A New Yardstick for Rating Dental Arch Relationship in Patients With Complete Bilateral Cleft Lip and Palate

Objective: To develop yardsticks for assessment of dental arch relationship in young individuals with repaired complete bilateral cleft lip and palate appropriate to different stages of dental development. Participants: Eleven cleft team orthodontists from five countries worked on the projects for 4 days. A total of 776 sets of standardized plaster models from 411 patients with operated complete bilateral cleft lip and palate were available for the exercise. Statistics: The interexaminer reliability was calculated using weighted kappa statistics. Results: The interrater weighted kappa scores were between .74 and .92, which is in the ""good"" to ""very good"" categories. Conclusions: Three bilateral cleft lip and palate yardsticks for different developmental stages of the dentition were made: one for the deciduous dentition (6-year-olds` yardstick), one for early mixed dentition (9-year-olds` yardstick), and one for early permanent dentition (12-year-olds` yardstick).

A Longitudinal Three-Center Study of Dental Arch Relationship in Patients With Bilateral Cleft Lip and Palate

Objective: To compare and evaluate longitudinally the dental arch relationships from 4.5 to 13.5 years of age with the Bauru-BCLP Yardstick in a large sample of patients with bilateral cleft lip and palate (BCLP). Design: Retrospective longitudinal intercenter outcome study. Patients: Dental casts of 204 consecutive patients with complete BCLP were evaluated at 6, 9, and 12 years of age. All models were identified only by random identification numbers. Setting: Three cleft palate centers with different treatment protocols. Main Outcome Measures: Dental arch relationships were categorized with the Bauru-BCLP yardstick. Increments for each interval (from 6 to 9 years, 6 to 12 years, and 9 to 12 years) were analyzed by logistic and linear regression models. Results: There were no significant differences in outcome measures between the centers at age 12 or at age 9. At age 6, center B showed significantly better results (p = .027), but this difference diminished as the yardstick score for this group increased over time (linear regression analysis), the difference with the reference category (center C, boys) for the intervals 6 to 12 and 9 to 12 years being 10.4% (p = .041) and 12.9% (p = .009), respectively. Conclusions: Despite different treatment protocols, dental arch relationships in the three centers were comparable in final scores at age 9 and 12 years. Delaying hard palate closure and employing infant orthopedics did not appear to be advantageous in the long run. Premaxillary osteotomy employed in center B appeared to be associated with less favorable development of the dental arch relationship between 9 and 12 years.

Sculptural abstraction of landscape

The purpose of my Senior Scholar project was to create a series of sculptures that are based on the interaction of natural forms within a selected landscape setting. I hope to convey a sense of how I view and interpret the landscape and to create works that stimulate a sense of wonder in the mind of the viewer. This fascination, perhaps even obsession, with the power of the landscape has kept me going throughout the year. As a source of ideas and imagery, the landscape can never be depleted. There will always be new combinations of landscape elements, different light conditions, and changing seasons to provide me with fresh ideas. Research for the project took me to many different places, be it my trip to Monhegan Island or driving to New York City to study the cityscape. I began the year working in steel and plaster, combining the two in works that explore the interaction between living tree roots and inanimate rocks. This led to a series entitled Landscape Recollections, comprised of welded steel forms housed in protective wooden boxes and lit from inside. After visiting New York City, architecture began to playa role in my work, as seen in the two Roadcut pieces and the Cathedral Woods series. Roadcut #1 and Roadcut #2 explore the relationship between a man-made road and the landscape that lies beneath and around it. The Cathedral Woods pieces incorporate architecture in a more abstract manner, using imagery derived from Gothic cathedrals to convey a sense of quiet peacefulness. The soaring verticality of Gothic architecture integrates with the tall tree forms in each piece, enabling me to intertwine these two elements into one another and create a harmonious relationship between architecture and nature. Throughout the year I have kept a sketchbook in which I draw from life, jot down ideas, and take notes on how the project is progressing. I have also completed several large charcoal drawings of my sculptures in which I explore different ways of viewing the steel forms. I am grateful to have had the opportunity to undertake this project, as it has been a very difficult but rewarding process of observing, interpreting, and manifesting the landscape according to my personal vision and experiences.

