatial data analysis of radioactively contaminated regions

Radioactive soil-contamination mapping and risk assessment is a vital issue for decision makers. Traditional approaches for mapping the spatial concentration of radionuclides employ various regression-based models, which usually provide a single-value prediction realization accompanied (in some cases) by estimation error. Such approaches do not provide the capability for rigorous uncertainty quantification or probabilistic mapping. Machine learning is a recent and fast-developing approach based on learning patterns and information from data. Artificial neural networks for prediction mapping have been especially powerful in combination with spatial statistics. A data-driven approach provides the opportunity to integrate additional relevant information about spatial phenomena into a prediction model for more accurate spatial estimates and associated uncertainty. Machine-learning algorithms can also be used for a wider spectrum of problems than before: classification, probability density estimation, and so forth. Stochastic simulations are used to model spatial variability and uncertainty. Unlike regression models, they provide multiple realizations of a particular spatial pattern that allow uncertainty and risk quantification. This paper reviews the most recent methods of spatial data analysis, prediction, and risk mapping, based on machine learning and stochastic simulations in comparison with more traditional regression models. The radioactive fallout from the Chernobyl Nuclear Power Plant accident is used to illustrate the application of the models for prediction and classification problems. This fallout is a unique case study that provides the challenging task of analyzing huge amounts of data ('hard' direct measurements, as well as supplementary information and expert estimates) and solving particular decision-oriented problems.

Experimental thermal hydraulic studies on the enhancement of safety of LWRs

The safe use of nuclear power plants (NPPs) requires a deep understanding of the functioning of physical processes and systems involved. Studies on thermal hydraulics have been carried out in various separate effects and integral test facilities at Lappeenranta University of Technology (LUT) either to ensure the functioning of safety systems of light water reactors (LWR) or to produce validation data for the computer codes used in safety analyses of NPPs. Several examples of safety studies on thermal hydraulics of the nuclear power plants are discussed. Studies are related to the physical phenomena existing in different processes in NPPs, such as rewetting of the fuel rods, emergency core cooling (ECC), natural circulation, small break loss-of-coolant accidents (SBLOCA), non-condensable gas release and transport, and passive safety systems. Studies on both VVER and advanced light water reactor (ALWR) systems are included. The set of cases include separate effects tests for understanding and modeling a single physical phenomenon, separate effects tests to study the behavior of a NPP component or a single system, and integral tests to study the behavior of the whole system. In the studies following steps can be found, not necessarily in the same study. Experimental studies as such have provided solutions to existing design problems. Experimental data have been created to validate a single model in a computer code. Validated models are used in various transient analyses of scaled facilities or NPPs. Integral test data are used to validate the computer codes as whole, to see how the implemented models work together in a code. In the final stage test results from the facilities are transferred to the NPP scale using computer codes. Some of the experiments have confirmed the expected behavior of the system or procedure to be studied; in some experiments there have been certain unexpected phenomena that have caused changes to the original design to avoid the recognized problems. This is the main motivation for experimental studies on thermal hydraulics of the NPP safety systems. Naturally the behavior of the new system designs have to be checked with experiments, but also the existing designs, if they are applied in the conditions that differ from what they were originally designed for. New procedures for existing reactors and new safety related systems have been developed for new nuclear power plant concepts. New experiments have been continuously needed.

