Ground and Excited State Electron Transfer Reaction Between a few Anthracene Appended Tertiary Amines and Suitable Electron Acceptors

the thesis entitled “Ground and Excited State Electron Transfer Reaction Between a few Anthracene Appended Tertiary Amines and Suitable Electron Acceptors” portrays our attempts to explore the solvent, concentration and temperature effect of the reaction between a few (anthracen-9- yl)methanamines with electron acceptors like DMAD, DBA and DBE. We have also studied the effect of solvent and percentage fluorescence quenching in the photoinduced electron transfer reactions of these ‘donor-spacer-acceptor’ systems. Finally we look in to the intramolecular electron transfer reactions of a few tertiary amine appended dibenzobarrelenes and bisdibenzobarrelenes

Femtosecond probing of sodium cluster ion Na_n ^+ fragmentation

We report on the first femtosecond time-resolved experiments in cluster physics. The photofragmentation dynamics of small sodium cluster ions Na_n ^+ have been studied with pump-probe techniques. Ultrashort laser pulses of 60-fs duration are employed to photoionize the sodium clusters and to probe the photofragments. We find that the ejection of neutral dimer Na_2 and, observed for the first time, neutral trimer Na_3 photofragments occur on ultrashort time scales of 2.5 and 0.4 ps, respectively. This and the absence of cluster heating reveals that direct photoinduced fragmentation processes are important at short times rather than the statistical unimolecular decay.

Theory of laser-induced ultrafast structural changes in solids

The present thesis is a contribution to the study of laser-solid interaction. Despite the numerous applications resulting from the recent use of laser technology, there is still a lack of satisfactory answers to theoretical questions regarding the mechanism leading to the structural changes induced by femtosecond lasers in materials. We provide here theoretical approaches for the description of the structural response of different solids (cerium, samarium sulfide, bismuth and germanium) to femtosecond laser excitation. Particular interest is given to the description of the effects of the laser pulse on the electronic systems and changes of the potential energy surface for the ions. Although the general approach of laser-excited solids remains the same, the potential energy surface which drives the structural changes is calculated with different theoretical models for each material. This is due to the difference of the electronic properties of the studied systems. We use the Falicov model combined with an hydrodynamic method to study photoinduced phase changes in cerium. The local density approximation (LDA) together with the Hubbard-type Hamiltonian (LDA+U) in the framework of density functional theory (DFT) is used to describe the structural properties of samarium sulfide. We parametrize the time-dependent potential energy surface (calculated using DFT+ LDA) of bismuth on which we perform quantum dynamical simulations to study the experimentally observed amplitude collapse and revival of coherent $A_{1g}$ phonons. On the basis of a time-dependent potential energy surface calculated from a non-orthogonal tight binding Hamiltonian, we perform molecular dynamics simulation to analyze the time evolution (coherent phonons, ultrafast nonthermal melting) of germanium under laser excitation. The thermodynamic equilibrium properties of germanium are also reported. With the obtained results we are able to give many clarifications and interpretations of experimental results and also make predictions.

Revaloració de la fracció cel·lular de la sang de porc procedent d'escorxadors industrials

