983 resultados para Natural-Gas Production
Resumo:
Työssä vertaillaan eri sähköntuotantovaihtoehtojen taloudellista kannattavuutta. Kannattavuusvertailu suoritetaan pelkkää sähköä tuottaville voimalaitoksille. Sähkön ja lämmön yhteistuotannon lisärakentaminen tulee kattamaan tietyn osuuden lähitulevaisuuden sähkön hankinnan vajeesta, mutta sen lisäksi tarvitaan myös uutta lauhdetuotantokapasiteettia. Tutkittavat voimalaitostyypit ovat: ydinvoimalaitos, maakaasukombilauhdevoimalaitos, kivihiililauhdevoimalaitos, turvelauhdevoimalaitos, puulauhdevoimalaitos ja tuulivoimala. Kannattavuustarkastelu suoritetaan annuiteettimenetelmällä käyttäen 5 % reaalikorkoa ja tammikuun 2008 hintatasoa. Laskelmien perusteella 8000 tunnin huipunkäyttöajalla ydinsähkön tuotantokustannus olisi 35,0 € /MWh, kaasusähkön 59,2 €/MWh ja hiilisähkön 64,4 €/MWh, kun hiilidioksidipäästöoikeuden hintana käytetään 23 €/t. Ilman päästökauppaa kaasusähkön hinta on 51,2 €/MWh ja hiilisähkön 45,7 €/MWh ydinsähkön hinnan pysyessä ennallaan. Herkkyystarkastelun tulosten perusteella ydinvoiman kilpailukyky korostuu muihin tarkasteltuihin tuotantomuotoihin verrattuna. Ydinpolttoaineen suurellakaan hinnan muutoksella ei ole merkittävää vaikutusta ydinsähkön tuotantokustannukseen, kun taas maakaasusähkö on erittäin riippuvainen polttoaineen hinnasta. Myös päästöoikeuden hinnan kasvu lisää merkittävästi ydinvoiman kilpailukykyä kaasu- ja hiilisähköön verrattuna. Ydinvoimainvestoinnin kannattavuutta ja takaisinmaksua tarkastellaan myös yksinään siten, että investoinnilla saavutettavien tuottojen laskennassa käytetään useita eri sähkön markkinahintoja. Investoinnin kannattavuus on erittäin hyvä, kun sähkön markkinahinta on 50 €/MWh tai suurempi.
Resumo:
The economical competitiveness of various power plant alternatives is compared. The comparison comprises merely electricity producing power plants. Combined heat and power (CHP) producing power will cover part of the future power deficit in Finland, but also condensing power plants for base load production will be needed. The following types of power plants are studied: nuclear power plant, combined cycle gas turbine plant, coal-fired condensing power plant, peat-fired condensing power plant, wood-fired condensing power plant and wind power plant. The calculations are carried out by using the annuity method with a real interest rate of 5 % per annum and with a fixed price level as of January 2008. With the annual peak load utilization time of 8000 hours (corresponding to a load factor of 91,3 %) the production costs would be for nuclear electricity 35,0 €/MWh, for gas based electricity 59,2 €/MWh and for coal based electricity 64,4 €/MWh, when using a price of 23 €/tonCO2 for the carbon dioxide emission trading. Without emission trading the production cost of gas electricity is 51,2 €/MWh and that of coal electricity 45,7 €/MWh and nuclear remains the same (35,0 €/MWh) In order to study the impact of changes in the input data, a sensitivity analysis has been carried out. It reveals that the advantage of the nuclear power is quite clear. E.g. the nuclear electricity is rather insensitive to the changes of nuclear fuel price, whereas for natural gas alternative the rising trend of gas price causes the greatest risk. Furthermore, increase of emission trading price improves the competitiveness of the nuclear alternative. The competitiveness and payback of the nuclear power investment is studied also as such by using various electricity market prices for determining the revenues generated by the investment. The profitability of the investment is excellent, if the market price of electricity is 50 €/MWh or more.
