Microfluidic microbial fuel cell fabrication and rapid screening of electrochemically microbes

The demand for novel renewable energy sources, together with the new findings on bacterial electron transport mechanisms and the progress in microbial fuel cell design, have raised a noticeable interest in microbial power generation. Microbial fuel cell (MFC) is an electrochemical device that converts organic substrates into electricity via catalytic conversion by microorganism. It has represented a continuously growing research field during the past few years. The great advantage of this device is the direct conversion of the substrate into electricity and in the future, MFC may be linked to municipal waste streams or sources of agricultural and animal waste, providing a sustainable system for waste treatment and energy production. However, these novel green technologies have not yet been used for practical applications due to their low power outputs and challenges associated with scale-up, so in-depth studies are highly necessary to significantly improve and optimize the device working conditions. For the time being, the micro-scale MFCs show great potential in the rapid screening of electrochemically active microbes. This thesis presents how it will be possible to optimize the properties and design of the micro-size microbial fuel cell for maximum efficiency by understanding the MFC system. So it will involve designing, building and testing a miniature microbial fuel cell using a new species of microorganisms that promises high efficiency and long lifetime. The new device offer unique advantages of fast start-up, high sensitivity and superior microfluidic control over the measured microenvironment, which makes them good candidates for rapid screening of electrode materials, bacterial strains and growth media. It will be made in the Centre of Hybrid Biodevices (Faculty of Physical Sciences and Engineering, University of Southampton) from polymer materials like PDMS. The eventual aim is to develop a system with the optimum combination of microorganism, ion exchange membrane and growth medium. After fabricating the cell, different bacteria and plankton species will be grown in the device and the microbial fuel cell characterized for open circuit voltage and power. It will also use photo-sensitive organisms and characterize the power produced by the device in response to optical illumination.

Development of an innovative pyrolysis plant for the production of secondary raw materials

This project was born with the aim of developing an environmentally and financially sustainable process to dispose of end-life tires. In this perspective was devised an innovative static bed batch pilot reactor where pyrolysis can be carried out on the whole tires in order to recover energy and materials and simultaneously save the energy costs of their shredding. The innovative plant is also able to guarantee a high safety of the process thanks to the presence of a hydraulic guard. The pilot plant was used to pyrolyze new and end-life tires at temperatures from 400 to 600°C with step of 50°C in presence of steam. The main objective of this research was to evaluate the influence of the maximum process temperature on yields and chemical-physics properties of pyrolysis products. In addition, in view of a scale-up of the plant in continuous mode, the influence of the nature of several different tires as well as the effects of the aging on the final products were studied. The same pilot plant was also used to carry out pyrolysis on polymeric matrix composites in order to obtain chemical feedstocks from the resin degradation together with the recovery of the reinforcement in the form of fibers. Carbon fibers reinforced composites ad fiberglass was treated in the 450-600°C range and the products was fully characterized. A second oxidative step was performed on the pyrolysis solid residue in order to obtain the fibers in a suitable condition for a subsequent re-impregnation in order to close the composite Life Cycle in a cradle-to-cradle approach. These investigations have demonstrated that steel wires, char, carbon and glass fibers recovered in the prototypal plant as solid residues can be a viable alternative to pristine materials, making use of them to obtain new products with a commercial added value.

