O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado

The study aimed at the treatment of attapulgite for the development and characterization of composite recycled low density polyethylene - PEBD_rec embedded with natural attapulgite - ATP_NAT, sifted - ATP_PN and attapulgite treated with sulfuric acid - ATP_TR in different compositions (1, 3 and 5%) and compared with the PEBD_rec. The atapulgitas, natural, screened and treated, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and determining the area specific surface (BET). The composites were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), Xray diffraction (XRD), torque rheometry, scanning electron microscopy (SEM) and traction. The composite PEBD_rec / ATP (natural, sieved and treated) were produced by mixing in the molten state in a single screw extruder matrix wire with subsequent reprocessing matrix tape. It was found that the screening of attapulgite not reduce the quantity of quartz and the acid treatment completely extracted dolomite aggregate impurities of the channels attapulgite, and increase their surface area. The addition of attapulgite in PEBD_rec acts as a catalyst, reducing the thermal stability of the polymer. The increased concentration of attapulgite, increases resistance and reduces the elongation at break and modulus of elasticity of the composite PEBD_rec / attapulgite

Tratamentos de fibras de carnaúba [copernicia prunífera (miller) h. e. moore] para o desenvolvimento de compósito biodegradável com matriz de polihidroxibutirato

The use of raw materials from renewable sources for production of materials has been the subject of several studies and researches, because of its potential to substitute petrochemical-based materials. The addition of natural fibers to polymers represents an alternative in the partial or total replacement of glass fibers in composites. In this work, carnauba leaf fibers were used in the production of biodegradable composites with polyhydroxybutyrate (PHB) matrix. To improve the interfacial properties fiber / matrix were studied four chemical treatments to the fibers..The effect of the different chemical treatments on the morphological, physical, chemical and mechanical properties of the fibers and composites were investigated by scanning electron microscopy (SEM), infrared spectroscopy, X-ray diffraction, tensile and flexural tests, dynamic mechanical analysis (DMA), thermogravimetry (TGA) and diferential scanning calorimetry (DSC). The results of tensile tests indicated an increase in tensile strength of the composites after the chemical treatment of the fibers, with best results for the hydrogen peroxide treated fibers, even though the tensile strength of fibers was slightly reduced. This suggests a better interaction fiber/matrix which was also observed by SEM fractographs. The glass transition temperature (Tg) was reduced for all composites compared to the pure polymer which can be attributed to the absorption of solvents, moisture and other low molecular weight molecules by the fibers

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Desenvolvimento e caracterização de compósito a partir da borra da piaçava para construção da parábola de um fogão solar a concentração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Sinterização de matrizes cerâmicas à base de alumina reforçadas por carbetos a partir de precursores poliméricos

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Aplicação de técnicas eletroquímicas na determinação do potencial de corrosividade de ligas de alumínio em água produzida

The resistance of aluminum and their alloys, to the corrosion phenomenon, in aqueous solutions, is a result of the oxide layer formed. However, the corrosion process in the aluminum alloy is associated with the presence a second phase of particles or the presence of chloride ions which promote the disruption of the oxide layer located producing the corrosion process. On the other hand, the term water produced is used to describe the water after the separation of the oil and gas in API separators. The volumes of produced water arrive around 5 more times to the volume of oil produced. The greatest feature of the water is the presence of numerous pollutants. Due to the increased volume of waste around the world in the current decade, the outcome and the effect of the discharge of produced water on the environment has recently become an important issue of environmental concern where numerous treatments are aimed at reducing these contaminants before disposal. Then, this study aims to investigate the electrochemical corrosion behavior of aluminum alloy 6060 in presence of water produced and the influence of organic components as well as chloride ions, by using the electrochemical techniques of linear polarization. The modification of the passive layer and the likely breakpoints were observed by atomic force microscopy (AFM). In the pit formation potential around -0.4 to -0.8 V/EAg/AgCl was observed that the diffusion of chloride ions occurs via the layer formed with the probable formation of pits. Whereas, at temperatures above 65 °C, it was observed that the range of potential for thepit formation was -0.4 to -0.5 V/EAg/AgCl. In all reactions, the concentration of Al(OH)3 in the form of a gel was observed

Germinação de sementes de guandu sob efeito da disponibilidade hídrica e de doses subletais de alumínio

