Determinação da seqüência de cDNA da enzima hialuronidase do veneno de Polybia paulista (Hymenoptera : vespidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Impacto ambiental e agronômico do uso de condicionadores orgânicos no cultivo de Cymbopogon citratus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

On the Acoustic Filtering of the Pipe and Sensor in a Buried Plastic Water Pipe and its Effect on Leak Detection: An Experimental Investigation

Acoustic techniques have been used for many years to find and locate leaks in buried water distribution systems. Hydrophones and accelerometers are typically used as sensors. Although geophones could be used as well, they are not generally used for leak detection. A simple acoustic model of the pipe and the sensors has been proposed previously by some of the authors of this paper, and their model was used to explain some of the features observed in measurements. However, simultaneous measurements of a leak using all three sensor-types in controlled conditions for plastic pipes has not been reported to-date and hence they have not yet been compared directly. This paper fills that gap in knowledge. A set of measurements was made on a bespoke buried plastic water distribution pipe test rig to validate the previously reported analytical model. There is qualitative agreement between the experimental results and the model predictions in terms of the differing filtering properties of the pipe-sensor systems. A quality measure for the data is also presented, which is the ratio of the bandwidth over which the analysis is carried out divided by the centre frequency of this bandwidth. Based on this metric, the accelerometer was found to be the best sensor to use for the test rig described in this paper. However, for a system in which the distance between the sensors is large or the attenuation factor of the system is high, then it would be advantageous to use hydrophones, even though they are invasive sensors.

Relações Públicas: a importância das relações humanas

This monograph has as objective to study the human relations and the Public Relations in the contemporary time in witch the new technologies of the information got closer to the various existent cultures, but who make of the informative society of the global era, the expansion of the capital and of the culture of the more value. Man kind is backing away from the human relations, because the social interactions in the global world are done by objects such as the television, the internet and the telephone in witch cases the subjectivity and the human contact are traded for the informative quantity, because man kind doesn’t have anymore time to think, reflect and to exchange information. Man kind isolates itself and fills it’s subjective emptiness with the products offered by the neoliberal capitalism. The public relations in the organizations seek the human values created from a complex network of social interactions in all the heterogeneous of the organization. Through the communication the public relations tries to manage the relationships with the dialogical communication, between the public-organization, to harmonize the conflicting differences of the organizational environment. Thus, the public relations has to assume the roll of the information manager, and administrator of the human relations in this new global world, informative and that functions from the capital

Estudo de caso: aplicação do método DMAIC-White Belt- na redução de latas amassadas em uma produção de leite em pó

This work consists of the implementation of the steps Define, Measure , Analyze , Improve and Control ( DMAIC ) to develop a Six Sigma project in an industry the food industry. The objective was to demonstrate a potential for reducing the occurrence of crushed cans in potting milk powder industry in a White Belt project. The food industry accounts for about 9 % of Brazil's gross domestic product ( GDP ), generating thousands of jobs . Among the major sectors of the food industry is the manufacturing sector of milk , occupies approximately 10 % of the total turnover of the food industry . Brazil is considered today one of the eight largest producers of milk powder in the world. The milk powder is packed , mostly for aluminum cans that are lined internally with varnishes and other materials to protect the milk of metals from aluminum. When the cans are dented food protection is compromised and may lead ingestion causing dis-eases such as botulism. Aiming to solve the problem of dented cans methodology was used as a case study with a quantitative approach through the DMAIC method. Some quality tools used in each step of the project as brainstorming , cause and effect diagram , flowchart , ef-fort and impact matrix, 5W1H , among other Pareto diagram is presented . A survey about the disposal of cans in the company verifying a mean loss and, from this histor-ical , a goal loss was calculated was performed . With the target set we calculated the annual saving design . During application of DMAIC was found that the highest rate of loss occurred in transportation between the factory and the factory that fills cans milk . Several actions were taken to resolve problems that resulted in dented cans and the first two months of phase control it was found that the smaller losses calculated target resulting in a saving for the company. The short time of implementa-tion of the Improve phase did not allow a more detailed a ...