Resumo:
Law 15/2012 established in Spain four new environmental taxes and extended the scope objective excise duties on mineral oils to tax the use of natural gas and coal as sources of electricity. One of the newly created taxes falls on all electric power producers, and has as tax base the turnover. The second one tax hydropower production, and the other two fall on the nuclear industry. So, there are two new taxes in Spain on the production of electricity from nuclear sources. The first one is a tax on nuclear waste production; the second one is a tax on the storage of nuclear waste. However, these are not the only levies in the Spanish tax system affecting nuclear waste. At the State level there are already several charges on nuclear waste. At the regional level, on the other hand, two Autonomous Communities were taxing nuclear waste. The creation of these new State taxes will finish with the regional taxes, but the State will be oblige to compensate these regions for losing revenues. The purpose of this work is to carry out a critical analysis of the Spanish system of taxation on nuclear waste.
Resumo:
Nitrogen content in natural gas was studied in experimental and computational investigations to identify its influence on the emission level of exhaust gases from combustion facilities. Changes in natural gas composition with different N2 concentrations may result from introducing a new source gas into the system. An industrial burner fired at 75 kW, housed in a laboratory-scale furnace, was employed for runs where the natural gas/N2 proportion was varied. The exhaust and in-furnace measurements of temperature and gas concentrations were performed for different combustion scenarios, varying N2 content from 1-10 %v. Results have shown that the contamination of natural gas with nitrogen reduced the peak flame temperature, the concentration of unstable species, the NO X emission level and the heat transfer rate to the furnace walls, resulting from the recombination reactions.
Resumo:
Increasing natural gas use in Brazil triggered a discussion of its role as a Hg source. We show that Hg emissions to the atmosphere from fossil fuel combustion for power generation in Brazil contribute with 6.2% (4.2 t yr-1) to the total anthropogenic Hg atmospheric emissions, with coal combustion and biomass burning as major sources. Natural gas contributes with 0.04 t yr-1, mostly from electricity generation (88%) and industrial uses (7.6%). Preliminary results on Hg concentrations in natural gas suggest that a large fraction of it is trapped during refining and transport, which may create Hg point sources between extraction and consumption.
Resumo:
El Hospital Punta de Europa en Algeciras (Cádiz), centro sanitario del Servicio Andaluz de Salud, desea optimizar la gestión de sus instalaciones de generación de energía térmica (vapor, agua caliente sanitaria y agua caliente de calefacción) y adecuarlas a la normativa vigente así como la sustitución de bajantes del edificio, para lo cual sacará a concurso público la licitación para la concesión de dominio público de dichas instalaciones. Para definir el alcance y condiciones de la citada concesión, el Hospital Punta de Europa (Algeciras) del Servicio Andaluz de Salud ha solicitado a Pedro Alonso Martín el estudio para la reforma y adecuación de las instalaciones productoras de energía térmica del citado Hospital. El objetivo principal de este trabajo es hacer un estudio, propuesta y valoración de las actuaciones necesarias para la reforma y mejora de la explotación de las instalaciones generadoras de energía térmica y de la red saneamiento interior del Hospital Punta de Europa de Algeciras (Cádiz). Las actuales instalaciones de generación térmica consumidoras de energía del hospital dentro del alcance de este Proyecto son: Generación de vapor (lavandería y esterilización). Producción de agua caliente sanitaria (ACS). Producción de agua caliente de calefacción. La mayoría de los equipos productores de energía datan del año 1975, por lo que en la mayoría de los casos se ha cumplido su plazo de amortización y periodo de vida útil. Se hace necesaria la instalación de gas natural, debido a que se tendrá que abastecer a todas las calderas de la central térmica. El diseño del sistema de producción de agua caliente sanitaria garantiza el máximo confort y economía del usuario, compatible con el máximo ahorro energético y la protección del medio ambiente, cubriendo las necesidades de agua caliente sanitaria mediante la combinación de un sistema de calderas a gas con los colectores solares.
