Vision 2020 - A whole life-cycle information management system for built environments

A whole life-cycle information management vision is proposed, the organizational requirements for the realization of the scenario is investigated. Preliminary interviews with construction professionals are reported. Discontinuities at information transfer throughout life-cycle of built environments are resulting from lack of coordination and multiple data collection/storage practices. A more coherent history of these activities can improve the work practices of various teams by augmenting decision making processes and creating organizational learning opportunities. Therefore, there is a need for unifying these fragmented bits of data to create a meaningful, semantically rich and standardized information repository for built environment. The proposed vision utilizes embedded technologies and distributed building information models. Two diverse construction project types (large one-off design, small repetitive design) are investigated for the applicability of the vision. A functional prototype software/hardware system for demonstrating the practical use of this vision is developed and discussed. Plans for case-studies for validating the proposed model at a large PFI hospital and housing association projects are discussed.

The energy-cycle analysis of the interactions between shallow and deep atmospheric convection

Interactions between different convection modes can be investigated using an energy–cycle description under a framework of mass–flux parameterization. The present paper systematically investigates this system by taking a limit of two modes: shallow and deep convection. Shallow convection destabilizes itself as well as the other convective modes by moistening and cooling the environment, whereas deep convection stabilizes itself as well as the other modes by drying and warming the environment. As a result, shallow convection leads to a runaway growth process in its stand–alone mode, whereas deep convection simply damps out. Interaction between these two convective modes becomes a rich problem, even when it is limited to the case with no large–scale forcing, because of these opposing tendencies. Only if the two modes are coupled at a proper level can a self–sustaining system arise, exhibiting a periodic cycle. The present study establishes the conditions for self–sustaining periodic solutions. It carefully documents the behaviour of the two mode system in order to facilitate the interpretation of global model behaviours when this energy–cycle is implemented as a closure into a convection parameterization in future.

A case study to investigate the life cycle carbon emissions and carbon storage capacity of a cross laminated timber, multi-storey residential building

Forests are a store of carbon and an eco-system that continually removes carbon dioxide from the atmosphere. If they are sustainably managed, the carbon store can be maintained at a constant level, while the trees removed and converted to timber products can form an additional long term carbon store. The total carbon store in the forest and associated ‘wood chain’ therefore increases over time, given appropriate management. This increasing carbon store can be further enhanced with afforestation. The UK’s forest area has increased continually since the early 1900s, although the rate of increase has declined since its peak in the late 1980s, and it is a similar picture in the rest of Europe. The increased sustainable use of timber in construction is a key market incentive for afforestation, which can make a significant contribution to reducing carbon emissions. The case study presented in this paper demonstrates the carbon benefits of a Cross Laminated Timber (CLT) solution for a multi-storey residential building in comparison with a more conventional reinforced concrete solution. The embodied carbon of the building up to completion of construction is considered, together with the stored carbon during the life of the building and the impact of different end of life scenarios. The results of the study show that the total stored carbon in the CLT structural frame is 1215tCO2 (30tCO2 per housing unit). The choice of treatment at end of life has a significant effect on the whole life embodied carbon of the CLT frame, which ranges from -1017 tCO2e for re-use to +153tCO2e for incinerate without energy recovery. All end of life scenarios considered result in lower total CO2e emissions for the CLT frame building compared with the reinforced concrete frame solution.

Time valued life cycle greenhouse gas emissions from buildings

The UK has adopted legally binding carbon reduction targets of 34% by 2020 and 80% by 2050 (measured against the 1990 baseline). Buildings are estimated to be responsible for more than 50% of greenhouse gas (GHG) emissions in the UK. These consist of both operational, produced during use, and embodied, produced during manufacture of materials and components, and during construction, refurbishments and demolition. A brief assessment suggests that it is unlikely that UK emission reduction targets can be met without substantial reductions in both Oc and Ec. Oc occurs over the lifetime of a building whereas the bulk of Ec occurs at the start of a building’s life. A time value for emissions could influence the decision making process when it comes to comparing mitigation measures which have benefits that occur at different times. An example might be the choice between building construction using low Ec construction materials versus building construction using high Ec construction materials but with lower Oc, although the use of high Ec materials does not necessarily imply a lower Oc. Particular time related issues examined here are: the urgency of the need to achieve large emissions reductions during the next 10 to 20 years; the earlier effective action is taken, the less costly it will be; future reduction in carbon intensity of energy supply; the carbon cycle and relationship between the release of GHG’s and their subsequent concentrations in the atmosphere. An equation is proposed, which weights emissions according to when they occur during the building life cycle, and which effectively increases Ec as a proportion of the total, suggesting that reducing Ec is likely to be more beneficial, in terms of climate change, for most new buildings. Thus, giving higher priority to Ec reductions is likely to result in a bigger positive impact on climate change and mitigation costs.

