Teores foliares de macro e micronutrientes em milho tolerante ao glyphosate submetido à herbicidas

A serial of factors related to development of glyphosate-tolerant corn should be approached and best studied. This work was developed to evaluate foliar levels of N, P, K, Ca, Mg, S, B, Cu, Fe, Mn and Zn, besides the grain yield of glyphosate-tolerant corn (DKB390 RR hybrid). An experiment was carried out under field conditions, during the crop year of 2010/2011. A randomized complete block design with four repetitions was used to distribute the treatments in the field. Twelve herbicide treatments were studied: glyphosate (720, 1200 and sequential application of 960 plus 720 g ha(-1) of the acid glyphosate equivalent), atrazine (2500 g ha(-1)), nicosulfuron (60 g ha(-1)), mesotrione (192 g ha(-1)), tembotrione (100,8 g ha(-1)), atrazine plus glyphosate (1000 + 960 g ha(-1)), atrazine plus nicosulfuron (1000 + 20 g ha(-1)), atrazine plus mesotrione (1000 + 144 g ha(-1)) and atrazine plus tembotrione (1000 + 75,6 g ha(-1)) and one control treatment without herbicide. The glyphosate and mesotrione alone did not cause no visible injury to corn. The other herbicides caused intoxication symptoms classified as light (<5%). The treatments studied did not affect foliar levels of N, P, K, Ca, Mg, S, B, Mn and Zn in the corn plants. But, the plants treated with atrazine plus nicosulfuron had more leaf Fe content, and the plants sprayed with glyphosate (in the three doses) and atrazine, more accumulation of Cu in the leaf. The Grain yield of corn was reduced with application single of glyphosate (1200 g ha(-1)), nicosulfuron, tembotrione and with the mixture atrazine plus nicosulfuron.

Textured macro- and mesoporous alumina samples designed in the presence of different surfactant types

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of the Extractant on the Complexing Capacity of Humic Substances from Peat for Macro and Micronutrients Using Continuous Flow: Agricultural Application and Environmental Impacts

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise macro e micrográfica da liga AA-356 conforme a taxa de resfriamento

The present work aims to study the characteristics of the alloy Al - 7 % Si - 0 , 3Mg ( AA356 ) , more specifically characterize the macrostructure and microstructure and mechanical properties of the alloy ingots AA356 obtained in metal molds and sand molds for power studying the structures through the difference of cooling rates . This alloy is explained by the fact of referring league has excellent combination of properties such as low solidification shrinkage and good fluidity, good weldability , high wear resistance , high strength to weight ratio, has wide application in general engineering , and particularly in the automotive and aerospace engineering . In this work we will verify this difference in properties through two different cooling rates . We monitor the solid solidification temperatures by thermocouples building with them the cooling curve as a tool that will aid us to evaluate the effectiveness of the grain refining because it achieved with some important properties of the alloy as the latent heat of solidification fraction the liquid and solid temperatures, the total solidification time, and identify the presence of inoculants for grain refinement. Thermal analysis will be supported by the study of graphic software “Origin “will be achieved where the cooling curve and its first derivative that is the cooling rate. Made thermal analysis, analysis will be made in macrographs ingots obtained for observation of macrostructures obtained in both types of ingots and also analysis of micrographs where sampling will occur in strategic positions ingots to correlate with the microstructure. Finally will be collecting data from Brinell hardness of ingots and so then correlating the properties of their respective ingots with cooling rate. We found that obtained with cast metal ingots showed superior properties to the ingots obtained with sand mold

Do micro ao macro: aproximações entre oriente e ocidente em Der Jahreslauf

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Does water level affect benthic macro-invertebrates of a marginal lake in a tropical river-reservoir transition zone?

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aluminas macro-mesoporosas produzidas pelo método sol-gel para aplicação em catálise heterogênea

Pós-graduação em Química - IQ

Síntese de aluminas macro-mesoporosas pelo método sol-gel acompanhado de separação de fases

Pós-graduação em Química - IQ

Morfologia macro e microscópica das papilas linguais do quati (Nasua nasua)

