O trem não pode parar: reformando uma oficina de locomotivas

De maneira geral, a ideia central da presente tese é compreender como as organizações se organizam, ou seja, acontecem, constituem-se como tal, em tempo real. Para isso, do ponto de vista empírico tomei como referência o dia-a-dia de uma oficina ferroviária, especificamente a área responsável pelo reparo leve de locomotivas. Do ponto de vista ontológico, epistemológico e teórico optei por adotar como referência básica a proposta de Theodore Schatzki. Schatzki propõe uma ontologia das práticas sociais em que o site do social (ou, o contexto no qual a coexistência humana se desenrola) é composto por uma malha não só de nexos de práticas (fazeres e dizeres corporais humanos), mas também de arranjos materiais (objetos, artefatos, corpos). Nessa perspectiva, as organizações em geral poderiam ser entendidas como configurações de malhas de práticas#arranjos materiais. Assim, de forma mais específica procurei analisar – principalmente através do cotidiano dos mecânicos/eletricistas – os fazeres e dizeres corporais e os arranjos materiais envolvidos na prática de reparo e manutenção de locomotivas e que conformavam a oficina. O trabalho de campo, de caráter etnográfico, baseou-se em 6 meses de observação do dia-a-dia da oficina. Além da observação, construí dados através do registro de imagens (fotografias), da consulta a documentos e de entrevistas. A partir daí pude mostrar que a “oficina” (em particular, ou uma organização, em geral), como um fenômeno social, poderia ser tratada como uma malha práticas#arranjos materiais. Apontei que as diferentes atividades (fazeres e dizeres) de programação da manutenção, de alocação de mão de obra, de identificação de defeitos, de inspeção, regulagem e troca de peças e componentes etc, executadas pelos programadores do PCM, pelos líderes de turma e supervisores, pelos especialistas do GAF, pelos mecânicos/eletricistas em meio a, e através de diferentes arranjos (elementos) materiais como o “escritório”, a “mesa”, os galpões, as valas, a sala de reunião, o sistema de gestão da manutenção, as “notas”, as planilhas do GAF, as ART´s e PT´s, a locomotiva, as peças e componentes, as ferramentas, para garantir a disponibilidade e a confiabilidade das locomotivas, bem como a segurança dos funcionários, é que dão “vida” (animam) e “materializam” a “oficina”. A partir do que pude observar no campo, recorri também à noção de ciborgue e cyborganization para descrever e aprofundar como elementos humanos (mecânicos/eletricistas) e não humanos (locomotivas, peças, componentes) intra-agiam. Transitei ainda pelo campo do embodiment tendo em vista que passei a me dar conta de que as intra-ações com as máquinas eram frequentemente experimentadas pelos mecânicos/eletricistas como corporais envolvendo posturas, movimentos e vivências. Nesse caso as capacidades perceptivas-sensoriais emergiram como elementos decisivos para que os mecânicos/eletricistas conseguissem realizar o seu trabalho. Argumento portanto que, no caso que estudei, o corpo-(mecânico/eletricista) é também sujeito, tem também papel ativo na vida organizacional, é capaz de produzir (e não só reproduzir) práticas.

Rheological Properties of a Sodium Bentonite and Lactose Aqueous Dispersion

Aim of this paper is show the viscosity measure of a sodium bentonite-water-lactose mixture and your rheological behaviour. This analysis showed the formation of tridimensional structure type and formation of stratified silicate/lactose, this occurred due to different concentrations of organic products into mixture and due to a difference of rotation during viscosity measument. Formation of networks is a consequence of the attraction between the silicate layers in water-lactose mixture. In the present work aqueous solutions of lactose with concentration of 7%, 5%, 3%, 1% and 0% (wt %) were used.

