Different molecular and structural adaptations with eccentric and conventional strength training in elderly men and women

Reprogramming of gene expression contributes to structural and functional adaptation of muscle tissue in response to altered use. The aim of this study was to investigate mechanisms for observed improvements in leg extension strength, gain in relative thigh muscle mass and loss of body and thigh fat content in response to eccentric and conventional strength training in elderly men (n = 14) and women (n = 14; average age of the men and women: 80.1 ± 3.7 years) by means of structural and molecular analyses. Biopsies were collected from m. vastus lateralis in the resting state before and after 12 weeks of training with two weekly resistance exercise sessions (RET) or eccentric ergometer sessions (EET). Gene expression was analyzed using custom-designed low-density PCR arrays. Muscle ultrastructure was evaluated using EM morphometry. Gain in thigh muscle mass was paralleled by an increase in muscle fiber cross-sectional area (hypertrophy) with RET but not with EET, where muscle growth is likely occurring by the addition of sarcomeres in series or by hyperplasia. The expression of transcripts encoding factors involved in muscle growth, repair and remodeling (e.g., IGF-1, HGF, MYOG, MYH3) was increased to a larger extent after EET than RET. MicroRNA 1 expression was decreased independent of the training modality, and was paralleled by an increased expression of IGF-1 representing a potential target. IGF-1 is a potent promoter of muscle growth, and its regulation by microRNA 1 may have contributed to the gain of muscle mass observed in our subjects. EET depressed genes encoding mitochondrial and metabolic transcripts. The changes of several metabolic and mitochondrial transcripts correlated significantly with changes in mitochondrial volume density. Intramyocellular lipid content was decreased after EET concomitantly with total body fat. Changes in intramyocellular lipid content correlated with changes in body fat content with both RET and EET. In the elderly, RET and EET lead to distinct molecular and structural adaptations which might contribute to the observed small quantitative differences in functional tests and body composition parameters. EET seems to be particularly convenient for the elderly with regard to improvements in body composition and strength but at the expense of reducing muscular oxidative capacity.

Effect of endurance, speed and strength training on skin temperature measured by infrared thermography = Efecto del entrenamiento de resistencia, velocidad y fuerza en la temperatura de la piel a través de la termografía infrarroja