Equidade e descentralização: os mitos do SUS

O Sistema Único de Saúde (SUS) foi configurado para ser um instrumento de justiça social, utilizando a estratégia de descentralização político-administrativa, com vistas à equidade, universalização e integridade das ações de saúde. No entanto, após oito anos de aprovação e legitimação constitucional, o seu processo de implantação tem sofrido desvios na sua trajetória idealizada pela Reforma Sanitária. Nesta dissertação serão enfocadas as possíveis causas dos obstáculos desencaminhadores do SUS. Pontualizando duas questões conceituais: a equidade e a descentralização dos serviços de saúde. A grande interrogação que permeia todo o trabalho está no questionamento sobre a factibilidade do SUS, enquanto um modelo teórico, realizado em moldes utópicos, passível de transformar-se em mais um mito do imaginário social brasileiro, do que uma efetiva política social, voltada para a obtenção de uma sociedade democrática e participativa.

Percepção do mercado contratante sobre os pós-graduados com título de MBA

A cada dia aumentam os requerimentos por mão-de-obra especializada na área de gestão. Em decorrência deste aumento de demanda, o mercado também passa a requerer mais, desta mão-de-obra que é insumo dos resultados empresariais. Isto impõe que as instituições de ensino estejam muito alinhadas com o mercado, visando apresentar ofertas que atendam na plenitude os novos requerimentos destas organizações. O objetivo deste trabalho foi levantar a percepção dos contratantes empresariais, observando quais fatores estes contratantes consideram relevantes no momento da contratação de candidatos pósgraduados com título de MBA. Buscou-se tomar como referência o quanto, determinadas características associadas à formação do profissional imputam maior peso, ou não, no processo seletivo, sempre assumindo a premissa de que o MBA é um componente relevante no processo decisório para as contratações em discussão. O trabalho foi realizado com a utilização de uma pesquisa qualitativa, a partir de entrevistas em profundidade realizadas com contratantes de empresas médias e grandes nas cidades do Rio de Janeiro e São Paulo. Os resultados observados permitiram elencar categorias como o conhecimento técnico, experiência profissional, fator diferencial, habilidade na tomada de decisão, flexibilidade, liderança, trabalho em equipe, comunicação e relacionamento interpessoal, capacidade de aprendizado e desenvolvimento pessoal. Pelo aspecto da instituição, a marca do MBA também mostrou ter relevância. O estudo também aponta a percepção negativa, gerada pela competição excessiva, a despeito da preservação dos parâmetros de qualidade da oferta, gerando a perda de prestígio da instituição junto a estes contratantes. Finalmente o trabalho lança insights sobre o tema, e pode servir de base para desdobramentos e novas pesquisas.

Testing the optimality of aggregate consumption decisions: is there rule-of-thumb behavior?

Consumption is an important macroeconomic aggregate, being about 70% of GNP. Finding sub-optimal behavior in consumption decisions casts a serious doubt on whether optimizing behavior is applicable on an economy-wide scale, which, in turn, challenge whether it is applicable at all. This paper has several contributions to the literature on consumption optimality. First, we provide a new result on the basic rule-of-thumb regression, showing that it is observational equivalent to the one obtained in a well known optimizing real-business-cycle model. Second, for rule-of-thumb tests based on the Asset-Pricing Equation, we show that the omission of the higher-order term in the log-linear approximation yields inconsistent estimates when lagged observables are used as instruments. However, these are exactly the instruments that have been traditionally used in this literature. Third, we show that nonlinear estimation of a system of N Asset-Pricing Equations can be done efficiently even if the number of asset returns (N) is high vis-a-vis the number of time-series observations (T). We argue that efficiency can be restored by aggregating returns into a single measure that fully captures intertemporal substitution. Indeed, we show that there is no reason why return aggregation cannot be performed in the nonlinear setting of the Pricing Equation, since the latter is a linear function of individual returns. This forms the basis of a new test of rule-of-thumb behavior, which can be viewed as testing for the importance of rule-of-thumb consumers when the optimizing agent holds an equally-weighted portfolio or a weighted portfolio of traded assets. Using our setup, we find no signs of either rule-of-thumb behavior for U.S. consumers or of habit-formation in consumption decisions in econometric tests. Indeed, we show that the simple representative agent model with a CRRA utility is able to explain the time series data on consumption and aggregate returns. There, the intertemporal discount factor is significant and ranges from 0.956 to 0.969 while the relative risk-aversion coefficient is precisely estimated ranging from 0.829 to 1.126. There is no evidence of rejection in over-identifying-restriction tests.