CERAMIC MATERIAL FROM SEWAGE SLUDGE AS SUPPORT MATERIAL SUPPLY WATER FILTRATION

This study shows a possibility of using municipal sewage sludge after thermal treatment in the production of a filtering material to water treatment. Due to the fast urbanization and implementation of high standards for effluent in many countries in recent years, the sewage sludge is being produced in an ever increasing amount. Therefore, the use of sludge is a suitable solution for the expected large quantity of sludge. Dehydration of sludge was performed by controlled heating at temperatures of 1100 degrees C, 850 degrees C, 650 degrees C, 350 degrees C for 3 hours. After thermal treatment the sludge was characterized by X-ray fluorescence, TG/DTG/DTA, residue solubilization and residue lixiviation tests. The aim of the present work was to observe, thought the characterization techniques, if the treated sewage sludge is or not adequate to be used as filter material to water treatment. It will be verified which treatment temperature of the sludge offer possibility to its use in water treatment without carrying pollutants in concentrations out of the standards.

A palavra cantada nos espaços intersubjetivos de um centro de atenção psisossocial do município do Natal/RN

The psychiatric care and mental health are undergoing constant change over the History. The Brazilian Psychiatric Reform, which brings up the deinstitutionalization as a structuring in the restorative care process. The Reform has as one of the mainly substitutive services the Centers for Psychosocial Care (CAPS), which work from the Singular Therapeutic Project (PTS) in order to restore the autonomy and restore the dignity of users. The therapeutic workshop is some of the resources used and work several kinds of activities as: writing, handcraft, music, poetry, and so forth. This study set up to apprehend the social representations of helping of the music workshop carried out in the CAPS II east of Natal/RN, from the reports given by the participants of the workshop, using the focal group as technique. This is a descriptive exploratory study with a qualitative approach. A total of 16 users participated in four musical therapeutic workshops from April to May 2010. The study was approved by the Ethics and Research Committee of UFRN. The discursive material from the workshop was submitted to the informational resource of Analyse Lexicale par Contexte d um Ensemble de Segments de Texte, ALCESTE, and analyzed based on the Theory of Representations and the Central Core Theory. The majority of subjects were men (62.5%), single (62.5%), aged 40-49 years (37.6%) and elementary school level (56.2 %). The reports were transcribed and submitted to the classification system of ALCESTE, which elected the following categories: Category 1 - Experience in the Word Family Sung, Category 2 - Musical Experiences and Approaches, and Category 3 - Feelings and emotions evoked by music. The representation of these individuals is anchored in the experience they have with the CAPS, lived and socialized by common sense, through this particular social group workshop objectified in music therapy as a therapeutic modality enjoyable. The central core revealed the intrinsic relationship between users and the music, establishing a relationship of openness to use the same while its therapeutic use in workshops of substitute services for mental health. Peripherals elements issues are related to listen, share and experience music in the family. Intermediary Elements relate to the feelings and emotions evoked by music, given her close relationship with it. It was found in the study that music can be construed as an artifact of good therapeutic responsiveness to users, configuring it as an invigorating and enjoyable therapy, confirming the need for continuity of this activity, as well as its expansion into the service

Atenção à saúde da pessoa idosa na estratégia saúde da família no município de Santo Antônio/RN: um estudo de caso