La termografía infrarroja (TI) es una técnica no invasiva y de bajo coste que permite, con el simple acto de tomar una fotografía, el registro sin contacto de la energía que irradia el cuerpo humano (Akimov & Son’kin, 2011, Merla et al., 2005, Ng et al., 2009, Costello et al., 2012, Hildebrandt et al., 2010). Esta técnica comenzó a utilizarse en el ámbito médico en los años 60, pero debido a los malos resultados como herramienta diagnóstica y la falta de protocolos estandarizados (Head & Elliot, 2002), ésta se dejó de utilizar en detrimento de otras técnicas más precisas a nivel diagnóstico. No obstante, las mejoras tecnológicas de la TI en los últimos años han hecho posible un resurgimiento de la misma (Jiang et al., 2005, Vainer et al., 2005, Cheng et al., 2009, Spalding et al., 2011, Skala et al., 2012), abriendo el camino a nuevas aplicaciones no sólo centradas en el uso diagnóstico. Entre las nuevas aplicaciones, destacamos las que se desarrollan en el ámbito de la actividad física y el deporte, donde recientemente se ha demostrado que los nuevos avances con imágenes de alta resolución pueden proporcionar información muy interesante sobre el complejo sistema de termorregulación humana (Hildebrandt et al., 2010). Entre las nuevas aplicaciones destacan: la cuantificación de la asimilación de la carga de trabajo físico (Čoh & Širok, 2007), la valoración de la condición física (Chudecka et al., 2010, 2012, Akimov et al., 2009, 2011, Merla et al., 2010), la prevención y seguimiento de lesiones (Hildebrandt et al., 2010, 2012, Badža et al., 2012, Gómez Carmona, 2012) e incluso la detección de agujetas (Al-Nakhli et al., 2012). Bajo estas circunstancias, se acusa cada vez más la necesidad de ampliar el conocimiento sobre los factores que influyen en la aplicación de la TI en los seres humanos, así como la descripción de la respuesta de la temperatura de la piel (TP) en condiciones normales, y bajo la influencia de los diferentes tipos de ejercicio. Por consiguiente, este estudio presenta en una primera parte una revisión bibliográfica sobre los factores que afectan al uso de la TI en los seres humanos y una propuesta de clasificación de los mismos. Hemos analizado la fiabilidad del software Termotracker, así como su reproducibilidad de la temperatura de la piel en sujetos jóvenes, sanos y con normopeso. Finalmente, se analizó la respuesta térmica de la piel antes de un entrenamiento de resistencia, velocidad y fuerza, inmediatamente después y durante un período de recuperación de 8 horas. En cuanto a la revisión bibliográfica, hemos propuesto una clasificación para organizar los factores en tres grupos principales: los factores ambientales, individuales y técnicos. El análisis y descripción de estas influencias deben representar la base de nuevas investigaciones con el fin de utilizar la TI en las mejores condiciones. En cuanto a la reproducibilidad, los resultados mostraron valores excelentes para imágenes consecutivas, aunque la reproducibilidad de la TP disminuyó ligeramente con imágenes separadas por 24 horas, sobre todo en las zonas con valores más fríos (es decir, zonas distales y articulaciones). Las asimetrías térmicas (que normalmente se utilizan para seguir la evolución de zonas sobrecargadas o lesionadas) también mostraron excelentes resultados pero, en este caso, con mejores valores para las articulaciones y el zonas centrales (es decir, rodillas, tobillos, dorsales y pectorales) que las Zonas de Interés (ZDI) con valores medios más calientes (como los muslos e isquiotibiales). Los resultados de fiabilidad del software Termotracker fueron excelentes en todas las condiciones y parámetros. En el caso del estudio sobre los efectos de los entrenamientos de la velocidad resistencia y fuerza en la TP, los resultados muestran respuestas específicas según el tipo de entrenamiento, zona de interés, el momento de la evaluación y la función de las zonas analizadas. Los resultados mostraron que la mayoría de las ZDI musculares se mantuvieron significativamente más calientes 8 horas después del entrenamiento, lo que indica que el efecto del ejercicio sobre la TP perdura por lo menos 8 horas en la mayoría de zonas analizadas. La TI podría ser útil para cuantificar la asimilación y recuperación física después de una carga física de trabajo. Estos resultados podrían ser muy útiles para entender mejor el complejo sistema de termorregulación humano, y por lo tanto, para utilizar la TI de una manera más objetiva, precisa y profesional con visos a mejorar las nuevas aplicaciones termográficas en el sector de la actividad física y el deporte Infrared Thermography (IRT) is a safe, non-invasive and low-cost technique that allows the rapid and non-contact recording of the irradiated energy released from the body (Akimov & Son’kin, 2011; Merla et al., 2005; Ng et al., 2009; Costello et al., 2012; Hildebrandt et al., 2010). It has been used since the early 1960’s, but due to poor results as diagnostic tool and a lack of methodological standards and quality assurance (Head et al., 2002), it was rejected from the medical field. Nevertheless, the technological improvements of IRT in the last years have made possible a resurgence of this technique (Jiang et al., 2005; Vainer et al., 2005; Cheng et al., 2009; Spalding et al., 2011; Skala et al., 2012), paving the way to new applications not only focused on the diagnose usages. Among the new applications, we highlighted those in physical activity and sport fields, where it has been recently proven that a high resolution thermal images can provide us with interesting information about the complex thermoregulation system of the body (Hildebrandt et al., 2010), information than can be used as: training workload quantification (Čoh & Širok, 2007), fitness and performance conditions (Chudecka et al., 2010, 2012; Akimov et al., 2009, 2011; Merla et al., 2010; Arfaoui et al., 2012), prevention and monitoring of injuries (Hildebrandt et al., 2010, 2012; Badža et al., 2012, Gómez Carmona, 2012) and even detection of Delayed Onset Muscle Soreness – DOMS- (Al-Nakhli et al., 2012). Under this context, there is a relevant necessity to broaden the knowledge about factors influencing the application of IRT on humans, and to better explore and describe the thermal response of Skin Temperature (Tsk) in normal conditions, and under the influence of different types of exercise. Consequently, this study presents a literature review about factors affecting the application of IRT on human beings and a classification proposal about them. We analysed the reliability of the software Termotracker®, and also its reproducibility of Tsk on young, healthy and normal weight subjects. Finally, we examined the Tsk thermal response before an endurance, speed and strength training, immediately after and during an 8-hour recovery period. Concerning the literature review, we proposed a classification to organise the factors into three main groups: environmental, individual and technical factors. Thus, better exploring and describing these influence factors should represent the basis of further investigations in order to use IRT in the best and optimal conditions to improve its accuracy and results. Regarding the reproducibility results, the outcomes showed excellent values for consecutive images, but the reproducibility of Tsk slightly decreased with time, above all in the colder Regions of Interest (ROI) (i.e. distal and joint areas). The side-to-side differences (ΔT) (normally used to follow the evolution of some injured or overloaded ROI) also showed highly accurate results, but in this case with better values for joints and central ROI (i.e. Knee, Ankles, Dorsal and Pectoral) than the hottest muscle ROI (as Thigh or Hamstrings). The reliability results of the IRT software Termotracker® were excellent in all conditions and parameters. In the part of the study about the effects on Tsk of aerobic, speed and strength training, the results of Tsk demonstrated specific responses depending on the type of training, ROI, moment of the assessment and the function of the considered ROI. The results showed that most of muscular ROI maintained warmer significant Tsk 8 hours after the training, indicating that the effect of exercise on Tsk last at least 8 hours in most of ROI, as well as IRT could help to quantify the recovery status of the athlete as workload assimilation indicator. Those results could be very useful to better understand the complex skin thermoregulation behaviour, and therefore, to use IRT in a more objective, accurate and professional way to improve the new IRT applications for the physical activity and sport sector.