Hydraulic evaluation of the gyro electric wave energy converter

Motivation Thanks for a scholarship offered by ALma Mater Studiorum I could stay in Denmark for six months during which I could do physical tests on the device Gyro PTO at the Departmet of Civil Engineering of Aalborg University. Aim The goal of my thesis is an hydraulic evaluation of the device: Gyro PTO, a gyroscopic device for conversion of mechanical energy in ocean surface waves to electrical energy. The principle of the system is the application of the gyroscopic moment of flywheels equipped on a swing float excited by waves. The laboratory activities were carried out by: Morten Kramer, Jan Olsen, Irene Guaraldi, Morten Thøtt, Nikolaj Holk. The main purpose of the tests was to investigate the power absorption performance in irregular waves, but testing also included performance measures in regular waves and simple tests to get knowledge about characteristics of the device, which could facilitate the possibility of performing numerical simulations and optimizations. Methodology To generate the waves and measure the performance of the device a workstation was created in the laboratory. The workstation consist of four computers in each of wich there was a different program. Programs have been used : Awasys6, LabView, Wave lab, Motive optitrack, Matlab, Autocad Main Results Thanks to the obtained data with the tank testing was possible to make the process of wave analisys. We obtained significant wave height and period through a script Matlab and then the values of power produced, and energy efficiency of the device for two types of waves: regular and irregular. We also got results as: physical size, weight, inertia moments, hydrostatics, eigen periods, mooring stiffness, friction, hydrodynamic coefficients etc. We obtained significant parameters related to the prototype in the laboratory after which we scale up the results obtained for two future applications: one in Nissun Brending and in the North Sea. Conclusions The main conclusion on the testing is that more focus should be put into ensuring a stable and positive power output in a variety of wave conditions. In the irregular waves the power production was negative and therefore it does not make sense to scale up the results directly. The average measured capture width in the regular waves was 0.21 m. As the device width is 0.63 m this corresponds to a capture width ratio of: 0.21/0.63 * 100 = 33 %. Let’s assume that it is possible to get the device to produce as well in irregular waves under any wave conditions, and lets further assume that the yearly absorbed energy can be converted into electricity at a PTO-efficiency of 90 %. Under all those assumptions the results in table are found, i.e. a Nissum Bredning would produce 0.87 MWh/year and a North Sea device 85 MWh/year.

Synthesis and organocatalyzed enantioselective transfer-hydrogenation of beta-amino nitroolefins

The importance of the β-amino nitroalkanes is due to their high versatility allowing a straightforward entry to a variety of nitrogen-containing chiral building blocks; furthermore obtaining them in enantiopure form allows their use in the synthesis of biologically active compounds or their utilization as chiral ligands for different uses. In this work, a reaction for obtaining enantiopure β-amino nitroalkanes through asymmetric organocatalysis has been developed. The synthetic strategy adopted for the obtainment of these compounds was based on an asymmetric reduction of β-amino nitroolefins in a transfer hydrogenation reaction, involving an Hantzsch ester as hydrogen source and a chiral thiourea as organic catalyst. After the optimization of the reaction conditions over the β-acyl-amino nitrostyrene, we tested the reaction generality over other aromatic compound and for Boc protected substrate both aromatic and aliphatic. A scale-up of the reaction was also performed.

Crescita della Chlorophyta Haematococcus pluvialis in risposta alla variazione di componenti chimici del terreno di coltura

Haematococcus pluvialis è una delle specie microalgali di maggior interesse biotecnologico, poiché rappresenta la maggior fonte naturale del pigmento astaxantina, carotenoide molto ricercato nell’ industria mangimistica, nutraceutica, cosmetica e farmacologica. La produzione massiva di questa specie è ancora caratterizzata da numerose limitazioni allo scale-up; il principale collo di bottiglia della coltivazione è rappresentato dalla crescita lenta e dal relativamente basso numero di cellule finali che vengono raggiunte, traducendosi in una minore quantità di astaxantina prodotta. Lo scopo di questo lavoro è stato quello di provare ad incrementare le velocità di crescita della fase iniziale dello stadio vegetativo dell’alga, utilizzando sostanze di crescita quali fitoormoni, sostanza organica, vitamine e medium formulati con diversi rapporti N/P, in modo tale da ottenere un maggiore numero di cellule che possono essere indotte a produrre astaxantina. Alcune condizioni hanno mostrato effetti sulla crescita, tuttavia la condizione che ha fornito un maggior incremento come numero di cellule è stata quella caratterizzata dall’utilizzo di un basso valore del rapporto N/P, rispetto al valore solitamente utilizzato per questa specie. Nonostante siano necessari ancora diversi sforzi per individuare i fattori biotici e abiotici che regolano la crescita di H. pluvialis nell’ottica di una produzione massiva, il principale collo di bottiglia di questo processo può essere quindi ridotto con l’utilizzo delle sostanze stimolanti la crescita sperimentate in questo lavoro e dalla formulazione di medium di crescita che forniscano un compromesso tra un alto numero di cellule finali e costi di produzione relativamente contenuti.