According to demographic estimates, by the year 2025 Brazil will be the sixth country in the world in number of elderly. For this reason, it is a purpose of public policies to help people to reach that age being healthier. The current health care model of health surveillance through the Family Health Strategy (EFS, in portuguese) is configured as a gateway into the care of the elderly in the Unified Health System (SUS, in portuguese). It is also an area of development of practices to promote health, prevention and control of chronic nondegenerative diseases. The aim of this study was to analyze the health care of the elderly provided by ESF professionals for the achievement of a full care. The study is descriptive case study with a quantitative approach, performed in the city of Santo Antônio/RN. The population included all health professionals, who are FHS members of the city that agreed to participate of the survey, a total of 80 professionals. Data were collected using a structured questionnaire, having mostly closed questions and divided into two parts: one containing sociodemographic information of health professionals and vocational training and the other, the activities carried on by the professionals in senior care, being analyzed from a database tabulated in a spreadsheet and discussed according to the descriptive statistics in tables, graphs and charts using frequencies, medians and values of central tendency. It was verified a predominance of professionals who finished highschool, mostly female, aged from 30 to 34 years old, with training completed in the last 10 years, without being graduated in the field of geriatrics or gerontology and mostly without training in gerontology. Family members and caregivers were the components of the social support network most identified by the professionals (66.3%).The elderly access to the Family Health Basic Unit was considered by83.8% of professionals as the most important factor that interferes in the activities of health care of the elderly. Considering the inclusion of the family in care: 98.8% of professionals consider the family as one of the goals of care, but 82.5% assist the family to know their role and participate in the care of the elderly, emphasizing that no professional makes use of tools for evaluating the functionality of the family. Regarding the actions taken to assist the elderly, 91.25% have home visits program to the elderly, 88.75% use the host program; 77.5% know the habits of life, cultural, ethical and religious values of the elderly, their families and their community ;51.25% complement the activities through intersectoral actions, 50%participate in groups of living with the elderly; 33.75% keeps track and maintain updated the health information of the elderly; 11.25% of the professionals perform the Single Therapy Planning (PTS, in portuguese) and few implement the actions to promote health according to PTS; there is a deficit in the number of professional categories in the identification and monitoring of the frail older people in their households. It is concluded that the health care of the elderly developed by ESF professionals differs among the professional categories. It was identified weaknesses in the promotion of an active and healthy aging and also in the establishment of an integrated and full care of the elderly. It is recommended the adoption of permanent educational activities by the City Management, initially for ESF professionals in the the perspective of the guidelines of the National Policy of Health Care for the Elderly and later to the other professionals that are part of the health care network of the elderly, at all levels of care in the city for the development of strategies and practices that promote the improvement of the quality of healthcare for the elderly, expecting concrete and effective results in terms of promoting health within Brazilian reality

Phosphate forms in plant and their internal buffering in five soybean cultivars

Diferenças inter e intra-específicas na habilidade de suportar períodos de estresse nutricional podem dever-se à capacidade de armazenar e liberar íons dos vacúolos, e, ou, à intensidade de retranslocação de nutrientes em tais condições. Neste trabalho, pretendeu-se avaliar diferenças varietais quanto ao tamanho do pool não-metabólico de Pi; velocidade de liberação do Pi previamente armazenado (VLPi), quando o P citoplasmático cai a um valor limite; capacidade de transportar Pi de regiões menos ativas para aquelas mais ativas metabolicamente e definir compartimentos que são preferencialmente fontes e os que são preferencialmente drenos para o Pi, em condições de absorção limitada de P. Avaliaram-se a produção de matéria seca e os teores internos de Pi, orgânico (Po) e total solúvel em ácido (Pts), de diferentes órgãos de plantas dos cultivares de soja (Glycine max L. Merrill) Santa Rosa, Uberaba, IAC8, Doko e UFV1, submetidos a oito dias de omissão do elemento. A VLPi foi estimada como tangente às equações obtidas para Pi como função do perído de omissão no ponto médio do período de omissão em que houve maior decréscimo em Pi (zero a quatro dias de omissão de P), t = dois dias, considerando-se que -deltaPi/deltat expressa a velocidade de liberação de Pi. A capacidade interna de tamponamento de Pi (CTIPi) foi calculada como o inverso da VLPi. O cultivar Santa Rosa apresentou maior capacidade de armazenar Pi, quando o suprimento externo foi alto, liberando-o mais intensamente sob condições de baixo suprimento de P que os cultivares IAC8 e UFV1. O cultivar Uberaba mostrou-se superior ao Doko em sua habilidade de armazenar e utilizar o Pi. Folhas superiores mostraram ser o principal dreno para o Pi armazenado em folhas medianas e inferiores, seguidas por raízes e caules. Raízes comportaram-se como fontes ou drenos para o Pi. Raízes e folhas superiores apresentaram maiores (VLPi) e menores valores de CTIPi que folhas medianas e folhas inferiores, sendo o caule o compartimento com menor VLPi e maior CTIPi. Dentre as variedades, as diferenças foram pequenas, destacando-se a maior VLPi e menor CTIPi do cultivar Santa Rosa. O cultivar Doko apresentou a menor VLPi e maior CTIPi, enquanto Uberaba, IAC8 e UFV1 ocuparam posição intermediária quanto a essas características.