Resumo:
Non-renewable biomass, such as coal, oil and natural gas are not only energy sources but also important starting materials for the production of a variety of chemicals ranging from gasoline, diesel oil and fine chemicals. In this regard, carbohydrates, the most abundant class of enantiopure organic compounds, are very suitable for generation of chemicals of great practical value. Their bulk-scale availability associated with low cost make them unique starting materials for organic preparative purpose. They are a most attractive alternative for construction of enantiopure target molecules by asymmetric synthesis. This review addresses, in addition to the use of low molecular weight carbohydrates, issues related to renewable biomass from photosynthesis and alternatives for the production of bulk and fine chemicals.
Resumo:
The evaluation of uncertainty associated with an analytic result is an essential part of the measurement process. Recently, several approaches to evaluate the uncertainty in measurement have been developed. Here, the gas chromatography assay uncertainty for natural gas is compared by some of these approaches: the guide to the expression of uncertainty in measurement (GUM) approach, top-down approach (reproducibility estimate from an inter-laboratory study), Barwick & Ellison (data from validation), study of variability and fuzzy approach. The comparison shows that GUM, Barwick & Ellison and fuzzy approaches lead to comparable uncertainty evaluations, which does not happen with the top-down approach and study of variability by the absence of data normality.
Resumo:
Although the production of liquid fuels from coal, natural gas (CTL and GTL processes) and other carbon sources has been discovered 90 years ago, the interest was renewed in the last years motivated by stranded gas reserves and by petroleum market instability. This review intends to show the scenario of these technologies nowadays, discussing the applied technologies, the steps in an industrial plant, the ways to produce syngas and liquid fuels, the catalysts used, the type of reactors and the operating plants with their respective capacities, besides the technical, economical and environmental viability, challenges and perspectives for Brazil.
Resumo:
This contribution discusses the state of the art and the challenges in producing biofuels, as well as the need to develop chemical conversion processes of CO2 in Brazil. Biofuels are sustainable alternatives to fossil fuels for providing energy, whilst minimizing the effects of CO2 emissions into the atmosphere. Ethanol from fermentation of simple sugars and biodiesel produced from oils and fats are the first-generation of biofuels available in the country. However, they are preferentially produced from edible feedstocks (sugar cane and vegetable oils), which limits the expansion of national production. In addition, environmental issues, as well as political and societal pressures, have promoted the development of 2nd and 3rd generation biofuels. These biofuels are based on lignocellulosic biomass from agricultural waste and wood processing, and on algae, respectively. Cellulosic ethanol, from fermentation of cellulose-derived sugars, and hydrocarbons in the range of liquid fuels (gasoline, jet, and diesel fuels) produced through thermochemical conversion processes are considered biofuels of the new generation. Nevertheless, the available 2nd and 3rd generation biofuels, and those under development, have to be subsidized for inclusion in the consumer market. Therefore, one of the greatest challenges in the biofuels area is their competitive large-scale production in relation to fossil fuels. Owing to this, fossil fuels, based on petroleum, coal and natural gas, will be around for many years to come. Thus, it is necessary to utilize the inevitable CO2 released by the combustion processes in a rational and economical way. Chemical transformation processes of CO2 into methanol, hydrocarbons and organic carbonates are attractive and relatively easy to implement in the short-to-medium terms. However, the low reactivity of CO2 and the thermodynamic limitations in terms of conversion and yield of products remain challenges to be overcome in the development of sustainable CO2 conversion processes.
