Development of InAlN HEMTs for space application

This thesis investigates the emerging InAlN high electron mobility transistor (HEMT) technology with respect to its application in the space industry. The manufacturing processes and device performance of InAlN HEMTs were compared to AlGaN HEMTs, also produced as part of this work. RF gain up to 4 GHz was demonstrated in both InAlN and AlGaN HEMTs with gate lengths of 1 μm, with InAlN HEMTs generally showing higher channel currents (~150 c.f. 60 mA/mm) but also degraded leakage properties (~ 1 x 10-4 c.f. < 1 x 10-8 A/mm) with respect to AlGaN. An analysis of device reliability was undertaken using thermal stability, radiation hardness and off-state breakdown measurements. Both InAlN and AlGaN HEMTs showed excellent stability under space-like conditions, with electrical operation maintained after exposure to 9.2 Mrad of gamma radiation at a dose rate of 6.6 krad/hour over two months and after storage at 250°C for four weeks. Furthermore a link was established between the optimisation of device performance (RF gain, power handling capabilities and leakage properties) and reliability (radiation hardness, thermal stability and breakdown properties), particularly with respect to surface passivation. Following analysis of performance and reliability data, the InAlN HEMT device fabrication process was optimised by adjusting the metal Ohmic contact formation process (specifically metal stack thicknesses and anneal conditions) and surface passivation techniques (plasma power during dielectric layer deposition), based on an existing AlGaN HEMT process. This resulted in both a reduction of the contact resistivity to around 1 x 10-4 Ω.cm2 and the suppression of degrading trap-related effects, bringing the measured gate-lag close to zero. These discoveries fostered a greater understanding of the physical mechanisms involved in device operation and manufacture, which is elaborated upon in the final chapter.

Process Selection Using Variation and Cost Relations

Variations are inherent in all manufacturing processes and can significantly affect the quality of a final assembly, particularly in multistage assembly systems. Existing research in variation management has primarily focused on incorporating GD&T factors into variation propagation models in order to predict product quality and allocate tolerances. However, process induced variation, which has a key influence on process planning, has not been fully studied. Furthermore, the link between variation and cost has not been well established, in particular the effect that assembly process selection has on the final quality and cost of a product. To overcome these barriers, this paper proposes a novel method utilizing process capabilities to establish the relationship between variation and cost. The methodology is discussed using a real industrial case study. The benefits include determining the optimum configuration of an assembly system and facilitating rapid introduction of novel assembly techniques to achieve a competitive edge.

Banana and abaca fiber-reinforced plastic composites obtained by rotational molding process

Natural fibers can be used in rotational molding process to obtain parts with improved mechanical properties. Different approaches have been followed in order to produce formulations containing banana or abaca fiber at 5% weight, in two- and three-layer constructions. Chemically treated abaca fiber has also been studied, causing some problems in processability. Fibers used have been characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), optical microscopy, and single-fiber mechanical tests. Rotomolded parts have been tested for tensile, flexural, and impact properties, demonstrating that important increases in elastic modulus are achieved with these fibers, although impact properties are reduced. © 2013 Copyright Taylor and Francis Group, LLC.

Propriedades óticas dos sistemas cerâmicos atuais e suas aplicações em dentes naturais

A estética representa uma qualidade cada vez mais requisitada pela sociedade na atualidade. A busca pela aparência ideal expandiu-se também na medicina dentária, aumentando as exigências por resultados perfeitos. A medicina dentária tem desenvolvido novas técnicas e novos materiais com a ambição de reproduzir as propriedades estéticas e funcionais dos dentes naturais. Os sistemas totalmente cerâmicos têm sido alvo de grande entusiasmo dado as suas características inerentes. O seu potencial na reabilitação oral estética tem derrotado as suas antecessoras metalocerâmicas. À semelhança do esmalte e da dentina, os sistemas totalmente cerâmicos exibem boas propriedades óticas de translucidez, opacidade, fluorescência e opalescência, resultado da interação com a luz. Ainda que não seja possível dissociar as propriedades óticas das propriedades mecânicas de um dente natural para o sucesso de uma restauração, a heterogeneidade das cerâmicas têm sido exitosas enquanto sistema que combina diferentes propriedades para diferentes indicações clínicas. Esta variabilidade deve-se a diferentes composições químicas e a diferentes processos de fabricação, entre outros, que acentuam ou atenuam qualidades em cada sistema totalmente cerâmico. Este trabalho pretende abordar e comparar os sistemas cerâmicos atuais (cerâmicas com base em sílica, cerâmicas com base de alumina, cerâmicas com base em zircónia) de acordo com as suas propriedades óticas e a consequente aplicação clínica tendo em conta as características dos dentes naturais.

Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools

The machining of hardened steel is becoming increasingly important in manufacturing processes. Machined parts made with hardened steel are often subjected to high service demands, which require great resistance and quality. The machining of this material submits the tools to high mechanical and thermal loads, which increases the tool wear and affects the surface integrity of the part. In that context, this work presents a study of drilling of AISI P20 steel with carbide tools, analyzing the effects on the process caused by the reduction of cutting fluid supply and its relation with the tool wear and the surface integrity of the piece. The major problem observed in the tests was a difficulty for chips to flow through the drill flute, compromising their expulsion from the hole. After a careful analysis, a different machining strategy was adopted to solve the problem

Estudo do defeito de ligação da asa em louça de porcelana

Este relatório descreve o trabalho realizado durante um estágio na empresa Vista Alegre Atlantis. Neste estágio, propunha-se diminuir ou eliminar um problema, um defeito observado como a asa descolada numa chávena de porcelana. Através do estudo das fases do processo de fabrico das chávenas, que se focou na conformação das asas e na secagem, concluiu-se que se tratava de um problema na conformação, relacionado com as propriedades da pasta utilizada para a conformação, recorrendo-se a uma pasta de porcelana com propriedades diferentes. Neste trabalho é apresentado o problema em estudo, o material (a porcelana), incluindo as suas propriedades, as matérias-primas e os processos utilizados para produzir as peças estudadas. Apresentam-se os procedimentos usados para estudar o material e o problema, os resultados obtidos e as conclusões tiradas da discussão dos dados e observações. Adicionalmente, é apresentado trabalho relevante efetuado durante o estágio, em especial aquele relacionado com as chávenas de porcelana.

Projeto de uma ferramenta específica para cravação de terminais elétricos

A necessidade contínua de incrementar a produtividade em todos os sectores leva a que sejam utilizados equipamentos cada vez mais sofisticados, permitindo novas técnicas de abordagem dos processos de fabrico, velocidades mais elevadas e maior precisão no produto final. No entanto, quase todos os equipamentos necessitam de ferramentas adequadas, que tirem partido efetivamente das potencialidades dos equipamentos disponíveis. A Engenharia tem aqui um papel extremamente importante, já que terá de conceber as ferramentas atendendo à satisfação de um elevado número de requisitos, que passam genericamente por tirar o máximo partido dos fatores tecnológicos proporcionados pelos equipamentos, cumprir com a cadência de produção necessária, assegurar a qualidade estipulada, garantir a segurança dos colaboradores que com ela trabalham e permitir uma fácil montagem e afinação, reduzindo assim os tempos de preparação e as possibilidades de fabrico de peças fora das especificações. Este trabalho foi desenvolvido em torno de uma necessidade real, tendo sido estipulados os requisitos necessários pelo cliente e tendo sido elaborado todo o projeto da ferramenta em torno desses mesmos requisitos. Foi efetuada uma otimização da ferramenta ainda na fase de anteprojeto, permitindo minimizar o seu custo e maximizar o seu rendimento e aptidão para o fim em vista. Os materiais foram cuidadosamente selecionados, tendo em vista a utilização de cada componente e a relação custo‐benefício. Foi ainda efetuada uma orçamentação da mesma, assim como um plano de instruções para a operação e manutenção da ferramenta. Deste modo, este trabalho é o resumo de grande parte do conhecimento adquirido, quer ao longo da vida académica, quer ao longo da experiência profissional.