Efeito de diferentes intensidades do treinamento de força nos ganhos de força máxima e hipertrofia muscular

O presente estudo investigou o efeito de diferentes intensidades do treinamento de força (TF), aplicadas com volume total de treino (VTT) equalizado, nos ganhos de força dinâmica máxima (1RM) e massa muscular dos membros superiores e inferiores. Trinta voluntários do sexo masculino, com idade entre 18 e 30 anos, participaram de 12 semanas de TF com uma frequência semanal de duas sessões. Foi utilizado um protocolo de treinamento unilateral com um dos lados do corpo realizando o exercício com intensidade equivalente a 20% 1RM (G20) e o lado contralateral utilizando uma das três intensidades 40%, 60% ou 80% 1RM (G40, G60 e G80, respectivamente). O grupo G20 realizava três séries compostas de repetições até a falha concêntrica e o VTT era calculado e replicado para os demais grupos. A força dinâmica máxima e a área de secção transversa (AST) dos músculos flexores do cotovelo e do vasto lateral foram avaliadas nos momentos pré, 6 semanas e pós-treinamento. Os resultados demonstraram que os grupos G40, G60 e G80 apresentaram ganhos similares de AST (25%, 25,1% e 25%, flexores do cotovelo e 20,5%, 20,4% e 19,5% vasto lateral, respectivamente, p<0,05). Somente o grupo G80 demonstrou diferença significante com o grupo G20 na comparação do período pós-treinamento (25% e 14,4%, respectivamente para os flexores do cotovelo e 19,5% e 7,9%, respectivamente para vasto lateral, p<0,05). Para os ganhos de 1RM o grupo G80 demonstrou maiores aumentos após 12 semanas de TF para a flexão unilateral do cotovelo na posição em pé (54,2% p<0,05) e para o leg press 45º os grupos G60 e G80 demonstraram os maiores aumentos (55,4% e 45,7%, respectivamente, p<0,05). Assim, quando o VTT foi equalizado entre diferentes intensidades (40, 60 e 80% 1RM) os ganhos da AST tanto dos flexores do cotovelo quanto o vasto lateral foram semelhantes e a intensidade de 20% 1RM não causou aumento significante da AST. No que diz respeito a força muscular as intensidades mais elevadas (60% e 80% 1RM) foram superiores em promover ganhos de força do que as demais intensidades utilizadas. Esses dados sugerem que ao equalizar o VTT os ganhos de massa muscular são semelhantes para as intensidades de treinamento entre 40- 80% 1RM. Além disso, a intensidade de 20% 1RM, mesmo com o VTT equalizado com as intensidades maiores, não promove aumentos de massa muscular para ambos os segmentos corporais. Por outro lado, intensidades altas de treinamento produzem os maiores ganhos de força máxima em membros superiores e inferiores

