Efeito da radiação micro-ondas na sinterização em fases sólida e líquida de pós de aço inoxidável 3I6L

Tese submetida à Universidade de Coimbra, Faculdade de Ciências e Tecnologia e aprovada em provas públicas para a obtenção do Grau de Doutor em Engenharia Mecânica (especialidade de Ciência dos Materiais)

Persistent localized states for a chaotically mixed bistable reaction

We describe the evolution of a bistable chemical reaction in a closed two-dimensional chaotic laminar flow, from a localized initial disturbance. When the fluid mixing is sufficiently slow, the disturbance may spread and eventually occupy the entire fluid domain. By contrast, rapid mixing tends to dilute the initial state and so extinguish the disturbance. Such a dichotomy is well known. However, we report here a hitherto apparently unremarked intermediate case, a persistent highly localized disturbance. Such a localized state arises when the Damkoehler number is great enough to sustain a "hot spot," but not so great as to lead to global spread. We show that such a disturbance is located in the neighborhood of an unstable periodic orbit of the flow, and we describe some limited aspects of its behavior using a reduced, lamellar model. Copyright American Physical Society (APS) 2006.

The Southeast Indian Ridge between 88°E and 118°E: Gravity anomalies and crustal accretion at intermediate spreading rates

Although slow spreading ridges characterized by a deep axial valley and fast spreading ridges characterized by an axial bathymetric high have been extensively studied, the transition between these two modes of axial morphology is not well understood. We conducted a geophysical-survey of the intermediate spreading rate Southeast Indian Ridge between 88 degrees E and 118 degrees E, a 2300-km-long section of the ridge located between the Amsterdam hot spot and the Australian-Antarctic Discordance where satellite gravity data suggest that the Southeast Indian Ridge (SEIR) undergoes a change from an axial high in the west to an axial valley in the east. A basic change in axial morphology is found near 103 degrees 30'E in the shipboard data; the axis to the west is marked by an axial high, while a valley is found to the east. Although a well-developed axial high, characteristic of the East Pacific Rise (EPR), is occasionally present, the more common observation is a rifted high that is lower and pervasively faulted, sometimes with significant (> 50 m throw) faults within a kilometer of the axis. A shallow axial valley (< 700 m deep) is observed from 104 degrees E to 114 degrees E with a sudden change to a deep (>1200 m deep) valley across a transform at 114 degrees E. The changes in axial morphology along the SEIR are accompanied by a 500 m increase in near-axis ridge flank depth from 2800 m near 88 degrees E to 3300 m near 114 degrees E and by a 50 mGal increase in the regional level of mantle Bouguer gravity anomalies over the same distance, The regional changes in depth and mantle Bouguer anomaly (MBA) gravity can be both explained by a 1.7-2.4 km change in crustal thickness or by a mantle temperature change of 50 degrees C-90 degrees C. In reality, melt supply (crustal thickness) and mantle temperature are linked, so that changes in both may occur simultaneously and these estimates serve as upper bounds. The along-axis MBA gradient is not uniform. Pronounced steps in the regional level of the MBA gravity occur at 103 degrees 30'E-104 degrees E and at 114 degrees E-116 degrees E and correspond to the changes in the nature of the axial morphology and in the amplitude of abyssal hill morphology suggesting that the different forms of morphology do not grade into each other but rather represent distinctly different forms of axial (s)tructure and tectonics with a sharp transition between them. The change from an axial high to an axial valley requires a threshold effect in which the strength of the lithosphere changes quickly. The presence or absence of a quasi-steady state magma chamber may provide such a mechanism. The different forms of axial morphology are also associated with different intrasegment MBA gravity patterns. Segments with an axial high have an MBA low located at a depth minimum near the center of the segment, At EPR-like segments, the MBA low is about 10 mGal with along-axis gradients of 0.15-0.25 mGal/km, similar to those observed at the EPR, Rifted highs have a shallower low and lower gradients suggesting an attenuated composite magma chamber and a reduced and perhaps episodic melt supply. Segments with a shallow axial valley have very flat along-axis MBA profiles with little correspondence between axial depth and axial MBA gravity.

