Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry

In this paper the adequacy and the benefit of incorporating glass fibre reinforced polymer (GFRP) waste materials into polyester based mortars, as sand aggregates and filler replacements, are assessed. Different weight contents of mechanically recycled GFRP wastes with two particle size grades are included in the formulation of new materials. In all formulations, a polyester resin matrix was modified with a silane coupling agent in order to improve binder-aggregates interfaces. The added value of the recycling solution was assessed by means of both flexural and compressive strengths of GFRP admixed mortars with regard to those of the unmodified polymer mortars. Planning of experiments and data treatment were performed by means of full factorial design and through appropriate statistical tools based on analyses of variance (ANOVA). Results show that the partial replacement of sand aggregates by either type of GFRP recyclates improves the mechanical performance of resultant polymer mortars. In the case of trial formulations modified with the coarser waste mix, the best results are achieved with 8% waste weight content, while for fine waste based polymer mortars, 4% in weight of waste content leads to the higher increases on mechanical strengths. This study clearly identifies a promising waste management solution for GFRP waste materials by developing a cost-effective end-use application for the recyclates, thus contributing to a more sustainable fibre-reinforced polymer composites industry.

Novos poluentes. Principais impactes de compostos desreguladores endócrinos na saúde pública

O desenvolvimento verificado nos processos de produção agrícola e industrial originou o aparecimento e acumulação de vários poluentes, como os compostos desreguladores endócrinos, os quais podem ser encontrados em diversos produtos como: plásticos, fitofarmacêuticos e compostos orgânicos, podendo os seus efeitos serem também provocados por metais pesados. Podem ainda, ter origem natural, como os fitoestrogéneos. Assim, a exposição a estes compostos pode materializar-se por diversas vias, das quais se destaca a alimentação. Ao interagir com o sistema endócrino, aqueles compostos podem originar efeitos noutros sistemas, nomeadamente no reprodutivo, imunológico e neurológico, para além de poderem ter efeitos cancerígenos, bem como contribuir para a obesidade. O aumento da incidência de cancros, como da mama e dos testículos, tem levado a uma preocupação crescente sobre a exposição in utero àqueles compostos e durante fases chave do desenvolvimento. Analisando três estudos, sobre os mencionados tipos de cancro, observou-se uma maior incidência nos países do Norte da Europa, assim como em grupos etários específicos. Comparando os dados de Portugal com a Europa, para 1997, observou-se uma menor incidência no nosso País. Por outro lado, a Comissão Europeia adoptou medidas que se baseiam no controlo de risco referente à exposição a estes compostos, através de três fases: identificação, avaliação e gestão do risco. Legislação Comunitária, como a Directiva-Quadro da Água ou respeitante ao controlo de compostos químicos, contribuem também para reduzir a exposição a compostos desreguladores endócrinos.

Contribuição para o estudo de compostos desreguladores endócrinos (EDC) em estações de tratamento de águas residuais