Relação entre força muscular e função motora em pacientes com distrofia muscular de Duchenne: acompanhamento de quatro anos

OBJETIVO: Investigar a relação entre força muscular e função motora, em pacientes com DMD, em um período de 4 anos consecutivos, a partir de avaliações semestrais. MÉTODO: A força muscular foi medida por meio de testes manuais e o cálculo por grupo muscular seguiu o proposto pelo Medical Research Council (MRC) e a função motora pelo método de Medida da Função Motora (MFM), em 43 pacientes (8-30 anos). Foi realizada uma análise descritiva e o teste de correlação de Spearman. Foram investigadas as relações entre pontuações totais e parciais da MRC e da MFM. RESULTADOS: O estudo evidenciou correlações classificadas de moderada a forte relação entre a força muscular e função motora, principalmente com o escore total da MFM e a dimensão D2 (musculatura axial e função motora proximal). Foi encontrada relação negativa moderada entre idade e essas variáveis. CONCLUSÃO: A perda progressiva da função motora tem relação direta e proporcional com a diminuição da força muscular. Quanto maior a idade do paciente, pior sua função motora e força muscular, fornecendo com essa informação, indicadores adicionais da progressão da doença

The comparison of maximal and endurance strength of quadriceps femori in trained and untrained elderly

The purpose of this study was to examine the differences in knee extensor maximal and endurance strength in elderly. Sixteen healthy elderly served as subjects, eight of them trained , age 61.0±8.9 yrs; height, 170.6±6.8 cm; weight, 71.8±11.7 kg [mean ± standard deviation] and eight untrained 61.4±8.1 yrs, height 174.6±7.4 cm; weight 83.9 ±14.2 kg. Maximal strength in single leg extension exercise was measured unilaterally with the dominant leg until the subjects reached their 1 Repetition Maximum (RM) covering the full Range of Motion (ROM). Muscular endurance was obtained with a load of 75% of 1-RM for 3 consecutive sets, with 2 min rest periods till failure. Load at 1 RM was lower in absolute terms in untrained, but not significant, while the relative 1-RM test was significantly lower in untrained subjects (0.20 vs. 0.25 kg load/kg body weight) (p<0.05). The number of repetitions and amount of weight lifted performed of all 3 sets was higher in trained subjects, but not significant. In the trained group both repetitions and the load managed in the third set was significant lower compared with the first two sets. The result that maximal force output is more affected compared to muscular endurance in these subjects might be due to the habitual use of quadriceps femoris muscles during activity of daily living in both trained and untrained elderly.