Business life cycle and capital structure: evidence from Chinese manufacturing firms

This paper uses a panel data-fixed effect approach and data collected from Chinese public manufacturing firms between 1999 and 2011 to investigate the impacts of business life cycle stages on capital structure. We find that cash flow patterns capture more information on business life cycle stages than firm age and have a stronger impact on capital structure decision-making. We also find that the adjustment speed of capital structure varies significantly across life cycle stages and that non-sequential transitions over life cycle stages play an important role in the determination of capital structure. Our study indicates that it is important for policy-makers to ensure that products and financial markets are well-balanced.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Avaliação de impactos e custos ambientais em processos industriais : uma abordagem metodológica

A preocupação com a qualidade ambiental aumentou significativamente nos últimos anos. Isso é evidenciado pela rígida legislação ambiental e pela mudança de comportamento da sociedade frente a esse assunto. Nesse contexto, as indústrias vêm sendo pressionadas a adequar seus processos produtivos às novas exigências. A fim de auxiliá-las nessa tarefa, várias metodologias de avaliação ambiental foram desenvolvidas, entre elas a Avaliação do Ciclo de Vida (Life Cycle Assessment – LCA). Ela se destaca por buscar soluções globais e efetivas para os problemas ambientais, através de uma análise sistêmica. No entanto, assim como outras metodologias, o LCA não apresenta uma avaliação econômica estruturada em conjunto com a ambiental. Esta dissertação tem a finalidade de contribuir para o preenchimento dessa lacuna, através do desenvolvimento de uma abordagem consistente e estruturada, capaz de avaliar simultaneamente impactos e custos ambientais em processos industriais. Para isso, foram utilizados como bases teóricas o LCA, o Modelo Econômico de Controle e Avaliação de Impactos Ambientais (MECAIA), a Metodologia para a Contabilidade do Gerenciamento Ambiental (Environmental Management Accounting – EMA), o Método de Custeio Baseado em Atividades (Activity Based Costing – ABC), a Avaliação de Riscos (Risk Assessment) e a Análise de Modos e Efeitos de Falhas (Failure Mode and Effects Analysis – FMEA). A abordagem desenvolvida foi aplicada em uma indústria do setor metal-mecânico para avaliar os impactos e os custos ambientais de seu processo produtivo, evidenciando que aparentemente há uma relação direta entre esses dois fatores, ou seja, os resíduos que geram maior impacto sobre o meio ambiente também apresentam maior custo associado Por fim, constatou-se que a combinação das metodologias, dos métodos e dos modelos utilizados permitiu a elaboração de uma abordagem capaz de orientar a análise de um processo produtivo, a fim de identificar quais as etapas que geram maior impacto sobre o meio ambiente, além de apurar os gastos ambientais e classificá-los nas categorias de prevenção, correção e geração.

The life-cycle effects of social security in a model with housing and endogenous benefits

This article develops a life-cycle general equilibrium model with heterogeneous agents who make choices of nondurables consumption, investment in homeowned housing and labour supply. Agents retire from an specific age and receive Social Security benefits which are dependant on average past earnings. The model is calibrated, numerically solved and is able to match stylized U.S. aggregate statistics and to generate average life-cycle profiles of its decision variables consistent with data and literature. We also conduct an exercise of complete elimination of the Social Security system and compare its results with the benchmark economy. The results enable us to emphasize the importance of endogenous labour supply and benefits for agents' consumption-smoothing behaviour.

Monopolies life cycle, bureaucratization, and Schumpeterian growth

This paper analyzes the links between the internaI organization of firms and macroeconomic growth. We present a Schumpeterian growth model in which firms face dynamic agency costs. These agency costs are due to the formation of vertical collusions within the organization. To respond to the opportunity of internaI collusion, firms go through a whole life cycle, getting more bureaucratized and Iess efficient over time. vVeak creative destruction in the economy facilitates informal collusion inside firms and exacerbates bureaucratization. As bureaucratization affects the firms' profitability and the return to innovation, stationary equilibrium growth depends in turn on the efficiency of collusive side-contracts within firms.

Life Cycle Models, Heterogeneity of Initial Assets,and Wealth Inequality

Life cycle general equilibrium models with heterogeneous agents have a very hard time reproducing the American wealth distribution. A common assumption made in this literature is that all young adults enter the economy with no initial assets. In this article, we relax this assumption – not supported by the data - and evaluate the ability of an otherwise standard life cycle model to account for the U.S. wealth inequality. The new feature of the model is that agents enter the economy with assets drawn from an initial distribution of assets, which is estimated using a non-parametric method applied to data from the Survey of Consumer Finances. We found that heterogeneity with respect to initial wealth is key for this class of models to replicate the data. According to our results, American inequality can be explained almost entirely by the fact that some individuals are lucky enough to be born into wealth, while others are born with few or no assets.

Life cycle and behaviour of the predaceous mite Cunaxatricha tarsospinosa (Acari: Prostigmata: Cunaxidae)

Life cycle and behaviour of Cunaxatricha tarsospinosa Castro & Den Heyer from rubber trees in Brazil were studied, with Tenuipalpus heveae Baker offered as prey. The study was conducted at 25.4 +/- A 0.2A degrees C, 83 +/- A 5% RH and 12:12 h L:D photophase. The egg stage was the longest immature stage, lasting 17.1 +/- A 1.3 days (mean +/- A SE); total juvenile development was completed in 33.2 +/- A 2.8 days. Lifetime fecundity was 12.0 +/- A 2.2 eggs. Intrinsic rate of population increase was low, suggesting that T. heveae may not be a good prey for the predator. All specimens of C. tarsospinosa collected in the field for this study were females, no males were found. Concurrently, only females were obtained in the laboratory. This seems to be the first report of thelytokous parthenogenesis for cunaxids. Similar to earlier reports for some Cunaxinae and Coleoscirinae, prey were captured when predators were actively searching for them.