Efficient Liquid Liquid Extraction By Emulsion Formation and Separation in Robust Milli-Fluidic Devices

Conventional liquid liquid extraction (LLE) methods require large volumes of fluids to achieve the desired mass transfer of a solute, which is unsuitable for systems dealing with a low volume or high value product. An alternative to these methods is to scale down the process. Millifluidic devices share many of the benefits of microfluidic systems, including low fluid volumes, increased interfacial area-to-volume ratio, and predictability. A robust millifluidic device was created from acrylic, glass, and aluminum. The channel is lined with a hydrogel cured in the bottom half of the device channel. This hydrogel stabilizes co-current laminar flow of immiscible organic and aqueous phases. Mass transfer of the solute occurs across the interface of these contacting phases. Using a y-junction, an aqueous emulsion is created in an organic phase. The emulsion travels through a length of tubing and then enters the co-current laminar flow device, where the emulsion is broken and each phase can be collected separately. The inclusion of this emulsion formation and separation increases the contact area between the organic and aqueous phases, therefore increasing the area over which mass transfer can occur. Using this design, 95% extraction efficiency was obtained, where 100% is represented by equilibrium. By continuing to explore this LLE process, the process can be optimized and with better understanding may be more accurately modeled. This system has the potential to scale up to the industrial level and provide the efficient extraction required with low fluid volumes and a well-behaved system.

Outcome at two years of age in a Swiss national cohort of extremely preterm infants born between 2000 and 2008

Background While survival rates of extremely preterm infants have improved over the last decades, the incidence of neurodevelopmental disability (ND) in survivors remains high. Representative current data on the severity of disability and of risk factors associated with poor outcome in this growing population are necessary for clinical guidance and parent counselling. Methods Prospective longitudinal multicentre cohort study of preterm infants born in Switzerland between 240/7 and 276/7 weeks gestational age during 2000–2008. Mortality, adverse outcome (death or severe ND) at two years, and predictors for poor outcome were analysed using multilevel multivariate logistic regression. Neurodevelopment was assessed using Bayley Scales of Infant Development II. Cerebral palsy was graded after the Gross Motor Function Classification System. Results Of 1266 live born infants, 422 (33%) died. Follow-up information was available for 684 (81%) survivors: 440 (64%) showed favourable outcome, 166 (24%) moderate ND, and 78 (11%) severe ND. At birth, lower gestational age, intrauterine growth restriction and absence of antenatal corticosteroids were associated with mortality and adverse outcome (p < 0.001). At 360/7 weeks postmenstrual age, bronchopulmonary dysplasia, major brain injury and retinopathy of prematurity were the main predictors for adverse outcome (p < 0.05). Survival without moderate or severe ND increased from 27% to 39% during the observation period (p = 0.02). Conclusions In this recent Swiss national cohort study of extremely preterm infants, neonatal mortality was determined by gestational age, birth weight, and antenatal corticosteroids while neurodevelopmental outcome was determined by the major neonatal morbidities. We observed an increase of survival without moderate or severe disability.

Design of custom-shaped vascularized tissues using microtissue spheroids as minimal building units

Tissue engineering strategies are gathering clinical momentum in regenerative medicine and are expected to provide excellent opportunities for therapy for difficult-to-treat human pathologies. Being aware of the requirement to produce larger artificial tissue implants for clinical applications, we used microtissues, produced using gravity-enforced self-assembly of monodispersed primary cells, as minimal tissue units to generate scaffold-free vascularized artificial macrotissues in custom-shaped agarose molds. Mouse myoblast, pig and human articular-derived chondrocytes, and human myofibroblast (HMF)-composed microtissues (microm3 scale) were amalgamated to form coherent macrotissue patches (mm3 scale) of a desired shape. Macrotissues, assembled from the human umbilical vein endothelial cell (HUVEC)-coated HMF microtissues, developed a vascular system, which functionally connected to the chicken embryo's vasculature after implantation. The design of scaffold-free vascularized macrotissues is a first step toward the scale-up and production of artificial tissue implants for future tissue engineering initiatives.

The spatial distribution of Copernicia alba (Morong) in the district of Bahia Negra, Paraguay

The Humid Chaco of Northeast Paraguay harbors monoculture palm savannas in which Copernicia alba is the only dominant overstory species. The study’s objective was to provide the complete spatial distribution of a simple ecosystem lacking confounding factors of overstory competition and changes in slope. Palms within six, 50 x 50m plots were marked by their GPS location and measured for dbh and total stem height. The spatial distribution was individually analyzed for each plot at the local scale up to 12 m using Ripley’s K test. For the total population including juvenile and adult plants, the sample plots contained both random and clustered distribution patterns. In each of the six plots, the juvenile populations exhibited more clustered patterns than the adult population of each plot.