Correlação entre força muscular do assoalho pélvico, função sexual e qualidade de vida em mulheres de meia idade

Introduction: Menopause is characterized by the depletion of ovarian follicles and the gradual decline in estradiol levels, which ends with the definitive cessation of menstrual periods (menopause). As a result of hypoestrogenism, characteristic symptoms, such as hot flashes, night sweats, vaginal dryness, dyspareunia, insomnia, mood swings and depression can be observed. There is also the weakening of the pelvic floor muscles (MAP) as a result of progressive muscle-aponeurotic and connective atrophy with consequent decreased sexual function. Objective: To evaluate the strength of MAP, sexual function and quality of life of menopausal women. Methodology: This is an observational, analytical, cross-sectional design. The sample consisted of 55 women (35 postmenopausal and 20 perimenopausal), aged between 40 and 65, who were assessed by muscle strength and perineometry test. For the assessment of sexual function and quality of life, used the Female Sexual Function Index (FSFI) and Utian Quality of Life (UQOL), respectively. Statistical analysis was performed using Pearson's correlation and multivariate analysis. Results: The mean age was 52.78 (± 6.47 years). Sexual dysfunction presented, 61.8% of participants (43.62% of postmenopausal and perimenopausal 18.17%). Muscle strength test and the maximum perineometry had a median of 3.00 (Q25: 2 e Q75: 4) and 33,50 cmH20 (Q25: 33,5 e Q75: 46,6), respectively. No correlation was found between sexual function and muscle strength (r = 0.035; p = 0.802) and between sexual function and perineometry (r = 0.126; p = 0.358). The mean total score of UQOL was 74.45 (± 12.23). Weak positive correlation was found between sexual function and quality of life (r = +0.422 p = 0.001). Multivariate analysis identified associations between sexual function and variables: quality of life, climacteric symptoms, physical activity and education level. Conclusions: These results suggest that the climacteric symptoms, quality of life, physical activity and level of education are associated with sexual function in menopausal women. However, the muscular component of sexual function needs to be further investigated in this context.

Efeito do treinamento muscular inspiratório com diferentes cargas na força e função de músculos respiratórios

Background: The inspiratory muscle training (IMT) has been considered an option in reversing or preventing decrease in respiratory muscle strength, however, little is known about the adaptations of these muscles arising from the training with charge. Objectives: To investigate the effect of IMT on the diaphragmatic muscle strength and function neural and structural adjustment of diaphragm in sedentary young people, compare the effects of low intensity IMT with moderate intensity IMT on the thickness, mobility and electrical activity of diaphragm and in inspiratory muscles strength and establish a protocol for conducting a systematic review to evaluate the effects of respiratory muscle training in children and adults with neuromuscular diseases. Materials and Methods: A randomized, double-blind, parallel-group, controlled trial, sample of 28 healthy, both sexes, and sedentary young people, divided into two groups: 14 in the low load training group (G10%) and 14 in the moderate load training group (G55%). The volunteers performed for 9 weeks a home IMT protocol with POWERbreathe®. The G55% trained with 55% of maximal inspiratory pressure (MIP) and the G10% used a charge of 10% of MIP. The training was conducted in sessions of 30 repetitions, twice a day, six days per week. Every two weeks was evaluated MIP and adjusted the load. Volunteers were submitted by ultrasound, surface electromyography, spirometry and manometer before and after IMT. Data were analyzed by SPSS 20.0. Were performed Student's t-test for paired samples to compare diaphragmatic thickness, MIP and MEP before and after IMT protocol and Wilcoxon to compare the RMS (root mean square) and median frequency (MedF) values also before and after training protocol. They were then performed the Student t test for independent samples to compare mobility and diaphragm thickness, MIP and MEP between two groups and the Mann-Whitney test to compare the RMS and MedF values also between the two groups. Parallel to experimental study, we developed a protocol with support from the Cochrane Collaboration on IMT in people with neuromuscular diseases. Results: There was, in both groups, increased inspiratory muscle strength (P <0.05) and expiratory in G10% (P = 0.009) increase in RMS and thickness of relaxed muscle in G55% (P = 0.005; P = 0.026) and there was no change in the MedF (P> 0.05). The comparison between two groups showed a difference in RMS (P = 0.04) and no difference in diaphragm thickness and diaphragm mobility and respiratory muscle strength. Conclusions: It was identified increased neural activity and diagrammatic structure with consequent increase in respiratory muscle strength after the IMT with moderate load. IMT with load of 10% of MIP cannot be considered as a placebo dose, it increases the inspiratory muscle strength and IMT with moderate intensity is able to enhance the recruitment of muscle fibers of diaphragm and promote their hypertrophy. The protocol for carrying out the systematic review published in The Cochrane Library.