La sang de porc és un subproducte comestible que es genera als escorxadors industrials durant el procés d'obtenció de la canal. Aquest subproducte es caracteritza per presentar una elevada càrrega contaminant i, degut a l'elevat volum que es genera, és necessari trobar estratègies que permetin la seva revaloració i aprofitament, a la vegada que disminuïm la contaminació ambiental i les despeses que es deriven del seu processament abans de l'abocament. La fracció cel·lular (FC) constitueix el 40 % de la sang de porc i conté principalment l'hemoglobina (Hb), que representa al voltant del 90 % del contingut en proteïna d'aquesta fracció (un 35 % aproximadament). L'elevat percentatge en proteïna i en ferro, i les seves bones propietats funcionals fan que l'aprofitament d'aquest subproducte com a primera matèria o ingredient de la indústria alimentària sigui una alternativa molt útil a l'hora de reduir les despeses de la indústria càrnia, sempre que es resolguin els problemes de l'enfosquiment i dels sabors estranys que pot conferir la FC quan s'addiciona a productes alimentaris. Una altra possible utilització de la FC és aprofitar les propietats colorants de l'Hb o del grup hemo, com a colorant d'origen natural en diversos productes alimentaris. Els objectius del present treball eren, en primer lloc, determinar les millors condicions d'aplicació del procés de conservació de la FC mitjançant la deshidratació per atomització i caracteritzar físico-químicament i microbiològica el concentrat d'Hb en pols. En segon lloc, avaluar l'eficàcia de diferents additius antioxidants i/o segrestants del ferro per prevenir l'enfosquiment que pateix la FC durant la deshidratació. En tercer lloc, aplicar tractaments d'altes pressions hidrostàtiques com a procés d'higienització i avaluar els efectes d'aquest tractament sobre la microbiota contaminant, el color i les propietats funcionals de la FC. Finalment, desenvolupar un procés d'obtenció d'hidrolitzats proteics descolorats a partir de l'Hb amb la finalitat d'utilitzar-los com a ingredients nutricionals i/o funcionals. La millor temperatura de deshidratació per atomització de la FC hemolitzada era 140ºC. La FC en pols presentava un contingut en humitat del 5,3 % i un percentatge de solubilitat proteica del 96 %. La deshidratació per atomització induïa canvis en l'estructura nativa de l'Hb i, per tant, un cert grau de desnaturalització que pot conduir a una disminució de les seves propietats funcionals. L'extracte sec de la FC en pols estava composat per un 94,6 % de proteïna, un 3 % de sals minerals i un 0,7 % de greix. Els valors CIE L*a*b* del color de la FC en pols eren força constants i reflectien el color vermell marró fosc d'aquesta, a causa de l'oxidació del ferro hèmic que es produeix durant la deshidratació. La càrrega contaminant de la FC fresca de la sang de porc era força elevada i el tractament d'hemòlisi amb ultrasons i la centrifugació posterior no produïen una reducció significativa de la microbiota contaminant, obtenint un producte amb uns recomptes microbiològics de l'ordre de 106 ufc·mL-1. La deshidratació per atomització produïa una disminució d'una unitat logarítmica dels recomptes totals de la FC hemolitzada. Tanmateix, el producte en pols encara reflectia l'elevada contaminació de la primera matèria, fet que condiciona negativament la seva utilització com a ingredient alimentari, a no ser que es millorin les condicions de recollida de la sang a l'escorxador o que aquesta o la FC es sotmeti a algun tractament d'higienització prèviament a la deshidratació. Les isotermes de sorció a 20ºC de la FC en pols tenien forma sigmoïdal i una histèresi estreta i llarga. L'equació GAB és un bon model matemàtic per ajustar les dades de sorció obtingudes experimentalment i determinar la isoterma d'adsorció de la FC deshidratada per atomització. El percentatge d'humitat de la FC deshidratada a 140ºC es corresponia a un valor d'aw a 20 ºC d'aproximadament el 0,16. Tenint en compte que estava per sota dels valors d'aw corresponents a la capa monomolecular, es pot garantir la conservació a temperatura ambient del producte, sempre que s'envasi en recipients tancats que no permetin l'entrada d'humitat de l'exterior. De l'estudi de la possible estabilització