Vector analysis of porosity evidences bone loss at the epiphysis in the BTX rat model of disuse osteoporosis

International audience

The taxonomy, zoogeography and ecology of amphibians and reptiles of Hin Nam No National Protected Area (Laos) in comparison with data from Phong Nha – Ke Bang National Park (Vietnam).

In this thesis the mostly unknown herpetofauna in Hin Nam No National Protected Area Laos in the northern Truong Son Range was for the first time intensively investigated, and its diversity was compared to the bordering, and well-investigated Phong Nha - Ke Bang National Park in Vietnam. Twelve new vertebrate species were described comprising 11 geckonids (Cyrtodactylus bansocensis, C. calamei, C. hinnamnoensis, C. jaegeri, C. rufford, C. sommerladi, C. soudthichaki, Gekko boehmei, G. bonkowskii, G. sengchanthavongi, G. thakhekensis, Lycodon banksi and one colubrid snake (Lycodon banksi). Seven species were discovered for the first time in Laos including three frogs (Gracixalus quyeti, G. supercornutus, Rhacophorus maximus), two geckos (Cyrtodactylus cryptus, C. pseudoquadrivirgatus) and two snakes (Lycodon futsingensis, L. ruhstrati abditus). The main hypothesis that the Truong Son Range acted as a biogeographic barrier for the distribution of amphibians and reptiles could be confirmed at least for karst adapted gekkonids. Compared to other herpetofaunal groups the number of gekkonids in karst formations was particularly high (seven bent-toed geckos, four true geckos). By comparing the relative amounts of shared species in Hin Nam No and Phong Nha - Ke Bang, it is interesting to note that fewer reptile species (38%) than amphibian species (66%) were shared between both regions. This might indicate that the Truong Son Range acts as a stronger biogeographical barrier for reptiles than for amphibians. Two pairs of karst-adapted cryptic gecko species (i.e. species with distinct genetic differences, but a similar phenotype) occurred on both sides of the Truong Son Range. Only in one case these were sibling species (Crytodactylus sommerladi in Laos versus C. roesleri in Vietnam), but not in the other (C. hinnamnoensis in Laos versus C. phongnhakebangensis in Vietnam). On the Laotian side, nine gecko species (Cyrtodactylus bansocensis, C. calamei, C. darevskii, C. hinnamnoensis, C. khammouanensis, C. multiporus, C. sommerladi, G. boehmei, G. sengchanthavongi) currently have to be regarded as endemic to the Hin Nam No region. On the Vietnamese side, seven species including two bent-toed geckos (Cyrtodactylus phongnhakebangensis and C. roesleri), three skinks (Lygosoma boehmei, Sphenomorphus tetradactylus and Tropidophorus noggei), and two snakes (Hebius andreae and Boiga bourreti) are currently only known from Phong Nha - Ke Bang and adjacent regions. These high numbers of potential endemic species together with the cryptic species complex in Cyrtodactylus provide strong evidence that the karst formations in the northern Truong Son Range represent a hot spot of reptile diversity and of speciation in Crytodactylus in particular. Correct species identification is a fundamental requirement for conservation measures. The discovery of cryptic species complexes poses a challenge for alpha taxonomy and species conservation, because the true distribution ranges of the species are in fact much smaller than previously assumed. Species conservation in this area of Laos is facing a number of further problems. New and potentially endemic species were discovered in highly populated and disturbed areas. Conversion of the Ho Chi Minh Trail into a highway provided easy access for farmers and still continues to accelerate the destruction of remote forest areas. Southern Hin Nam No with its high diversity of endemic species was identified as the first priority area for conservation. Also Ban Soc, an area isolated from Hin Nam No, should be among the conservation priorities because this region houses a so far overlooked population of the critically endangered Siamese crocodile. Efforts to establish a legal conservation status for this habitat are in progress.