O objetivo deste trabalho foi verificar a germinação de sementes das cultivares de guandu, IAPAR 43-Aratã e IAC Fava Larga, sob efeito da disponibilidade hídrica e de doses subletais de alumínio. Os experimentos foram instalados na Faculdade de Ciências Agrárias e Veterinárias-UNESP, em Jaboticabal (SP), no período de março a maio de 2002. As sementes foram colocadas em caixas de germinação, previamente esterilizadas, revestidas com uma folha de papel germitest umedecido com diferentes concentrações de PEG 6000 (0,0; -0,6; -0,9; -1,2 e -1,5 MPa) e de sulfato de alumínio (0,0; 2,5; 5,0; 7,5; e 10,0 mmol.dm-3). O delineamento experimental utilizado foi o inteiramente casualizado em arranjo fatorial 2 x 5 x 5 (cultivares x disponibilidades hídricas x alumínio), com quatro repetições de 50 sementes. Para complementar a análise estatística foram realizadas análises multivariadas de agrupamento e componentes principais. O experimento foi desenvolvido em câmara de germinação, na temperatura de 25 ºC. A porcentagem de germinação foi verificada no 4.º e 10.º dias após a semeadura. No 10.º dia, as plântulas foram separadas em plúmulas e raízes primárias, para determinar a massa seca. A disponibilidade hídrica foi limitante para a germinação e o crescimento inicial. O efeito do alumínio associado ao estresse hídrico foi evidenciado somente até -0,9 MPa. As concentrações menos elevadas de alumínio estimularam o desenvolvimento das plântulas em condições de estresse hídrico até -0,6 MPa. Os efeitos simultâneos da disponibilidade hídrica e do alumínio reduziram a germinação de sementes da cv. IAC Fava Larga e o crescimento das raízes da cv. IAPAR 43-Aratã.

Interação da deficiência hídrica e da toxicidade do alumínio em guandu cultivado em hidroponia

O objetivo deste trabalho foi avaliar o efeito da interação da deficiência hídrica e da toxicidade do alumínio no crescimento inicial e teores de prolina livre em duas cultivares de guandu, IAPAR 43-Aratã e IAC Fava Larga, cultivadas em hidroponia. As plântulas foram submetidas aos estresses em solução nutritiva (pH 3,8), nos potenciais osmóticos de 0, -0,004, -0,006, -0,008 e -0,010 MPa, com 0, 0,25, 0,50, 0,75 e 1 mmol dm-3 de Al3+. O experimento foi conduzido em sala de crescimento, sob luminária com irradiância média de 190 mmol m-2 s-1 , fotoperíodo de 12 horas e temperatura de 25+1ºC. O delineamento experimental foi inteiramente casualizado, em arranjo fatorial 2x5x5 (duas cultivares de guandu, cinco potenciais osmóticos e cinco níveis de alumínio), com quatro repetições. Os dados foram submetidos às análises de regressão polinomial, agrupamento e componentes principais. A deficiência hídrica causa redução do crescimento da parte aérea do guandu, e a toxicidade do alumínio provoca diminuição do crescimento radicular. Houve aumento nos teores de prolina livre nas duas cultivares sob deficiência hídrica, e apenas na IAC Fava Larga sob toxicidade de alumínio. Na análise multivariada, foi observada alta correlação no crescimento e no acúmulo de prolina na cultivar IAC Fava Larga, o que evidencia provável tolerância aos estresses associados.

Efeito simultâneo da deficiência hídrica e do alumínio tóxico no solo na cultivar IAC91-5155 de cana-de-açúcar

Sugarcane is a very important economic crop in Brazil. The effects of abiotic stresses cause negative reduction of the productivity in the sugarcane industry. In order to identify indicators of stresses tolerance, two physiological variables were evaluated, nitrate reductase activity and chlorophyll contents in young plants of sugarcane, cv. IAC91-5155. The simultaneous effect of abiotic stresses of high occurrence in Brazilian soils are, water deficiency and aluminum toxicity. The plants were submitted to three treatments of water availability (% field capacity, FC): no stress (70% FC), moderate stress (55% FC), and extreme stress (40% FC); and three acidity treatments in the soil (base saturation, V%): no acidity (V=55%), average acidity (V=33%), and high acidity (V=23%). The experiment was carried out in greenhouse, with 29.7 +/- 4.3 degrees C and 75 +/- 10% RH. The experimental design was in randomized blocks, in 3x3 factorial arrangement, with four replicates. After 60 days, nitrate reductase activity and chlorophyll contents were evaluated in the diagnostic leaf. The results demonstrate that the response of plants to a combination of drought and aluminum toxicity, similar to the conditions in many natural environments, is different from the response of plants to each of these stresses applied individually, as typically tested in the laboratory. The nitrate reductase activity can be used as a biochemical-physiological marker of water deficiency while chlorophyll contents can be used as a biochemical-physiological marker of both of them, water deficiency or aluminum toxicity in soil. Both parameters can not be as a biochemical-physiological marker for acclimation of young plants of sugarcane cv. IAC91-5155, under the combined stresses.

