Influence of ammonium chloride feeding time and light intensity on the cultivation of Spirulina (Arthrospira) platensis

This study dealt with the influence of both the feeding time and light intensity on the fed-batch culture of the cyanobacterium Spirulina (Arthrospira) platensis using ammonium chloride as a nitrogen source. For this purpose, a 2 2 plus star central composite experimental design combined with response surface methodology was employed, and the maximum cell concentration (X-m), the cell productivity (P-X), and the yield of biomass on nitrogen (Y-X/N) were selected as the response variables. The optimum values of X-m (1,833 mgL(-1)) and Y-X/N (5.9 gg(-1)) estimated by the model at light intensity of 13 klux and feeding time of 17.2 days were very close to those obtained experimentally under these conditions (X-m = 1,771 +/- 41 mg L-1; Y-X/N = 5.7 +/- 0.17 gg(-1)). The cell productivity was a decreasing function of the ammonium chloride feeding time and a quadratic function of the light intensity. The protein and lipid contents of dry biomass collected at the end of cultivations were shown to decrease with increasing light intensity.

Bioreduction of Acetophenone Derivatives by Red Marine Algae Bostrychia radicans and B. tenella, and Marine Bacteria Associated

The biocatalytic reduction of acetophenone derivatives was exploited by using algal biomass from Bostrychia radicans and B. tenella producing exclusively (S)-2-phenylethanols with high enantiomeric excess (> 99% ee). Bacterial populations associated with algal biomass were identified as the Bacillus genus. This report deals with the first investigations involving the use of marine bacteria associated with B. radicans and B. tenella marine algae for the biocatalytic reduction of acetophenone derivatives.

Changes in quantum efficiency of Photosystem II of symbiotic dinoflagellates of corals after heat stress, and of bleached corals sampled after the 1998 Great Barrier Reef mass bleaching event Ross J. Jones , Selina Ward, Affendi Yang Amri and Ove Hoegh-Guldberg

Pulse-amplitude-modulation chlorophyll fluorometry was used to examine changes in dark-adapted F-v/F-m of endosymbiotic dinoflagellate microalgae within the tissues of the temperate coral Plesiastrea versipora exposed to elevated seawater temperature. The F-v/F-m was markedly reduced following exposure of corals to 28 degrees C for 48 h. When corals were returned to ambient (24 degrees C) conditions, F-v/F-m increased in an initial rapid and then secondary slower phase. Tissue discolouration (coral bleaching), caused by a significant decrease in the density of algae, was observed during the first 2-3 days of the recovery period. After 14 days, F-v/F-m was still significantly lower than in control corals. The recovery of F-v/F-m is discussed in terms of repair processes within the symbiotic algae, division of healthy algae and also the selective removal of photo-damaged dinoflagellates. Under field conditions, bleached corals sampled at Heron Island Reef during a bleaching event had significantly lower F-v/F-m than non-bleached colonies; four months after the bleaching event, there were no differences in F-v/F-m or algal density in corals marked as having bleached or having shown no signs of colour loss. The results of this laboratory and field study are consistent with the hypothesis that an impairment of photosynthesis occurs during heat-stress, and is the underlying cause of coral bleaching.

Effects of biomass burning on nasal mucociliary clearance and mucus properties after sugarcane harvesting

Objective: Biofuel from sugarcane is widely produced in developing countries and is a clean and renewable alternative source of energy. However, sugarcane harvesting is mostly performed after biomass burning. The aim of this study was to evaluate the effects of harvesting after biomass burning on nasal mucociliary clearance and the nasal mucus properties of farm workers. Methods: Twenty seven sugarcane workers (21-45 years old) were evaluated at the end of two successive time-periods: first at the end of a 6-month harvesting period (harvesting), and then at the end of a 3-month period without harvesting (non-harvesting). Nasal mucociliary clearance was evaluated by the saccharine transit test, and mucus properties were analyzed using in vitro mucus contact angle and mucus transportability by sneeze. Arterial blood pressure, heart rate, respiratory rate, pulse oximetry, body temperature, associated illness, and exhaled carbon monoxide were registered. Results: Data are presented as mean values (95% confidence interval). The multivariate model analysis adjusted for age, body-mass index, smoking status and years of working with this agricultural practice showed that harvesting yielded prolonged saccharine transit test in 7.83 min (1.88-13.78), increased mucus contact angle in 8.68 degrees (3.18-14.17) and decreased transportability by sneeze in 32.12 mm (-44.83 to -19.42) compared with the non-harvesting period. No significant differences were detected in any of the clinical parameter at either time-period. Conclusion: Sugarcane harvesting after biomass burning negatively affects the first barrier of the respiratory system in farm workers by impairing nasal mucociliary clearance and inducing abnormal mucus properties. (C) 2011 Elsevier Inc. All rights reserved.