Sensor psychrometric approaches to mitigating aflatoxins in maize dried on farms in Kenya

Kenia liegt in den Äquatorialtropen von Ostafrika und ist als ein weltweiter Hot-Spot für Aflatoxinbelastung insbesondere bei Mais bekannt. Diese toxischen und karzinogenen Verbindungen sind Stoffwechselprodukte von Pilzen und so insbesondere von der Wasseraktivität abhängig. Diese beeinflusst sowohl die Trocknung als auch die Lagerfähigkeit von Nahrungsmitteln und ist somit ein wichtiger Faktor bei der Entwicklung von energieeffizienten und qualitätsorientierten Verarbeitungsprozessen. Die vorliegende Arbeit hat sich zum Ziel gesetzt, die Veränderung der Wasseraktivität während der konvektiven Trocknung von Mais zu untersuchen. Mittels einer Optimierungssoftware (MS Excel Solver) wurde basierend auf sensorerfassten thermo-hygrometrischen Daten der gravimetrische Feuchteverlust von Maiskolben bei 37°C, 43°C und 53°C vorausberechnet. Dieser Bereich stellt den Übergang zwischen Niedrig- und Hochtemperaturtrocknung dar. Die Ergebnisse zeigen deutliche Unterschiede im Verhalten der Körner und der Spindel. Die Trocknung im Bereich von 35°C bis 45°C kombiniert mit hohen Strömungsgeschwindigkeiten (> 1,5 m / s) begünstigte die Trocknung der Körner gegenüber der Spindel und kann daher für eine energieeffiziente Trocknung von Kolben mit hohem Anfangsfeuchtegehalt empfohlen werden. Weitere Untersuchungen wurden zum Verhalten unterschiedlicher Schüttungen bei der bei Mais üblichen Satztrocknung durchgeführt. Entlieschter und gedroschener Mais führte zu einem vergrößerten Luftwiderstand in der Schüttung und sowohl zu einem höheren Energiebedarf als auch zu ungleichmäßigerer Trocknung, was nur durch einen erhöhten technischen Aufwand etwa durch Mischeinrichtungen oder Luftumkehr behoben werden könnte. Aufgrund des geringeren Aufwandes für die Belüftung und die Kontrolle kann für kleine landwirtschaftliche Praxisbetriebe in Kenia daher insbesondere die Trocknung ganzer Kolben in ungestörten Schüttungen empfohlen werden. Weiterhin wurde in der Arbeit die Entfeuchtung mittels eines Trockenmittels (Silikagel) kombiniert mit einer Heizquelle und abgegrenztem Luftvolumen untersucht und der konventionellen Trocknung gegenüber gestellt. Die Ergebnisse zeigten vergleichbare Entfeuchtungsraten während der ersten 5 Stunden der Trocknung. Der jeweilige Luftzustand bei Verwendung von Silikagel wurde insbesondere durch das eingeschlossene Luftvolumen und die Temperatur beeinflusst. Granulierte Trockenmittel sind bei der Maistrocknung unter hygienischen Gesichtspunkten vorteilhaft und können beispielsweise mit einfachen Öfen regeneriert werden, so dass Qualitätsbeeinträchtigungen wie bei Hochtemperatur- oder auch Freilufttrocknung vermieden werden können. Eine hochwertige Maistrocknungstechnik ist sehr kapitalintensiv. Aus der vorliegenden Arbeit kann aber abgeleitet werden, dass einfache Verbesserungen wie eine sensorgestützte Belüftung von Satztrocknern, der Einsatz von Trockenmitteln und eine angepasste Schüttungshöhe praktikable Lösungen für Kleinbauern in Kenia sein können. Hierzu besteht, ggf. auch zum Aspekt der Verwendung regenerativer Energien, weiterer Forschungsbedarf.

O mercado de amêndoas de babaçu no Estado do Maranhão.

