846 resultados para GIS (geographic information system)
Resumo:
This study presents the Environmental Sensibility Mapping to oil spillings on the Potengi estuary - RN and neighboring coastline through remote sensing data, collecting, treatment and integration of the geomorphologic, oceanographic (temperature, salinity, density, direction and intensity), meteorological (wind speed and direction) and high resolution seismic (bathymetry and sonography) data. The Potengi river estuary is located on the eastern coastline of the Rio Grande do Norte State, being inserted in the geological context for the coastal Pernambuco-Paraíba basin and spreading over 18 km; it shelters the Natal harbor zone and an oil terminal, centralizing, therefore, important oil transport operations that can cause accidental spillings. Under the oceanographic point of view, the Potengi estuary is characterized by the absence of any expressive thermic stratification, being classified as partially mixed, B type according to Pritchard (1955), and 2 type in conformity to the stratification-circulation diagram by Hansen & Rattray (1966). Two main wind systems are responsable for the formation of wave sets that occur in the area. The dynamic tide presents, in the Natal Harbor, mean amplitude in spring and quadrature tides, with around 2.8 and 2m, respectively. The mechanism of saline tide mixing was defined through the salinity which is the main parameter for the identification of this mechanism. Important variations of the salinity mean values (36.32 psu), temperature (28.11ºC) and density (22.96 kg/m3) in the estuarine waters presented features belonging to low latitude regions. The water temperature follows the air temperature variations, in the region, with expressive daily amplitudes. In this study, the identification of the estuarine bed morphology through bathymetric and sonographic analysis, had the purpose to evaluate the influence of the superficial and bottom currents for the bottom shaping. In this way, the use of the side scan sonar showed, to be very useful in the identification of the bottom morphology and its relationship with the predominant action of the tidal currents in the Potengi estuary. Besides, it showed how the sonograms can be a support to the comparison of the several patterns derived from the local hydrodynamic variations. The holocene sediments, which fill the estuarine channel, are predominantly sandy, varying from selected, sometimes silty. The sedimentation is controlled by the environmental hydrodynamic conditions, being recognized two important textural facies: Muddy Facies and Sandy Facies. The distribution of these textural facies apparently oscillates owing to the tidal cycle and flow intensity. Each one of the above mentioned data was integrated in a Geographic Information System (GIS), from which was produced the Environmental Sensibility Map to oil spillings with Coastal Sensibility Index (CSI) to the Potengi estuary. The integrated analysis of these data is essential to oil spilling contingency plans, in order to reduce the spilling environmental consequences and to make efficient the endeavours of contention and cleaning up/removal on the Natal Harbor. This study has the aim to collaborate for the increase of informations about the estuarine environment and contribute to a better management of the question: environment/polluting loads
Resumo:
The area between Galinhos and São Bento do Norte beaches, located in the northern coast of the Rio Grande do Norte State is submitted to intense and constant processes of littoral and aeolian transport, causing erosion, alterations in the sediments balance and modifications in the shoreline. Beyond these natural factors, the human interference is huge in the surroundings due to the Guamaré Petroliferous Pole nearby, the greater terrestrial oil producing in Brazil. Before all these characteristics had been organized MAMBMARE and MARPETRO projects with the main objective to execute the geo-environmental monitoring of coastal areas on the northern portion of RN. There is a bulky amount of database from the study area such as geologic and geophysical multitemporal data, hydrodynamic measurements, remote sensing multitemporal images, thematic maps, among others; it is of extreme importance to elaborate a Geographic Database (GD), one of the main components of a Geographic Information System (GIS), to store this amount of information, allowing the access to researchers and users. The first part of this work consisted to elaborate a GD to store the data of the area between Galinhos and São Bento do Norte cities. The main goal was to use the potentiality of the GIS as a tool to support decisions in the environmental monitoring of this region, a valuable target for oil exploration, salt companies and shrimp farms. The collected data was stored as a virtual library to assist men decisions from the results presented as digital thematic maps, tables and reports, useful as source of data in the preventive planning and as guidelines to the future research themes both on regional and local context. The second stage of this work consisted on elaborate the Oil-Spill Environmental Sensitivity Maps. These maps based on the Environmental Sensitivity Index Maps