Resumo:
Coal, oil, natural gas, and shale gas are biomass that is formed millions of years ago. These are non-renewable and depleting, even considering the recent discovery of new sources of oil in the presalt and new technologies for the exploitation of shale deposits. Currently, these raw materials are used as a source of energy production and are also important for the production of fine chemicals. Since these materials are finite and their (oil) price is increasing, it is clear that there will be a progressive increase in the chemical industry to use renewable raw materials as a source of energy, an inevitable necessity for humanity. The major challenge for the society in the twenty first century is to unite governments, universities, research centers, and corporations to jointly act in all areas of science with one goal of finding a solution to global problems, such as conversion of biomass into compounds for the fine chemical industry.Non-renewable raw materials are used in the preparation of fuels, chemical intermediates, and derivatives for the fine chemical industry. However, their stock in nature has a finite duration, and their price is high and will likely increase with their depletion. In this scenario, the alternative is to use renewable biomass as a replacement for petrochemicals in the production of fine chemicals. As the production of biomass-based carbohydrates is the most abundant in nature, it is judicious to develop technologies for the generation of chain products (fuels, chemical intermediates, and derivatives for the fine chemicals industry) using this raw material. This paper presents some aspects and opportunities in the area of carbohydrate chemistry toward the generation of compounds for the fine chemical industry.
Resumo:
Coal, natural gas and petroleum-based liquid fuels are still the most widely used energy sources in modern society. The current scenario contrasts with the foreseen shortage of petroleum that was spread out in the beginning of the XXI century, when the concept of "energy security" emerged as an urgent agenda to ensure a good balance between energy supply and demand. Much beyond protecting refineries and oil ducts from terrorist attacks, these issues soon developed to a portfolio of measures related to process sustainability, involving at least three fundamental dimensions: (a) the need for technological breakthroughs to improve energy production worldwide; (b) the improvement of energy efficiency in all sectors of modern society; and (c) the increase of the social perception that education is a key-word towards a better use of our energy resources. Together with these technological, economic or social issues, "energy security" is also strongly influenced by environmental issues involving greenhouse gas emissions, loss of biodiversity in environmentally sensitive areas, pollution and poor solid waste management. For these and other reasons, the implementation of more sustainable practices in our currently available industrial facilities and the search for alternative energy sources that could partly replace the fossil fuels became a major priority throughout the world. Regarding fossil fuels, the main technological bottlenecks are related to the exploitation of less accessible petroleum resources such as those in the pre-salt layer, ranging from the proper characterization of these deep-water oil reservoirs, the development of lighter and more efficient equipment for both exploration and exploitation, the optimization of the drilling techniques, the achievement of further improvements in production yields and the establishment of specialized training programs for the technical staff. The production of natural gas from shale is also emerging in several countries but its production in large scale has several problems ranging from the unavoidable environmental impact of shale mining as well as to the bad consequences of its large scale exploitation in the past. The large scale use of coal has similar environmental problems, which are aggravated by difficulties in its proper characterization. Also, the mitigation of harmful gases and particulate matter that are released as a result of combustion is still depending on the development of new gas cleaning technologies including more efficient catalysts to improve its emission profile. On the other hand, biofuels are still struggling to fulfill their role in reducing our high dependence on fossil fuels. Fatty acid alkyl esters (biodiesel) from vegetable oils and ethanol from cane sucrose and corn starch are mature technologies whose market share is partially limited by the availability of their raw materials. For this reason, there has been a great effort to develop "second-generation" technologies to produce methanol, ethanol, butanol, biodiesel, biogas (methane), bio-oils, syngas and synthetic fuels from lower grade renewable feedstocks such as lignocellulosic materials whose consumption would not interfere with the rather sensitive issues of food security. Advanced fermentation processes are envisaged as "third generation" technologies and these are primarily linked to the use of algae feedstocks as well as other organisms that could produce biofuels or simply provide microbial biomass for the processes listed above. Due to the complexity and cost of their production chain, "third generation" technologies usually aim at high value added biofuels such as biojet fuel, biohydrogen and hydrocarbons with a fuel performance similar to diesel or gasoline, situations in which the use of genetically modified organisms is usually required. In general, the main challenges in this field could be summarized as follows: (a) the need for prospecting alternative sources of biomass that are not linked to the food chain; (b) the intensive use of green chemistry principles in our current industrial activities; (c) the development of mature technologies for the production of second and third generation biofuels; (d) the development of safe bioprocesses that are based on environmentally benign microorganisms; (e) the scale-up of potential technologies to a suitable demonstration scale; and (f) the full understanding of the technological and environmental implications of the food vs. fuel debate. On the basis of these, the main objective of this article is to stimulate the discussion and help the decision making regarding "energy security" issues and their challenges for modern society, in such a way to encourage the participation of the Brazilian Chemistry community in the design of a road map for a safer, sustainable and prosper future for our nation.