Effect of explosive mixture on quality of explosive welds of copper to aluminium

The aim of this research is to investigate the influence of explosive ratio and type of sensitizer on the quality of explosive welds between copper and aluminium alloy plates. The welds were performed on a partially overlapping joint configuration using an emulsion explosive (EE) with two different sensitizers, hollow glass microspheres (HGMS) and expanded polystyrene spheres (EPS). Welds with an improved surface were achieved by using the HGMS sensitizer. A higher wave amplitude was registered in welds produced with the EPS sensitizer. In turn, the dimension of the molten pockets was influenced by the explosive ratio, increasing in size with increases in the values of this parameter. The intermetallic content of these zones varied according to the sensitizer type. Unlike the CuAl2 phase, the Cu-richer phases CuAl and Cu9Al4 were only identified in welds performed using the EPS sensitizer. An increase in hardness was observed at the interface of all welds, which resulted from both the presence of intermetallic phases and the plastic deformation of the materials promoted by the impact. This effect was most evident on the aluminium alloy side. All the welds had a greater strength than copper, i.e. the weakest material of the joint. (C) 2016 Elsevier Ltd. All rights reserved.

Efeitos do Dynamic Tape na prevenção da sensação retardada de desconforto muscular no quadricípite

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciado em Fisioterapia

Efeito do encurtamento muscular dos flexores da anca na actividade muscular dos extensores da anca, durante uma tarefa de agachamento, em jovens jogadores de futebol

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciado em Fisioterapia

Comparación entre los efectos de un programa de entrenamiento de fuerza explosiva mediante bandas elásticas y un programa de entrenamiento con electro-estimulación de cuerpo completo

El objetivo del presente estudio fue analizar los cambios en el rendimiento en función de dos métodos de entrenamiento, el desarrollado mediante electro-estimulación muscular integral (EMI) frente a otro en el que se utilizaron bandas elásticas y que denominamos entrenamiento funcional con elásticos (EFE). La muestra estuvo compuesta por un grupo de diez (N=10) personas físicamente activas (23,04 ± 2,5 años). Se utilizó un diseño cuasi-experimental con medidas pre-post. Y fueron analizados los resultados de las pruebas: salto vertical con ayuda de brazos; y velocidad de desplazamiento en una carrera de ida y vuelta de 12 metros de distancia (6+6). Se realizó un análisis descriptivo de casos y medias. Y dado el tamaño de la muestra se calculó el tamaño del efecto, el cual fue bajo o moderado (d<0,5). Por último se compararon las diferencias de las medias de los grupos mediante la U de Mann Whitney, y las diferencias de las medias en función del tiempo (pre-post) mediante Friedman; en ambos casos los resultados no fueron significativos (p<0,5). En cuanto a los valores descriptivos del pre-post en ambos grupos: el grupo que entrenó con bandas elásticas obtuvo mejores resultados en ambas pruebas que el grupo que entrenó con EMI. En conclusión, el entrenamiento con bandas elásticas, a pesar de no ser significativo, parece mostrarse más efectivo que el entrenamiento con electro-estimulación muscular integral. Si bien, dadas las limitaciones del estudio estos datos hay que tomarlos con la pertinente cautela.