The stream fish fauna from three regions of the Upper Paraná River basin

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nível de conhecimento dos cirurgiões dentistas sobre a qualidade dos prontuários odontológicos para fins de identificação humana

Objective: The aim of this research was to determine the knowledge level of 400 dentists registered in the Regional Dental Council of Cuiabá, through a questionnaire about the importance of records in the process of human identification. Results: We observed that 48.36% of them dispense between 10 and 20 minutes. Only 13.1% of the surveyed dentists did not have the habit of writing down the oral conditions of their patients before starting treatment and 42.62% have only one odontogram filled. From the 122 participants, 11.11% reported that the documentation had no utility to establish the patients identity. To make the situation worse, 33.6% of them said they did not keep the records of patients updated. Conclusion: We conclude that the dentist of Cuiabá has enough knowledge on preparing, maintaining and importance of dental records before the death in the identification process for establishing the patient identity. But, always he did not properly fills the dental records, thus it has been reducing their clinical, administrative and legal value.

Os desenhos da cidade observada: uma reflexão singular

How are teachers Cartoons observation Architecture Schools in several decades, the idea was to try and explain firsthand the look and fundamental elements of drawings to the Architect. We start looking through the design of: 1 A projective gaze: the invisible is made visible by interactivity and space and time are perceived by the distance that look place between them; 2nd In bidirectional contamination: the object fills the subject, double-hand, bringing the tactile qualities of architecture in continuous resonance, 3rd Strangeness by slow look: draw as perceptual expansion strategy; 4 Articulation of the structural elements of the design while similar language to architecture and city through the selection of appropriate signs and codes, exclusive and singular.

An analysis of embeddedness in the value creation in interorganisational networks: an illustrative example in Brazil

The purpose of this article is to propose a methodological approach to analyse how the positioning of actors in an interorganisational network can influence the elements of value creation. This study fills a gap in the existing literature by exploring the relationship between the positioning of actors and the value creation in a context of interorganisational networks. The case study method was employed and the data was obtained from four companies of an interorganisational network, located in Brazil, which produces earthmoving equipments. The central actor in this network is benefited through access to resources, power and information of the other network actors. The centrality position seems to help this company in the absorption and diffusion of knowledge among the other network actors. The research indicates, that a dense core (through strong ties) and redundancy (for triangulation and knowledge absorption), benefited the following value creation elements: tangible; intangible; services and economic.

Direct estimation of the backward flow

[EN] The aim of this work is to propose a new method for estimating the backward flow directly from the optical flow. We assume that the optical flow has already been computed and we need to estimate the inverse mapping. This mapping is not bijective due to the presence of occlusions and disocclusions, therefore it is not possible to estimate the inverse function in the whole domain. Values in these regions has to be guessed from the available information. We propose an accurate algorithm to calculate the backward flow uniquely from the optical flow, using a simple relation. Occlusions are filled by selecting the maximum motion and disocclusions are filled with two different strategies: a min-fill strategy, which fills each disoccluded region with the minimum value around the region; and a restricted min-fill approach that selects the minimum value in a close neighborhood. In the experimental results, we show the accuracy of the method and compare the results using these two strategies.

Monte-Carlo simulation of hard spherocylinders under confinement

When a liquid crystal is confined to a cavity its director field becomes subject to competing forces: on the one hand, the surface of the cavity orients the director field (``surface anchoring''), on the other hand deformations of the director field cost elastic energy. Hence the equilibrium director field is determined by a compromise between surface anchoring and elasticity. One example of a confined liquid crystal that has attracted particular interest from physicists is the nematic droplet. In this thesis a system of hard rods is considered as the simplest model for nematic liquid crystals consisting of elongated molecules. First, systems of hard spherocylinders in a spherical geometry are investigated by means of canonical Monte Carlo simulations. In contrast to previous simulation work on this problem, a continuum model is used. In particular, the effects of ordering near hard curved walls are studied for the low-density regime. With increasing density, first a uniaxial surface film forms and then a biaxial surface film, which eventually fills the entire cavity. We study how the surface order, the adsorption and the shape of the director field depend on the curvature of the wall. We find that orientational ordering at a curved wall in a cavity is stronger than at a flat wall, while adsorption is weaker. For densities above the isotropic-nematic transition, we always find bipolar configurations. As a next step, an extension of the Asakura-Oosawa-Vrij model for colloid-polymer mixtures to anisotropic colloids is considered. By means of computer simulations we study how droplets of hard, rod-like particles optimize their shape and structure under the influence of the osmotic compression caused by the presence of spherical particles that act as depletion agents. At sufficiently high osmotic pressures the rods that make up the drops spontaneously align to turn them into uniaxial nematic liquid crystalline droplets. The nematic droplets or ``tactoids'' that so form are not spherical but elongated, resulting from the competition between the anisotropic surface tension and the elastic deformation of the director field. In agreement with recent theoretical predictions we find that sufficiently small tactoids have a uniform director field, whilst large ones are characterized by a bipolar director field. From the shape and director-field transformation of the droplets we estimate the surface anchoring strength.