del color de la FC deshidratada per atomització mitjançant l'addició d'antioxidants i/o segrestants de ferro, es va observar que només l'àcid ascòrbic, la glucosa, l'àcid nicotínic i la nicotinamida, tenien efectes positius sobre el color del producte en pols. L'ascòrbic i la glucosa no milloraven la conservació del color de l'Hb però disminuïen l'enfosquiment que es produeix durant la deshidratació, amb la qual cosa es pot obtenir un producte en pols de color marró més clar. L'addició de dextrina o L-cisteïna no disminuïa l'enfosquiment ni evitava el canvi de color de l'Hb. L'àcid nicotínic i la nicotinamida protegien el color de l'Hb durant el procés de deshidratació i l'emmagatzematge de la FC en pols. Les millors condicions d'aplicació del tractament amb altes pressions hidrostàtiques (HHP) sobre la FC eren 400 MPa, a 20ºC, durant 15 minuts, perquè produïen una millora significativa de la qualitat microbiològica, no afectaven negativament al color, no comprometien gaire la solubilitat proteica l'Hb i, malgrat que produïen un augment de la viscositat, la FC romania fluida després del tractament. Aquest tractament permetia una reducció de la microbiota contaminant de la FC d'entre 2 i 3 unitats logarítmiques. L'aplicació de l'alta pressió i la posterior deshidratació per atomització permetien obtenir un producte en pols amb recomptes totals de l'ordre de 2,8 unitats logarítmiques. El color de la FC pressuritzada en pols era igual que el de la FC control deshidratada, perquè ambdues mostres presentaven la mateixa susceptibilitat a l'oxidació del grup hemo produïda per la deshidratació. L'alta pressió incrementava la susceptibilitat de l'Hb als efectes desnaturalitzants de la deshidratació, fonamentalment a pH 7 (PIE), ja que es va observar una disminució de la solubilitat proteica a pH neutre després dels 2 processos tecnològics. La FC en pols presentava una màxima capacitat escumant al PIE de l'Hb. L'aplicació del tractament HHP produïa una disminució de la capacitat escumant de la FC en pols, però no tenia efectes negatius sobre l'estabilitat de l'escuma formada. Tampoc es van observar efectes negatius del tractament HHP sobre l'activitat emulsionant de l'Hb. La màxima activitat emulsionant de l'Hb s'aconseguia amb una concentració de FC en pols de l'1,5 % a pH 7 i de l'1 % a pH 4,5. Les pastes obtingudes per escalfament de la FC presentaven característiques molt diferenciades depenent del pH. A pH neutre es formaven unes pastes dures i consistents, mentre que a pH àcid les pastes eren poc consistents, molt adhesives i més elàstiques que les anteriors. Aquestes tenien una capacitat de retenció d'aigua molt superior que les de pH 7, en les quals l'aigua quedava retinguda per capil·laritat. La textura i capacitat de retenció d'aigua de les pastes tampoc eren afectades pel tractament HHP. El tractament HHP incrementava l'activitat de la Tripsina sobre l'Hb quan el substrat i l'enzim es tractaven conjuntament i afavoria el procés d'obtenció d'hidrolitzats descolorats a partir de la FC, la qual cosa permetia assolir el mateix grau de descoloració amb una dosi d'enzim inferior. El tractament d'hidròlisi de la FC amb la utilització combinada de Tripsina seguida d'un tractament amb Pepsina permetia l'obtenció d'un hidrolitzat proteic d'Hb descolorat i hidrolitzava completament la globina, donant lloc a 2 pèptids de 10,8 i 7,4 KDa. Val a dir que també produïa un 60 80 % de nitrogen soluble en TCA, constituït fonamentalment per pèptids petits i aminoàcids lliures. Els hidrolitzats trípsics i pèpsics d'Hb, obtinguts a partir de FC no pressuritzada i deshidratats per atomització a 180ºC, eren de color blanc i tenien un contingut en humitat del 4,7 %, un 84,2 % de proteïna i 9,7 % de sals minerals. El procés d'hidròlisi permetia una reducció considerable de la contaminació de la FC, obtenint un producte en pols amb uns recomptes totals de l'ordre de 102-103 ufc·g-1. Pel que fa a la funcionalitat dels hidrolitzats d'Hb deshidratats per atomització, aquests presentaven una elevada solubilitat proteica a pH 5 i 7 i romanien solubles després d'un escalfament a 80ºC durant 30 min. Tanmateix, aquesta hidròlisi afectava molt negativament la capacitat de mantenir escumes estables i l'activitat emulsionant.

