Tunkeuman hallinta MIG/MAG-hitsauksessa

MIG/MAG-hitsaukselle tyypillinen ominaispiirre, valokaaren itsesäätyvyys, saavutetaan vakiojännitelähdettä käyttämällä. Valokaaren sisäisen säätömekanismin ansiosta kaarenpituus pysyy vakiona, vaikka hitsauspolttimen ja työkappaleen välinen etäisyys vaihtelisi hitsauksen aikana. Vakiojännitelähteen käyttäminen aiheuttaa kuitenkin kaaritehon vaihtelua vapaalankapituuden muuttuessa. Vapaalangan kasvaessa liian pitkäksi kaariteho laskee niin alas, ettei se enää riitä sulattamaan tarpeeksi perusainetta railon kyljissä. Tämän seurauksena hitsausliitokseen syntyy erilaisia liittymävirheitä. Käsinhitsauksessa vapaalangan pituus saattaa polttimen epävakaasta kuljetuksesta johtuen vaihdella erityisesti kokemattomilla hitsaajilla. Mekanisoidussa ja automatisoidussa hitsauksessa railojen mitta- ja muotopoikkeamat aiheuttavat vapaalankapituuden vaihtelua. Poikkeamia syntyy kaikissa hitsausrailojen esivalmistusvaiheissa. Lisäksi lämmöntuonnin aiheuttamat muodonmuutokset kappaleissa lisäävät poikkeamia railonsovituksessa hitsauksen aikana. Ongelma on useimmiten ratkaistavissa railonseurantaa käyttämällä. Railonseurantajärjestelmät ovat kuitenkin kalliita, eivätkä ne toimi luotettavasti kaikissa olosuhteissa. Diplomityössä tutkittiin uutta MIG/MAG-hitsauksen reaaliaikaiseen tunkeuman hallintaan kehitettyä säätöjärjestelmää. Työn tavoitteina olivat säätöjärjestelmän luotettavan toiminnan takaavien reunaehtojen ja kosketussuutinetäisyyden suositusrajojen määrittäminen. Tavoitteiden täyttämiseksi työn kokeellisessa osiossa suoritettiin laaja hitsauskokeiden sarja, jossa hitsattavina materiaaleina käytettiin seostamatonta ja runsasseosteista terästä.

La "imatge" de la caverna i la temptació constant de corregir Plató: Benjamin Jowett com a exemple

[cat] Les traduccions dels primers capítols del llibre VII de la República de Plató on apareix la famosa imatge de la caverna, εἰκών, presenten una sorprenent i intrigant varietat interpretativa: “al·legoria”, “mite”, “faula”, “paràbola”, “símil”, “comparació”... Aquest article, prenent com a exemple la notable fidelitat al text del traductor victorià de Plató, B. Jowett, i mitjançant una anàlisi rigorosa dels termes que acompanyen la imatge, manté la necessitat de no interpretar ni corregir en aquest cas el gran filòsof idealista o “ideocèntric”, assenyalant alhora, si el capteniment filològic és un altre, les contradiccions resultants i l’ús d’algun terme aliè al lèxic platònic com ara “al·legoria”.

Argument omissions in preschool Catalan and Spanish speaking children with SLI

El presente artículo describe tres estudios sobre la producción del verbo y la estructura argumental en niños con Trastorno Específico del Lenguaje (TEL) usando diferentes metodologías. El primero es un estudio observacional que usa una muestra de habla espontánea. El segundo usa una tarea experimental de denominación de oraciones como resultado de la observación de videos de acciones. El tercero comprende la tarea de denominación de oraciones con imágenes estáticas en eventos con diferente complejidad argumental. Aunque los datos concretos varían en función de la metodología usada, hay una clara evidencia de que los niños de habla catalana y española con TEL presentan especiales dificultades en la producción de verbos con una alta complejidad en relación a la estructura argumental y cometen errores en la especificación de los argumentos obligatorios. Se concluye quetanto limitaciones en el procesamiento como déficits en la representación semántica de los verbos pueden estar implicados en estas dificultades

Nietzsche and transcendental argument

My plan is to examine Nietzsche's view of (what is I think) the most characteristically Kantian kind of argument, what's now often called 'transcendental argument'. I understand this as an argument in which a concept or principle or value is justified as a 'condition of the possibility' of something indisputable (or indispensable). I will look at Nietzsche's critique of this pattern of argument in Kant, but also at the ways he still uses such arguments himself, in all three of the sectors of Kant's critique: theoretical, practical, aesthetic.