to Oil Spill developed by the Ministry of Environment are cartographic products that supply full information to the decision making, contingency planning and assessment in case of an oil spilling incident in any area. They represent the sensitivity of the areas related to oil spilling, through basic data such as geology, geomorphology, oceanographic, social-economic and biology. Some parameters, as hydrodynamic data, sampling data, coastal type, declivity of the beach face, types of resources in risk (biologic, economic, human or cultural) and the land use of the area are some of the essential information used on the environmental sensitivity maps elaboration. Thus using the available data were possible to develop sensitivity maps of the study area on different dates (June/2000 and December/2000) and to perceive that there was a difference on the sensitivity index generated. The area on December presented more sensible to the oil than the June one because hydrodynamic data (wave and tide energy) allowed a faster natural cleaning on June. The use of the GIS on sensitivity maps showed to be a powerful tool, since it was possible to manipulate geographic data with correctness and to elaborate more accurate maps with a higher level of detail to the study area. This presented an medium index (3 to 4) to the long shore and a high index (10) to the mangrove areas highly vulnerable to oil spill
Resumo:
The Amapá State has an important natural lake system, known as The Amapá Lakes Region . Most of these lakes are on the southern part of Amapá s coastal plain, which has 300 km of extension and it s composed by holocenic sediments deposited at the northern part of Amazon River to the Orange Cape located on the northern part of Amapá state. This region is under influence of the Amazon River discharge which is the largest liquid discharge of about 209.000 m³/s and biggest sediment budget discharged on the ocean in the order 6.108 ton per day. The climate is influenced by the Intertropical Convergence Zone and El Niño Southern Oscillation which act mainly under precipitation, nebulosity, local rivers and tidal hidrology. In this region lake belts are Ocidental, Oriental and Meridional Lake Belts. The last one is formed by the by the lakes Comprido de Cima, Botos, Bacia, Lodão, Ventos, Mutuco and Comprido de Baixo. These lakes are the closest to the Araguari River and are characterized by pelitic sedimentation associated with fluvial and estuarine flood plains under influence of tides. The lakes are interconnected, suffer influence of flood pulses from the Tartarugal, Tartarugalzinho and Araguari rivers and the hydrodynamic and morphodynamic know edge is poor. Volume and area reduction, natural eutrophication, anthophic influence, hidrodynamic alterations, morphological changes and are factors which can contribute to the closing of such lakes on the Meridional Lake Belt. This belt is inside the boundaries of the Biological Reserve of Piratuba Lake, created in 1980 for integral protection. Due to the fragility of the environment together with the poor knowledge of the system and with the study area relevancy it is necessary to know the hydrodynamic and geoenvironmental processes. This work aims the characterization of morphodynamic and hydrodynamic processes in order to understand the geoambiental context of the Meridional Lake Belt, from the Comprido de Baixo Lake to the dos Ventos Lake, including the Tabaco Igarape. Methodology was based on the hydrodynamic data acquisition: liquid discharge (acoustic method), tides, bathymetry and the interpretation of multitemporal remote sensing images, integrated in a Geographic Information System (GIS). By this method charts of the medium liquid discharges of Lake Mutuco and Tabacco Igarape the maximum velocity of flow were estimated in: 1.1 m/s, 1.6 m/s and 1.6 m/s (rainy season) and 0.6 m/s, 0.6 m/s and 0.7 m/s (dry period), the maximum flow in: 289 m³/s, 297 m³/s and 379 m³/s (rainy season) and 41 m³/s , 79 m³/s and 105 m³/s (dry period), respectively. From the interpretation of multitemporal satellite images, maps were developed together with the analysis of the lakes and Tobaco Igarape evolution from 1972 to 2008, and were classified according to the degree of balance in the area: stable areas, eutrophic areas, areas of gain, and eroded areas. Troughout analysis of the balance of areas, it was possible to quantify the volume of lake areas occupied by aquatic macrophytes. The study sought to understand the hydrodynamic and morphodynamic processes occurring in the region, contributing to the elucidation of the processes which cause and/or favor geoenvironmental changes in the region; all such information is fundamental to making the management of the area and further definition of parameters for environmental monitoring and contributing to the development of the management plan of the Biological Reserve of Lake Piratuba. The work activities is a part of the Project "Integration of Geological, geophysical and geochemical data to Paleogeographic rebuilding of Amazon Coast, from the Neogene to the Recent
Resumo:
This work presents a study on the environmental vulnerability of the coastal region of Pititinga, Rio do Fogo/RN. The coastal erosion of Pititinga beach was analyzed and considerated as one more process that produces environmental vulnerability in the area of study, taking into account its human and natural environment and establishing the relation between them, to understand the arrangement that produced its spatial configuration. The natural environment was expressed by thematics maps with geology, geomorphology, vegetation and soil themes, while the human environment was expressed by the use and occupation of the soil map. The coastal erosion was put in an erosion vulnerability map. The methodological procedure to generate the thematics maps, vulnerability maps and of the erosion coastal involved the bibliographic research, field visits with check-list form fill, collect and analysis of sediment sample, photo-interpretation techniques, integration of the information in a database, data store and spatial analysis in a Geographic Information System (GIS) ambient. The natural vulnerability map shows a predominancy of environments with low (29,6%) or medium (42,4%) vulnerability, pointed the frontal and mobile dune as the areas with the highest vulnerability. The environmental vulnerability map, presents a predominancy of environments with low vulnerability (53,8%), with the high vulnerability concentrated on Pititinga community. The coastal erosion vulnerability presented distinct behaviors on three sections among the coastal line according each one characteristics. Where there are frontal and transgressive dunes, vulnerability are, generally, medium or low, respectively, and in the absence of them, as what occurs in Pititinga community, the vulnerability is predominately very high
Resumo:
This study shows the results of a research developed in the coastal regions of the Maxaranguape and Touros municipalities, more specific in the mobile dune fields of the Rio Grande do Norte's eastern coast. Although the coastal zones, represent a small percentage of the earth's surface it concentrates a great part of the world's population. The Rio Grande do Norte's state coastal landscape mosaic composed by the dune fields suggest a dynamic scene of changes in the spatial and temporal arranges, with significant changes in the geometry of the sedimentary cover. Following this perspective this research has the objective to map the emerged coastal zone of the Rio Grande do Norte's eastern coast under the perspective of the time-space evolution of the mobile dune fields using geoprocessing techniques, which includes remote sensing, digital images processing and geographic information system (GIS). The results imply the issue of thematic maps: Geologic map; multitemporal evolution map of the mobile dune fields; quantification of the mobile dune fields differences map; temporal evolution of the mobile dune fields surrounds map. The El Niño episodes have directly affected the atmospheric circulation, what have enhanced the sedimentary input in the sand dune, what can justify the relative area growth between the years of 1993 and 2001. The dynamic of the landscape transition were higher than the stability of the spatial pattern of the dune and it's surrounds, as a result the Rio Grande do Norte eastern coast dune fields, specially the mobile dunes from Touros, Zumbi and Maracajau have shown a decrease on the sedimentary cover without vegetation area from 1970 to 2007. Therefore, the data acquired and the techniques used, can be, eventually applied to the mobile dune fields monitoring in order to preserve the dune ecosystems in the Rio Grande do Norte coast
Resumo:
Pode-se afirmar que a evolução tecnológica (desenvolvimento de novos instrumentos de medição como, softwares, satélites e computadores, bem como, o barateamento das mídias de armazenamento) permite às Organizações produzirem e adquirirem grande quantidade de dados em curto espaço de tempo. Devido ao volume de dados, Organizações de pesquisa se tornam potencialmente vulneráveis aos impactos da explosão de informações. Uma solução adotada por algumas Organizações é a utilização de ferramentas de sistemas de informação para auxiliar na documentação, recuperação e análise dos dados. No âmbito científico, essas ferramentas são desenvolvidas para armazenar diferentes padrões de metadados (dados sobre dados). Durante o processo de desenvolvimento destas ferramentas, destaca-se a adoção de padrões como a Linguagem Unificada de Modelagem (UML, do Inglês Unified Modeling Language), cujos diagramas auxiliam na modelagem de diferentes aspectos do software. O objetivo deste estudo é apresentar uma ferramenta de sistemas de informação para auxiliar na documentação dos dados das Organizações por meio de metadados e destacar o processo de modelagem de software, por meio da UML. Será abordado o Padrão de Metadados Digitais Geoespaciais, amplamente utilizado na catalogação de dados por Organizações científicas de todo mundo, e os diagramas dinâmicos e estáticos da UML como casos de uso, sequências e classes. O desenvolvimento das ferramentas de sistemas de informação pode ser uma forma de promover a organização e a divulgação de dados científicos. No entanto, o processo de modelagem requer especial atenção para o desenvolvimento de interfaces que estimularão o uso das ferramentas de sistemas de informação.