Surface modification of nylon 6,6 using a carbene insertion approach

The diazirine functionalised fluorenone, 3-[3-(trifluoromethyl)diazirin-3-yl]phenyl-9-oxo-9H-fluorene-2-carboxyla te was synthesised to act as a model compound capable of modifying a wide variety of polymeric substrates. Photochemical activation of the diazirine moiety of the fluorenone derivative was utilised to afford highly reactive carbenes capable of insertion into or addition to a wide variety of functionalities. In this paper the photoinduced attachment of a fluorenone derivative to nylon 6,6 has been studied using UV-visible spectroscopic analysis. Incorporation of the fluorenone chromophore onto the backbone of nylon at different loading levels and after different coating cycles has been investigated and is detailed in this paper.

Redox control of light-induced charge separation in a transition metal cluster: photochemistry of a methyl viologen-substituted [Os-3(CO)10(a-diimine)] cluster

Sub)picosecond transient absorption (TA) and time-resolved infrared (TRIR) spectra of the cluster [OS3(CO)(10-) (AcPy-MV)](2+) (the clication AcPy-MV = Acpy-MV2+ = [2-pyridylacetimine-N-(2-(1'-methyl-4,4'-bipyridine-1,1'-diium-1-yl) ethyl)] (PF6)(2)) (1(2+)) reveal that photoinduced electron transfer to the electron-accepting 4,4'-bipyridine-1,1'diium (MV2+) moiety competes with the fast relaxation of the initially populated sigmapi* excited state of the cluster to the ground state and/or cleavage of an Os-Os bond. The TA spectra of cluster 12 in acetone, obtained by irradiation into its lowest-energy absorption band, show the characteristic absorptions of the one-electron-reduced MV*(+) unit at 400 and 615 nm, in accordance with population of a charge-separated (CS) state in which a cluster-core electron has been transferred to the lowest pi* orbital of the remote MV2+ unit. This assignment is confirmed by picosecond TRIR spectra that show a large shift of the pilot highest-frequency nu(CO) band of 1(2+) by ca. +40 cm(-1), reflecting the photooxidation of the cluster core. The CS state is populated via fast (4.2 x 10(11) s(-1)) and efficient (88%) oxidative quenching of the optically populated sigmapi* excited state and decays biexponentially with lifetimes of 38 and 166 ps (1:2:1 ratio) with a complete regeneration of the parent cluster. About 12% of the cluster molecules in the sigmapi* excited state form long-lived open-core biradicals. In strongly coordinating acetonitrile, however, the cluster core-to-MV2+ electron transfer in cluster 12+ results in the irreversible formation of secondary photoproducts with a photooxidized cluster core. The photochemical behavior of the [Os-3(CO)(10)(alpha-diimine-MV)](2+) (donor-acceptor) dyad can be controlled by an externally applied electronic bias. Electrochemical one-electron reduction of the MV2+ moiety prior to the irradiation reduces its electron-accepting character to such an extent that the photoinduced electron transfer to MV*+ is no longer feasible. Instead, the irradiation of reduced cluster 1(.)+ results in the reversible formation of an open-core zwitterion, the ultimate photoproduct also observed upon irradiation of related nonsubstituted clusters [Os-3(CO)(10)(alpha-diimine)] in strongly coordinating solvents such as acetonitrile.

An unexpected photoadduct of N-carbomethoxymethylpyrrolidine with a chiral butenolide and benzophenone: X-ray structure and synthetic utility

The regio- and stereoselective photoinduced addition of N-carbomethoxymethylpyrrolidine to 5(S)-tert-butyldimethylsiloxymethyl-furan-2(5H)-one in the presence of benzophenone yields 3(R)-[N-(diphenylhydroxymethyl)carbo methoxymethylpyrrolidin-2′-yl]-4(S)-tert-butyldimethylsiloxymethyl)-butan-4-olides (epimeric at C-2′), and we report the X-ray structure of the major adduct together with its conversion into the 1-azabicyclo[4.3.0]-nonane ring system.

Local gratings due to angular hole burning in a photorefractive polymer

We investigate the processes involved in writing real-time holographic gratings in a photorefractive polymer (PRP) that incorporates an azo-dye. In such systems there may be gratings due to mechanisms associated with trans–cis isomerization (angular hole burning (AHB) and/or angular redistribution), which appear in addition to those arising from the photorefractive (PR) effect. The work presented here helps to understand the interactions which may occur between these different gratings. The formation of local gratings due to mechanisms associated with photoisomerization is studied, in a new PRP based on the photoconductor poly(N-vinylcarbazole):2, 4, 7-trinitro-9-fluorenone, plasticized with N-ethylcarbazole. The polymer includes the azo-dye 4-nitro-4'-pentyloxy-azobenzene and we observe both PR and photoisomerization gratings. The gratings are shown to be both polarization-sensitive and reversible. The presence of the photoisomerization gratings (which diffract almost as strongly as the PR gratings) significantly affects the field-dependent diffractive behaviour of the composite. A measurement of the lifetime of the cis state is made (τcis = 38 s) using photoinduced dichroism. This is close to the decay time constant of the local gratings (τdecay = 42 s), and it is suggested that the local grating mechanism is AHB of the azo-dye. This is the first time (to the knowledge of the authors) that a local grating due to AHB has been demonstrated in a PRP.