Resumo:
Diplomityössä on selvitetty Etelä-Karjalan maakunnan energian käyttöä nyt ja tulevaisuudessa. Tavoitteena on selvittää eri energialähteiden hankintavaihtoehtoja, sekä eri energialähteiden käytön kehittymissuunnat seuraavan 10 - 20 vuoden kuluessa. Diplomityö on tehty Etelä-Karjalan liiton toimeksiannosta ja sitä tullaan käyttämään taustaselvityksenä maakuntakaavan laadinnassa sekä maakunnan aluevarauksia määriteltäessä. Tarkoituksena on arvioida miten energiahuollon rakenne tulee muuttumaan tulevaisuudessa ja mikä merkitys tulevaisuuden energiaratkaisuilla on alueiden käyttöön ja aluerakenteeseen liittyen. Etelä-Karjala on osa Euroopan suurinta metsäteollisuuskeskittymää ja maakunta on Suomen suurimpia teollisuuden energian- ja sähkönkäyttäjiä. Etelä-Karjalan vahva metsäteollisuus ja sen käyttämät puupolttoaineet sekä sijainti Venäjän maakaasuvarojen läheisyydessä ja kattava maakaasuverkko vaikuttavat merkittävästi maakunnan energiataseeseen. Vuonna 2007 Etelä-Karjalan primäärienergiankäyttö oli 24,3 TWh, tästä uusiutuvien energialähteiden osuus oli 68 % ja fossiilisten energialähteiden osuus 22 %. Etelä-Karjalan energiatalouden tulevaisuuteen vaikuttaa merkittävästi maakunnan metsäteollisuuden tulevaisuus. Tiukentuvan energia- ja ilmastopolitiikan ja ympäristömääräysten myötä maakunnan energiatehokkuutta on parannettava kaikilla sektoreilla. Maakunnan energiankulutusta voidaan vähentää tehostamalla energiantuotantoa, tiivistämällä yhdyskuntarakennetta ja lisäämällä bioenergian käyttöä energiantuotannossa. Etelä-Karjalassa on myös potentiaalia lisätä vaihtoehtoisten energialähteiden osuutta maakunnan energiatalouden tulevaisuudessa.