Forma breve e fotografia: una narrativa del Mozambico

La relazione interdisciplinare tra letteratura e fotografia, nella rilettura della storia recente del Mozambico, è l’oggetto di studio della presente tesi. Il presupposto coincide in primo luogo con la disamina interna della dialettica esistente tra archivio coloniale e oralità, modalità narrativa in parte transitata nella estória, declinazione lusofona della forma breve che permette di recuperare l’eredità popolare del racconto tradizionale. Il dialogo tra verbale e visuale consente a sua volta di stabilire nuovi paradigmi interpretativi nel dibattito postcoloniale tra memoria, trauma e rappresentazione. L’analisi comparativa tra la narrativa di João Paulo Borges Coelho e la fotografia di Ricardo Rangel rivela sguardi diversi sul mondo circostante, ma anche convergenze contemplative che si completano nell’incorporazione reciproca delle “omologie strutturali” comuni alle due modalità espressive. La fotografia colma delle lacune fornendoci delle visioni del passato, ma, in quanto “rappresentazione”, ci mostra il mondo per come appare e non per come funziona. Il testo letterario, grazie al suo approccio dialogico-narrativo, consente la rielaborazione museologica della complessa pletora di interferenze semantiche e culturali racchiuse nelle immagini, in altre parole fornisce degli “indizi di verità” da cui (ri)partire per l’elaborazione di nuovi archetipi narrativi tra l’evento rappresentato e la Storia di cui fa parte. Il punto di tangenza tra i due linguaggi è la cornice, espediente fotografico e narrativo che permette di tracciare i confini tra l’indicibile e l’invisibile, ma anche tra ciò che si narra e ciò che sta fuori dalla narrazione, ovvero fuori dalla storia. La tensione dialettica che si instaura tra questi due universi è seminale per stabilire le ragioni della specificità letteraria mozambicana perché, come afferma Luandino Vieira, “nel contesto postcoloniale gli scrittori sono dei satelliti che ruotano intorno ai «buchi neri della storia» la cui forza di attrazione permette la riorganizzazione dell’intero universo letterario.

Observable stages and scheduling for alveolar remodeling following antemortem tooth loss

Zahnverlust zu Lebzeiten („antemortem tooth loss“, AMTL) kann als Folge von Zahnerkrankungen, Traumata, Zahnextraktionen oder extremer kontinuierlicher Eruption sowie als Begleiterscheinung fortgeschrittener Stadien von Skorbut oder Lepra auftreten. Nach dem Zahnverlust setzt die Wundheilung als Sekundärheilung ein, während der sich die Alveole mit Blut füllt und sich ein Koagulum bildet. Anschließend erfolgt dessen Umwandlung in Knochengewebe und schließlich verstreicht die Alveole derart, dass sie makroskopisch nicht mehr erkannt werden kann. Der Zeitrahmen der knöchernen Konsolidierung des Kieferkammes ist im Detail wenig erforscht. Aufgrund des gehäuften Auftretens von AMTL in menschlichen Populationen, ist die Erarbeitung eines Zeitfensters, mit dessen Hilfe durch makroskopische Beobachtung des Knochens die Zeitspanne seit dem Zahnverlust („time since tooth loss“, TSL) ermittelt werden kann, insbesondere im archäologischen Kontext äußerst wertvoll. Solch ein Zeitschema mit Angaben über die Variabilität der zeitlichen Abläufe bei den Heilungsvorgängen kann nicht nur in der Osteologie, sondern auch in der Forensik, der allgemeinen Zahnheilkunde und der Implantologie nutzbringend angewandt werden. rnrnNach dem Verlust eines Zahnes wird das Zahnfach in der Regel durch ein Koagulum aufgefüllt. Das sich bildende Gewebe wird rasch in noch unreifen Knochen umgewandelt, welcher den Kieferknochen und auch die angrenzenden Zähne stabilisiert. Nach seiner Ausreifung passt sich das Gewebe schließlich dem umgebenden Knochen an. Das Erscheinungsbild des Zahnfaches während dieses Vorgangs durchläuft verschiedene Stadien, welche in der vorliegenden Studie anhand von klinischen Röntgenaufnahmen rezenter Patienten sowie durch Untersuchungen an archäologischen Skelettserien identifiziert wurden. Die Heilungsvorgänge im Zahnfach können in eine prä-ossale Phase (innerhalb einer Woche nach Zahnverlust), eine Verknöcherungsphase (etwa 14 Wochen nach Zahnverlust) und eine ossifizierte bzw. komplett verheilte Phase (mindestens 29 Wochen nach Zahnverlust) eingeteilt werden. Etliche Faktoren – wie etwa die Resorption des Interdentalseptums, der Zustand des Alveolarknochens oder das Individualgeschlecht – können den normalen Heilungsprozess signifikant beschleunigen oder hemmen und so Unterschiede von bis zu 19 Wochen verursachen. Weitere Variablen wirkten sich nicht signifikant auf den zeitlichen Rahmen des Heilungsprozesse aus. Relevante Abhängigkeiten zwischen verschiedenen Variabeln wurden ungeachtet der Alveolenauffüllung ebenfalls getestet. Gruppen von unabhängigen Variabeln wurden im Hinblick auf Auffüllungsgrad und TSL in multivariablen Modellen untersucht. Mit Hilfe dieser Ergebnisse ist eine grobe Einschätzung der Zeitspanne nach einem Zahnverlust in Wochen möglich, wobei die Einbeziehung weiterer Parameter eine höhere Präzision ermöglicht. rnrnObwohl verschiedene dentale Pathologien in dieser Studie berücksichtigt wurden, sollten zukünftige Untersuchungen genauer auf deren potenzielle Einflussnahme auf den alveolaren Heilungsprozess eingehen. Der kausale Zusammenhang einiger Variablen (wie z. B. Anwesenheit von Nachbarzähnen oder zahnmedizinische Behandlungen), welche die Geschwindigkeit der Heilungsrate beeinflussen, wäre von Bedeutung für zukünftige Untersuchungen des oralen Knochengewebes. Klinische Vergleichsstudien an forensischen Serien mit bekannter TSL oder an einer sich am Anfang des Heilungsprozesses befindlichen klinischen Serie könnten eine Bekräftigung dieser Ergebnisse liefern.