Desde os anos 90 que se suspeita que um vasto leque de compostos, que estão presentes no ambiente aquático é susceptível de causar disrupção endócrina, podendo provocar efeitos adversos na nível do sistema reprodutor de vários organismos, de entre os quais os surfactantes não-iónicos alquifenois polietoxilatos(APEO), estrogénios, compostos organoclorados, entre outros. Estes, têm sido amplamente utilizados nos últimos 50 anos numa vasta diversidade de aplicações domésticas e comerciais. Durante o tratamento de águas residuais urbanas e industriais, os APEO são degradados sucessivamente até formas menos biodegradáveis, como por exemplo o NP (nonilfenol) e o OP (octilfenol), acabando por ser descarregados no ambiente aquático. A informação disponível, relativamente ao efeito das elevadas descargas nos meios receptores e da sua potencial toxicidade é ainda muito limitada, nomeadamente em sistemas aquáticos. Por outro lado, a informação sobre remoção de EDC em estações de tratamento de águas residuais (ETAR) é igualmente muito escassa, circunstância que impede a realização de estimativas de balanços materiais, indispensáveis à previsão dos correspondentes impactes nos meios hídricos, pelo que, este estudo teve como principal objectivo, a avaliação do potencial estrogénico de um efluente de uma ETAR com tratamento terciário. O presente estudo foi realizado na ETAR de Chelas, em Lisboa (Portugal). O efluente da ETAR é caracterizado por não ser só, efluente doméstico mas também ser constituído por quantidades significativas de efluente industrial. A escolha desta ETAR para realizar este estudo recaiu também na sua linha de tratamento, isto é, a ETAR possui tratamento terciário com remoção de azoto e desinfecção final do efluente através de U.V. De forma a detectar e quantificar o potencial estrogénico de uma água seleccionaramse compostos específicos, isto é alguns EDC “alvo”, nomeadamente: (i) nonilfenol e octilfenol (NP e OP); (ii) bisfenol A (BPA) e (iii) 17 β-estradiol (E2). Foram utilizadas três técnicas diferentes para identificar e quantificar os EDC seleccionados ELISA, LC-MS-MS e HPLC. As técnicas foram igualmente comparadas. Em todos os casos, isto é, independentemente da técnica analítica usada ficou demonstrado que os EDC seleccionados estavam presentes no efluente da ETAR,variando as suas concentrações de composto para composto e também ao longo da linha de tratamento da ETAR, e que ainda são descarregadas, no Estuário do Tejo,níveis de concentrações que poderão causar efeitos fisiológicos na vida animal. Contudo, devido ao elevado nível de diluição existente no Estuário do Tejo (caudais muito grandes) os efeitos nos organismos poderão não ser relevantes e,ou imediatos. Os níveis mais elevados de APE (NP e OP) foram detectados no afluente à ETAR e os menores no efluente da ETAR. O valor mais elevado de E2 foi registado após a decantação primária. A variação de E2 ao longo da linha de tratamento foi pouco significativa, facto este que poderá estar relacionado também com a “cross-reactivity”, bem como a própria actividade microbiológica existente numa água residual. Os maiores valores para o BPA foram obtidos nas lamas primárias (acima dos limites de detecção), tendo sido registada uma redução significativa deste composto ao longo da linha de tratamento, o que poderá indicar que a ETAR de Chelas remove eficientemente este composto.

Exposição ocupacional a compostos orgânicos voláteis e a matéria particulada na limpeza automóvel em parques de estacionamento

Mestrado em Segurança e Higiene no Trabalho

Low-loss austempered ductile iron gears: experimental evaluation comparing materials and lubricants

An experimental study to evaluate the power dissipation of gears was performed. Three low-loss gear models were manufactured using standard 20° pressure angle tools. Austempered ductile iron (ADI) and 20MnCr5 carburized steel gears were tested in an FZG gear test machine using mineral, ester and polyalphaolephine (PAO)-based oils. The results compare power dissipation, the influence of different tooth flank geometries, materials and lubricants. This work concludes that conventional power-transmission gears can be replaced by these improved and more efficient low–loss models, which can be produced using common tools and that steel gears can be successfully replaced by austempered ductile iron gears.

Contribuição para o estudo de compostos desreguladores endócrinos (EDC) em estações de tratamento de águas residuais (ETAR): estudo da remoção de EDC`S numa etar com tratamento terciário

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente – Perfil Engenharia Sanitária

Effects of oxidante acid treatments on carbon-templated hierarchical SAPO-11 materials: synthesis, characterization and catalytic evaluation in n-decane hydroiosomerization

Hierarchical SAPO-11 was synthesized using a commercial Merck carbon as template. Oxidant acid treatments were performed on the carbon matrix in order to investigate its influence on the properties of SAPO-11. Structural, textural and acidic properties of the different materials were evaluated by XRD, SEM, N-2 adsorption, pyridine adsorption followed by IR spectroscopy and thermal analyses. The catalytic behavior of the materials (with 0.5 wt.% Pt, introduced by mechanic mixture with Pt/Al2O3), were studied in the hydroisomerization of n-decane. The hierarchical samples showed higher yields in monobranched isomers than typical microporous SAPO-11, as a direct consequence of the modification on both porosity and acidity, the later one being the most predominant. (C) 2014 Elsevier B.V. All rights reserved.

From cellulosic based liquid crystalline sheared solutions to 1D and 2D soft materials

Liquid crystalline cellulosic-based solutions described by distinctive properties are at the origin of different kinds of multifunctional materials with unique characteristics. These solutions can form chiral nematic phases at rest, with tuneable photonic behavior, and exhibit a complex behavior associated with the onset of a network of director field defects under shear. Techniques, such as Nuclear Magnetic Resonance (NMR), Rheology coupled with NMR (Rheo-NMR), rheology, optical methods, Magnetic Resonance Imaging (MRI), Wide Angle X-rays Scattering (WAXS), were extensively used to enlighten the liquid crystalline characteristics of these cellulosic solutions. Cellulosic films produced by shear casting and fibers by electrospinning, from these liquid crystalline solutions, have regained wider attention due to recognition of their innovative properties associated to their biocompatibility. Electrospun membranes composed by helical and spiral shape fibers allow the achievement of large surface areas, leading to the improvement of the performance of this kind of systems. The moisture response, light modulated, wettability and the capability of orienting protein and cellulose crystals, opened a wide range of new applications to the shear casted films. Characterization by NMR, X-rays, tensile tests, AFM, and optical methods allowed detailed characterization of those soft cellulosic materials. In this work, special attention will be given to recent developments, including, among others, a moisture driven cellulosic motor and electro-optical devices.