2,6,,9-trioxabicyclo[3.3.1]nona-3,7-dienes and 2,4,6,8-tetraoxaadamantanes: Novel chiral spacer units in macrocyclic polyethers

The unusual chiral heterocyclic systems, trioxabicyclo[3.3.1]nona-3,7-dienes (bridged bisdioxines), are incorporated as novel spacer molecules into macrocyclic polyether ring systems of various sizes (8, 9 as well as 11-15) by cyclocondensation reaction of the! bisacid chloride 4b or bisesters 6,7 and 10, with several ethylene glycols. The 2:2 macrocycles 12-14 are obtained in approximately 50:50 mixtures of diastereomers. These conclusions are mainly based on HPLC data presented in Table I as well as X-ray analyses of (1R,5R)-8c (space group Pbca, a = 10.163(3) Angstrom, b = 18.999(4) Angstrom, c = 36.187(10) Angstrom, V = 6987(3) Angstrom(3), Z = 8, d(calc) = 1.218 g cm(-3), 6974 reflections, R = 0.0553.), mesolrac-11 (space group P (1) over bar, a = 10.472(5) Angstrom, b = 16.390(5) Angstrom, c = 17.211(5) Angstrom, alpha = 98.69(2)degrees, beta = 93.04(2)degrees, gamma = 98.52(2)degrees, V = 2879.3(18) Angstrom(3), Z = 2, d(calc) = 1.173 g cm(-3), 11,162 reflections, R = 0.0945) and meso-12 (space group P2(1)/c, a = 9.927(2), b = 18.166(3), c = 17.820(3) Angstrom, beta = 96.590(10)degrees, V = 3192.3(10)Angstrom(3), Z = 4, D-c = 1.109 g cm(-3), 3490 reflections, R = 0.0646). The 1:1 macrocycles 8b,c are also formed by intramolecular transesterification of the open-chain bisesters 7b,c and their formation is favored by the use of metal ions as templates. The bridged bisdioxine moieties in 8b and 12 are converted into the corresponding chiral tetra-oxaadamantane spacers to afford macrocycles 16 and 17. Preliminary metal ion complexation studies with selected species (8c, 11-14) were also performed.

Efeitos da depleção de nitrogênio sobre a biomassa e produção lipídica lipídica de três espécies de microalgas fitoplânticas

O uso de lipídios obtidos a partir da biomassa de microalgas tem sido descrito como uma alternativa promissora para a indústria petro-diesel e envolve etapas como o cultivo de microalgas, separação da biomassa e extração de lipídios. Para viabilizar a produção em larga escala, é necessário selecionar as espécies mais produtivas, diminuir os custos de produção e determinar as condições ideais de cultivo. Os gêneros Chlorella, Desmodesmus e Ankistrodesmus apresentam características favoráveis à produção comercial, tendo sido então selecionada uma espécie de cada no presente trabalho. O objetivo do estudo foi avaliar diferentes condições de cultivo de Ankistrodesmus fusiformis, Chlorella vulgaris e Desmodesmus spinosus visando o aumento da produtividade em biomassa e lipídios totais. As algas foram identificadas e cultivadas em laboratório, em condições controladas de temperatura a 26ºC (±1), aeração por borbulhamento à pressão ambiente e luminosidade fornecida por lâmpadas fluorescentes, com intensidade de 47,25 μmol de fótons m-2.s-1 (3500 lux), fotoperiodo de 12h e pH 7, sob duas concentrações estressantes de nitrato de sódio (0,10 g/L e 0,05g/L). Os cultivos duraram em média 16 dias, sendo as curvas de crescimento construídas com dados de espectrofotometria óptica coletados a cada 48h, e a biomassa obtida ao final do cultivo por centrifugação e liofilização de cada unidade experimental. Para extração dos lipídios totais, foi utilizada a mistura de clorofórmio: metanol (1:2), segundo a metodologia de Bligh & Dyer (1959). Os tratamentos de estresse em D.spinosus resultaram em maior acúmulo lipídico, com aumento de até 149,7%, porém com drástica diminuição do crescimento e biomassa. Em C. vulgaris, nos tratamentos de estresse, verificou-se apenas ligeiro aumento do peso seco e teor de lipídios, não havendo diferença significativa entre os tratamentos e o controle. Da mesma forma, A.fusiformis não mostrou respostas significativas ao estresse pela redução de nitrato de sódio do meio, havendo ligeira diminuição do conteúdo lipídico e aumento do crescimento e biomassa. Com respostas diferentes para cada espécie estudada, evidencia-se a necessidade do conhecimento da fisiologia e autoecologia da cepa a ser cultivada em escala comercial visando à produção de ácidos graxos para fins de biodiesel.