Monitoring one-electron photo-oxidation of guanine in DNA crystals using ultrafast infrared spectroscopy

To understand the molecular origins of diseases caused by ultraviolet and visible light, and also to develop photodynamic therapy, it is important to resolve the mechanism of photoinduced DNA damage. Damage to DNA bound to a photosensitizer molecule frequently proceeds by one-electron photo-oxidation of guanine, but the precise dynamics of this process are sensitive to the location and the orientation of the photosensitizer, which are very difficult to define in solution. To overcome this, ultrafast time-resolved infrared (TRIR) spectroscopy was performed on photoexcited ruthenium polypyridyl–DNA crystals, the atomic structure of which was determined by X-ray crystallography. By combining the X-ray and TRIR data we are able to define both the geometry of the reaction site and the rates of individual steps in a reversible photoinduced electron-transfer process. This allows us to propose an individual guanine as the reaction site and, intriguingly, reveals that the dynamics in the crystal state are quite similar to those observed in the solvent medium.

Coordinated weather balloon solar radiation measurements during a solar eclipse

Solar eclipses provide a rapidly changing solar radiation environment. These changes can be studied using simple photodiode sensors, if the radiation reaching the sensors is unaffected by cloud.Transporting the sensors aloft using standard meteorological instrument packages modified to carry extra sensors, provides one promising but hitherto unexploited possibility for making solar eclipse radiation measurements. For the 20th March 2015 solar eclipse, a coordinated campaign of balloon-carried solar radiation measurements was undertaken from Reading (51.44N, 0.94W), Lerwick (60.15N, 1.13W) and Reykjavik (64.13N, 21.90W), straddling the path of the eclipse.The balloons reached sufficient altitude at the eclipse time for eclipse-induced variations in solar radiation and solar limb darkening to be measured above cloud. Because the sensor platforms were free to swing, techniques have been evaluated to correct the measurements for their changing orientation. In the swing-averaged technique, the mean value across a set of swings was used to approximate the radiation falling on a horizontal surface; in the swing-maximum technique, the direct beam was estimated by assuming the sensing surface becomes normal to the solar beam direction at a maximum swing. Both approaches, essentially independent,give values that agree with theoretical expectations for the eclipse-induced radiation changes.

MAGNETORESISTANCE OSCILLATIONS IN DOUBLE QUANTUM WELLS UNDER MICROWAVE IRRADIATION

We report in detail oscillatory magnetoresistance in double quantum wells under microwave irradiation. The experimental investigation contains measurements of frequency, power and temperature dependence. In theory, the observed interference oscillations are explained in terms of the influence of subband coupling on the frequency-dependent photoinduced part of the electron distribution function. Thus, the magnetoresistance shows the interference of magneto-intersubband and conventional microwave induced resistance oscillations.

Influence of ceria addition on thermal properties and local structure of bismuth germanate glasses

Bismuth germanate glasses are interesting materials due to their physical properties and their unique structural characteristics caused by the coordination changes of bismuth and germanium atoms. Glasses of the bismuth germanate system were prepared by melting/molding method and were investigated concerning their thermal and structural properties. The structural analysis of the samples was carried out by micro-Raman and Fourier transform infrared spectroscopes. It was observed that the glass structure is formed basically by GeO(4) tetrahedral units also having the formation of the GeO(6) octahedral units. BiO(2) was considered a network former by observing the presence of octahedral BiO(6) and pyramidal BiO(3) groups in the local structure of the samples. An absorption band observed at 1103 cm(-1) in the IR spectrum of the undoped glass was attributed to the Bi-O-Ge and/or Bi-O-Bi linkage vibration. The said band shifted to lower wavenumbers after the CeO(2) addition thus reflecting changes in the glass network. Cerium oxide was an efficient oxidant agent to prevent the darkening of the glasses which was probably associated to the reduction of Bi ions. However, CeO(2) was incorporated as a local network modifier in the glass structure even at concentrations of 0.2 mol%. (C) 2010 Elsevier B.V. All rights reserved.