Microfluidic fabrication of advanced microcapsules for use in self-healing materials

The proposed work aims to facilitate the development of a microfluidic platform for the production of advanced microcapsules containing active agents which can be the functional constituents of self-healing composites. The creation of such microcapsules is enabled by the unique flow characteristics within microchannels including precise control over shear and interfacial forces for droplet creation and manipulation as well as the ability to form a solid shell either chemically or via the addition of thermal or irradiative energy. Microchannel design and a study of the fluid dynamics and mechanisms for shell creation are undertaken in order to establish a fabrication approach capable of producing healing-agent-containing microcapsules. An in-depth study of the process parameters has been undertaken in order to elucidate the advantages of this production technique including precise control of size (i.e., monodispersity) and surface morphology of the microcapsules. This project also aims to aid the optimization of the mechanical properties as well as healing performance of self-healing composites by studying the effects of the advantageous properties of the as-produced microcapsules. Scale-up of the microfluidic fabrication using parallel devices on a single chip as well as on-chip microcapsule production and shape control will also be investigated. It will be demonstrated that microfluidic fabrication is a versatile approach for the efficient creation of functional microcapsules allowing for superior design of self-healing composites.

The relationship between pain intensity and severity and depression in older people: exploratory study

BACKGROUND: Pain and depression are known to be associated in later life, and both have a negative effect on physical performance both separately and in combination. The nature of the relationships between pain intensity and depression in elderly persons experiencing pain is less clear. The objectives of this study were to explore which factors are associated with depressed mood in older people experiencing pain, and to test the hypothesis that older people experiencing pain are at risk of depressed mood according to the severity or frequency of their pain. In addition we explored whether other potentially modifiable factors might increase the risk of depressed mood in these persons. METHODS: The study is a secondary analysis of baseline data for four hundred and six community-dwelling non-disabled people aged 65 and over registered with three group practices in suburban London who had experienced pain in the past 4 weeks. Intensity and frequency of pain was measured using 24 item Geriatric Pain Measure (GPM) and the presence of depressive symptoms using the 5 item Mental Health Inventory. Risk for social isolation was measured using the 6 item Lubben Social Network scale and instrumental activities of daily living (IADL) were also measured. RESULTS: Overall 76 (19%) had depressed mood. Pain frequency and severity were not statistically significantly associated with depressed mood in this population. In multivariate analyses, significant predictors of the presence of depressive symptoms were difficulties with basic ADLs (OR 2.8, 95% CI 1.1.7.8), risk for social isolation (OR 4.1, 95% CI 1.8-9.3), and basic education only (OR 2.2, 95% CI 1.1-4.4). CONCLUSION: Older people experiencing pain are also likely to experience depression. Among those experiencing pain, social network and functional status seem to be more important predictors of depressive symptoms than the severity of pain. Further studies should evaluate whether improvement of social network and functional status might reduce depressive symptoms in older patients.

Paediatric antiretroviral treatment programmes in sub-Saharan Africa: a review of published clinical studies

Knowledge of the experience and outcomes of current paediatric antiretroviral treatment (ART) programmes in sub-Saharan Africa can inform new programmes in the region as well as enhance existing ones. This is urgently needed to facilitate the scale-up of treatment, which is needed to address the burden of paediatric HIV cases on the continent. We reviewed the characteristics and outcomes of programmes with clinical paediatric ART studies published prior to 1 January 2008. The outcomes of the studies were comparable to similar ones from developed countries; however, the duration of follow-up was relatively limited in almost all the studies reviewed. One-year survival probability was between 84% and 91%, and considerable improvement in the clinical, immunologic and iral status of the paediatric patients was generally recorded. Loss to follow-up was less than 10% in all but two studies. Adherence to treatment was good and few adverse events were reported. This is despite the fact that many programmes were subject to enormous constraints in terms of health services, and despite widespread use of adult fixed-dose combinations for paediatric patients, including young infants. While the majority of children commencing ART were severely ill, most children were old (median age >5 years for almost all studies) with relatively few infants and young children (age <2 years) receiving treatment. This is in contrast to knowledge of rapid disease progression in the majority of HIV-infected infants and despite the World Health Organization’s recent recommendations to commence ART in all HIV-infected infants less than one year old. There is an urgent need to address barriers to ART for infants. Studies of the outcomes of programmes treating infants as well as those with longer-term follow-up are also needed.