Níveis de julgamento de alunos de 1., 2. e 3. graus de ensino

Os níveis de julgamen to dos alunos de 1 2 , 22 e ,:3 2 graus de ensino da Rede de E'sco las Particulares e da ~~ndação Universitária da cidade de Lages - Santa Catari ~a -, é um estudo teórico e de investigação prática, que -pretende verificar e discutir as relações entre a quali~ . dade ou maturidade de julgamento .. ' . e as var~ave~s idade grau de escolaridade, capacidade intelectual e nível só- --ci.o-econômico dos alunos ,sujeitos da pesquisa. A amostra foi sorteada aleatoriamente entre to- dos os alunos da 8! série do 12 grau, 2~' série do 29 grau e 3! série do 3 2 grau, num percentual aproximado de 20% da população total visada. Constituiu-se, assim, uma amos tra de 152 sujeitos, extTa{da de uma população de 898 a~ . . lunos. Os objetivos específicos que orientaram o estu- , ." ... . .' ,.., . do resumem-se na anal~se e discussao das relaçoes entreo nível de julgamento e as demais variáveis, isto é, ida~ de, grau de escolaridade, capacidade intelectual e nível sócio-econômico dos ,alunos pesquisados. Os resultados indicam que: 1) a maioria absolu- , ta dos sujeitos tanto de 12 e 22 graus qcinnto os de .j2 grau não alcançou'os níveis de julgamento mais maduros - ou seja - julgamento imaginativo-explicativo e imaginati vo-explicati vo-compreensi vo.· .2) Os sujei tos revelam -a- centuada dificuldade de raciocínio e julgamento' em ,rela ção ao texto-teste de estrutura lógica. 3) As variáveis' ~dade, grau de escolaridade, nível 56cio~ecortômico rela- ',c~onam-se,. em geral, positivamente com o nível de julga- ~mento, embora, no caso desta pesquisa, essa relação seja :fraca, possivelmente em função da pou.ca dispersão ougra!! de homog'eneic.ade' dos escores obtidos pelos sujeitos. Es- -sa homogeneidade de resultados levanta problemas que me- receriam novos estudos para maiores esclarecimentos sobre as condiç;es de desenvolvimento do processo de julga- mento, sejam internas ou externas à escola. são levantadas questões relativas, principalmen- te, à ação da escola, aos livros textos nela utilizados às condições precárias dos professores, à concepção tradi ciônal de educação e sobre o sistema ou contexto social a tual dentro do qual a escola é um sub-sistema. são sugeridas, no final do trabalho, pesquisas e estudos que visem amplioar o c onhecimento a raspei to do d~ senvolvimento do processo de julgar, bem como, pesquisas que procurem relacionar o nível sócio-econômico do profes sor e a quantidade e qualidade de leituras feitas por ele com o desempenho dos alunos.

Estudo sobre a influência do massará no processo de formação de salitre em rebocos na região de Teresina - PI

This work had to verify the influence of massará, while mortar component, in the process of formation of saltpeter in cementitious plaster walls of buildings. The massará is a ceramic material, texture areno usually found in large volumes argillaceous sediments in Teresina, Piaui State capital, which is associated with the Portland cement mortar form for fixing and finishing in construction. Saltpeter or flowering is a pathology that happens in gypsum wallboard, which invariably reaction between soluble salts present in materials, water and oxygen. This pathology, supposedly credited to massará caused its use to suffer significant reduction in the market of the buildings. Verify this situation with particular scientific rigor is part of the proposal of this work. Grading tests Were performed, consistency limits (LL, LP and IP), determination of potential hydrogen, capacity Exchange (CTC), electrical conductivity (EC), x-ray fluorescence (FRX) and x-ray diffraction (DRX). Massará analysed samples in number six, including sample plastering salitrado presented potential hydrogen medium 5.7 in water and 5.2 on KCl n and electrical conductivity (EC), equal to zero. These results pointed to the affirmative that massará is a material that does not provide salinity content that can be taken into consideration. It is therefore concluded that the material analyzed not competing, at least with respect to the presence of soluble salts, for the formation of saltpeter