Projecto e Implementação de Sistema de Alimentação Automática para Forno de Apoio à Injecção de Zamak

A injecção de Zamak em Portugal é uma actividade corrente, sendo usada na produção de inúmeras peças de pequena dimensão, nomeadamente em acessórios de vestuário, no fabrico de cablagens metálicas para a indústria automóvel, no fabrico de placas indicativas de marcas nos mais diversos produtos, entre muitas outras aplicações. Quando a quantidade de Zamak injectada em cada ciclo é relativamente baixa, o tempo que demora a consumir um lingote é bastante longo, pelo que não se justifica que o forno esteja equipado com um sistema de alimentação automática de lingotes. No entanto, quando as peças injectadas possuem uma maior massa ou o número de cavidades por molde é maior, um lingote pode ser consumido num período de tempo suficientemente curto para ser necessário um operário permanentemente atento à alimentação do forno. Neste caso, justifica-se a inclusão de um sistema automático que vá descarregando lingotes à medida que aquele que está a abastecer o forno é consumido. O presente trabalho foi elaborado com base na necessidade de uma empresa fabricante de máquinas para a injecção de Zamak, a qual pretendia dotar alguns dos seus modelos com este sistema, indo de encontro às necessidades dos seus clientes e ampliando a gama de acessórios que passa a poder disponibilizar em torno de cada equipamento.

A Risk Analysis Method to Support Virtual Organization Partners’ Selection

Part 17: Risk Analysis

Conceptual Reference Model for Virtual Factory: Potentials for Collaborative Business

Part 11: Reference and Conceptual Models

A discrete-time queueing system with feedback and optional service

Queueing systems constitute a central tool in modeling and performance analysis. These types of systems are in our everyday life activities, and the theory of queueing systems was developed to provide models for forecasting behaviors of systems subject to random demand. The practical and useful applications of the discrete-time queues make the researchers to con- tinue making an e ort in analyzing this type of models. Thus the present contribution relates to a discrete-time Geo/G/1 queue in which some messages may need a second service time in addition to the rst essential service. In day-to-day life, there are numerous examples of queueing situations in general, for example, in manufacturing processes, telecommunication, home automation, etc, but in this paper a particular application is the use of video surveil- lance with intrusion recognition where all the arriving messages require the main service and only some may require the subsidiary service provided by the server with di erent types of strategies. We carry out a thorough study of the model, deriving analytical results for the stationary distribution. The generating functions of the number of messages in the queue and in the system are obtained. The generating functions of the busy period as well as the sojourn times of a message in the server, the queue and the system are also provided.

A Model for Continuous Measurement of Drilled Shaft Diameter During Construction

Non-Destructive Testing (NDT) of deep foundations has become an integral part of the industry’s standard manufacturing processes. It is not unusual for the evaluation of the integrity of the concrete to include the measurement of ultrasonic wave speeds. Numerous methods have been proposed that use the propagation speed of ultrasonic waves to check the integrity of concrete for drilled shaft foundations. All such methods evaluate the integrity of the concrete inside the cage and between the access tubes. The integrity of the concrete outside the cage remains to be considered to determine the location of the border between the concrete and the soil in order to obtain the diameter of the drilled shaft. It is also economic to devise a methodology to obtain the diameter of the drilled shaft using the Cross-Hole Sonic Logging system (CSL). Performing such a methodology using the CSL and following the CSL tests is performed and used to check the integrity of the inside concrete, thus allowing the determination of the drilled shaft diameter without having to set up another NDT device. This proposed new method is based on the installation of galvanized tubes outside the shaft across from each inside tube, and performing the CSL test between the inside and outside tubes. From the performed experimental work a model is developed to evaluate the relationship between the thickness of concrete and the ultrasonic wave properties using signal processing. The experimental results show that there is a direct correlation between concrete thicknesses outside the cage and maximum amplitude of the received signal obtained from frequency domain data. This study demonstrates how this new method to measuring the diameter of drilled shafts during construction using a NDT method overcomes the limitations of currently-used methods. In the other part of study, a new method is proposed to visualize and quantify the extent and location of the defects. It is based on a color change in the frequency amplitude of the signal recorded by the receiver probe in the location of defects and it is called Frequency Tomography Analysis (FTA). Time-domain data is transferred to frequency-domain data of the signals propagated between tubes using Fast Fourier Transform (FFT). Then, distribution of the FTA will be evaluated. This method is employed after CSL has determined the high probability of an anomaly in a given area and is applied to improve location accuracy and to further characterize the feature. The technique has a very good resolution and clarifies the exact depth location of any void or defect through the length of the drilled shaft for the voids inside the cage. The last part of study also evaluates the effect of voids inside and outside the reinforcement cage and corrosion in the longitudinal bars on the strength and axial load capacity of drilled shafts. The objective is to quantify the extent of loss in axial strength and stiffness of drilled shafts due to presence of different types of symmetric voids and corrosion throughout their lengths.