Resumo:
O objetivo desse trabalho foi verificar a viabilidade do uso de um Sistema de Informações Geográficas (SIG) e a imagem de satélite para a análise do uso atual da terra e localização de áreas onde possam estar ocorrendo conflitos entre capacidade e uso do solo, na microbacia hidrográfica do Arroio do Meio. Foram utilizadas técnicas de geoprocessamento, como álgebra entre mapas, consulta ao banco de dados e reclassificação de imagens. Uma microbacia foi escolhida como objeto deste estudo, por ser considerada por muitos autores como sendo uma das melhores unidades para o planejamento e desenvolvimento sócioeconômico dos habitantes do meio rural. Na microbacia estudada, foram encontrados 555ha cobertos com florestas, compreendendo 24% da área total. As lavouras com área de 1.314ha ocupam a maior parte da microbacia (56%). Os campos de pastagens cobrem 184ha, ou seja, 8% da área total. As áreas alagadas representam 11% da área da microbacia, tendo respectivamente 265ha. Foram detectados ainda, 31ha sombreados (1%) onde não se determinou com exatidão o uso da terra. Nas áreas com declividade superior a 47%, foram detectados 32ha sem cobertura de florestas, perfazendo 1,4% da área da microbacia. em declives superiores a 30%, existem 71ha (3%) sendo usados para a agricultura. A área ocupada com Chernossolos e Neossolos Litólicos, unidade de mapeamento Ciríaco-Charrua em declividade maior que 30% sem cobertura florestal é de 14ha (0,6%). de acordo com a declividade e o solo, as áreas de conflito alcançam 5% da área total, o que demonstra que, na maior parte da microbacia, a terra está sendo usada de acordo com sua capacidade.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The objective was the study of better areas for sugar cane exploitation, using variables related to the classes and exposition of slopes, edaphic and climatic variables. Data were analysed with the aid of a Geographic Information System supported by 8 bit microcomputer, and maps of North exposition, photosynthetically the most efficient, were produced for different gradients of slope. These maps combined with traditional maps can be a very helpful tool to planners. -from English summary
Resumo:
The acquisition and update of Geographic Information System (GIS) data are typically carried out using aerial or satellite imagery. Since new roads are usually linked to georeferenced pre-existing road network, the extraction of pre-existing road segments may provide good hypotheses for the updating process. This paper addresses the problem of extracting georeferenced roads from images and formulating hypotheses for the presence of new road segments. Our approach proceeds in three steps. First, salient points are identified and measured along roads from a map or GIS database by an operator or an automatic tool. These salient points are then projected onto the image-space and errors inherent in this process are calculated. In the second step, the georeferenced roads are extracted from the image using a dynamic programming (DP) algorithm. The projected salient points and corresponding error estimates are used as input for this extraction process. Finally, the road center axes extracted in the previous step are analyzed to identify potential new segments attached to the extracted, pre-existing one. This analysis is performed using a combination of edge-based and correlation-based algorithms. In this paper we present our approach and early implementation results.
