Insights into the morphology of the Serra da Cangalha impact structure from geophysical modeling

Forward modeling is commonly applied to gravity field data of impact structures to determine the main gravity anomaly sources. In this context, we have developed 2.5-D gravity models of the Serra da Cangalha impact structure for the purpose of investigating geological bodies/structures underneath the crater. Interpretation of the models was supported by ground magnetic data acquired along profiles, as well as by high resolution aeromagnetic data. Ground magnetic data reveal the presence of short-wavelength anomalies probably related to shallow magnetic sources that could have been emplaced during the cratering process. Aeromagnetic data show that the basement underneath the crater occurs at an average depth of about 1.9 km, whereas in the region beneath the central uplift it is raised to 0.51 km below the current surface. These depths are also supported by 2.5-D gravity models showing a gentle relief for the basement beneath the central uplift area. Geophysical data were used to provide further constraints for numeral modeling of crater formation that provided important information on the structural modification that affected the rocks underneath the crater, as well as on shock-induced modifications of target rocks. The results showed that the morphology is consistent with the current observations of the crater and that Serra da Cangalha was formed by a meteorite of approximately 1.4 km diameter striking at 12 km s-1.

Pollen morphology of the genus Eremanthus Less. (Vernonieae, Asteraceae)

(Pollen morphology of the genus Eremanthus Less. (Vernonieae, Asteraceae)). In order to evaluate the significance of the pollen morphology for generic and infrageneric taxonomy of the genus Eremanthus (Vernonieae, Asteraceae), and to provide additional data for its phylogenetic reconstruction, the pollen of 20 of the 23 species of the genus was examined using light and scanning electron microscopy. Acetolysed pollen grains were measured, described, and illustrated using light microscopy, while non-acetolysed pollen grains were analyzed using scanning electron microscopy. Pollen grains of these species are isopolar, oblate-spheroidal in most of the species, more rarely prolate spheroidal or suboblate, subtriangular amb, tricolporate and subechinolophate. The variation among quantitative characters does not correlate with the macromorphological subdivision of the genus or with the generic or specific limits.

Germination and seedling morphology of four South American Smilax (Smilacaceae)

Species of Smilax,, also known as greenbrier, are widely distributed in Brazil and their commercial trades are carried out by the extractivism of native species. We the aim to provide information about the germination and development of seedlings in four Smilax species, different experiments were developed under controlled conditions. We evaluated two germination treatments: temperature (30 degrees C and 20-30 degrees C) and light (presence/absence), and for few cases the tetrazolium treatment was applied. A different treatment response was observed among the studied species. Light had a significant influence in S. brasiliensis, with the highest germination rates at 20-30 C in dark conditions. S. campestris showed significant differences among temperature treatments, but not to light; while S. cissoides showed high germination rates (66-78%), independently of treatment. However, S. polyantha had low germination rates (19-24%). After one year, the expanded leaves showed different characteristics among the studied species. Leaves of S. brasiliensis were ovate, coriaceous, three main veins and prickle-like structures only on the midrib on abaxial face. S. campestris leaves were oblong, coriaceous and prickle-like structures were located at the leaf midrib and margin. S. cissoides had ovate-elliptic, membranaceous leaves, with three main veins with prickle-like structures on the abaxial face. S. polyantha leaves showed ovate-elliptic. coriaceous leaves, with three main veins, translucent secondary veins and no prickle-like structures. A seedling identification key was elaborated based on morphological characteristics. Rev. Biol. Trop. 60 (1): 495-504. Epub 2012 March 01.

Viability, production and morphology of pollen grains for different species in the genus Manihot (Euphorbiaceae)

(Viability, production and morphology of pollen grains for different species in the genus Manihot (Euphorbiaceae)). The objective of this work was to characterize the viability, production and morphology of pollen for different species in the genus Manihot. Floral buds from Manihot accessions were collected from two germplasm banks at Embrapa Cassava & Fruits. The viability of the pollen was assessed via colorimetric, in vitro and in vivo assays. The diameter of the pollen grains was determined by measuring the transversal length of the grain. The experimental design was entirely randomized. Studies on pollen ultrastructure were performed via scanning electron microscopy. Pollen viability was high in the colorimetric tests and intermediate in vivo tests; there was no germination in the in vitro tests. The average production for all accessions was 1,253 pollen grains per floral bud. The size of the pollen grains varied from 132 to 163 pm in the wild accessions, and 129 to 146 pm in the cultivated accessions. The pollen grains for all accessions were very large, apolar, spherical as well as inaperturate, with an exine ornamented with pila organized in a Croton pattern. The wild accessions, in general, produced more and larger pollen grains compared with the cultivated accessions.

