Dispersal of the delayed action insecticide sulfluramid in colonies of the leaf-cutting ant Atta sexdens rubropilosa (Hymenoptera: Formicidae)

Toxic baits are the most used control method for leaf-cutting ants due to their high effectiveness and because they are considered the safest for humans. Taking into account that the importance of leaf-cutting ants as pests, knowing the process by which dispersal and worker contamination is achieved becomes essential to understand several aspects about the functioning of a bait-borne AI (active ingredient) used in toxic baits. It has been established that an effective toxic bait should have a delayed- action AI, but its dispersion among the different sizes of workers is unknown. Workers of different sizes are involved in quite different tasks such foraging, cultivation of symbiotic macrofungus or control of deleterious microfungi. Therefore, we prepared a toxic bait containing the delayed-action AI sulfluramid and a dye (Rhodamine B) as an AI tracer in order to study dispersal and contamination in colonies, evaluated at different periods and in relation to different workers' sizes. Both field and laboratory colonies were evaluated. The great level of contamination, about 50% at 24 hours, in all sizes of workers demonstrates that worker contact with toxic bait is intense within this period. The distribution in field and laboratory colonies was similar. This contamination pattern is probably enough to cause the colony to die because of contamination of smaller workers, leading to the loss of control of the aggressive microfungi, which can quickly overgrow the symbiotic fungus culture. The dispersal dynamics of AI in leaf-cutting ant workers is important for investigations on the mode of action of this insecticide in the colony, and as a reference in future studies, such as those attempting to reduce the concentration of AIs in baits to reduce their environmental impact, or for facilitation of new AI screening.

Thelytokous parthenogenesis in the fungus-gardening ant Mycocepurus smithii (Hymenoptera: Formicidae)

The general prevalence of sexual reproduction over asexual reproduction among organisms testifies to the evolutionary benefits of recombination, such as accelerated adaptation to changing environments and elimination of deleterious mutations. Documented instances of asexual reproduction in groups otherwise dominated by sexual reproduction challenge evolutionary biologists to understand the special circumstances that might confer an advantage to asexual reproductive strategies. Here we report one such instance of asexual reproduction in the ants. We present evidence for obligate thelytoky in the asexual fungus-gardening ant, Mycocepurus smithii, in which queens produce female offspring from unfertilized eggs, workers are sterile, and males appear to be completely absent. Obligate thelytoky is implicated by reproductive physiology of queens, lack of males, absence of mating behavior, and natural history observations. An obligate thelytoky hypothesis is further supported by the absence of evidence indicating sexual reproduction or genetic recombination across the species' extensive distribution range (Mexico-Argentina). Potential conflicting evidence for sexual reproduction in this species derives from three Mycocepurus males reported in the literature, previously regarded as possible males of M. smithii. However, we show here that these specimens represent males of the congeneric species M. obsoletus, and not males of M. smithii. Mycocepurus smithii is unique among ants and among eusocial Hymenoptera, in that males seem to be completely absent and only queens (and not workers) produce diploid offspring via thelytoky. Because colonies consisting only of females can be propagated consecutively in the laboratory, M. smithii could be an adequate study organism a) to test hypotheses of the population-genetic advantages and disadvantages of asexual reproduction in a social organism and b) inform kin conflict theory. For a Portuguese translation of the abstract, please see Abstract S1. © 2009 Rabeling et al.

Market-driven security-constrained transmission network expansion planning

This paper presents a Bi-level Programming (BP) approach to solve the Transmission Network Expansion Planning (TNEP) problem. The proposed model is envisaged under a market environment and considers security constraints. The upper-level of the BP problem corresponds to the transmission planner which procures the minimization of the total investment and load shedding cost. This upper-level problem is constrained by a single lower-level optimization problem which models a market clearing mechanism that includes security constraints. Results on the Garver's 6-bus and IEEE 24-bus RTS test systems are presented and discussed. Finally, some conclusions are drawn. © 2011 IEEE.

Queen lipid content and nest growth in the leaf cutting ant (Atta sexdens rubropilosa) (Hymenoptera: Formicidae)

The relationship between the queens' lipid content and nest growth (population size, biomass and nest architecture) was studied from founding up to 1 year. Nests aged 3, 4, 5, 6, 9 and 12 months were dug in the field, and their dimensions were measured. The ant nest population and fungus garden was also collected. The sample was taken to the laboratory where we counted the worker population and weighed the biomass (fungus plus offspring) and queens. Queens were separated for the determination of lipids. The lipid content in the bodies of queens decreased in the first months, then stabilized (at 4-6 months) before increasing in months 9 and 12. Nest biomass (symbiotic fungus and offspring) and worker population increased over time. The structural growth of the nests was observed by excavating around them. Initially nests (3 months old) had one chamber at an average depth of 15 cm. By 1 year, the nests had three or four deep chambers, and were about 3-4 m deep. Our study contributes to knowledge of the dynamics of the energy-reserve expenditure by queens during colony founding and colony development for up to 1 year. © 2013 Copyright Taylor and Francis Group, LLC.

