950 resultados para Matéria


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The soil management system can modify the natural distribution of the soil attributes and, consequently, the variability of the soil aggregation and organic matter content. Thus, the aim of this work was to evaluate the aggregate stability and organic matter content spatial distribution on a Haplic Cambisol under sugar cane cultivation in the Southern Amazonas State, Brazil. A 70 x 70 m square mesh, with regular 10 meters intervals, was designed over the cultivation area, resulting in 64 sample points. Soil blocks with preserved structure were collected at 0.0-0.2 m depth in order to analyze the aggregate stability and organic matter content. The data were submitted to the descriptive and geostatistical analysis. The soil attributes presented a spatial dependence structure and the greater range was observed for the mean weighted diameter and aggregate class <1.00 mm. Also, there is a spatial relation among the mean geometric diameter, mean weighted diameter and aggregate classes (>2.00 and 2.00-1.00 mm).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The volume of liquid effluent generated in cattle slaughterhouses is quite high and cannot be released untreated in water bodies due to its high pollution load of predominantly organic origin. To minimize the environmental impacts of its industrial wastewater and meet the local environmental legislation, abattoirs shall make the treatment of these effluents. The present work aims to develop the study of a reactor by sequential batch pilot scale, in order to optimize their performance in treating wastewater from a cattle slaughterhouse. The treatment system used was developed and installed in the Laboratory of Wastewater Treatment, in Faculty of Science and Technology UNESP, Presidente Prudente campus. The procedure used followed the operation of sequential batch reactors, in which all processes and treatment operations occurring sequentially in a single unit, by establishing specific operating cycles, which comprise the following separated phases: aerobic reaction, anoxic reaction, sedimentation and emptying. Aiming to improve the quality of treatment was planned the addition of coagulant Poly Aluminum Chloride (PAC) in the reactor, by determining their optimal dosage by Jar-test trials. Were prepared four steps with specific operating cycles: step one or acclimatization (10 hour of aeration, one hour and 30 minutes of sedimentation and 30 minutes for exchanging the effluent); step 2 (6 hours of aeration or aerobic phase, 4 hours and 45 minutes of stirring or anoxic phase and 1 hour and 15 minutes for sedimentation and exchange effluent); step 3 (2 hours and 30 minutes of aeration, 8 hours and 15 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange) and step 4 (2 hours of aeration, 8 hours and 45 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange)... (Complete abstract click electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The world is an environment in constant process of globalization, where physical boundaries are no longer limits. The competitiveness has also evolved, forcing companies to adopt efficient practices in order to increase productivity gains, reduce losses and improve quality. Nowadays, the supply chain management and its element, including the internal logistics, is regarded as a key element for gaining competitiveness. Thus, this study focused on identifying and implementing improvements in the internal raw materials transport operations of a consumer goods company, based on concepts and tools of the lean thinking. The results showed considerable gains in productivity with consequent cost reduction, proving the efficiency of the methodology lean even in support areas of an organization.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

La performance desentreprises ça dépend, engrande partie, deses chaînesd’approvisionnement. Celas peuvent entretrès complexe, car elle implique tout le processus avant, pendant et après l’assemblage duproduit fini. Ce travaila donc comme objectifl’amélioration de lagestion des imprévus qu’arrivent audébutdela chaîne d’approvisionnement et lesimpacts sur l’approvisionnement de la ligne d’assemblage d’une usine. L’approche méthodologique utilisée est la recherche-action. De cette façon, ce travail présente une standardisation des processusquechaque département doit fairedans uncas de rupture dans la chaîne. D’après entretiens, analyses de document, standardisation des organigrammes et graphiques croisés dynamiques, ila été possible proposer un moyen plus critique d’analyser et résoudre certains problèmes. En tant que résultats, viennent un organigramme défini, une divulgation des informations plus précises pour la prise en décision et unes l’analyse critique de l’historique des imprévus. Il s’agit d’un ensemble des processus meilleur pour une bonne prise en décision de court, moyen et long terme pour les dépenses avec des imprévus dans l’approvisionnement de matière-première de l’usine

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Cassava wastewater, generated during cassava processing, is a highly polluting and toxic waste. This study aimed to assess the relationship of cassava treatment efficiency in two aerobic sequencing batch reactors, cylindrical plastics (31cm height x 9cm diameter), with 2.0 liters capacity and 1.5 liters of work volume, a ratio of diameter and height of the liquid 1:2.5, with a running time of 24 hours and stoppage aeration for 16 hours with average feed of 2,500 and 6,000 mg COD. L -1. COD, pH, SVI and F/M were analyzed. The results obtained in the two reactors showed an average reduction of 94.1% and 76.8% organic content, respectively; pH values showed a rising in the output pH values compared to entry ones; SVI values obtained: 54.1 mL/g, 99.3 mL/g, respectively in a F/M ratio values worked out of 0.4 d-1 and 1,1 d-1 , respectively. The results demonstrated that the process has generated considerable saving in energy consumption compared to traditional continuous systems, was efficient and did not affect the efficiency overly of the reactor.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Microbiologia Agropecuária - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nutrient accumulation curves help us understand the nutritional demands of a crop. The aim of this study was to evaluate the growth and accumulation of macronutrients by the sweet sorghum cultivars CVSW80007, CVSW80147, CVSW82028, CVSW82158. The experiment was conducted in a renewal sugarcane ratoon area at Uchoa county, SP, being deployed in January 2012. The plants were collected in 15 days intervals from the 10th after emergence (DAE). The greatest content of dry matter, N, P, Mg and S, was due to by the CVSW82028 cultivar, while the CVSW82158 extract the greatest amount of K and the CVSW80147 of Ca. The stalks represented the highs percentage of dry matter and nutrient content, except nitrogen and phosphorus, in which grains corresponded to the higher percentage of total absorption. The CVSW80007, CVSW82028 and CVSW82158 cultivars showed the following decreasing nutrient extraction N>K>Ca>Mg>P>S and the CVSW80147, K>N>Ca>Mg>P>S. Considering only the stalks harvest, the decreasing nutrient exportation is the same for all cultivars: K>N>Ca>Mg>S>P. Whereas the decreasing nutrient exportation sequence considering stalks and grain harvest is the following for the CVSW80007, CVSW80147 and CVSW82158 cultivars: K>N>Ca>Mg>P>S and K>N>Ca>Mg>P>S for the CVSW82028.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo desse estudo foi avaliar diferentes métodos de secagem de folhas para três diferentes frutíferas (maracujá, pêssego e abacate), com relação à determinação da matéria seca e os teores foliares de macronutrientes. Foram coletadas amostras de folhas recém expandida de três culturas, do pomar da fazenda de ensino e pesquisa da FCAV-UNESP, câmpus de Jaboticabal, no mês de janeiro de 2010, coletando-se para cada cultura 12 amostras com 25 folhas cada. Os tratamentos constituíram-se por dois métodos de secagem, estufa de circulação de ar forçada regulada a uma temperatura de 70°C e o forno microondas (FMO). Avaliou-se a massa da matéria seca e os teores foliares de macronutrientes. Os resultados sugerem que os dois métodos de secagem testados se assemelham na determinação de matéria seca e nos teores foliares de macronutrientes para as culturas análisadas, exceto os teores de cálcio na cultura do pêssego.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Ciência do Solo) - FCAV