Root and Root Canal Morphology of Four-rooted Maxillary Second Molars: A Micro-Computed Tomography Study

Introduction: This study examined the anatomy of 4-rooted maxillary second molars by using micro computed tomography. Methods: Twenty-five 4-rooted maxillary second molars were scanned to evaluate the size and curvature of the roots; the distance and spatial configuration between some anatomical landmarks; the number of root canals and the position of apical foramina; the occurrence of fusion of roots and enamel pearls; the configuration of the canal at the apical third; the cross-sectional appearance, the volume, and surface area of the root canals. Data were compared by using analysis of variance post hoc Tukey test (alpha = 0.05). Results: The specimens were classified as types I (n = 16), II (n = 7), and III (n = 2). The size of the roots was similar (P > .05), and most of them presented straight with 1 canal, except the mesiobuccal that showed 2 canals in 24% of the samples. The configuration of the pulp chamber was mostly irregular quadrilateral-shaped. The lowest mean distance of the orifices was observed between the buccal roots (P < .05). Accessory canals were present mostly in the apical third. Location of the apical foramina varied considerably. Fusion of roots and enamel pearls occurred in 44% and 8% of the samples, respectively. Mean distance from the pulp chamber floor to the furcation was 2.15 +/- 0.57 mm. No statistical differences were found in the bi-dimensional and 3-dimensional analyses (P > .05). Conclusions: All analyzed parameters showed differences between roots, except for the length of the roots, the configuration of the canals at the apical third, cross-sectional appearance, volume, and surface area of the canals. (J Endod 2012;38:977-982)

New species of Fissiphallius Martens 1988 from Brazil and notes on the morphology of Fissiphalliidae (Arachnida, Opiliones)

The seventh species of Fissiphallidae, Fissiphallius orube sp. nov., and the fourth from Brazil (type locality state of Acre, Cruzeiro do Sul, at the Moa river), is described. The new species differs from the remaining species of the family in lacking a pergula, having a knob at the base of the rutrum, and the ocularium spiniform projection with apical portion single or divided in two to three parts.

Ontogenetic and evolutionary change of external morphology of the neotropical shrimp potimirim (Holthuis, 1954) explained by a molecular phylogeny of the genus

A phylogenetic analysis of a fragment of the mitochondrial gene 16S was used to test the monophyletic status of Potimirim. Existing doubts on the taxonomic status of brasiliana (once P glabra) and P potimirim (once P mexicana) were clarified. Potimirim mexicana and P potimirim are distinct species according to molecular data and appendix masculina morphology. A new species (Potimirim sp. 1) from Puerto Rico was revealed with molecular data, and it is evolutionarily related to P potimirim and P mexicana according to our analysis. We found out three distinct species under the name P glabra. Then, we recommend the application of the name P glabra for the populations of the Pacific slope of Central America and revalidation of P brasiliana for the Brazilian ones. The need for a new name to those "P glabra" of the Caribbean is highlighted, and it was provisionally referred as Potimirim sp. 2. The ontogenetic (juveniles to adults) development of the appendix masculina of P brasiliana was observed and compared to the other species of Potimirim (adults). In the light of our phylogenetic hypothesis, we postulate a pattern of character addition for the evolution of the appendix masculina of Potimirim. This hypothesis is plausible for two key reasons. First. Potimirim is a monophyletic group according to our hypothesis. Second, the shape of appendix masculina found in adults of P. americana is similar and comparable to those found in the earliest juvenile stages of P brasiliana, a derived species according to our phylogeny (P americana, ((P mexicana, Potimirim sp. 1. P potimirim), (P glabra, (brasiliana, Potimirim sp. 2)))). As so, the basal P americana retain the ancestral morphological state of the appendix masculina when compared to the other species of Potimirim. In our interpretation the ontogeny of the appendix masculina recapitulated the proposed phylogeny, giving further support to it.