Generation and suppression of singlet oxygen in hair by photosensitization of melanin

We have studied the spectroscopic properties of hair (white, blond, red, brown, and black) under illumination with visible light, giving special emphasis to the photoinduced generation of singlet oxygen ((1)O(2)). Irradiation of hair shafts (lambda(ex)>400 nm) changed their properties by degrading the melanin. Formation of C3 hydroperoxides in the melanin indol groups was proven by (1)H NMR. After 532-nm excitation, all hair shafts presented the characteristic (1)O(2) emission (lambda(em) = 1270 nm), whose intensity varied inversely with the melanin content. (1)O(2) lifetime was also shown to vary with hair type, being five times shorter in black hair than in blond hair, indicating the role of melanin as a (1)O(2) suppressor. Lifetime ranged from tenths of a nanosecond to a few microseconds, which is much shorter than the lifetime expected for (1)O(2) in the solvents in which the hair shafts were suspended, indicating that (1)O(2) is generated and suppressed inside the hair structure. Both eumelanin and pheomelanin were shown to produce and to suppress (1)O(2), with similar efficiencies. The higher amount of (1)O(2) generated in blond hair and its longer lifetime is compatible with the stronger damage that light exposure causes in blond hair. We propose a model to explain the formation and suppression of (1)O(2) in hair by photosensitization of melanin with visible light and the deleterious effects that an excess of visible light may cause in hair and skin. 2011 Published by Elsevier Inc.

Supramolecular assemblies of a new class of nonplanar cationic metalloporphyrins and anionic metallophthalocyanines

The heteroaggregation behavior between a new class of nonplanar cationic beta-octabrominated meso-alkylpyridinium zinc(II)-porphyrins (beta-Br(8)(ZnP)) and anionic tetrasulfonated metallophthalocyanines (MTSPc, M = Ni(II) and Cu(II)) has been studied by UV-Vis electronic spectroscopy, in dimethylsulfoxide (DMSO) solution. The heteroaggregate stoichiometry and the association constants were determined by means of Job plots. Dimers and unexpected trimers, taking into account the existence of axially coordinated DMSO molecules to the central metal in both beta-Br(8)(ZnP) and MTSPc complexes, are formed in solution. The spectroscopic properties of the heteroaggregates are markedly different from those observed in the correspondent planar cationic derivatives, the heteroaggregates showing major changes predominantly in the beta-Br(8)(ZnP) Soret band region and minor effects in the MTSPc Q bands. The observed changes in the Soret band region (red/blue shifts, decrease in the absorption intensities) depend on the nature of the alkyl substituent attached to the meso-pyridinium group. The greater versatility of the nonplanar porphyrins accommodating the meso-substituents in out-of-plane and in-plane conformations is proposed to explain the observed stoichiometries and the differences on the heteroaggregates spectroscopic properties for each beta-Br(8)(ZnP) compound. The likely conformations assumed by the meso-substituents in these beta-Br(8)(ZnP) compounds and its spectroscopic characteristics are in accordance with the participation of the substituents as the main factor on the extent of the observed red-shifted spectra in nonplanar porphyrins. The obtained association constants (K(IP)) for the dimers and trimers are lower than those previously found for the similar planar cationic porphyrin systems, due to the lack of extensive pi-pi interactions and to the less effective approximation between the ionic groups, resulting in loosened heteroaggregates, particularly for the trimeric systems. Furthermore, the experimental results suggest that the NiTSPc is more distorted in DMSO solution than the CuTSPc derivative, favoring the interaction with the nonplanar beta-Br(8)(ZnP) compounds. (C) 2007 Elsevier B.V. All rights reserved.

Azo-hydrazone tautomerism in protonated aminoazobenzenes: Resonance Raman spectroscopy and quantum-chemical calculations

The protonation effect on the vibrational and electronic spectra of 4-aminoazobenzene and 4-(dimethylamino)azobenzene was investigated by resonance Raman spectroscopy, and the results were discussed on the basis of quantum-chemical calculations. Although this class of molecular systems has been investigated in the past concerning the azo-hydrazone tautomerism, the present work is the first to use CASSCF/CASPT2 calculations to unveil the structure of both tautomers as well the nature of the molecular orbitals involved in chromophoric moieties responsible for the resonance Raman enhancement patterns. More specifically both the resonance Raman and theoretical results show clearly that in the neutral species, the charge transfer transition involves mainly the azo moiety, whereas in the protonated forms there is a great difference, depending on the tautomer. In fact, for the azo tautomer the transition is similar to that observed in the corresponding neutral species, whereas in the hydrazone tautomer such a transition is much more delocalized due to the contribution of the quinoid structure. The characterization of protonated species and the understanding of the tautomerization mechanism are crucial for controlling molecular properties depending on the polarity and pH of the medium.