Models and Algorihtm for the Optimization of Real-World Routing and Logistics Problems

Logistics involves planning, managing, and organizing the flows of goods from the point of origin to the point of destination in order to meet some requirements. Logistics and transportation aspects are very important and represent a relevant costs for producing and shipping companies, but also for public administration and private citizens. The optimization of resources and the improvement in the organization of operations is crucial for all branches of logistics, from the operation management to the transportation. As we will have the chance to see in this work, optimization techniques, models, and algorithms represent important methods to solve the always new and more complex problems arising in different segments of logistics. Many operation management and transportation problems are related to the optimization class of problems called Vehicle Routing Problems (VRPs). In this work, we consider several real-world deterministic and stochastic problems that are included in the wide class of the VRPs, and we solve them by means of exact and heuristic methods. We treat three classes of real-world routing and logistics problems. We deal with one of the most important tactical problems that arises in the managing of the bike sharing systems, that is the Bike sharing Rebalancing Problem (BRP). We propose models and algorithms for real-world earthwork optimization problems. We describe the 3DP process and we highlight several optimization issues in 3DP. Among those, we define the problem related to the tool path definition in the 3DP process, the 3D Routing Problem (3DRP), which is a generalization of the arc routing problem. We present an ILP model and several heuristic algorithms to solve the 3DRP.

Devising: Pioneering Uncharted Territory in Theater

Throughout theatre history, styles of theatre have come in and out of favor in response to the zeitgeist of the period. Neoclassical, Melodrama, Naturalism, all have their place in history offering enlightenment, passion and truth each in tune with the values of the culture in which it was created. As society transforms, so too does the stage, offering new ways to reflect, interpret and challenge our assumptions about the changing world. Our current society wrestles with a ‘shrinking world’, a world consumed with technological advances that fan the fire of the growing interconnectedness of human beings all over the earth. This ‘shrinking world’ phenomenon has the effect of an‘expanded world awareness’. That is to say, now more than ever we question all assumption regarding singular perspectives and cultural convictions. What our new society values is diversification of insight and a myriad of experiences from which to draw our conclusions about the world in which we live. The kind of theatre that fills this need is Devised Theatre. Theatre is a collaborative art form by nature. Theatre cannot be practiced alone. One must partner other artists as well as an audience in order to create a theatre performance. Theatre is a dialogue which can take many shapes. Devised Theatre is a process of making theatre that enables a group of performers to be physically and practically creative in the sharing and shaping of an original product that directly emanates from assembling, editing and reshaping individual’s contradictory experiences of the world. A devised theatre product is a work that has emerged from and been generated by a group of people working in collaboration. There is an emphasis on a way of working that values an accumulation of ideas. (Oddey)