Stunning method in broiler chickens meat processing

Quality is a variable concept, which involves many factors, depending on the consumer market. In meat production, the concern with environmental aspects, animal welfare and the health and safety of workers is increasing. This work studied the effect of controlled atmosphere stunning of broilers on meat features and biochemical parameters for stress. Cobb broilers were stunned by electrical stunning and by controlled atmosphere with 70% CO2 and 70% CO2 + 30% Argon. After stunning, serum levels of glucose, lactate and corticosterone were compared with those of broilers at rest, immediately before transportation and slaughter and after 12 h of feed withdrawal (control group). At slaughter, blood volume drained during bleeding was not different for the stunning methods tested, ranging from 3.3 to 3.4% birds weight. This finding was important to demonstrate that gas stunning was not responsible for the animals′ death. Final pH in breast (6.1 to 6.2) and thigh (6.3 to 6.5) also did not vary among the different stunning methods (P > 0.05). Lightness (L = 60.55) and redness (a = +8.94) values found for breasts from electrical stunning showed that they were darker and redder (P < 0.05), probably due to changes in blood pressure. Glucose and corticosterone levels were not different between gas stunned birds (302.45 to 315.7 mg/dl and 55.71 to 72.49 ng/ml respectively) and birds at rest (305.95 mg/dl and 50.65 ng/ml) (P > 0.05). These stress indicators were higher (337.65 mg/dl for glucose and 104.13 ng/ml for costicosterone) when electrical stunning was used (P < 0.05). Lactate concentrations were lower (5.4 mmol/l) for birds at rest (P < 0.05) but not different for all stunning methods tested (7.3 to 8.1 mmol/l; P > 0.05). These results show that serum glucose may be used as a stress indicator in birds, with the advantage of being a quick and cheap biochemical test. Gas stunning favored birds′ management during slaughter and so reduced workers′ effort and injury hazard and the amount of feces and dust in the room. To make this method available for a large scale process, adjustments in equipments will be necessary to avoid delays in the processing line.

Importância da avaliação do ciclo de vida na análise de produtos: possíveis aplicações na construção civil

Much has been discussed lately about reusing waste in new construction materials and countless studies have been carried out based on this objective. However, before these products can be called “sustainable” and a recycling system can be effectively implemented, it is fundamental for all the aspects involved in this action to be understood, and more important, what are the true gains for the productive sector and what are the benefits for the environment if this was to occur. In order to obtain a general framework for all environmental aspects and potential impacts associated with these products, over their entire life cycle, the most appropriate methodology is the Life Cycle Assessment (LCA). In view of the above, the objective of this work is to provide an overview of current studies of LCA, its history, its importance, its standards and the methodology employed and its applications related to civil construction. It is expected, to obtain a more complete scenario of the influences from a study of LCA, as well as establishing a contribution for the assessment of specific products and processes for civil construction, disseminating the importance of the use of this tool within the sector.

Proposta de trilha interpretativa para a Floresta Estadual Edmundo Navarro de Andrade (FEENA) - Rio Claro

Within the current context of environmental degradation, primarily caused by unsustainable pat terns of production and consumption (AGENDA 21, 1992), the Protected Areas (PAs) are considered internationally as one of the most successful measures for the conservat ion of biodiversity, according to the Union for the Conservation of Nature (IUCN). The city of Rio Claro (Sao Paulo, Brazi l ) has a significant conservation area in both environmental aspects as historical and cultural, the State Forest 'Edmundo Navarro de Andrade' (FEENA). Beyond the conservation measures, there is a need to develop environmental education that encourages community participation and appreciation in the unit 's maintenance and protection, as well as provide moments of reflection that could conduct perceptual changes, behavioral, attitudinal and evaluative on relations between human beings and their environment . This work brings the proposal to create an interpretive trail in the area of public use of FEENA to contribute to the Unit Management Plan in order to make it an Environmental Education tool. To prepare the planning of the interpretive trail, a deep bibliographic and cartographic review was performed on the subject. It was applied questionnaires in order to know the visitors better and map the features of public visitation, as well as map the visitor preferences about how they would like to receive information on the area and expose field studies in the track site. The trail was traced taking into account the environmental and social aspects, we propose a track suspended above the ground, in order to affect as little as possible and to include the area in the context of PAs people with reduced mobility and visually impaired

Construção de índice percentual de “status” de desenvolvimento sus-tentável de assentamentos rurais utilizando procedimento estatísti-co multivariado

The objective of the present work is the construction of percentual indexes of sustainable development "Status" - PIDSD (%) aiming to order and classify the rural settlements, considering agricultural, socioeconomic and environmental aspects, in order to diagnose their sustainable reality. This way, we considered multivariate statistical procedure to establish analytical descriptors - indexes - like the principal components technique (CP). The CP technique was used in a matrix formed by 47 variables observed in 50 rural settlements, distributed in seven different regions of the state of Mato Grosso, obtained from diagnostics, provided by "Mato-Grossense" Enterprise of Research, Assistance and Rural Extension S/A - EMPAER - MT, in order to obtain the indexes used in the construction of PIDSD (%). The settlements with higher PIDSD (%) were considered "higher potential" or "higher sustainable" in relation to the analyzed variables, making the establishment of assistance strategies and cooperation possible, allowing the government and civil society in general, to improve those with worse results ("lower potential" or "lower sustainable"), and search for ways to strengthen and multiply the results of the "higher potential" settlements. Vale do Seringal settlement had the best conditions in relation to the variables, mainly those of higher weigh and was considered the one with "higher potential". São Sebastião had the worst conditions and was considered "lower potential".