Gross morphology of rhea oropharyngeal cavity

The rhea (Rhea americana americana) is an american bird belonging to Ratite's family. Studies related to its morphology are still scarce. This study aims to describe the macroscopic structures of the oropharyngeal cavity. Five heads (2 to 6 months old) formalin preserved were anatomically dissected to expose the oropharynx. The oropharynx of the rhea was "bell-shaped" composed by the maxillary and mandibular rhamphotheca. The roof and floor presented two distinct regions different in colour of the mucosa. The rostral region was pale pink contrasting to grey coloured caudal region. The median longitudinal ridge extended rostrally from the apex of the choana to the tip of the beak in the roof and it is clearly more prominent and rigid than the homolog in the floor that appeared thin and stretched merely along the rostral portion of the regio interramalis. The floor was formed by the interramal region, (regio interramalis) tongue and laryngeal mound containing glove-shaped glottis. This study confirmed the basic morphology of the oropharinx of the rhea. However, important morphological information not previously described is highlighted and contradictory information present in the literature is clarified.

Genital morphology of the male South American fur seal (Arctocephalus australis) and biological implications

Male capacity for spreading genes to a great number of descendents and to determine population dynamics depend directly on the genital organs. Morphological studies in pinnipeds are scarce and the functional meaning of some characteristics has never been discussed. We hypothesized that Arctocephalus australis (A. australis) shows morphophysiological adaptations in order to guarantee the perpetuation of the species in the unique annual mating season. Seven males, dead from natural causes, had their genital organs collected and fixed for morphological description. Some features differ from other described mammalian males and are closely related to the biology and reproductive cycle of this species, as the scrotal epidermis, absence of glandular portion in the ductus deferens and spermatogenic epithelium suggest a recrudescent testis period. The corona glandis exhibits a singular arrangement: its erectile border looks like a formation of petals and its association with the os penis gives a "lily-flower" form to this region. We propose the name margo petaliformis to this particular erectile border of the corona glandis because of its similarity to a flower corola. The male genital organs of A. australis show morphological features compatible with adaptation to environment requirements and reproductive efficiency.

Morphology of accessory genital glands of spotted paca(Agouti paca Linnaeus, 1766)

The spotted paca is the second largest rodent in Brazil, where it is of great economic interestin impoverished regions in view of its prominence as a low-cost source of protein. Littleis known about the morphology of the accessory genital glands of this species. Thus, westudied the position and morphology of the genitals in ten adult male spotted pacas. Theanimals were divided into two groups, five animals were used for fixing of samples in 10%aqueous formaldehyde for macroscopic studies and the other five animals were designatedfor microscopic analysis. These were arranged in pairs and had the vesicular, prostate,coagulating and bulbourethral glands identified, being structured as mucous glands, whichlead into the pelvic urethra. It was concluded that the accessory genital glands found in thepaca are the same as those found in most rodents, showing similar histological aspects

Effects of trophic levels (chlorophyll and phosphorous content) in three different water bodies (urban lake, reservoir and aquaculture facility) on gill morphology of Nile tilapia (Oreochromis niloticus)

Histological and ultrastructural analyses of gills were observed in Nile tilapia collected from three different waterbodies in southeast Brazil: an urban lake in a park in the city of São Paulo, a reservoir in a rural city, and a commercial aquaculture facility. These aterbodies were analyzed and classified as hypereutrophic, eutrophic, and supereutrophic, respectively, with 310.00, 94.00, 28.00 of phosphate (PO2_ 4 lg L _1) and 65.49, 24.95, 12.83 of chlorophyll (lg L _1). A significant difference in the histological alterations index (HAI) was observed only in fish from the urban lake, with the presence of cell hypertrophy, hyperplasia, aneurism, and other alterations. When compared to the other groups, a large quantity of rodlet cells was also observed in the urban group. These results demonstrate the correlation of eutrophic states of water with gill morphology. Also discussed is the premise that large amounts of organic material dissolved in water can alter the morphology of the fish gills

The evolutionary implications of hemipenial morphology of rattlesnake Crotalus durissus terrificus (Laurent, 1768) (Serpentes: Viperidae: Crotalinae)

Most amniotes vertebrates have an intromittent organ to deliver semen. The reptile Sphenodon and most birds lost the ancestral penis and developed a cloaca-cloaca mating. Known as hemipenises, the copulatory organ of Squamata shows unique features between the amniotes intromittent organ. They are the only paired intromittent organs across amniotes and are fully inverted and encapsulated in the tail when not in use. The histology and ultrastructure of the hemipenes of Crotalus durissus rattlesnake is described as the evolutionary implications of the main features discussed. The organization of hemipenis of Crotalus durissus terrificus in two concentric corpora cavernosa is similar to other Squamata but differ markedly from the organization of the penis found in crocodilians, testudinata, birds and mammals. Based on the available data, the penis of the ancestral amniotes was made of connective tissue and the incorporation of smooth muscle in the framework of the sinusoids occurred independently in mammals and Crotalus durissus. The propulsor action of the muscle retractor penis basalis was confirmed and therefore the named should be changed to musculus hemipenis propulsor.The retractor penis magnus found in Squamata has no homology to the retractor penis of mammals, although both are responsible for the retraction of the copulatory organ