Mechanical properties of stent-graft materials

An aneurysm is a localized blood-filled dilatation of an artery whose consequences can be deadly. One of its current treatments is endovascular aneurysm repair, a minimally invasive procedure in which an endoprosthesis, called a stent-graft, is placed transluminally to prevent wall rupture. Early stent-grafts were custom designed for the patient through the assembling of off-the-shelf components by the operating surgeon. However, nowadays, stent-grafts have become a commercial product. The existing endoprostheses differ in several aspects, such as shape design and materials, but they have in common a metallic scaffold with a polymeric covering membrane. This article aims to gather relevant information for those who wish to understand the principles of stent-grafts and even to develop new devices. Hence, a stent-graft classification based on different characteristics is presented and the desired features for an ideal device are pointed out. Additionally, the materials currently in use to fabricate this type of endoprosthesis are reviewed and new materials are suggested.

Color and Luminescence stability of selected dental materials in vitro

To study luminescence, reflectance, and color stability of dental composites and ceramics. Materials and Methods: IPS e.max, IPS Classic, Gradia, and Sinfony materials were tested, both unpolished (as-cast) and polished specimens. Coffee, tea, red wine, and distilled water (control) were used as staining drinks. Disk-shaped specimens were soaked in the staining drinks for up to 5 days. Color was measured by a colorimeter. Fluorescence was recorded using a spectrofluorometer, in the front-face geometry. Time-resolved fluorescence spectra were recorded using a laser nanosecond spectrofluorometer. Results: The exposure of the examined dental materials to staining drinks caused changes in color of the composites and ceramics, with the polished specimens exhibiting significantly lower color changes as compared to unpolished specimens. Composites exhibited lower color stability as compared to ceramic materials. Water also caused perceptible color changes in most materials. The materials tested demonstrated significantly different initial luminescence intensities. Upon exposure to staining drinks, luminescence became weaker by up to 40%, dependent on the drink and the material. Time-resolved luminescence spectra exhibited some red shift of the emission band at longer times, with the lifetimes in the range of tens of nanoseconds. Conclusions: Unpolished specimens with a more developed surface have lower color stability. Specimens stored in water develop some changes in their visual appearance. The presently proposed methods are effective in evaluating the luminescence of dental materials. Luminescence needs to be tested in addition to color, as the two characteristics are uncorrelated. It is important to further improve the color and luminescence stability of dental materials.

Pt/Carbon materials as Bi-Functional catalysts for N-decane hydroisomerization

The activity and selectivity of bi-functional carbon-supported platinum catalysts for the hydroisomerization of n-alkanes have been studied. The influence of the properties of the carbon support on the performance of the catalysts were investigated by incorporating the metallic function on a series of carbons with varied porosity (microporous: GL-50 from Norit, and mesoporous: CMK-3) and surface chemistry (modified by wet oxidation). The characterization results achieved with H-2 chemisorption and TEM showed differences in surface metal concentrations and metal-support interactions depending on the support composition. The highest metal dispersion was achieved after oxidation of the carbon matrix in concentrated nitric acid, suggesting that the presence of surface functional sites distributed in inner and outer surface favors a homogeneous metal distribution. On the other hand, the higher hydrogenating activity of the catalysts prepared with the mesoporous carbon pointed out that a fast molecular traffic inside the pores plays an important role in the catalysts performance. For n-decane hydroisomerization of long chain n-alkanes, higher activities were obtained for the catalysts with an optimized acidity and metal dispersion along with adequate porosity, pointing out the importance of the support properties in the performance of the catalysts.

Influence of constraining and confinement in the molecular mobility of low molecular weight materials

Dissertation presented to obtain a Ph.D. Degree in Chemical Physics

Remoção de compostos farmacêuticos persistentes das águas efeitos no ambiente e na saúde humana

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente, perfil Engenharia Sanitária