Conflito de interesses ambientais: o passado, o presente e o futuro da gestão sustentávelno município de Botucatu (SP)

Entrepreneurs responsible for the housing project “Vale do Sol III”, (claim of deployment), proposed a technique, in order to resolve conflicts of interest arising in respect Vale do Sol I residents (already implemented). Conflicts taken place in accordance with environmental problems that originated (past) in poor drainage of rainwater from Água Fria stream. This work, based on study case method with deductive approach, analyzed the environmental aspects of the area in order to contribute to the process of sustainable management of medium-sized cities (present), as well as analyzing the prospects for adequate outcome environmental demand (future) . In terms of technical and methodological procedures, was used geoprocessing softwares for the purpose of supporting analysis. It was concluded that, technique proposed at Vale do Sol III enterprise, don’t have necessary, sufficient and satisfactory solution in order to, at least, mitigate the problems of area sustainability. In terms of future prospects, it was concluded that, good sustainable environmental management, with preventive measures, from the point of view of mitigating the environmental and urban conflicts, and corrective measures.

Conflito de interesses ambientais e urbanísticos dentro do contexto da gestão sustentável de cidades de médio porte no Estado de São Paulo

Responsible entrepreneurs responsible for housing project "Vale do Sol III" (claim of deployment) had proposed technique in order to solve conflicts of interest, arising with respect to residents of Vale do Sol I (already implemented). Conflicts gave up due to environmental and urban problems, originated in a notification of responsible concessionaire for the administration of Marechal Rondon highway (entry and exit of people on the road, in the city of Botucatu, Sao Paulo state). This work, based on study case method, within a deductive approach, analyzed urban and environmental aspects of the area in order to contribute to sustainable management of medium-sized cities. There was, moreover, use of GIS software for purpose of supporting this technical analysis. Investigations were carried out within environmental and urban viewpoints about Água Fria watershed, as well as technical and legal basis arising devices both municipal and federal regulations. It was concluded that proposed project of Vale do Sol III, about containment of stormwater and alternative technical and locational traffic, not presented as necessary solution, sufficient and satisfactory in the sense of, at least, mitigate sustainability problems of surrounding area (Água Fria watershed, into which could insert even Vale do Sol I condominium, subject to notification).

Propostas para a elaboração de plano de gestão para a praia de Macapá - Luis Correia - PI

Pós-graduação em Geografia - IGCE

Cenários da expansão urbana e da legislação e os reflexos na cobertura vegetal arbórea e arbustiva na cidade de Americana-SP

Pós-graduação em Geografia - IGCE

Benefícios na execução de uma obra sustentável em contrapartida aos métodos tradicionais da construção civil

The civil construction sector in Brazil is, simultaneously, a necessity that drives the economy and an evil that degrades the environment. Simple choices adopted in an enterprise can make big difference in harm caused by constructive practices, minimizing its harmful to the environment and making it sustainable. These choices, however, involve the use of materials and techniques often unknown by the builders, since the construction industry is very traditional. Even worse, the eco-friendly materials and sustainable techniques also face another obstacle to its use: the prejudice. Builders and customers prefer traditional methods to sustain belief that they present lower quality and higher price. This work raises awareness of the urgency with traditional methods must be overridden, showing practical and simple ways for this replacement, as well as confirm the quality equal to or even higher in the use of alternative materials and techniques, without addition in cost. Thus, the benefits are generated for all parties involved, from builders to residents

Projeto de condomínio residencial sustentável

It's devised in this work the starting project for the implementation of a residential condominium, focused in the use of technics and technologies to attain sustainability, also stretching to the pilot project for the model house. It's highlighted the methods for exploitation and reuse of water, energy conservation and reduction of environmental impacts. The proposal is to demonstrate the possibility of the use of simple, but effective, ecology technics to make an environmentally sustainable and economically viable project. The main motivators for this work is the growing hydric crisis faced by São Paulo state and the unpaired importance of the sustainability concept as the fundamental term to surmount the challenge of supplying the needs of the current generation without jeopardizing the future of the next generations

Aproveitamento da água de chuva para fins não potáveis para um condomínio sustentável: um estudo de caso