Estudo da Influencia de antioxidantes na avaliacao da estabilidade oxidativa de biodiesel pelo metodo petroOXY

O uso do biodiesel como um substituto total ou parcial do diesel de petróleo é significativo, entretanto a sua baixa estabilidade oxidativa é um ponto desfavorável. Portanto o uso de antioxidantes é viável desde que diminuam a velocidade de degradação promovido pela oxidação. Mas a ação de um antioxidante está relacionada com a composição química do biodiesel ao qual é adicionado. Considerando a importância e o crescimento da indústria de biodiesel, a necessidade de utilização de antioxidantes, e a busca por novas fontes como matérias primas, faz-se necessário estudar a eficiência de antioxidantes para o aumento da vida útil do biodiesel, além de avaliar novas culturas com potencial de produção como o pinhão manso (Jatropha curcas L.) e nabo forrageiro (Raphanus sativus L.). O objetivo deste trabalho foi avaliar os antioxidantes BHT (butilhidroxitolueno), PA (ácido pirogálico) e PG (galato de propila), em concentrações de 50, 200, 500, 1000 e 2000 mg/kg, nos biodiesel de pinhão manso, nabo forrageiro e soja, empregando a metodologia PetroOXY, ensaio acelerado de oxidação, para a determinação do seu período de indução. Os biodieseis foram obtidos através de reações de transesterificação, utilizando rota metílica, com rendimentos superiores a 80% e foram caracterizados através de alguns parâmetros físico-químicos. Foi observada a eficiência do uso de antioxidantes no aumento da vida útil do biodiesel. E com o aumento da concentração houve um aumento do período de indução. A eficiência do BHT foi sempre crescente com o aumento da concentração para todos os biodieseis enquanto que para o PG e PA houve uma diminuição da eficiência na maior concentração. A metodologia usada para avaliação da estabilidade oxidativa, PetroOXY, mostrou-se eficaz, de boa repetibilidade e reprodutibilidade, além de ser mais rápida e completa que o método Rancimat. Na concentração mais elevada, 2000 mg/kg, o melhor desempenho foi para o BHT, nas concentrações inferiores a 2000 mg/kg, a melhor eficiência foi para o PA ~ PG, nos três biodieseis estudados, soja, nabo forrageiro e pinhão manso.

New heterogeneous catalysts for trans-esterification of triglycerides

This paper describes preliminary work done towards the development of new metallic heterogeneous catalysts to be used in the transesterification reaction of triglycerides, which is of considerable interest in the production of biodiesel. Biodiesel, is a mixture of mono-alkyl esters of fatty acids, and is currently manufactured by transesterification of triglycerides with methanol using NaOH or KOH as liquid base catalyst. Catalysts as such are corrosive to the equipment, and as these catalysts are in liquid phase must be neutralized after the completion of the reaction, typically using HCl, thus producing salt streams. Moreover, due to the presence of free fatty acids it reacts to form soaps as unwanted by-products, hence requiring more expensive separation processes. Therefore, there is a great need on the development of industrial processes for biodiesel production using solid acid catalysts. The key benefit of using solid acid catalysts is that no polluting by-products are formed and the catalysts do not have to be removed since they do not mix with the biodiesel product.

Study on the glycerolysis reaction of high free fatty acid oils for use as biodiesel feedstock

Biodiesel is the main alternative to fossil diesel and it may be produced from different feedstocks such as semi-refined vegetable oils, waste frying oils or animal fats. However, these feedstocks usually contain significant amounts of free fatty acids (FFA) that make them inadequate for the direct base catalyzed transesterification reaction (where the FFA content should be lower than 4%). The present work describes a possible method for the pre-treatment of oils with a high content of FFA (20 to 50%) by esterification with glycerol. In order to reduce the FFA content, the reaction between these FFA and an esterification agent is carried out before the transesterification reaction. The reaction kinetics was studied in terms of its main factors such astemperature, % of glycerin excess, % of catalyst used, stirring velocity and type of catalyst used. The results showed that glycerolysis is a promising pretreatment to acidic oils or fats (> 20%) as they led to the production of an intermediary material with a low content of FFA that can be used directly in thetransesterification reaction for the production of biodiesel. (C) 2011 Elsevier B.V. All rights reserved.