Nutrição mineral de hortaliças XXVII: tolerância de cultivares de tomateiro (Lycopersicon esculentum Mill) ao alumínio e ao manganês

Dois experimentos foram conduzidas, em condições de casa-de--vegetação com o objetivo de caracterizar diferenças entre cultivares de tomateiro (Lycopersvcum esculentum Mill) com relação à tolerância ao alumínio e ao manganês. No primeiro experimento foram cultivados em Latossol Roxo (solo ácido, com níveis elevados de alumínio e manganês), seis cultivares de tomateiro: Santa Cruz Kada, Angela IAC 3946, Vital, Roma VF, Pavebo 220 e Ronita N, os três primeiros de crescimento indeterminado e os restantes de crescimento determinado. No segundo experimento, os cultivares Santa Cruz Kada e Ronita N que apresentaram um contraste de desenvolvimento no solo ácido, foram cultivados em solução nutritiva de HOAGLAND & ARNON, modificada para níveis de manganês (0,5 ; 1,5 e 3,0 ppm) e com adição de níveis de alumínio (0,0; 10,0 e 20,00 ppm). Os resultados obtidos permitiram indicar o cultivar Santa Cruz Kada como mais tolerante ao alumínio que o cultuar Ronita N. A maior sensibilidade ao alumínio do cultivar Ronita N foi associada com uma maior exigência em cálcio e fósforo, com uma maior absorção de alumínio e também com efeito depressivo do alumínio na absorção dos nutrientes mencionados, em relação ao cultivar Santa Cruz Kada. A tolerância do cultivar Santa Cruz Kada ao alumínio apesar de ser maior que a do Ronita N pode ser considerada de grau relativamente baixo, podendo-se esperar ainda, boas respostas dessas plantas à calagem nos cultivares em solos ácidos. O comportamento dos cultivares frente aos níveis de manganês em solução nutritiva foi semelhante, não sendo observado qualquer efeito prejudicial do elemento nos níveis empregados.

Avaliação de variáveis fisiológicas em porta-enxertos de videira cultivados em solução nutritiva com a adição de alumínio

Realizou-se este experimento com o objetivo de avaliar a resposta dos porta-enxertos de videira IAC 313 Tropical e IAC 572 Jales a diferentes níveis de alumínio em solução nutritiva. A condução do experimento foi realizada em condições de casa-de-vegetação do Departamento de Produção Vegetal/Área de Horticultura, da Faculdade de Ciências Agronômicas - UNESP/Botucatu. Utilizaram-se cinco níveis de alumínio, a saber: 0, 10, 20, 30 e 40 mg L-1. Após a aplicação dos tratamentos, realizaram-se coletas a cada 15 dias para obtenção das variáveis fisiológicas. O delineamento experimental adotado foi o de parcelas subdivididas, inteiramente casualizado e com 3 repetições. Avaliaram-se as variáveis: taxa de crescimento absoluto e relativo, razão de massa foliar e relação parte aérea/raízes. Concluiu-se que o porta-enxerto IAC 572 Jales, quando submetido ao nível de 10mg Al L-1 na solução, apresentou maior taxa de crescimento absoluto e relativo, e maior redistribuição de massa seca das folhas para o restante da planta, ao passo que o porta-enxerto IAC 313 Tropical, quando submetido a esse nível de alumínio, apresentou um decréscimo acentuado nessas variáveis.

Compósito de poliuretano de mamona e vermiculita para isolação térmica

They are in this study the experimental results of the analysis of thermal performance of composite material made from a plant matrix of polyurethane derived from castor oil of kernel of mamona (COF) and loading of clay-mineral called vermiculite expanded. Bodies of evidence in the proportions in weight of 10%, 15% and 20% were made to determine the thermal properties: conductivity (k), diffusivity (ά) and heat capacity (C), for purposes of comparison, the measurements were also performed the properties of polyurethane of castor without charge and also the oil polyurethane (PU), both already used in thermal insulation. Plates of 0.25 meters of material analyzed were manufactured for use as insulation material in a chamber performance thermal coverage. Thermocouples were distributed on the surface of the cover, and inside the material inside the test chamber and this in turn was subjected to artificial heating, consisting of a bank of incandescent lamps of 3000 w. The results obtained with the composite materials were compared with data from similar tests conducted with the camera alone with: (a) of oil PU, (b) of COF (c) glass wool, (d ) of rock wool. The heat resistance tests were performed with these composites, obtaining temperature limits for use in the range of 100 º C to 130 º C. Based on the analysis of the results of performance and thermal properties, it was possible to conclude that the COF composites with load of expanded vermiculite present behavior very close to those exhibited by commercial insulation material