Outcomes of antiretroviral treatment programmes in rural Lesotho: health centres and hospitals compared

Introduction: Lesotho was among the first countries to adopt decentralization of care from hospitals to nurse-led health centres (HCs) to scale up the provision of antiretroviral therapy (ART). We compared outcomes between patients who started ART at HCs and hospitals in two rural catchment areas in Lesotho. Methods: The two catchment areas comprise two hospitals and 12 HCs. Patients ≥16 years starting ART at a hospital or HC between 2008 and 2011 were included. Loss to follow-up (LTFU) was defined as not returning to the facility for ≥180 days after the last visit, no follow-up (no FUP) as not returning after starting ART, and retention in care as alive and on ART at the facility. The data were analysed using logistic regression, competing risk regression and Kaplan-Meier methods. Multivariable analyses were adjusted for sex, age, CD4 cell count, World Health Organization stage, catchment area and type of ART. All analyses were stratified by gender. Results: Of 3747 patients, 2042 (54.5%) started ART at HCs. Both women and men at hospitals had more advanced clinical and immunological stages of disease than those at HCs. Over 5445 patient-years, 420 died and 475 were LTFU. Kaplan-Meier estimates for three-year retention were 68.7 and 69.7% at HCs and hospitals, respectively, among women (p=0.81) and 68.8% at HCs versus 54.7% at hospitals among men (p<0.001). These findings persisted in adjusted analyses, with similar retention at HCs and hospitals among women (odds ratio (OR): 0.89, 95% confidence interval (CI): 0.73-1.09) and higher retention at HCs among men (OR: 1.53, 95% CI: 1.20-1.96). The latter result was mainly driven by a lower proportion of patients LTFU at HCs (OR: 0.68, 95% CI: 0.51-0.93). Conclusions: In rural Lesotho, overall retention in care did not differ significantly between nurse-led HCs and hospitals. However, men seemed to benefit most from starting ART at HCs, as they were more likely to remain in care in these facilities compared to hospitals.

Toward global prevention of sexually transmitted infections (STIs): The need for STI vaccines.

An estimated 499 million curable sexually transmitted infections (STIs; gonorrhea, chlamydia, syphilis, and trichomoniasis) occurred globally in 2008. In addition, well over 500 million people are estimated to have a viral STI such as herpes simplex virus type 2 (HSV-2) or human papillomavirus (HPV) at any point in time. STIs result in a large global burden of sexual, reproductive, and maternal-child health consequences, including genital symptoms, pregnancy complications, cancer, infertility, and enhanced HIV transmission, as well as important psychosocial consequences and financial costs. STI control strategies based primarily on behavioral primary prevention and STI case management have had clear successes, but gains have not been universal. Current STI control is hampered or threatened by several behavioral, biological, and implementation challenges, including a large proportion of asymptomatic infections, lack of feasible diagnostic tests globally, antimicrobial resistance, repeat infections, and barriers to intervention access, availability, and scale-up. Vaccines against HPV and hepatitis B virus offer a new paradigm for STI control. Challenges to existing STI prevention efforts provide important reasons for working toward additional STI vaccines. We summarize the global epidemiology of STIs and STI-associated complications, examine challenges to existing STI prevention efforts, and discuss the need for new STI vaccines for future prevention efforts.

SLR-derived terrestrial reference frame using the observations to LAGEOS-1/2, Starlette, Stella, and AJISAI

Currently, the contributions of Starlette, Stella, and AJISAI are not taken into account when defining the International Terrestrial Reference Frame (ITRF), despite the large amount of data collected in a long time-span. Consequently, the SLR-derived parameters and the SLR part of the ITRF are almost exclusively defined by LAGEOS-1 and LAGEOS-2. We investigate the potential of combining the observations to several SLR satellites with different orbital characteristics. Ten years of SLR data are homogeneously processed using the development version 5.3 of the Bernese GNSS Software. Special emphasis is put on orbit parameterization and the impact of LEO data on the estimation of the geocenter coordinates, Earth rotation parameters, Earth gravity field coefficients, and the station coordinates in one common adjustment procedure. We find that the parameters derived from the multi-satellite solutions are of better quality than those obtained in single satellite solutions or solutions based on the two LAGEOS satellites. A spectral analysis of the SLR network scale w.r.t. SLRF2008 shows that artifacts related to orbit perturbations in the LAGEOS-1/2 solutions, i.e., periods related to the draconitic years of the LAGEOS satellites, are greatly reduced in the combined solutions.