Distributed generators as providers of reactive power support - A market approach

Traditionally, ancillary services are supplied by large conventional generators. However, with the huge penetration of distributed generators (DGs) as a result of the growing interest in satisfying energy requirements, and considering the benefits that they can bring along to the electrical system and to the environment, it appears reasonable to assume that ancillary services could also be provided by DGs in an economical and efficient way. In this paper, a settlement procedure for a reactive power market for DGs in distribution systems is proposed. Attention is directed to wind turbines connected to the network through synchronous generators with permanent magnets and doubly-fed induction generators. The generation uncertainty of this kind of DG is reduced by running a multi-objective optimization algorithm in multiple probabilistic scenarios through the Monte Carlo method and by representing the active power generated by the DGs through Markov models. The objectives to be minimized are the payments of the distribution system operator to the DGs for reactive power, the curtailment of transactions committed in an active power market previously settled, the losses in the lines of the network, and a voltage profile index. The proposed methodology was tested using a modified IEEE 37-bus distribution test system. © 1969-2012 IEEE.

Exports from the Brazilian automotive sector to the Southern Common Market: Trade diversion or cost reduction?

The automotive sector is one of the sectors in which trade between mercosur countries has grown most strongly. This article examines the possibility that trade diversion occurred in that sector during the period 1991-2010, assuming that product costs fell as a result of market expansion. The analysis is based on the concepts of “cost reduction” and “trade suppression” coined by Corden (1972), which capture the effects of economies of scale. Indices of regional orientation and revealed comparative advantages are used in combination to assess whether the trade bloc is evolving in line with comparative advantages. The results suggest efficiency gains for automotive-sector products, exports of which from Brazil to mercosur grew more vigorously because the expanded and relatively protected market made it possible to exploit the economies of scale that are characteristic of the automotive industry.

Crop optimization and pre-steps standardization to get a Bipolaris euphorbiae-based bioherbicide

Making bioproducts available to the market requires finding appropriate processes for mass production and formulation of biological agents. This study aimed at evaluating the Bipolaris euphorbiae production in a solid medium (fermentation in solid substrate) and in a biphasic system (growth in a liquid medium followed by growth in a solid medium), as well as determining the processes for collecting and drying conidia, under laboratory conditions. The influence of the incubation period and inoculum quantity were also investigated. The conidia were dried by using an oven (30ºC, 35ºC, 40ºC, 45ºC, 50ºC, 55ºC and 60ºC), and laminar flow, continuous air flow and aseptic chamber at room temperature. Dry conidia were obtained by sieving and grinding in a ball mill, hammer mill or grain grinder. The conidia viability and sporulation efficiency were evaluated in the solid medium and in the biphasic system. For growth period, the best sporulation on solid medium was obtained after 10 days of incubation, reaching 8.3 x 10(7) conidia g-1 of substrate. The biphasic system did not increase the B. euphorbiae sporulation (4.5 x 10(7) conidia g-1 of substrate), after 14 days, and the amount of liquid inoculum used in this system was not an important factor for increasing its production. The continuous air flow and laminar flow preserved the conidial viability (94.6% and 99.1%, respectively), while promoting a great moisture loss (62.6% and 54.0%, respectively). All the grinding processes reduced the conidia germination (86.2%, 10.5% and 12%, respectively), while sieving allowed the collecting of powdered conidia with high viability (94.8%).

Polydomy in the ant Ectatomma opaciventre

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Protein content of leaf-cutting ant queens before the nuptial flight and during the post-claustral phase

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of twenty-one polymorphic microsatellite markers for the fungus-growing ant, Mycocepurus goeldii (Formicidae: Attini), using Illumina paired-end genomic sequencing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Revision of the fungus-growing ant genera Mycetophylax Emery and Paramycetophylax Kusnezov rev. stat., and description of Kalathomyrmex n. gen. (Formicidae: Myrmicinae: Attini)

Based on the morphology of workers, gynes and males, we revise the taxonomy of nominal taxa traditionally included by authors in the fungus-growing ant genus Mycetophylax. Our results indicate that Mycetophylax Emery (Myrmicocrypta brittoni Wheeler, 1907, type species, by designation of Emery, 1913; junior synonym of Cyphomyrmex conformis Mayr, 1884 by Kempf, 1962) includes M. conformis, M. simplex (Emery, 1888), and M. morschi (Emery, 1888) new combination (formerly in Cyphomyrmex), with several synonymies. Mycetophylax bruchi (Santschi, 1916) does not belong to the same genus and is diagnosed, in addition to other characters, by a psammophore arising at the anterior margin of the clypeus. For this species we are resurrecting from synonymy Paramycetophylax Kusnezov, 1956 (Mycetophylax bruchi as type species, by original designation, with M. cristulatus as its new synonym). Myrmicocrypta emeryi Forel, 1907 is the only attine in which females lack the median clypeal seta and have the antennal insertion areas very much enlarged and anteriorly produced, with the psammophore setae arising from the middle of the clypeus and not at its anterior margin as in Paramycetophylax. Notwithstanding its inclusion in Mycetophylax by recent authors, it is here recognized as belonging to a hitherto undescribed, thus far monotypic genus, Kalathomyrmex new genus (Myrmicocrypta emeryi as its type species, here designated). We redescribe workers, gynes and males of all species in the three genera and describe for the first time gynes of Mycetophylax conformis and M. simplex, males of M. simplex and M. morschi, and gynes of P. bruchi. Furthermore we present a key to the workers of the taxa treated here (most formerly included under the name Mycetophylax), a key to workers of the Mycetophylax in the revised sense, SEM pictures and high resolution AutoMontage(C) photographs of the species, along with maps of collection records and a summary of biological observations.