Resumo:
Forest roads are frequently pointed as source of environmental problems related to erosion and they also influence harvest cost due to maintenance operations. Roads not well designed are sources of hydrological problems on catchments and the current attention to sustainability of forest exploration projects point out to the need of diagnostics tools for guiding the redesign of the road system. At this study, runoff hydrological indicators for forest road segments were assessed in order to identify critical points of erosion and water concentration on soils. A road network of a forest production area was divided into 252 road segments that were used as observations of four variables: mean terrain slope, main segment slope, LS factor and topographic index. The data analysis was based on descriptive statistics for outliers' identification, principal component analysis and for variability study between variables and between observations, and cluster analysis for similar segments groups' identification. The results allowed classifying roads segments into five mains road types: road on the ridge, on the valley, on the slopes, on the slopes but in a contour line and on the steepest slope. The indicators were able to highlight the most critical segments that differ of others and are potential sources of erosion and water accumulation problems on forest roads. The principal component analysis showed two main variability sources related to terrain topographic characteristics and also road design, showing that indicators represent well those elements. The methodology seems to be appropriated for identification of critical road segments that need to be redesigned and also for road network planning at new forest exploration projects.
Resumo:
The activities and management operations of wood harvesting do not have good computational tools available to help the forest technicians with the task of cost reduction. In many cases, machines of high investment are used in wood harvesting without adequate operation planning; consequently, the cost per hour of these machines, which is high, could be reduced. Using technological resources such as the Geographic Information Systems (GIS) integrated with the Global Positioning System (GPS), which are the basis of precision harvesting. In this research, a technological tool capable of calculating and optimizing the average skidding distance of the forwarder was developed. It was used in stands of different sizes and formats through mathematical techniques and available functionalities in the Geographic Information System GRASS. The developed tool, called optimized model, divides the stand in small parts in relation to shorter skidding distances. The main variable considered was the alignment of plantation. The model was tested in eucalypt stands located in the State of São Paulo. Sixteen stands were randomly selected: eight with a rectangular polygon form, and eight with irregular polygon form. The main variables were collected in these stands. Results showed that the optimized model developed, is efficient and flexible. It was possible to divide the stands in small parts resulting in smaller skidding medium distances. The stands with irregular form had shorter skidding medium distances than the rectangular stands.
Resumo:
The purpose of this study was to develop a methodology for evaluating neighborhood impacts using a Geographic Information System (GIS) and to apply the procedures to the companies of the High-Technology Industrial Cluster of São Carlos. To this end, an evaluation was made of the neighborhood impacts on the physical environment, urban components, quality of life, and urban infrastructure using impact matrices, and the impacts were assigned scores according to type, order, magnitude and duration. Fifty one companies were examined based on data provided by the companies themselves and on field surveys. The impacts are represented spatially in proportional symbols maps, based on the spatial distribution of the companies in the urban area of the city of São Carlos and the areas of influence of each company. The application of the proposed methodology served to validate it and indicated that the neighborhood impacts caused by the companies of this study are related to each company's type of activity, its size, and its occupation of the area. © 2008 Journal of Urban and Environmental Engineering (JUEE). All rights reserved.
Resumo:
Cancer is the second main cause of death in Brazil, and according to statistics disclosed by INCA - National Cancer Institute 466,730 new cases of the disease are forecast for 2008. The storage and analysis of tumour tissues of various types and patients' clinical data, genetic profiles, characteristics of diseases and epidemiological data may provide more precise diagnoses, providing more effective treatments with higher chances for the cure of cancer. In this paper we present a Web system with a client-server architecture, which manages a relational database containing all information relating to the tumour tissue and their location in freezers, patients, medical forms, physicians, users, and others. Furthermore, it is also discussed the software engineering used to developing the system.
Resumo:
This research aimed to study land use capability classes in Pratânia, São Paulo State, Brazil, by using the Geographic Information System (GIS), in order to find out the appropriate planning system for soil use. The watershed covers an area of 21,773.61 ha and is located among the coordinates 22°44'48S and 22°52'17S and 48°38'21W and 48°48'07W. The land use capability map was made from the slope and soil maps, based on the features of each kind of soil and the land use capability table for class assessment. It was possible to conclude that IIIs was the most significant subclass. Slope classes from 0% to 20% were present in more than 97% of Pratânia, being the plane areas the most representative ones (55%). GIS showed to be an excellent tool for determining land use capability, because the geoprocessing use facilitates and activates the digital data crossing, allowing its storage for future environmental planning.