Efectos del tipo de recuperación sobre la oxigenación muscular durante el ejercicio de sentadilla

El objetivo de esta investigación es comprobar los cambios en la oxigenación muscular del recto anterior durante la realización del ejercicio de sentadilla según el tipo de recuperación. Para ello, 11 sujetos varones bien entrenados fueron distribuidos aleatoriamente a tres grupos experimentales: grupo que realiza recuperación pasiva con 2 minutos de descanso (GC), grupo que realiza recuperación activa hasta la estabilización de oxígeno (GA), grupo que realiza recuperación pasiva hasta la estabilización de oxígeno (GP). Todos realizaron la sentadilla hasta los 90º al 65% del 1RM con un 80% del carácter del esfuerzo (CE) (4x10). Los resultados muestran que el tiempo de reoxigenación (TrecSmO2) fue inferior significativamente en GA (77,94 ± 11,08) que en GC (p<0.001). En las inclinaciones medias de ejecución y reoxigenación el GA obtuvo los menores y mayores valores respectivamente y de forma significativa respecto a GC (p<0.001). Estas dos variables obtuvieron una relación inversamente proporcional con una r=-0.9585 (p<0.001). Estos resultados muestran una mejor reoxigenación en el grupo que realizó descanso de forma activa. Se muestra una relación inversamente proporcional entre la inclinaciones de ejecución y recuperación por lo que cuanto más rápida y completa sea la desoxigenación más lenta resultará la reoxigenación. Además, la saturación de oxígeno puede ser un factor de la fatiga neuromuscular y su control durante el entrenamiento de fuerza podría facilitar los objetivos de entrenamiento. Estos resultados muestran, a priori, una mejor recuperación entre series a nivel oxidativo cuando los sujetos realizan una recuperación de forma activa, en comparación con la pasiva.

Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerizing Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A-- water bath at 74ºC for 9 h; B-- water bath at 74ºC for 8 h and temperature increased to 100ºC for 1 h; C-- water bath at 74ºC for 2 h and temperature increased to 100ºC for 1 h;; and D-- water bath at 120ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 sec was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerization Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A) water bath at 74 ºC for 9 h; B) water bath at 74 ºC for 8 h and temperature increased to 100 ºC for 1 h; C) water bath at 74 ºC for 2 h and temperature increased to 100 ºC for 1 h; and D) water bath at 120 ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37 ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 s was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Relationship Between Lower-limb Muscle Strength And Functional Independence Among Elderly People According To Frailty Criteria: A Cross-sectional Study.

Muscle strength and functional independence are considered to be determinants of frailty levels among elderly people. The aim here was to compare lower-limb muscle strength (LLMS) with functional independence in relation to sex, age and number of frailty criteria, and to ascertain the influence of these variables on elderly outpatients' independence. Quantitative cross-sectional study, in a tertiary hospital. The study was conducted on 150 elderly outpatients of both sexes who were in a cognitive condition allowing oral communication, between October 2005 and October 2007. The following instruments were used: five-times sit-to-stand test (FTSST), Functional Independence Measurement (FIM) and Lawton's Instrumental Activities of Daily Living Scale (IADL). Descriptive, comparative, multivariate, univariate and Cronbach alpha analyses were performed. The mean time taken in the FTSST was 21.7 seconds; the mean score for FIM was 82.2 and for IADL was 21.2; 44.7% of the subjects presented 1-2 frailty criteria and 55.3% > 3 criteria. There was a significant association between LLMS and functional independence in relation to the number of frailty criteria, without homogeneity regarding sex and age. Functional independence showed significant influence from sex and LLMS. Elderly individuals with 1 or 2 frailty criteria presented greater independence in all FTSST scores. The subjects with higher LLMS presented better functional independence.