Oxygen Diffusion in an Nb-Ta Alloy Measured by Mechanical Spectroscopy

When metals that present bcc crystalline structure receive the addition of interstitial atoms as oxygen, nitrogen, hydrogen and carbon, they undergo significant changes in their physical properties because they are able to dissolve great amounts of those interstitial elements, and thus form solid solutions. Niobium and most of its alloys possess a bcc crystalline structure and, because Brazil is the largest world exporter of this metal, it is fundamental to understand the interaction mechanisms between interstitial elements and niobium or its alloys. In this study, mechanical spectroscopy (internal friction) measurements were performed on Nb-8.9wt%Ta alloys containing oxygen in solid solution. The experimental results presented complex internal friction spectra. With the addition of substitutional solute, interactions between the two types of solutes (substitutional and interstitial) were observed, considering that the random distribution of the interstitial atoms was affected by the presence of substitutional atoms. Interstitial diffusion coefficients, pre-exponential factors and activation energies were calculated for oxygen in this alloy.

ZnO-TiO2 composite formed by mixed oxides via polyol

Among the researches on preparation and test of nanostructured materials, titanium dioxide and zinc oxide have been the most frequent studied oxides. In order to extend their properties, composites have been prepared using three different methods: Polyol Method, Sol-gel Process and a combination of the two processes (hybrid process). Recent research showed best properties in composite materials than in pure oxides. In this work is presented the preparation and the structural characterization of ZnO-TiO2 composite nanostructures to be tested for their performance in electrocatalysis and in further trial on photovoltaic cells.

Thermoeconomic analysis method for optimization of combined heat and power systems

This article presents an thermoeconomic analysis of cogeneration plants, applied as a rational technique to produce electric power and saturated steam. The aim of this new methodology is the minimum exergetic manufacturing cost (EMC), based on the Second Law of Thermodynamics. The decision variables selected for the optimization are the pressure and the temperature of the steam leaving the boiler in the case of using steam turbine, and the pressure ratio, turbine exhaust temperature and mass flow in the case of using gas turbines. The equations for calculating the capital costs of the components and products are formulated as a function of these decision variables. An application of the method using real data of a multinational chemical industry located in São Paulo state is presented. The conditions which establish the minimum cost are presented as finals conclusions.

Silicon carbide surface modification by nitrogen plasma expander

Silicon carbide (SiC) has been employed in many different fields such as ballistic armor, thermal coating, high performance mirror substrate, semiconductors devices, among other things. Plasma application over the silicon carbide ceramics is relatively recent and it is able to promote relevant superficial modifications. Plasma expander was used in this work which was supplied by nitrogen and switched by a capacitor bank. Nitrogen plasma was applied over ceramic samples for 20 minutes, in a total medium of 1440 plasma pulses. SiC ceramics were produced by uniaxial pressing method (40 MPa) associated to isostatic pressing (300 MPa) and sintered at 1950 degrees C under argon gas atmosphere. Silicon carbide (beta-sic - BF-12) supplied by HC-Starck and sintering additive (7.6% YAG - Yttrium Aluminum Garnet) were used in order to obtain the ceramics. Before and after the plasma application, the samples were characterized by SEM, AFM, contact angle and surface energy measurement.

Obtaining of Nanoapatite in Ti-7.5Mo Surface After Nanotube Growth

Titanium and their alloys have been used for biomedical applications due their excellent mechanical properties, corrosion resistance and biocompatibility. However, they are considered bioinerts materials because when they are inserted into the human body they are cannot form a chemical bond with bone. In several studies, the authors have attempted to modify their characteristic with treatments that changes the material surface. The purpose of this work was to evaluate obtaining of nanoapatite after growing of the nanotubes in surface of Ti-7.5Mo alloy. Alloy was obtained from c.p. titanium and molibdenium by using an arc-melting furnace. Ingots were submitted to heat treatment and they were cold worked by swaging. Nanotubes were processed using anodic oxidation of alloy in electrolyte solution. Surfaces were investigated using scanning electron microscope (SEM), FEG-SEM and thin-film x-ray diffraction. The results indicate that nanoapatite coating could form on surface of Ti-7.5Mo experimental alloy after nanotubes growth.