Tropidomyrmex elianae, a new myrmicine ant genus and species from Brazil, tentatively assigned to Solenopsidini (Hymenoptera, Formicidae)

A new myrmicine ant, Tropidomyrmex elianae gen. n. & sp. n., is described from southeastern and central Brazil, based on workers, ergatoid gynes, males and larvae. Tropidomyrmex workers are relatively small, monomorphic, characterized mainly by the feebly pigmented and extremely thin integument; subfalcate mandibles bearing a single apical tooth; palpal formula 1,2; clypeus relatively broad and convex; reduced compound eyes; propodeum unarmed and with a strongly medially depressed declivous face; double and bilobed well developed subpostpetiolar processes; and peculiarities in the sting apparatus. A colony fragment of T. elianae containing workers, ergatoid gynes, males, and brood was found inside a ground termite nest (Anoplotermes pacificus Apicotermitinae) in a montane rocky scrubland in the state of Minas Gerais, southeastern Brazil. Tropidomyrmex elianae is known also from two workers collected in leaf litter samples processed with a Winkler extractor, from the state of Tocantins, central-north Brazil. Despite the differences from the accepted solenopsidine genera, Tropidomyrmex is tentatively assigned to this tribe. Within the solenopsidine ants, the genus is apparently related to Tranopelta. Tropidomyrmex is marked by extreme reductions, perhaps reflecting adaptations to particular habits and habitats.

Social facilitation and food partitioning in the queenless ant Dinoponera quadriceps (Hymenoptera: Formicidae)

Social facilitation occurs when an animal is more likely to behave in a certain way in response to other animals engaged in the same behaviour. For example, an individual returning to the nest with food stimulates other ants to leave and to forage. In the present study we demonstrate the existence of new facets in the colony organization of Dinoponera quadriceps: a positive feedback between the incoming food and the activation of new foragers, and the occurrence of incipient task partitioning during the food sharing. Lower-ranked workers located inside the nest process protein resources and higher-ranked workers handle smaller pieces and distribute them to the larvae. In conclusion, D. quadriceps has a decentralized pattern of task allocation with a double regulatory mechanism, which can be considered a sophisticated aspect of division of labour in ponerine ants.

Influence of pattern gradation on the design of piezocomposite energy harvesting devices using topology optimization

Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. Energy harvesting devices are designed to capture the ambient energy surrounding the electronics and convert it into usable electrical energy. The design of energy harvesting devices is not obvious, requiring optimization procedures. This paper investigates the influence of pattern gradation using topology optimization on the design of piezocomposite energy harvesting devices based on bending behavior. The objective function consists of maximizing the electric power generated in a load resistor. A projection scheme is employed to compute the element densities from design variables and control the length scale of the material density. Examples of two-dimensional piezocomposite energy harvesting devices are presented and discussed using the proposed method. The numerical results illustrate that pattern gradation constraints help to increase the electric power generated in a load resistor and guides the problem toward a more stable solution. (C) 2012 Elsevier Ltd. All rights reserved.

Expression of recombinant human mutant granulocyte colony stimulating factor (Nartograstim) in Escherichia coli

The human granulocyte colony stimulating factor (hG-CSF) plays an important role in hematopoietic cell proliferation/differentiation and has been widely used as a therapeutic agent for treating neutropenias. Nartograstim is a commercial G-CSF that presents amino acid changes in specific positions when compared to the wildtype form, which potentially increase its activity and stability. The aim of this work was to develop an expression system in Escherichia coli that leads to the production of large amounts of a recombinant hG-CSF (rhG-CSF) biosimilar to Nartograstim. The nucleotide sequence of hg-csf was codon-optimized for expression in E. coli. As a result, high yields of the recombinant protein were obtained with adequate purity, structural integrity and biological activity. This protein has also been successfully used for the production of specific polyclonal antibodies in mice, which could be used in the control of the expression and purification in an industrial production process of this recombinant protein. These results will allow the planning of large-scale production of this mutant version of hG-CSF (Nartograstim), as a potential new biosimilar in the market.