Study on the use of MgAl hydrotalcites as solid heterogeneous catalysts for biodiesel production

This paper, reports experimental work on the use of new heterogeneous solid basic catalysts for biodiesel production: double oxides of Mg and Al, produced by calcination, at high temperature, of MgAl lamellar structures, the hydrotalcites (HT). The most suitable catalyst system studied are hydrotalcite Mg:Al 2:1 calcinated at 507 degrees C and 700 degrees C, leading to higher values of FAME also in the second reaction stage. One of the prepared catalysts resulted in 97.1% Fatty acids methyl esters (FAME) in the 1st reaction step, 92.2% FAME in the 2nd reaction step and 34% FAME in the 3rd reaction step. The biodiesel obtained in the transesterification reaction showed composition and quality parameters within the limits specified by the European Standard EN 14214. 2.5% wt catalyst/oil and a molar ratio methanol:oil of 9:1 or 12:1 at 60 -65 degrees C and 4 h of reaction time are the best operating conditions achieved in this study. This study showed the potential of Mg/Al hydrotalcites as heterogeneous catalysts for biodiesel production. (C) 2011 Elsevier Ltd. All rights reserved.

Primary screening of the bioactivity of brackishwater cyanobacteria: toxicity of crude extracts to artemia salina larvae and paracentrotus lividus embryos

Cyanobacteria are a diverse group of Gram-negative bacteria that produce an array of secondary compounds with selective bioactivity against vertebrates, invertebrates, plants, microalgae, fungi, bacteria, viruses and cell lines. The aim of this study was to assess the toxic effects of aqueous, methanolic and hexane crude extracts of benthic and picoplanktonic cyanobacteria isolated from estuarine environments, towards the nauplii of the brine shrimp Artemia salina and embryos of the sea urchin Paracentrotus lividus. The A. salina lethality test was used as a frontline screen and then complemented by the more specific sea urchin embryo-larval assay. Eighteen cyanobacterial isolates, belonging to the genera Cyanobium, Leptolyngbya, Microcoleus, Phormidium, Nodularia, Nostoc and Synechocystis, were tested. Aqueous extracts of cyanobacteria strains showed potent toxicity against A. salina, whereas in P. lividus, methanolic and aqueous extracts showed embryo toxicity, with clear effects on development during early stages. The results suggest that the brackishwater cyanobacteria are producers of bioactive compounds with toxicological effects that may interfere with the dynamics of invertebrate populations.

Biodiesel production from waste frying oils over lime catalysts

Biodiesel production from semi-refined oils (SRO) and waste frying oils (WFO) was studied using commercial CaO as heterogeneous catalyst. The methanolysis tests were carried out in mild reaction conditions (62 A degrees C, atmospheric pressure). With such conditions, SRO (soybean and rapeseed) allowed to produce a biodiesel containing 97-98 % of methyl esters (FAME), whereas WFO only provided 86-87 % of FAME. The lower FAME yield for WFO oil is ascribable to the partial neutralization of the catalyst by free fatty acids. Also, soaps formation from the WFO oil reduced the weight yield of the oil phase (containing FAME) obtained and increased the MONG content of the glycerin phase. The catalysts stability tests showed high stability even when WFO oil was processed. Catalytic tests performed with blends of WFO/semi-refined oils showed blending as a good strategy to process low value raw oils with minor decay of the catalyst performance. Both WFO and semi-refined oils showed S-shape kinetics curves thus discarding significant differences of the reaction mechanisms.

Cultivo Intensivo de Microalgas na Região Autónoma dos Açores: uma Abordagem Biotecnológica Integrada

Jornadas "Ciência nos Açores – que futuro? Tema Ciências Naturais e Ambiente", Ponta Delgada, 7-8 de Junho de 2013.

Potencial de cultivo intensivo de microalgas na região autónoma dos Açores: uma abordagem biotecnológica integrada

Jornadas "Ciência nos Açores – que futuro?", Ponta Delgada, 7-8 de Junho de 2013.

Produção de biodiesel por catálise heterogénea

Mestrado em Engenharia Química. Ramo optimização energética na indústria química.