Meshfree Method for Prediction of Thermal Properties of Porous Ceramic Materials

In the presented thesis work, meshfree method with distance fields is applied to create a novel computational approach which enables inclusion of the realistic geometric models of the microstructure and liberates Finite Element Analysis(FEA) from thedependance on and limitations of meshing of fine microstructural feature such as splats and porosity.Manufacturing processes of ceramics produce materials with complex porosity microstructure.Geometry of pores, their size and location substantially affect macro scale physical properties of the material. Complex structure and geometry of the pores severely limit application of modern Finite Element Analysis methods because they require construction of spatial grids (meshes) that conform to the geometric shape of the structure. As a result, there are virtually no effective tools available for predicting overall mechanical and thermal properties of porous materials based on their microstructure. This thesis is a separate handling and controls of geometric and physical computational models that are seamlessly combined at solution run time. Using the proposedapproach we will determine the effective thermal conductivity tensor of real porous ceramic materials featuring both isotropic and anisotropic thermal properties. This work involved development and implementation of numerical algorithms, data structure, and software.

QUANTIFICATION OF CALCIUM IN SPARKLING WINES BY INFRARED SPECTROSCOPY

Markets are increasingly competitive and the companies feel the urge to improve their manufacturing processes. Blending that with a larger control of quality and safety it was created a need to develop new methods of analysis each time more accurate, faster and with lower costs. Alentejo is a region with a wide variety of soils, most of them are rich in calcium and potassium. In the production of sparkling wine many wineries use encapsulated yeast in alginate beads, instead of the traditional method, champenoise. The first method is faster, allowing a more versatile production, reducing the risk of contamination and features organoleptic characteristics similar to the traditional method (yeast free). However, encapsulated yeast spheres should be only used if the base wine matches a number of features, among them calcium content. In this study the calcium content in the wine was determined by atomic absorption spectroscopy (AAS) and by near-infrared spectroscopy. The AAS is a high sensitivity method clearly produces a reliable result, however it is very time consuming and produces great quantities of environmental waste, therefore the possibility of using near-infrared spectroscopy as a method was studied to be a fast, simple and clean alternative to the AAS. It was obtained a calibration model with a variation coefficient higher than 0.80 which indicates that the near-infrared spectroscopy as an adequately alternative the ASS.

Advanced voxel-based CAD modelling for FSI simulations for automotive structures design

Additive Manufacturing (AM) is nowadays considered an important alternative to traditional manufacturing processes. AM technology shows several advantages in literature as design flexibility, and its use increases in automotive, aerospace and biomedical applications. As a systematic literature review suggests, AM is sometimes coupled with voxelization, mainly for representation and simulation purposes. Voxelization can be defined as a volumetric representation technique based on the model’s discretization with hexahedral elements, as occurs with pixels in the 2D image. Voxels are used to simplify geometric representation, store intricated details of the interior and speed-up geometric and algebraic manipulation. Compared to boundary representation used in common CAD software, voxel’s inherent advantages are magnified in specific applications such as lattice or topologically structures for visualization or simulation purposes. Those structures can only be manufactured with AM employment due to their complex topology. After an accurate review of the existent literature, this project aims to exploit the potential of the voxelization algorithm to develop optimized Design for Additive Manufacturing (DfAM) tools. The final aim is to manipulate and support mechanical simulations of lightweight and optimized structures that should be ready to be manufactured with AM with particular attention to automotive applications. A voxel-based methodology is developed for efficient structural simulation of lattice structures. Moreover, thanks to an optimized smoothing algorithm specific for voxel-based geometries, a topological optimized and voxelized structure can be transformed into a surface triangulated mesh file ready for the AM process. Moreover, a modified panel code is developed for simple CFD simulations using the voxels as a discretization unit to understand the fluid-dynamics performances of industrial components for preliminary aerodynamic performance evaluation. The developed design tools and methodologies perfectly fit the automotive industry’s needs to accelerate and increase the efficiency of the design workflow from the conceptual idea to the final product.