Studies on design, fabrication and reliability assessment of embedded passives on a high-density interconnect (HDI) organic substrate using a sequential build-up process

One of the foremost design considerations in microelectronics miniaturization is the use of embedded passives which provide practical solution. In a typical circuit, over 80 percent of the electronic components are passives such as resistors, inductors, and capacitors that could take up to almost 50 percent of the entire printed circuit board area. By integrating passive components within the substrate instead of being on the surface, embedded passives reduce the system real estate, eliminate the need for discrete and assembly, enhance electrical performance and reliability, and potentially reduce the overall cost. Moreover, it is lead free. Even with these advantages, embedded passive technology is at a relatively immature stage and more characterization and optimization are needed for practical applications leading to its commercialization.This paper presents an entire process from design and fabrication to electrical characterization and reliability test of embedded passives on multilayered microvia organic substrate. Two test vehicles focusing on resistors and capacitors have been designed and fabricated. Embedded capacitors in this study are made with polymer/ceramic nanocomposite (BaTiO3) material to take advantage of low processing temperature of polymers and relatively high dielectric constant of ceramics and the values of these capacitors range from 50 pF to 1.5 nF with capacitance per area of approximately 1.5 nF/cm(2). Limited high frequency measurement of these capacitors was performed. Furthermore, reliability assessments of thermal shock and temperature humidity tests based on JEDEC standards were carried out. Resistors used in this work have been of three types: 1) carbon ink based polymer thick film (PTF), 2) resistor foils with known sheet resistivities which are laminated to printed wiring board (PWB) during a sequential build-up (SBU) process and 3) thin-film resistor plating by electroless method. Realization of embedded resistors on conventional board-level high-loss epoxy (similar to 0.015 at 1 GHz) and proposed low-loss BCB dielectric (similar to 0.0008 at > 40 GHz) has been explored in this study. Ni-P and Ni-W-P alloys were plated using conventional electroless plating, and NiCr and NiCrAlSi foils were used for the foil transfer process. For the first time, Benzocyclobutene (BCB) has been proposed as a board level dielectric for advanced System-on-Package (SOP) module primarily due to its attractive low-loss (for RF application) and thin film (for high density wiring) properties.Although embedded passives are more reliable by eliminating solder joint interconnects, they also introduce other concerns such as cracks, delamination and component instability. More layers may be needed to accommodate the embedded passives, and various materials within the substrate may cause significant thermo -mechanical stress due to coefficient of thermal expansion (CTE) mismatch. In this work, numerical models of embedded capacitors have been developed to qualitatively examine the effects of process conditions and electrical performance due to thermo-mechanical deformations.Also, a prototype working product with the board level design including features of embedded resistors and capacitors are underway. Preliminary results of these are presented.

Constructing Stability in Software Product Development during Organizational Restructurings

We all have fresh in our memory what happened to the IT sector only a few years ago when the IT-bubble burst. The upswing of productivity in this sector slowed down, investors lost large investments, many found themselves looking for a new job, and countless dreams fell apart. Product developers in the IT sector have experienced a large number of organizational restructurings since the IT boom, including rapid growth, downsizing processes, and structural reforms. Organizational restructurings seem to be a complex and continuous phenomenon people in this sector have to deal with. How do software product developers retrospectively construct their work in relation to organizational restructurings? How do organizational restructurings bring about specific social processes in product development? This working paper focuses on these questions. The overall aim is to develop an understanding of how software product developers construct their work during organizational restructurings. The theoretical frame of reference is based on a social constructionist approach and discourse analysis. This approach offers more or less radical and critical alternatives to mainstream organizational theory. Writings from this perspective attempt to investigate and understand sociocultural processes by which various realities are created. Therefore these studies aim at showing how people participate in constituting the social world (Gergen & Thatchenkery, 1996); knowledge of the world is seen to be constructed between people in daily interaction, in which language plays a central role. This means that interaction, especially the ways of talking and writing about product development during organizational restructurings, become the target of concern. This study consists of 25 in-depth interviews following a pilot study based on 57 semi-structured interviews. In this working paper I analyze 9 in-depth interviews. The interviews were conducted in eight IT firms. The analysis explores how discourses are constructed and function, as well as the consequences that follow from different discourses. The analysis shows that even though the product developers have experienced many organizational restructurings, some of which have been far-reaching, their accounts build strongly on a stability discourse. According to this discourse product development is, perhaps surprisingly, not influenced to a great extent by organizational restructurings. This does not mean that product development is static. According to the social constructionist approach, product development is constantly being reproduced and maintained in ongoing processes. In other words stable effects are also ongoing achievements and these are of particular interest in this study. The product developers maintain rather than change the product development through ongoing processes of construction, even when they experience continuous extensive organizational restructurings. The discourse of stability exists alongside other discourses, some which contradict each other. Together they direct product development and generate meanings. The product developers consequently take an active role in the construction of their work during organizational restructurings. When doing this they also negotiate credible positions for themselves

Assessment of In-House Natural Product and Synthetic Compound Libraries Based on In vitro Inhibition of Cholinesterases