As amêndoas de babaçu representam um expressivo recurso do extrativismo vegetal no Brasil, no Maranhão o maio estado produtor, a atividade é essencial para as populações rurais. O presente estudo tem por objetivos: (i) Construir a dinâmica espaço-temporal da produção de amêndoas de babaçu; (ii) Estimar o comportamento da produção e preços das amêndoas de babaçu e tendência no mercado de óleos e (iii) Identificar os determinantes da oferta e da demanda de amêndoas de babaçu. Os resultados da Análise Hot Spot indicam tendências de concentração espaço-temporal das atividades de uso do solo no Maranhão. No extremo noroeste até o litoral ocidental aparece o cold spot para todas as categorias de uso do solo, sendo recoberto por APAs com a finalidade de proteger os ecossistemas lacustres. Somente para a produção de amêndoas de babaçu surge um segundo cold spot a partir de 1992 na confluência das regiões oeste, centro e sul do estado sugerindo a vulnerabilidade do extrativismo do babaçu em relação às outras categorias de utilização das terras. Entre os produtos estudados com relação a concorrência com as amêndoas de babaçu para o mercado de óleos, as culturas do coco e do dendê e a importação de óleo de palmiste apresentaram Taxa Geométrica de Crescimento (TGC) crescente para a produção e TGC decrescente para o preço. A TGC para a importação do óleo de palma e óleo de coco não foram significativas. A TGC para a produção e preços de amêndoas no Maranhão e para as exportações do óleo de babaçu não foram significativas, sugerindo que esse mercado apresenta uma certa estabilidade. No primeiro modelo da oferta com os dados disponíveis para o período de 1991-2012, os determinantes que se mostraram significativos e que mais contribuíram para explicar variações na quantidade ofertada de amêndoas de babaçu foram: o efetivo estadual de rebanhos bovinos; a variável dependente tomada com retardamento de um ano; a área plantada com lavouras temporárias; a tendência linear e o preço médio da amêndoa de babaçu. No segundo modelo com os dados disponíveis para o período de 1996-2012, os determinantes que se mostraram significativos e que mais contribuíram para explicar variações na quantidade ofertada de amêndoas de babaçu foram: o efetivo estadual de rebanhos bovinos; o preço médio da amêndoa de babaçu; a variável dependente tomada com retardamento de um ano; o custo da matéria-prima industrial para a indústria química no Maranhão e a tendência linear. Os determinantes que se mostraram significativos e que mais contribuíram para explicar variações na quantidade demandada de amêndoas de babaçu para o período de 1990-2012 foram: a variável dependente tomada com retardamento de um ano; preço médio da amêndoa de babaçu e o preço médio das importações de óleo de palma ou dendê. A oferta e a demanda apresentaram a elasticidade-preço inelástica tanto no curto quanto no longo prazo. A inelasticidade da oferta sugere a dificuldade do sistema extrativista em atender o aumento da demanda no prazo requerido pelos consumidores. A inelasticidade da demanda sob a ótica do consumidor ou da indústria oleoquímica indica que um aumento do preço da amêndoa causa o aumento da despesa total. Na ótica do produtor um aumento do preço ocasionaria apenas uma pequena redução da quantidade de mandada, assim, a receita total recebida apresentará elevação. Porém, como produtoras, as quebradeiras de coco reclamam sobre o baixo preço pago pelas amêndoas, portanto, não refletindo a teoria. Tal conjuntura insinua confirmar a problemática questão que envolve os outros agentes no elo produtivo da cadeia, os atravessadores para compra e transporte, com os quais é retida a grande parte da receita da comercialização das amêndoas.

Chile is hot travel spot

A brief travel article about Chile

Parameters Affecting the Extraction of Polycyclic Aromatic Hydrocarbons with Pressurised Hot Water

