Magnetic field and current distributins in melt-textured YBa 2Cu 3O 7-x with an artificial grain boundary

Using a magneto-optical (MO) technique, magnetic field distributions have been measured in a melt-textured YBa 2Cu 3O 7-x bulk superconductor, joined to form an artificial grain boundary (GB), in an external magnetic field perpendicular to the sample surface. The magnetic field at a weak section of the GB shows different values between the field increasing up to 150mT and decreasing down to 0T after zero-field-cooling. Namely, the magnetic field in increasing field is higher than that in decreasing field, even in the same external field. This result supports a model in which such differences in magnetic field at the weak-link GB give rise to the hysteresis behavior in the field dependence of transport critical current density in polycrystalline samples. The field distributions across a well-joined region of the GB behave similarly to the adjoining bulk material and this result indicates the possibility of creating useful artifacts provided that the strongly coupled sections can be reproduced on a larger scale.

Variability of nanoindentation responses of bone and artificial bone-like composites

Nanoindentation is a popular technique for measuring the intrinsic mechanical response of bone and has been used to measure a single-valued elastic modulus. However, bone is a composite material with 20-80 nm hydroxyapatite plates embedded in a collagen matrix, and modern instrumentation allows for measurements at these small length scales. The present study examines the indentation response of bone and artificial gelatin-apatite nanocomposite materials across three orders of magnitude of lengthscale, from nanometers to micrometers, to isolate the composite phase contributions to the overall response. The load-displacement responses were variable and deviated from the quadratic response of homogeneous materials at small depths. The distribution of apparent elastic modulus values narrowed substantially with increasing indentation load. Indentation of particulate nanocomposites was simulated using finite element analysis. Modeling results replicated the convergence in effective modulus seen in the experiments. It appears that the apatite particles are acting as the continuous ("matrix") phase in bone and nanocomposites. Copyright © 2004 by ASME.

Probiotics and nutrient supplement in artificial feed of gold fish (Carassius auratus)

The efficacy of three feeds incorporated with different probiotics -Lactobacil, Vizylac and Cyfolac as nutrient supplement was evaluated in an ornamental fish, Carassius auratus (Linn.). The basal diet (40% protein) was prepared and the probiotics were incorporated at different levels viz. Lactobacil at 8x10 super(7)/100g and 12x10 super(7)/100g, Vizylac at 8x10 super(7)/100g and 12x10 super(7)/100g and Cyfolac at 12x10 super(7)/100g. Feeding trial was conducted for a period of 4 weeks. At the end of the experiment, bio-growth parameters and proximate composition of the fishes were studied. The growth, survival and protein content were improved in all the probiotic fed fishes compared to control. The maximum growth (0.74 g) and survival (85%) were observed in fishes fed with Lactobacil at 12x10 super(7)/100g. It emphasizes that supplementation of feed with probiotics has a positive impact on the growth, survival and the body composition of goldfish.

Natural versus artificial scene classification by ordering discrete fourier power spectra

Holistic representations of natural scenes is an effective and powerful source of information for semantic classification and analysis of arbitrary images. Recently, the frequency domain has been successfully exploited to holistically encode the content of natural scenes in order to obtain a robust representation for scene classification. In this paper, we present a new approach to naturalness classification of scenes using frequency domain. The proposed method is based on the ordering of the Discrete Fourier Power Spectra. Features extracted from this ordering are shown sufficient to build a robust holistic representation for Natural vs. Artificial scene classification. Experiments show that the proposed frequency domain method matches the accuracy of other state-of-the-art solutions. © 2008 Springer Berlin Heidelberg.

Construction and characterization of bacterial artificial chromosome library of black-handed spider monkey (Ateles geoffroyi)

The large-insert genomic DNA library is a critical resource for genome-wide genetic dissection of target species. We constructed a high-redundancy bacterial artificial chromosome (BAC) library of a New World monkey species, the black-handed spider monkey

Construction, characterization and chromosomal mapping of bacterial artificial chromosome (BAC) library of Yunnan snub-nosed monkey (Rhinopithecus bieti)

We constructed a high redundancy bacterial artificial chromosome library of a seriously endangered Old World Monkey, the Yunnan snub-nosed monkey (Rhinopithecus bieti) from China. This library contains a total of 136 320 BAC clones. The average insert size of BAC clones was estimated to be 148 kb. The percentage of small inserts (50-100 kb) is 2.74%, and only 2.67% non-recombinant clones were observed. Assuming a similar genome size with closely related primate species, the Yunnan snub-nosed monkey BAC library has at least six times the genome coverage. By end sequencing of randomly selected BAC clones, we generated 201 sequence tags for the library. A total of 139 end-sequenced BAC clones were mapped onto the chromosomes of Yunnan snub-nosed monkey by fluorescence in-situ hybridization, demonstrating a high degree of synteny conservation between humans and Yunnan snub-nosed monkeys. Blast search against human genome showed a good correlation between the number of hit clones and the size of the chromosomes, an indication of unbiased chromosomal distribution of the BAC library. This library and the mapped BAC clones will serve as a valuable resource in comparative genomics studies and large-scale genome sequencing of nonhuman primates. The DNA sequence data reported in this paper were deposited in GenBank and assigned the accession number CG891489-CG891703.