The End of Course Work this aims, the hydrological cycle of water on our planet, and explain about its importance in the lives of living beings, finally, carry out a detailed analysis regarding the financial feasibility of implementing a system Shauer sustainable in the condominium, the first being the pickup of river water, which will use a reservoir for capitation and filtering, a reservoir for water storage filtered and pumps that will redirects it to outside faucets and toilets use in residences

Certificações ambientais para construções civis

Over the recent human history within the last centuries the environmental degradation has been accumulating and growing rampantly causing effects today easily perceived by all. Because of this, today we can say that there is almost a consensus among the world population's concern with the environment in order to seek to minimize these effects immediately in addition to not aggravate the situation for future generations. Thus today it is common to find a wide range of products with this ideal of sustainable commitment in the various commercial areas. The construction industry has a responsibility to be a major cause of these impacts to the environment, so it is also one of the main vectors able to mitigate the degradation of the environment. In order to encourage, oversee and promote the sustainable attitudes within the construction area emerged environmental certifications. In this work it's exposed some of the major certifications for civilian buildings, highlighting the Selo Azul da Caixa that appears as a good choice focused on the Brazilian reality

Gás natural no panorama brasileiro e um estudo de caso no setor automotivo

The intended purpose of this paper is to present the main aspects of natural gas applied to the public transportation as well as the environmental, economical and technical impacts in this sector. Also it is given specific information to be considered when comparing natural gas to other fuels, specially the diesel. At this point is presented the types of internal combustion engines (Otto and Diesel cycle) and which type is used in each vehicle. Moreover, it is presented the main standards pollutant emission (Euro, US and Proconve) with a brief explanation of the tests made in order to approve the engines. This paper is focused on heavy duty vehicles. Also in this paper is exposed the economic impact due to the natural gas use in the public transportation fleet. In addition is presented a real case (of Berlin) and an estimative to a Brazilian city, presenting the potential of natural gas as vehicular fuel in Brazil, as well as financial and environmental aspects of the substitution

EDiferentes tipologias de edificação e o ser sustentável mediante o LEED e o CBCS

The principles and dimensions of sustainability concept is increasingly gaining ground within the building industry. Over the past decades, its applicability within the different environments and for different buildings typologies have been study to attend better the present populations and future generations. It is within this scenario that international certifications started to appear. The most famous and developed one being LEED certification system. In Brazil, as a support to the certification and also sustainability practices and conducts, was founded the Brazilian Council for Sustainable Construction (CBCS). The council and the certifications have the objective to disseminate and generate awareness to reduce energy and water consumption, aiming for life quality. Many constructions around de country have already the international certification, which also boost the rise of national certifications with specific criteria for the national context. However, such certificates are mainly destiny for medium and high standard buildings, often as a commercial advantage to explain the high costs. The purpose of this work is to be able to define what is being sustainable in the construction industry, taking for basis, LEED and CBCS. In addition, since there is a significant increase in the production of Housing Social Interest, the other angles will be to analyze how to apply the practices and sustainable technologies for low-cost projects with the objective to balance the three dimensions of sustainability: environmental, social and economics.

Preparation of Coated Microtools for Electrochemical Machining Applications

PREPARATION OF COATED MICROTOOLS FOR ELECTROCHEMICAL MACHINING APPLICATIONS Ajaya K. Swain, M.S. University of Nebraska, 2010 Advisor: K.P. Rajurkar Coated tools have improved the performance of both traditional and nontraditional machining processes and have resulted in higher material removal, better surface finish, and increased wear resistance. However, a study on the performance of coated tools in micromachining has not yet been adequately conducted. One possible reason is the difficulties associated with the preparation of coated microtools. Besides the technical requirement, economic and environmental aspects of the material and the coating technique used also play a significant role in coating microtools. This, in fact, restricts the range of coating materials and the type of coating process. Handling is another major issue in case of microtools purely because of their miniature size. This research focuses on the preparation of coated microtools for pulse electrochemical machining by electrodeposition. The motivation of this research is derived from the fact that although there were reports of improved machining by using insulating coatings on ECM tools, particularly in ECM drilling operations, not much literature was found relating to use of metallic coating materials in other ECM process types. An ideal ECM tool should be good thermal and electrical conductor, corrosion resistant, electrochemically stable, and stiff enough to withstand electrolyte pressure. Tungsten has almost all the properties desired in an ECM tool material except being electrochemically unstable. Tungsten can be oxidized during machining resulting in poor machining quality. Electrochemical stability of a tungsten ECM tool can be improved by electroplating it with nickel which has superior electrochemical resistance. Moreover, a tungsten tool can be coated in situ reducing the tool handling and breakage frequency. The tungsten microtool was electroplated with nickel with direct and pulse current. The effect of the various input parameters on the coating characteristics was studied and performance of the coated microtool was evaluated in pulse ECM. The coated tool removed more material (about 28%) than the uncoated tool under similar conditions and was more electrochemical stable. It was concluded that nickel coated tungsten microtool can improve the pulse ECM performance.