O quati (Nasua nasua) é um animal que pertence à Família Procyonidae. Foram utilizados três animais ortotanasiados, de ambos os sexos, provenientes do Criatório Científico de Animais Silvestres, Centro Universitário Fundação de Ensino Octávio Bastos (Cecrimpas, Unifeob) autorizado pelo IBAMA (Proc.02027.003731/04-76). Para a análise macroscópica, as línguas foram retiradas, analisadas e foto-documentadas. Para análise microscópica, as línguas foram processadas rotineiramente pela técnica de microscopia eletrônica de varredura e inclusão em Paraplast; pela técnica de microscopia de luz os fragmentos foram cortados em micrótomo, com espessura média de 5mm e corados em HE e Picrosírius com fundo de hematoxilina. Os resultados macroscópicos e microscópicos mostram que a língua do quati apresenta papilas filiformes, fungiformes, valadas e cônicas sendo estas distribuídas nas regiões rostralis, medialis e caudalis. Histologicamente, a língua do quati é revestida por um epitélio pavimentoso estratificado queratinizado apresentando camada basal, espinhosa, granulosa e córnea com fibras de músculos estriados esqueléticos longitudinais e transversais e diversas glândulas. De acordo com os resultados pode-se concluir que a língua do quati possui características macroscópicas e microscópicas semelhantes aos canídeos, tendo como diferença o número de papilas valadas e o grau de queratinização.

Parametric Analysis of Effective Material Properties of Thickness-Shear Piezoelectric Macro-Fibre Composites

A previous study on the characterization of effective material properties of a d(15) thickness-shear piezoelectric Macro-Fibre Composite (MFC) made of seven layers (Kapton, Acrylic, Electrode, Piezoceramic Fibre and Epoxy Composite, Electrode, Acrylic, Kapton) using a finite element homogenization method has shown that the packaging reduces significantly the shear stiffness of the piezoceramic material and, thus, leads to significantly smaller effective electromechanical coupling coefficient k(15) and piezoelectric stress constant e(15) when compared to the piezoceramic fibre properties. Therefore, the main objective of this work is to perform a parametric analysis in which the effect of the variations of fibre volume fraction, Epoxy elastic modulus, electrode thickness and active layer thickness on the MFC effective material properties is evaluated. Results indicate that an effective d(15) MFC should use relatively thick fibres having relatively high shear modulus and relatively stiff epoxy filler. On the other hand, the electrode thickness does not affect significantly the MFC performance.

Usable work of macro-scale cavities in liquids

It is shown that the generation of cavities in a liquid can produce usable work, which is illustrated by the stretching of a string. This work is done during the expansion of the cavity, and not with its collapse. Basic equations are presented for the movement of a device moved by the so called cavity events. A theoretical solution is also proposed, which uses polynomial functions relating the so called "excess of pressure" in the cavity and time. Evaluations of the force generated during the expansion of the cavity showed a mean peak value of about 58 N for the moving container, while measurements with the container fixed to a support showed a peak value of 476 N, considered somewhat overestimated, because high frequency oscillations seem to superpose the mean behavior. Simultaneous phenomena occurring during the cavity events are also described. Series of pictures of the experiments are presented.

Parametric analysis of effective material properties of thickness-shear piezoelectric macro-fibre composites

A previous study on the characterization of effective material properties of a d15 thickness-shear piezoelectric Macro-Fibre Composite (MFC) made of seven layers (Kapton, Acrylic, Electrode, Piezoceramic Fibre and Epoxy Composite, Electrode, Acrylic, Kapton) using a finite element homogenization method has shown that the packaging reduces significantly the shear stiffness of the piezoceramic material and, thus, leads to significantly smaller effective electromechanical coupling coefficient k15 and piezoelectric stress constant e15 when compared to the piezoceramic fibre properties. Therefore, the main objective of this work is to perform a parametric analysis in which the effect of the variations of fibre volume fraction, Epoxy elastic modulus, electrode thickness and active layer thickness on the MFC effective material properties is evaluated. Results indicate that an effective d15 MFC should use relatively thick fibres having relatively high shear modulus and relatively stiff epoxy filler. On the other hand, the electrode thickness does not affect significantly the MFC performance.

El cultivo de Macro- y Microalgas para el desarrollo de nuevas aplicaciones ecológicas y energéticas

[ES]En el escenario mundial de los últimos años, la necesidad de desarrollar soluciones sostenibles que ayuden a minimizar el aumento de los problemas medioambientales y energéticos, ha relanzado el interés por la utilización de macro- y microalgas cultivadas en sistemas basados en el aprovechamiento de la capacidad fotosintética que presentan estos organismos. Como ejemplos representativos se presentan: (1) el cultivo de macroalgas en sistemas de policultivo integrado y, (2) el cultivo de microalgas para la obtención de biocombustibles

Contribuciones al proceso de súper-resolución mediante técnicas de filtros selectivos, topología de macro-bloques adaptable y sistemas multi-cámara

Programa de doctorado: Ingeniería de Telecomunicación Avanzada