Resumo:
Tämä diplomityö on tehty Aalto yliopiston Teknillisen korkeakoulun Lahden keskuksen IMMU-hankkeeseen. Teoriaosassa tarkastellaan kaukolämmityksen nykytilannetta ja sen tulevai-suuteen vaikuttavia tekijöitä. Työssä on tarkasteltu Lahti Energia Oy:n Kymijärven voimalaitosalueen kehittämismahdollisuuksia vuosina 2012 ja 2016. Vertailukohtana käytetään nykytilannetta vuoden 2009 tiedoilla. Työssä on selvitetty voimalaitosalueen elinkaaren aikaisia kasvihuonekaasupäästöjä ja niiden muutoksia mahdollisten uusien voimalaitosinvestointien myötä. Vuonna 2012 alueelle rakennetaan kiinteää polttoainetta käyttävä kaasutusvoimalaitos jolloin nykyisen laitoksen käyttö ja samalla kivihiilen käyttö vähenee huomattavasti. Tässä työssä vuoden 2016 skenaariossa alueelle ajatellaan rakennettavan kolmas voimalaitos, maakaasukäyttöinen kaasukombiturbiini. Tarkasteluissa energiantuotantomäärien oletetaan pysyvän nykytilanteen suuruisina. Työssä tarkasteltujen skenaarioiden perusteella alueen yhdistetyn kaukolämmön- ja sähköntuotannon (CHP) päästöjä voitaisiin vähentää vuonna 2012 noin 20 % ja vuonna 2016 noin 30 % nykytilanteesta. Esitettyjen investointien riskinä on sopivan polttoaineen saatavuus ja riittävyys. Lisäksi työssä tarkasteltiin kaasutusvoimalaitoksen ja kaasukombiturbiinin takaisinmaksuaikoja. Kierrätyspolttoaineen hinnan kallistuminen hinnasta 5 €/MWh hintaan 15 €/MWh vaikutti kaasutusvoimalaitoksen takaisinmaksuaikaan yhdeksällä vuodella. Kaasukombiturbiinin takaisinmaksuaika piteni tämän hetkiseen maakaasun hintaan 27 €/MWh verrattuna päästöoikeuden lisäkustannus 6 €/MWh huomioiden kahdeksan vuotta. Takaisinmaksuaikaan vaikuttaa muun muassa polttoaineen hinta ja laitoksen huipunkäyttöaika.
Resumo:
Tämä diplomityö on tehty IMMU-hankkeeseen, jossa selvitetään konkreettisia keinoja ilmastonmuutoksen hillintään Lahden seudulla. Diplomityössä tarkastellaan mahdollisuuksia lisätä biopolttoaineita pienen kokoluokan kaukolämmön tuotantolaitoksissa. Teoria osuuden pohjalta luodaan skenaariot Nastolaan ja Vääksyyn (Asikkala). Skenaarioissa tarkastellaan biopolttoaineiden lisäämisen vaikutuksia kasvihuonekaasu- ja hiukkaspäästöihin käyttämällä elinkaariarviointimenetelmää. Taloudellisia seikkoja tarkastellaan laskemalla takaisinmaksuaikoja eri biolaitosratkaisuille nettonykyarvomenetelmällä. Tutkimuksen tuloksena saatiin, että kasvihuonekaasupäästöt tuotannon elinkaaren ajalta vähenevät eniten tuottamalla kaukolämmön perustuotanto Nastolassa ja Vääksyssä bio-CHP-laitoksella haketta polttamalla. Kiinteitä biopolttoaineita poltettaessa tulevat kuitenkin suurimmat hiukkaspäästöt, mikä vaikuttaa asuinympäristön viihtyvyyteen tuotantolaitoksen läheisyydessä. Bio-CHP-laitoksen investointikustannukset ovat suurimmat ja takaisinmaksuaika pisin. Nastolan kulutusperusteisiä päästöjä pystytään vähentämään eniten investoimalla biolämpölaitokseen tai bio-CHP-laitokseen. Päästöjä Nastolassa pystyttäisiin kyseisillä investoinneilla vähentämään enimmillään 6,4 %. Lahti energian kokonaispäästöjä pystyttäisiin enimmillään vähentämään noin 1,6 %. Johtopäätöksenä tutkimuksesta voidaan sanoa, että kasvihuonekaasupäästöjä pystytään vähentämään investointien avulla. Toiset ratkaisut ovat vain kalliimpia kuin toiset. Lisäksi kiinteitä biopolttoaineita käytettäessä jotkut poltto-ominaisuudet voivat heiketä esim. verrattuna maakaasun polttoon. Biopolttoaineiden lisäämisellä kuitenkin päästään irti riippuvuudesta fossiilisiin polttoaineisiin kuten öljyyn ja maakaasuun. Investointeja tehdessä on vaikea sanoa suoraan, mikä vaihtoehto on paras tapa tuottaa kaukolämpöä. Investointipäätöksiä tehdessä päätökseen vaikuttaa se, mitä tuotannon ominaispiirteitä painotetaan eniten.