The first line medication for mild to moderate Alzheimer s disease (AD) is based on cholinesterase inhibitors which prolong the effect of the neurotransmitter acetylcholine in cholinergic nerve synapses which relieves the symptoms of the disease. Implications of cholinesterases involvement in disease modifying processes has increased interest in this research area. The drug discovery and development process is a long and expensive process that takes on average 13.5 years and costs approximately 0.9 billion US dollars. Drug attritions in the clinical phases are common due to several reasons, e.g., poor bioavailability of compounds leading to low efficacy or toxic effects. Thus, improvements in the early drug discovery process are needed to create highly potent non-toxic compounds with predicted drug-like properties. Nature has been a good source for the discovery of new medicines accounting for around half of the new drugs approved to market during the last three decades. These compounds are direct isolates from the nature, their synthetic derivatives or natural mimics. Synthetic chemistry is an alternative way to produce compounds for drug discovery purposes. Both sources have pros and cons. The screening of new bioactive compounds in vitro is based on assaying compound libraries against targets. Assay set-up has to be adapted and validated for each screen to produce high quality data. Depending on the size of the library, miniaturization and automation are often requirements to reduce solvent and compound amounts and fasten the process. In this contribution, natural extract, natural pure compound and synthetic compound libraries were assessed as sources for new bioactive compounds. The libraries were screened primarily for acetylcholinesterase inhibitory effect and secondarily for butyrylcholinesterase inhibitory effect. To be able to screen the libraries, two assays were evaluated as screening tools and adapted to be compatible with special features of each library. The assays were validated to create high quality data. Cholinesterase inhibitors with various potencies and selectivity were found in natural product and synthetic compound libraries which indicates that the two sources complement each other. It is acknowledged that natural compounds differ structurally from compounds in synthetic compound libraries which further support the view of complementation especially if a high diversity of structures is the criterion for selection of compounds in a library.

'... the walls fell down but the blokes just coded ...' - Varieties of stability in software product development during organizational restructurings

Many Finnish IT companies have gone through numerous organizational changes over the past decades. This book draws attention to how stability may be central to software product development experts and IT workers more generally, who continuously have to cope with such change in their workplaces. It does so by analyzing and theorizing change and stability as intertwined and co-existent, thus throwing light on how it is possible that, for example, even if ‘the walls fall down the blokes just code’ and maintain a sense of stability in their daily work. Rather than reproducing the picture of software product development as exciting cutting edge activities and organizational change as dramatic episodes, the study takes the reader beyond the myths surrounding these phenomena to the mundane practices, routines and organizings in product development during organizational change. An analysis of these ordinary practices offers insights into how software product development experts actively engage in constructing stability during organizational change through a variety of practices, including solidarity, homosociality, close relations to products, instrumental or functional views on products, preoccupations with certain tasks and humble obedience. Consequently, the study shows that it may be more appropriate to talk about varieties of stability, characterized by a multitude of practices of stabilizing rather than states of stagnation. Looking at different practices of stability in depth shows the creation of software as an arena for micro-politics, power relations and increasing pressures for order and formalization. The thesis gives particular attention to power relations and processes of positioning following organizational change: how social actors come to understand themselves in the context of ongoing organizational change, how they comply with and/or contest dominant meanings, how they identify and dis-identify with formalization, and how power relations often are reproduced despite dis-identification. Related to processes of positioning, the reader is also given a glimpse into what being at work in a male-dominated and relatively homogeneous work environment looks like. It shows how the strong presence of men or “blokes” of a particular age and education seems to become invisible in workplace talk that appears ‘non-conscious’ of gender.

Photochemical, photophysical, and theoretical studies on cyclobutanethiones..alpha.-Cleavage reactions

Photophysics and photochemistry of cyclobutanethiones 1-5 have been studied with the view to generalize the a-cleavage reactions of cyclobutanethiones. The above cyclobutanethiones possess a unit intersystem crossing efficiency from S1 to T1, a high self-quenching rate (-4 X lo9 M-' s-'), and a short triplet lifetime (<0.50 ws). Photolysis of 1-5 yields in benzene a product resulting from 1,3-transposition and in methanol two cyclic thioacetals.The origin of these products is traced to the triplet excited state. A mechanistic scheme involving a-cleavage as the primary photoprocess and diradicals and thiacarbenes as intermediates has been formulated to rationalize the formation of thioacetals and rearranged products. The proposed mechanistic scheme is supported by UHF MIND013 calculations performed on four model systems, cyclobutanethiones and 1,3-cyclobutanedithiones 18-21. These calculations indicate that formation of diradical is favored thermodynamically and kinetically for systems analogous to 19 and 21, while rearrangement to thiacarbene is likely only for those similar to 21.

Photochemistry of .alpha.,.beta.-unsaturated thiones: addition to electron-rich olefins from T1

1,1,3-Trimethyl-2-thioxo-1,2-dihydronaphthale(1n)e adds to electron-rich olefins upon excitation to either Sz (PP*) or Sl (ns*) states. Excitation to S2 level resulted in the same mixture of products, namely thietane and 1,4-dithiane, as on excitation to S1 level. Addition occurs to the thiocarbonyl function and not to the carbon-carbon double bond. The addition is site-specific, and the formation of thietane is regiospecific. The ratio of thietane to 1,4-dithiane in the product mixture is dependent on the concentration of the thioenone. The addition is suggested to originate from the lowest triplet state (Tl) and involves diradical intermediates.

An Eventful Synthetic Approach Towards the Biologically Potent Natural Product Ottelione A: Enantio-, Regio- and Stereoselective Construction of the Bicyclic Core

A novel synthetic approach towards the recently reported anti-tumor and anti-tuberculor natural product ottelione A from the readily available Diels-Alder adduct of cyclopentadiene and p-benzoquinone is delineated. Our short strategy, besides being enantio-, regio- and stereoselective, charts an eventful course and is inherently well-suited for adaptation towards diverse synthetic analogues of this biologically potent natural product.