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Análise comparativa entre as propriedades do gesso obtido de rejeito da produção de sal e gesso comerciais

The environmental impacts, caused by the solid residues generation, are an often quoted concern nowadays. Some of these residues, which are originated from different human activities, can be fully reused, reducing the effects of the poor waste management on the environment. During the salt production process, the first formed crystals are discarded as industrial waste. This is mainly made of gypsum that is a calcium sulfate dihydrate (CaSO4.2H2O). The gypsum in question may go through a calcination process due to the plaster (CaSO4.0,5H2O) production and then the application on the cement industry. Considering the necessity of development and application for these industrial wastes, this paper aims to analyze the plaster, called Salgesso, from the gypsum that was generated during the salt production, and its use viability on the civil construction industry in order to create environmental and economical benefits. For characterization, the following experiments were performed: X-ray Fluorescence (XRF), X-ray Diffraction (XRD), thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM) with EDS. The following tests were also performed to obtain the mechanical characteristics: Thinness Modulus, Unit Mass, Setting Time and Compressive Resistance. Three commercial plasters used on civil construction were taken as references. All of these tests were performed according to the current standards. It was noticed that although there were some conflicting findings between the salt and commercial plasters in all of the studied properties, the Salgesso has its values within the standard limits. However, there is the possibility to improve them by doing a more effective calcination process. Three commercial plasters, used in construction, were used as reference material. All tests were performed according to standards in force. It was observed that although some tests present conflicting findings between the salt and gypsum plasters commercial properties in all of the studied Salgesso have values within the limits imposed by the standard, but can be improved simply by calcination process more effective

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Alternativas de ultimação de resíduo plástico termofixo

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Segmentos anátomo-cirúrgicos arteriais do rim de cutia (Dasyprocta prymnolopha)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Vertical distribution of benthic invertebrate larvae during an upwelling event along a transect off the tropical Brazilian continental margin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O tratamento ortodôntico em uma perspectiva a longo prazo: avaliação da estabilidade oclusal e do grau de satisfação dos pacientes

This study aimed to evaluate factors associated to orthodontic treatment stability and patient satisfaction in the long-term. A total of 209 patients (88 class I and 121 class II) treated with straight wire fixed appliance were selected at least 5 years post treatment. Six hundred twenty seven dental casts were examined with the PAR Index at pretreatment (T1), end of treatment (T2), and at long-term follow up (T3, mean 8.5 years post treatment). At T3, a Dental Impact on Daily Living questionnaire was used to assess patient satisfaction with the dentition in the long-term. Friedman test and multiple regression analysis were used to evaluate changes among the time points and factors associated with stability and patient satisfaction. Predictive factors used to exam the occlusion were: PAR Index at T1 and T2, age at T1, the amount of time without retainer, length of Hawley retainer wear, length of follow-up, sex, extraction and third molar status. To assess patient satisfaction were considered: changes produced by the orthodontic treatment (PAR T2-T1), post treatment stability (PAR T3), age at the start of treatment (T1), length of treatment (T2-T1), gender, and extraction. Orthodontic treatment produced a significant improvement of 94.2% in the PAR Index (T2-T1), but this change was not associated with the level of satisfaction when the patient was questioned at T3. No significant change was observed between T2 and T3. However, when the sample was divided according to the level of finalization (PAR T2), it was observed that well-finished patients experienced some deterioration (P<.001), whereas the less well-finished ones showed some improvement (P<.05). Even with the deterioration, the well-finished patients still had a better PAR Index at T3 compared to the less well-finished ones (PAR T2- T3). Regression analysis showed that PAR Index at T1 and T2, age at T1, and length of retainer wear had a slight association with occlusal stability (R2 = 0.27). Patient satisfaction was significantly associated only with PAR Index at T3 (r2=0.125, P<.0001). We can conclude that, even thought orthodontic treatment is quite stable, not so well-finished treatments tend to show some improvement and well-finished ones deteriorate some in the long-term. Despite of that, well-finished patients still have better occlusal characteristics. Patient satisfaction is not related to the result of orthodontic treatment; nevertheless, there is a slight association with dentition in the long-term