Development of artificial breeding techniques for long-whiskered catfish, Sperata aor and giant river catfish, Sperata seenghala of Bangladesh

Sperata aor and S. seenghala are the two important native catfishes of Bangladesh but commercial farming of these species is not possible due to lack of naturally collected or artificially produced seeds for stocking. Attempts were made to develop techniques for seed production by artificial breeding and nursery-rearing of fries of these catfishes. A total of 60 S. seenghala (750-1,500 g) and 10 S. aor (600-1,000 g) broods were collected from the Brahmaputra river-basin and floodplains in Mymensingh region four months prior to their breeding season. The collected brood fishes were reared in separate earthen ponds with supplementary feeds comprising of rice bran (40%), mustard oil cake (29%), fish meal (30%) and vitamin-premix (1 %). Three experiments were conducted to optimize the hormone dose. A total of nine S. seenghala females weighing from 750 to 1,500 g were given an initial and resolving dose of 12-20 and 16-24 mg PG/kg body weight, respectively. The males weighing from 650-950 g were administered a single dose of 18-26 mg PG/kg body weight at the time of the time of administering the resolving dose to the females. The females ovulated partially and the eggs were examined under a compound microscope, but most of them were found to be less ripe or damaged. Collection of milt by stripping the males was not successful. The testes were taken out and sperm were observed to be non-motile and less developed. In view of stimulating natural propagation of S. seenghala, artificial holes (nests) were constructed in the pond bottom. Each hole was 0.7 m in diameter and 0.3 m in depth. A total of 10 holes were made and then 10 pairs of S. seenghala breeders (800-1,200 g) were stocked in the pond. In mid February, 3,000 fry of S. seenghala with a mean length of 4.60 cm and weight of 0.36 g were collected by repeated netting followed by drying of the pond. The fry were then stocked in a nursery pond and fed with commercial feed (SABINCO starter-1). The average length and weight of the fingerlings were 9.01 cm and 3.95 g, respectively and the estimated survival was 60% after two months of rearing. S. aor did not respond to natural spawning. Further study is essential to develop techniques for their successful artificial and natural breeding.

Reproductive biology, artificial propagation and larval rearing of two freshwater eels, Monopterus cuchia and Mastacembelus armatus

Studies on reproductive biology and artificial propagation including larval rearing of freshwater mud eel, Monopterus cuchia and spiny eel, Mastacembelus armatus were attempted. The gonadosomatic index (GSI) of mud eel ranged from 0.41 (August) to 5.52 (June) in males and 0.53 (August) to 7.61 (June) in females. In both cases the GSI showed a peak in June. Fecundity ranged from 228 (TL - 396 mm; W - 78g) to 5510 (TL - 865 mm; W - 630 g). In case of spiny eel, the GSI varied from 0.65 (August) to 8.30 (July) in males and 0.70 (August) to 10.46 (July) in females. GSI showed single peak in July. Fecundity ranged from 570 (TL - 240 mm; W - 30 g) to 10870 (TL - 601; W - 350g). Histology of the testes and ovaries of the eels were carried out to investigate the gonadal development stages during the reproductive months (August to November 2003). In case of male M. cuchia, the secondary primordial germ cells, primary spermatogonium, some spermatogonia A and clone of spermatogonium B in testis were observed in September. In October-males different sized lobules having spermatogonia, spermatocytes and spermatids were observed. In the ovary of M. cuchia, polygonal shaped oocytes were seen during September. The oogonia were reduced with dense and irregular shaped during October. Numerous pycnotic cells were visible during November. In male M. armatus numerous broken lobule walls were found in testes during September. In October, abundant primary germ cells, pycnotic nests of degenerating cells, spermatogonia and spermatids were observed. In females, ovaries had distinct yolk vesicles stage and yolk granules stages in August. In September, the follicular cells of the oogonia were ruptured, shrunk forming irregular shaped in October. Oogonia were also shrunk with thin, irregular shaped structure but broken parts of the ruptured follicular cells were scattered in case of M. armatus. Experimental attempts on artificial propagation indicated that both freshwater eels were difficult to breed using inducing agents like pituitary glands (PG) of 10, 20, 50, 100 and 150 mg per kg of body weight. Same doses were used for both sexes with equal sex-ratio. In both cases, brood fish died at higher doses of injection given at 100 and 150 mg PG/kg bodyweight. However, M. cuchia breed naturally in cisterns when provided with water hyacinths and tunnel in muddy bottom. M. cuchia fed with chopped cooked fish attained a mean weight of 18.75 ± 2.3 g and cent percent survival. While in case of M. armatus best growth by weight (12.0 ± 2.48 g) and cent percent survival were achieved using chopped raw fish. Car tyre was observed as best shelter for attaining the mean weight gain 22.53 ± 2.24 g and cent percent survival of M. cuchia. While PVC pipe was found to be the best shelter for M. armatus, where it attained the mean weight of 12.73 ± 1.88 g and cent percent survival.