Estudo térmico e de materiais de um compósito à base de gesso e EPS para construção de casas populares

A housing unit was built to study the thermal performance, and of material using a composite made of gypsum and EPS ground. We used two techniques of construction, using blocks, and filling on the spot. Two compositions of the composite were studied. The blocks were fixed using conventional mortar. In the technical of filling on the spot were used PET bottles up inside the walls to provide mechanical and thermal resistance. Compression tests were realized according to the ABNT standard of sealing bricks. It is going to be shown an analysis of the thermal comfort through the use of thermocouples placed on the walls of the building, internally and externally. The manufacturing viability of houses, using recyclable materials, through the use of composite materials proposed will be demonstrated. The constructive aspects showing the advantages and disadvantages of the technique used also will be broached. The block used presents structural functions and thermal insulating, is low cost and represents an alternative to the use of EPS and PET bottles which are materials that end up occupying much space in the landfills, giving than an ecologically correct use. The results of thermal analysis shows the thermal comfort provided by the composite by the obtainment of a difference between the internal and external surfaces of the walls more exposed to the sun around 7º C. The average temperature of the air inside the building, around 28.0 º C was below the zone of thermal comfort recommended for countries with hot weather

Obtenção de compósitos cerâmicos baseados em Al2O3/TiC através dos precursores poliméricos

The obtaining of ceramic materials from polymeric precursors is subject of numerous studies due to lower energy costs compared to conventional processing. The aim of this study is to investigate and improve the mechanism for obtaining ceramic matrix composite (CMC) based on SiOC/Al2O3/TiC by pyrolysis of polysiloxane in the presence of an active filler and inert filler in the pyrolysis temperature lower than the usually adopted for this technique, with greater strength. It also investigates the influence of pyrolysis temperature, the content of Alas active filler, the presence of infiltrating agents (Al, glass and polymer) after pyrolysis, temperature and infiltration time on some physical and mechanical properties. Alumina is used as inert filler and Al and Ti as active filler in the pyrolysis. Aluminum, glass and polysiloxane are used as agents infiltrating the post-pyrolysis. The results are analyzed with respect to porosity and bulk density by the Archimedes method, the presence of crystalline phases by X-ray diffraction (XRD) and microstructure by scanning electron microscopy (SEM). The ceramic pyrolyzed between 850 °C 1400 °C contain porosity 15% to 33%, density 2.34 g/cm3 and flexural strength at 4 points from 30 to 42 MPa. The microstructure features are porous, with an array of Al2O3 reinforced by TiC particles and AlTi3. The infiltration post-pyrolysis reveals decrease in porosity and increase density and strength. The composites have potential applications where thermal stability is the main requirement

Desenvolvimento de um compósito de espuma rígida de poliuretana de mamona e fibras de sisal para isolação térmica

The search for sustainable technologies that can contribute to reduce energy consumption is a great challenge in the field of insulation materials. In this context, composites manufactured from vegetal sources are an alternative technology. The principal objectives of this work are the development and characterization of a composite composed by the rigid polyurethane foam derived from castor oil (commercially available as RESPAN D40) and sisal fibers. The manufacture of the composite was done with expansion controlled inside a closed mold. The sisal fibers where used in the form of needlepunched nonwoven with a mean density of 1150 g/m2 and 1350 g/m2. The composite characterization was performed through the following tests: thermal conductivity, thermal behavior, thermo gravimetric analysis (TG/DTG), mechanical strength in compression and flexural, apparent density, water absorption in percentile, and the samples morphology was analyzed in a MEV. The density and humidity percentage of the sisal fiber were also determined. The thermal conductivity of the composites was higher than the pure polyurethane foam, the addition of nonwoven sisal fibers will become in a higher level of compact foam, reducing empty spaces (cells) of polyurethane, inducing an increase in k value. The apparent density of the composites was higher than pure polyurethane foam. In the results of water absorption tests, was seen a higher absorption percent of the composites, what is related to the presence of sisal fibers which are hygroscopic. From TG/DTG results, with the addition of sisal fibers reduced the strength to thermal degradation of the composites, a higher loss of mass was observed in the temperature band between 200 and 340 °C, related to urethane bonds decomposition and cellulose degradation and its derivatives. About mechanical behavior in compression and flexural, composites presented a better mechanical behavior than the rigid polyurethane foam. An increase in the amount of sisal fibers induces a higher rigidity of the composites. At the thermal behavior tests, the composites were more mechanically and thermally resistant than some materials commonly used for thermal insulation, they present the same or better results. The density of nonwoven sisal fiber had influence over the insulation grade; this means that, an increaser in sisal fiber density helped to retain the heat