Protective effect of maternal prenatal melatonin administration on rat pups born to mothers submitted to constant light during gestation

We studied the effects of adverse conditions such as constant light (LL) on the circadian rhythm of malate (MDH, EC 1.1.1.37) and lactate (LDH, EC 1.1.1.27) dehydrogenase activities of the testes of male Wistar rats on postnatal day 28 (PN28), anxiety-like behavior (elevated plus-maze test) at PN60 and sexual behavior at PN120. The rats were assigned to mother groups on day 10 of pregnancy: control (12-h light/dark), LL (light from day 10 to 21 of pregnancy), and LL+Mel (LL and sc injection to the mothers of a daily dose of melatonin, 1 mg/kg body weight at circadian time 12, from day 17 to 21 of pregnancy). LL offspring did not show circadian rhythms of MDH (N = 62) and LDH (N = 63) activities (cosinor and ANOVA-LSD Fisher). They presented a 44.7% decrease in open-arm entries and a 67.9% decrease in time (plus-maze test, N = 15, P < 0.001, Mann-Whitney U-test and Kruskal-Wallis test), an increase in mounting (94.4%), intromission (94.5%) and ejaculation (56.6%) latencies (N = 12, P < 0.01, Mann-Whitney U-test and Kruskal-Wallis test) and lower numbers of these events (61, 59 and 73%, respectively; P < 0.01, N = 12) compared to controls. The offspring of the LL+Mel group presented MDH and LDH circadian rhythms (P < 0.05, N = 50, cosinor and ANOVA-LSD Fisher), anxiety-like and sexual behaviors similar to control. These findings supported the importance of the melatonin signal and provide evidence for the protective effects of hormones on maternal programming during gestation. This protective action of melatonin is probably related to its entrainment capacity, favoring internal coupling of the fetal multioscillatory system.

Dynamics of chest wall volume regulation during constant work rate exercise in patients with chronic obstructive pulmonary disease

This study evaluated the dynamic behavior of total and compartmental chest wall volumes [(V CW) = rib cage (V RC) + abdomen (V AB)] as measured breath-by-breath by optoelectronic plethysmography during constant-load exercise in patients with stable chronic obstructive pulmonary disease. Thirty males (GOLD stages II-III) underwent a cardiopulmonary exercise test to the limit of tolerance (Tlim) at 75% of peak work rate on an electronically braked cycle ergometer. Exercise-induced dynamic hyperinflation was considered to be present when end-expiratory (EE) V CW increased in relation to resting values. There was a noticeable heterogeneity in the patterns of V CW regulation as EEV CW increased non-linearly in 17/30 "hyperinflators" and decreased in 13/30 "non-hyperinflators" (P < 0.05). EEV AB decreased slightly in 8 of the "hyperinflators", thereby reducing and slowing the rate of increase in end-inspiratory (EI) V CW (P < 0.05). In contrast, decreases in EEV CW in the "non-hyperinflators" were due to the combination of stable EEV RC with marked reductions in EEV AB. These patients showed lower EIV CW and end-exercise dyspnea scores but longer Tlim than their counterparts (P < 0.05). Dyspnea increased and Tlim decreased non-linearly with a faster rate of increase in EIV CW regardless of the presence or absence of dynamic hyperinflation (P < 0.001). However, no significant between-group differences were observed in metabolic, pulmonary gas exchange and cardiovascular responses to exercise. Chest wall volumes are continuously regulated during exercise in order to postpone (or even avoid) their migration to higher operating volumes in patients with COPD, a dynamic process that is strongly dependent on the behavior of the abdominal compartment.

On site measurements of DC link electrolytic capacitor bank of frequency converter using constant DC magnetization of the motor

Preventive maintenance of frequency converters has been based on pre-planned replace-ment of wearing or ageing components. Exchange intervals follow component life-time expectations which are based on empirical knowledge or schedules defined by manufac-turer. However, the lifetime of a component can vary significantly, because drives are used in very different operating environments and applications. The main objective of the research was to provide information on methods, i.e. how in-verter's operating condition can be measured reliably under field conditions. At first, the research focused on critical components such as current transducers, IGBTs and DC link capacitor bank, because these aging have already been identified. Of these, the DC link capacitor measurement method was selected for closer examination. With this method, the total capacitance and its total series resistance can be measured. The suitability of the measuring procedure was estimated on the basis of practical measurements. The research was made by using so called triangulation method, including a literature review, simulations and practical measurements. Based on the results, the new measu-rement method seems suitable with some reservations to practical measurements. How-ever, the measuring method should be further developed in order to improve its reliability.