Self-assembled artificial pinning centres in thick YBCO superconducting films

Strong, artificial pinning centres are required in superconducting films of large thickness for power applications in high magnetic fields. One of the methods for the introduction of pinning centres in such films is substrate decoration, i.e., growing nanoscale islands of certain materials on the substrate prior to the deposition of the superconducting film. Two other methods are building up a layered distribution of a second phase and homogeneous incorporation of second phase inclusions from a compositional target. In this paper, we compare the effectiveness of these methods in terms of the type of the self-assembly of nanoparticles. The comparison is made over a large set of YBa2Cu3O7 films of thickness up to 6.6 μm deposited with Au, Ag, Pd, LaNiO3, PrBa2Cu 3O7, YBCO, BaZrO3 and Gd2Ba 4CuWOy nanoparticles. It is found that substrate-decoration self-assembly is able to provide higher critical current in low magnetic field than the incorporation of homogeneous second phase in the sample microstructure. By specific modification of substrate decoration we achieved the self-field critical current per centimetre of width of 896 A/cm at 77.3 K and 1620 A/cm at 65 K in a film of thickness of 4.8 μm. © 2010 IOP Publishing Ltd.

Introduction to the development of an information management system for soil mix technology using artificial neural networks

This paper introduces current work in collating data from different projects using soil mix technology and establishing trends using artificial neural networks (ANNs). Variation in unconfined compressive strength as a function of selected soil mix variables (e.g., initial soil water content and binder dosage) is observed through the data compiled from completed and on-going soil mixing projects around the world. The potential and feasibility of ANNs in developing predictive models, which take into account a large number of variables, is discussed. The main objective of the work is the management and effective utilization of salient variables and the development of predictive models useful for soil mix technology design. Based on the observed success in the predictions made, this paper suggests that neural network analysis for the prediction of properties of soil mix systems is feasible. © ASCE 2011.

Effect of sublethal concentration of artificial seawater on oxygen uptake and opercular frequency in an Indian major carp, Labeo rohita (Ham.)

The present study reports the effect of artificial seawater on oxygen uptake and opercular frequency in an Indian major carp, Labeo rohita. Whereas a control fish of 7.34 g average body weight consumed 1.538 ml O sub(2.) hˉ¹, the 24h and 96h exposed fish of the same body weight consumed 1.07 4 and 0.897 ml O sub(2.) hˉ¹, respectively. The oxygen uptake per unit body weight under controlled condition was 0.219 ml. gˉ¹. hˉ¹, whereas in 24h and 96h exposed fish, it was 0.152 and 0.124 ml. gˉ¹, hˉ¹, respectively. The change in opercular movement in 24h exposed fish was 7.67% higher, whereas in 96h exposed fish, it was 22.43% higher as compared to the control one. All changes are highly significant (p<0.001).

Microbiological evaluation and keeping quality of fishes reared in livestock sewage fed ponds without artificial feed

Livestock sewage has been utilized for fish culture. There is lack of information on microbiological evaluation and keeping quality of these fishes. This paper reveals the incidence, types of micro-organisms and keeping quality of fishes reared in livestock sewage fed ponds without artificial feed. These fishes revealed microbial incidence and keeping quality comparable to other fishes. Initial mesophilic and psychrophilic counts varied from 3.38 to 5.56 and 2.47 to 4.74. On an average, the counts reduced by about 40% after evisceration and washing. Whole as well as washed fishes had refrigerated (8 ± 1°C) life of not more than 4 days. The average psychrophilic and mesophilic counts of ice (0 to 1°C) stored whole fishes up to 10th day varied from 3.66 to 4.81, 4.61 to 5.24 and in eviscerated and washed fishes 2.17 to 3.69 and 2.78 to 4.41. Both remained acceptable till the 10th day. Qualitative study of surface slime and gills revealed presence of Aerobacter (Enterobacter), Aeromonas, Alcaligenes, Bacillus, Clostridia, E. coli, Klebsiella, Micrococci, Proteus and Pseudomonas.