Pressurised hot water extraction (PHWE) exploits the unique temperature-dependent solvent properties of water minimising the use of harmful organic solvents. Water is environmentally friendly, cheap and easily available extraction medium. The effects of temperature, pressure and extraction time in PHWE have often been studied, but here the emphasis was on other parameters important for the extraction, most notably the dimensions of the extraction vessel and the stability and solubility of the analytes to be extracted. Non-linear data analysis and self-organising maps were employed in the data analysis to obtain correlations between the parameters studied, recoveries and relative errors. First, pressurised hot water extraction (PHWE) was combined on-line with liquid chromatography-gas chromatography (LC-GC), and the system was applied to the extraction and analysis of polycyclic aromatic hydrocarbons (PAHs) in sediment. The method is of superior sensitivity compared with the traditional methods, and only a small 10 mg sample was required for analysis. The commercial extraction vessels were replaced by laboratory-made stainless steel vessels because of some problems that arose. The performance of the laboratory-made vessels was comparable to that of the commercial ones. In an investigation of the effect of thermal desorption in PHWE, it was found that at lower temperatures (200ºC and 250ºC) the effect of thermal desorption is smaller than the effect of the solvating property of hot water. At 300ºC, however, thermal desorption is the main mechanism. The effect of the geometry of the extraction vessel on recoveries was studied with five specially constructed extraction vessels. In addition to the extraction vessel geometry, the sediment packing style and the direction of water flow through the vessel were investigated. The geometry of the vessel was found to have only minor effect on the recoveries, and the same was true of the sediment packing style and the direction of water flow through the vessel. These are good results because these parameters do not have to be carefully optimised before the start of extractions. Liquid-liquid extraction (LLE) and solid-phase extraction (SPE) were compared as trapping techniques for PHWE. LLE was more robust than SPE and it provided better recoveries and repeatabilities than did SPE. Problems related to blocking of the Tenax trap and unrepeatable trapping of the analytes were encountered in SPE. Thus, although LLE is more labour intensive, it can be recommended over SPE. The stabilities of the PAHs in aqueous solutions were measured using a batch-type reaction vessel. Degradation was observed at 300ºC even with the shortest heating time. Ketones and quinones and other oxidation products were observed. Although the conditions of the stability studies differed considerably from the extraction conditions in PHWE, the results indicate that the risk of analyte degradation must be taken into account in PHWE. The aqueous solubilities of acenaphthene, anthracene and pyrene were measured, first below and then above the melting point of the analytes. Measurements below the melting point were made to check that the equipment was working, and the results were compared with those obtained earlier. Good agreement was found between the measured and literature values. A new saturation cell was constructed for the solubility measurements above the melting point of the analytes because the flow-through saturation cell could not be used above the melting point. An exponential relationship was found between the solubilities measured for pyrene and anthracene and temperature.

Enhanced processing of SPOT multispectral satellite imagery for environmental monitoring and modelling

The Taita Hills in southeastern Kenya form the northernmost part of Africa’s Eastern Arc Mountains, which have been identified by Conservation International as one of the top ten biodiversity hotspots on Earth. As with many areas of the developing world, over recent decades the Taita Hills have experienced significant population growth leading to associated major changes in land use and land cover (LULC), as well as escalating land degradation, particularly soil erosion. Multi-temporal medium resolution multispectral optical satellite data, such as imagery from the SPOT HRV, HRVIR, and HRG sensors, provides a valuable source of information for environmental monitoring and modelling at a landscape level at local and regional scales. However, utilization of multi-temporal SPOT data in quantitative remote sensing studies requires the removal of atmospheric effects and the derivation of surface reflectance factor. Furthermore, for areas of rugged terrain, such as the Taita Hills, topographic correction is necessary to derive comparable reflectance throughout a SPOT scene. Reliable monitoring of LULC change over time and modelling of land degradation and human population distribution and abundance are of crucial importance to sustainable development, natural resource management, biodiversity conservation, and understanding and mitigating climate change and its impacts. The main purpose of this thesis was to develop and validate enhanced processing of SPOT satellite imagery for use in environmental monitoring and modelling at a landscape level, in regions of the developing world with limited ancillary data availability. The Taita Hills formed the application study site, whilst the Helsinki metropolitan region was used as a control site for validation and assessment of the applied atmospheric correction techniques, where multiangular reflectance field measurements were taken and where horizontal visibility meteorological data concurrent with image acquisition were available. The proposed historical empirical line method (HELM) for absolute atmospheric correction was found to be the only applied technique that could derive surface reflectance factor within an RMSE of < 0.02 ps in the SPOT visible and near-infrared bands; an accuracy level identified as a benchmark for successful atmospheric correction. A multi-scale segmentation/object relationship modelling (MSS/ORM) approach was applied to map LULC in the Taita Hills from the multi-temporal SPOT imagery. This object-based procedure was shown to derive significant improvements over a uni-scale maximum-likelihood technique. The derived LULC data was used in combination with low cost GIS geospatial layers describing elevation, rainfall and soil type, to model degradation in the Taita Hills in the form of potential soil loss, utilizing the simple universal soil loss equation (USLE). Furthermore, human population distribution and abundance were modelled with satisfactory results using only SPOT and GIS derived data and non-Gaussian predictive modelling techniques. The SPOT derived LULC data was found to be unnecessary as a predictor because the first and second order image texture measurements had greater power to explain variation in dwelling unit occurrence and abundance. The ability of the procedures to be implemented locally in the developing world using low-cost or freely available data and software was considered. The techniques discussed in this thesis are considered equally applicable to other medium- and high-resolution optical satellite imagery, as well the utilized SPOT data.