Orbit determination using GPS including perturbations due to geopotential coefficients of high degree and order and solar radiation pressure

The main target here is to determine the orbit of an artificial satellite, using signals of the GPS constellation and least squares algorithms implemented through sequential Givens rotations as a method of estimation, with the aim of improving the performance of the orbit estimation process and, at the same time, minimizing the computational procedure cost. Geopotential perturbations up to high order and direct solar radiation pressure were taken into account. It was also considered the position of the GPS antenna on the satellite body that, lately, consists of the influence of the satellite attitude motion in the orbit determination process. An application has been done, using real data from the Topex/Poseidon satellite, whose ephemeris is available at Internet. The best accuracy obtained in position was smaller than 5 meters for short period (2 hours) and smaller than 28 meters for long period (24 hours) orbit determination. In both cases, the perturbations mentioned before were taken into consideration and the analysis occurred without selective availability on the signals measurements.

Preparation of Ni-Ti-Mo and Ni-Ti-Mo-Zr Alloys by High-Energy Ball Milling and Subsequent Hot Pressing

This work discusses on the preparation of Ni-45Ti-5Mo, Ni-40Ti-10Mo and Ni-46Ti-2Mo-2Zr (at-%) alloys by high-energy ball milling and hot pressing, which are potentially attractive for dental and medical applications. The milling process was performed in stainless steel balls (19mm diameter) and vials (225 mL) using a rotary speed of 300rpm and a ball-to-powder weight ratio of 10:1. Hot pressing under vacuum was performed in a BN-coated graphite crucible at 900 degrees C for 1 h using a load of 20 MPa. The milled and hot-pressed materials were characterized by X-ray diffraction, electron scanning microscopy, and electron dispersive spectrometry. Peaks of B2-NiTi and Ni4Ti3 were identified in XRD patterns of Ni-45Ti-5Mo, Ni-40Ti-10Mo and Ni-46Ti-2Mo-2Zr powders milled for 1h. The NiTi compound dissolved small Mo amounts lower than 4 at%, which were measured by EDS analysis. Moreover, it was identified the existence of an unknown Mo-rich phase in microstructures of the hot-pressed Ni-Ti-Mo alloys.

On the Phase Transformation in Mechanically Alloyed Ni-Nb and Ni-Ta and Ni-Nb-Ta Powders

This paper reports on the phase transformation during the preparation of Ni-25Nb, Ni-25Ta, Ni-20Nb-5Ta and Ni-15Nb-10Ta (at-%) powders by high-energy ball milling from elemental powders. The milling process was performed in a planetary ball milling using stainless steel balls and vials, rotary speed of 300rpm, and a ball-to-powder of 10:1. To minimize contamination and spontaneous ignition the powders were handled under argon atmosphere in a glove box. The milled powders were characterized by means of X-ray diffraction techniques. Results indicated that the Ni atoms were preferentially dissolved into the Nb (and/or Ta) lattice at the initial milling times, which contributed to change the relative intensity on the diffraction peaks. After the dissolution of Nb (and/or Ta) into the Ni lattice, the Ni peaks were moved to the direction of lower diffraction angles in Ni-25Nb, Ni-25Ta, Ni-20Nb-5Ta, Ni-15Nb-10Ta powders, indicating that the mechanical alloying was achieved.

Structural Evaluation of Mechanically Alloyed and Heat-Treated Ti-25at-%Si Powders

This work discusses on the structural evaluation of mechanically alloyed and heat-treated Ti-25at%Si powders. The milling process was conducted in a planetary ball mill using stainless steel balls/vials, 200 rpm and ball-to-powder weight ratio of 5:1, whereas the heat treatment was conducted under Ar atmosphere at 1100 C for 4 h. Samples were characterized by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy and energy dispersive spectrometry. The Si peaks disappeared after milling for 30h, indicating that the Si atoms were dissolved into the Ti lattice in order to form an extended solid solution. The Ti peaks were broadened and their intensities reduced for longer milling times whereas a halo was formed in Ti-25Si powders milled for 200h suggesting that an amorphous structure was achieved. The crystallite size was decreased with increasing milling times. A large Ti3Si amount was found in mechanically alloyed Ti-25at%Si powders after heating at 1100 degrees C for 4h.