Morphology of leds by atomic force microscopy

The concern of this work is to present the characterization of blue emitting GaN-based LED structures by means of Atomic Force Microscopy. Here we show a comparison among the samples with different dislocation densities, in order to understand how the dislocations can affect the surface morphology. First of all we have described the current state of art of the LEDs in the present market. Thereafterwards we have mentioned in detail about the growth technique of LED structures and the methodology of the characterization employed in our thesis. Finally, we have presented the details of the results obtained on our samples studied, followed by discussions and conclusions. L'obiettivo di questa tesi é quello di presentare la caratterizzazione mediante Microscopia a Forza Atomica di strutture di LED a emissione di luce blu a base di nitruro di gallio (GaN). Viene presentato un confronto tra campioni con differente densità di dislocazioni, allo scopo di comprendere in che modo la presenza di dislocazioni influisce sulla morfologia della superficie. Innanzitutto, viene descritto il presente stato dell'arte dei LED. Successivamente, sono forniti i dettagli riguardanti la tecnica di crescita delle strutture dei LED e il metodo di caratterizzazione adottato. Infine, vengono mostrati e discussi i risultati ottenuti dallo studio dei campioni, seguiti dalle conclusioni.

Crystallization and morphology of the PLLA phase within random poly (L-lactide-ran-ɛ-caprolactone)

This work has mainly focused on the poly (L-lactide) (PLLA) which is a material for multiple applications with performances comparable to those of petrochemical polymers (PP, PS, PET, etc. ...), readily recyclable and also compostable. However, PLLA has certain shortcomings that limit its applications. It is a brittle, hard polymer with a very low elongation at break, hydrophobic, exhibits low crystallization kinetics and takes a long time to degrade. The properties of PLLA may be modified by copolymerization (random, block, and graft) of L-lactide monomers with other co-monomers. In this thesis it has been studied the crystallization and morphology of random copolymers poly (L-lactide-ran-ε-caprolactone) with different compositions of the two monomers since the physical, mechanical, optical and chemical properties of a material depend on this behavior. Thermal analyses were performed by differential scanning calorimetry (DSC) and thermogravimetry (TGA) to observe behaviors due to the different compositions of the copolymers. The crystallization kinetics and morphology of poly (L-lactide-ran-ε-caprolactone) was investigated by polarized light optical microscopy (PLOM) and differential scanning calorimetry (DSC). Their thermal behavior was observed with crystallization from melt. It was observed that with increasing amounts of PCL in the copolymer, there is a decrease of the thermal degradation. Studies on the crystallization kinetics have shown that small quantities of PCL in the copolymer increase the overall crystallization kinetics and the crystal growth rate which decreases with higher quantities of PCL.

Early effects of carbachol on the morphology of motor endplates of mammalian skeletal muscle fibers

Long-term disturbance of the calcium homeostasis of motor endplates (MEPs) causes necrosis of muscle fibers. The onset of morphological changes in response to this disturbance, particularly in relation to the fiber type, is presently unknown. Omohyoid muscles of mice were incubated for 1-30 minutes in 0.1 mM carbachol, an acetylcholine agonist that causes an inward calcium current. In these muscles, the structural changes of the sarcomeres and the MEP sarcoplasm were evaluated at the light- and electron-microscopic level. Predominantly in type I fibers, carbachol incubation resulted in strong contractures of the sarcomeres underlying the MEPs. Owing to these contractures, the usual beret-like form of the MEP-associated sarcoplasm was deformed into a mushroom-like body. Consequently, the squeezed MEPs partially overlapped the adjacent muscle fiber segments. There are no signs of contractures below the MEPs if muscles were incubated in carbachol in calcium-free Tyrode's solution. Carbachol induced inward calcium current and produced fiber-type-specific contractures. This finding points to differences in the handling of calcium in MEPs. Possible mechanisms for these fiber-type-specific differences caused by carbachol-induced calcium entry are assessed.