Fabrication and optical optimization of spot-size converters with strong cladding layers

A silicon-on-insulator (SOI) optical fiber-to-waveguide spot-size converter (SSC) overlaid with specially treated silica is investigated for integrated optical circuits. Unlike the conventional process of simply depositing the hot silica on silicon waveguides, two successive layers of silicon dioxide were grown on etched SSC structures by PECVD (plasma-enhanced chemical vapor deposition). The two layers have 0.8% index contrast and supply stronger cladding for an incident light beam. Additionally, this process is able to reduce the effective refractive index of the input mode to less than 1.47 (extremely close to that of the fiber), substantially weakening the unwanted back reflection. Exploiting this technology, it was demonstrated that the SSC showed a theoretical low mode mismatch loss of 1.23 dB for a TE-like mode and has an experimental coupling efficiency of 66%.

Air pollution levels measured at traffic hot spots : Brisbane urban corridor study

Air pollution levels were monitored continuously over a period of 4 weeks at four sampling sites along a busy urban corridor in Brisbane. The selected sites were representative of industrial and residential types of urban environment affected by vehicular traffic emissions. The concentration levels of submicrometer particle number, PM2.5, PM10, CO, and NOx were measured 5-10 meters from the road. Meteorological parameters and traffic flow rates were also monitored. The data were analysed in terms of the relationship between monitored pollutants and existing ambient air quality standards. The results indicate that the concentration levels of all pollutants exceeded the ambient air background levels, in certain cases by up to an order of magnitude. While the 24-hr average concentration levels did not exceed the standard, estimates for the annual averages were close to, or even higher than the annual standard levels.

Thermal analysis and hot stage Raman spectroscopy of the basic copper arsenate mineral : euchroite

The thermal analysis of euchroite shows two mass loss steps in the temperature range 100 to 105°C and 185 to 205°C. These mass loss steps are attributed to dehydration and dehydroxylation of the mineral. Hot stage Raman spectroscopy (HSRS) has been used to study the thermal stability of the mineral euchroite, a mineral involved in a complex set of equilibria between the copper hydroxy arsenates: euchroite Cu2(AsO4)(OH).3H2O → olivenite Cu2(AsO4)(OH) → strashimirite Cu8(AsO4)4(OH)4.5H2O → arhbarite Cu2Mg(AsO4)(OH)3. Hot stage Raman spectroscopy inolves the collection of Raman spectra as a function of the temperature. HSRS shows that the mineral euchroite decomposes between 125 and 175 °C with the loss of water. At 125 °C, Raman bands are observed at 858 cm-1 assigned to the ν1 AsO43- symmetric stretching vibration and 801, 822 and 871 cm-1 assigned to the ν3 AsO43- (A1) antisymmetric stretching vibration. A distinct band shift is observed upon heating to 275 °C. At 275 °C the four Raman bands are resolved at 762, 810, 837 and 862 cm-1. Further heating results in the diminution of the intensity in the Raman spectra and this is attributed to sublimation of the arsenate mineral. Hot stage Raman spectroscopy is most useful technique for studying the thermal stability of minerals especially when only very small amounts of mineral are available.