Monipolttoainekattilan päästöjen tarkkailu ja raportointi

Suurten polttolaitosten päästöjen tarkkailu- ja raportointivaatimukset ovat uudistuneet viime vuosina paljon. Suurimpia muutosten aiheuttajia ovat Valtioneuvoston asetus 1017/2002 ja standardi EN-14181. Tässä työssä kuvataan uudet vaatimukset täyttävän päästöjen tarkkailu- ja raportointijärjestelmän rakentaminen monipolttoainekattilalle. Aluksi esitellään mitä uusia vaatimuksia päästöjen tarkkailulle ja raportoinnille on tullut viime aikoina. Lisäksi selvitetään vaatimusten mahdolliset ristiriidat ja ristiriitatilanteiden ratkaisutavat. Seuraavaksi esitellään vaatimukset täyttävän järjestelmän määritelmät. Erityisestiselvitetään kattilan erityispiirteiden vaatimia ratkaisuja. Lopuksi esitellään päästöjen tarkkailu- ja raportointijärjestelmän käyttökokemuksia ja parantamismahdollisuuksia. Kaikki tarkastelut tehdään ensisijaisesti toiminnanharjoittajan näkökulmasta. Järjestelmä toteutettiin Stora Enso Oyj:n Heinolan Flutingtehtaan voimalaitoksen pääkattilalle, jossa käytetään laajaa polttoainevalikoimaa. Toteutuspaikan valinta tehtiin sillä perusteella, että uudet päästöjen tarkkailu- ja raportointivaatimukset ovat erityisen haasteellisia monipolttoainekattiloiden tapauksessa. Työssä selvitetään järjestelmän soveltamismahdollisuuksia myös kahdella muulla Stora Enson tehtaalla. Käyttöönottovaiheen johtopäätöksenä todettiin päästöjen tarkkailu- ja raportointijärjestelmän täyttävän sille asetetut vaatimukset. Lisäksi havaittiin, että toiminnanharjoittajan kannattaa panostaa erityisesti järjestelmän joustavuuteen, luotettavuuteen, helppokäyttöisyyteen ja vikasietoisuuteen. Toiminnanharjoittaja pystyy määrittelyvaiheessa vaikuttamaan järjestelmän ominaisuuksiin helpommin ja edullisemmin kuin käyttöönoton jälkeen. Toiminnanharjoittajalta vaadittu työtuntimäärä arvioitiin Heinolan Flutingtehtaan tapauksen perusteella. Lopuksi selvitettiin mahdollisia tulevaisuuden kehityskohteita vastaavissa järjestelmissä.

Oulun Energian kaukolämpöverkoston ja -tuotannon kehitys vuosina 2006 - 2020

Tässä diplomityössä on tarkasteltu Oulun Energian kaukolämpötoiminnan kehitystä lähitulevaisuudessa. Työn yhteydessä selvitettiin nykyisessä tilanteessa mitoituslämpötilaa -32 oC vastaava tehotilastollisen analyysin avulla ja laadittiin kasvuennuste kaukolämmityksen tehontarpeesta seuraavalle viidelletoista vuodelle. Kasvuennusteen perusteella on tehty tarkastelu kaukolämmön varatehon riittävyydestä. Verkoston tehonsiirtokykyä nykyisissä ja tulevaisuuden kuormitustilanteissa on tarkasteltu Process VisioninGrades Heating -verkostolaskentaohjelmiston avulla. Tarkastelun perusteella kaukolämpöverkoston siirtokyky on kohtalaisen hyvä. Verkoston ongelmakohtia ovat länsi-itäsuunnassa olevat siirtolinjat. Varatehon määrä tulee laskemaan lähivuosina alle suositeltavan määrän, mikäli uutta lämmöntuotantokapasiteettia ei rakenneta. Alkuvaiheessa paras ratkaisu tilanteen korjaamiseksi olisi uusien lämpökeskusten rakentaminen sekä kaupungin etelä- että itä-osiin. 2010-luvulla tarve uuden voimalaitoksen rakentamiselle kaukolämpötehon tarpeen kattamiseksi tulee kasvamaan.

Laivan voimalaitoksen ja jännitevälipiirillisen ruoripotkurikäytön vuorovaikutusten mallintaminen

Diplomityössä on tutkittu sähköisellä potkurijärjestelmällä varustetun laivan voimalaitoksen ja jännitevälipiirillisen propulsiokäytön vuorovaikutusta laivan hätäpysäytyksen aikana. Työssä on kehitetty simulointimalleja jännitevälipiirillisten sähkökäyttöjen simuloimiseksi Saber -simulontiohjelmistolla.Työn alkuosassa esitetään lyhyt yhteenveto laivan sähköisestä potkurijärjestelmästä komponentteineen, käsitellään laivan hätäpysäytyksen teoriaa sekä simuloinneissa huomioonotettavia laivan ja potkurin hydrodynaamisia ominaisuuksia. Työssä käytettävän simulointiohjelmiston toimintaa selvitetään lyhyesti. Jännitevälipiirillisellä propulsiokäytöllä varustetun laivan hätäpysäytyksen simulointimalli esitellään kokonaisuudessaan ja käsitellään simulointimallin sisältämien osakokonaisuuksien teoriaa ja toimintaa. Kehitetyn simulointimallin toimintaa on tarkasteltu vertaamalla tuloksia vastaavansyklokonvertterikäytöllä varustetun laivan simulointituloksiin sekä vertaamallasimulointituloksia laivan merikoeajon yhteydessä tehtyihin mittauksiin. Simulointitulokset vastasivat teoriaa sekä mittaustuloksia varsin hyvin. Voimalaitoksenosalta ei mittaustuloksia ollut käytettävissä, mutta simulointitulokset ovat teorian mukaisia.