Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases

Entre os polímeros considerados promissores para a remoção seletiva de CO2, destacam-se aqueles que contêm os grupos glicol etilênico (EG). Nesta dissertação, foram obtidos filmes a partir de dispersões aquosas de poliuretano (PU), sintetizadas em trabalho anterior, à base de poli(glicol propilênico) (PPG), copolímero em bloco à base de poli(glicol etilênico) (PEG) e PPG (EG-b-PG), ácido dimetilolpropiônico (DMPA), diisocianato de isoforona (IPDI) e etilenodiamina (EDA). PPG, EG-b-PG e DMPA formaram as regiões flexíveis nas proporções de: PPG 100% e 0% EG-b-PG, PPG 75% e 25% EG-b-PG, PPG 50% e 50% EG-b-PG e PPG 25% e 75% EG-b-PG em termos de equivalentes-gramas. A influência da quantidade dos segmentos de PEG foi avaliada por ensaios de permeação com os gases CO2, CH4 e N2. Os filmes obtidos das dispersões foram caracterizados por espectrometria de infravermelho com transformadas de Fourier (FTIR), análise termogravimétrica (TGA), difração de raios x (DRX) e espalhamento de raios X a baixo ângulo (SAXS). Espectros de FTIR mostraram que os segmentos de EG influenciaram a frequência da banda de carbonila. Curvas de perda de massa (TG) mostraram perfis semelhantes de degradação, enquanto que as curvas derivadas apresentaram diferenças. DRX e SAXS mostraram que os segmentos de PEG promoveram uma maior ordenação na estrutura da membrana. Testes de permeação de gases mostraram que o aumento do teor de PEG aumentou o valor da permeabilidade para o CO2, indicando que os segmentos de PEG interagiram favoravelmente com este gás. Em relação ao CH4 e N2, houve uma diminuição na permeabilidade quando comparados com os valores encontrados para o CO2, sendo atribuído a perda de mobilidade segmental. Em termos de seletividade, para o par CO2/CH4 foi obtido um valor médio de 61,7 para a membrana contendo o maior teor de PEG, e o par CO2/N2 um valor médio de 121,5, sendo superior aos valores encontrados na literatura, tornando o material promissor

Estudo do efeito da adição de poli(glicol etilênico-b-glicol propilênico) na formação de dispersões aquosas poliuretânicas à base de poli(glicol propilênico)

Foram produzidas dispersões aquosas não-poluentes e inovadoras de poli(uretano-uréia) à base de poli(glicol propilênico) (PPG) e de copolímeros em bloco, poli(glicol etilênicob-glicol propilênico), (EG-b-PG) com teor de 7% de unidades de glicol etilênico. Os poli(uretano-uréia)s foram preparados, em duas etapas, pelo método do prepolímero. Na primeira etapa, foram obtidos anionômeros, sintetizados em massa, à base do copolímero EG-bPG, PPG, ácido dimetilol propiônico (DMPA) (gerador dos sítios aniônicos) e diisocianato de isoforona (IPDI). Ainda na primeira etapa, os grupos carboxílicos do DMPA foram submetidos à neutralização com trietilamina (TEA). Na segunda etapa, foi realizada a dispersão do prepolímero anionômero e, em seguida, foi conduzida a reação de extensão de cadeia com a hidrazina (HYD). Nas diferentes formulações, foram variadas a razão NCO/OH e as proporções de PPG e do copolímero em bloco EG-b-PG. Além disso, foram obtidas dispersões aquosas programadas para teores de sólidos de 40 e 50%. As dispersões foram avaliadas quanto ao teor de sólidos totais, tamanho médio de partícula e viscosidade. Os filmes, obtidos por vazamento das dispersões, foram avaliados quanto à absorção de água, termogravimetria (TG) e propriedades mecânicas (ensaio de tração). Os filmes vazados e os monômeros foram caracterizados por espectrometria na região de infravermelho (FTIR) As dispersões obtidas se mostraram adequadas para serem aplicadas como revestimento para madeira, metais e vidro

Caracterização e desenvolvimento de argilas para aplicação em nanocompósitos poliméricos

O Brasil é produtor de argilas e conta com grandes reservas deste recurso natural. Porém, grande parte da sua produção é comercializada seca e moída. O desenvolvimento de argilas para seu uso como reforço em nanocompósitos poliméricos constitui uma opção para os produtores desta matéria prima que teriam assim um produto com maior valor agregado. Este trabalho visa avaliar o potencial uso como nanocarga de duas argilas nacionais provenientes da Bacia de Taubaté, São Paulo, denominadas ALIGRA e SANTA FÉ. As frações de tamanho de partícula médio menor de 0,02 mm, obtidas por peneiramento á úmido da argila homogeneizada e seca, foram utilizadas no desenvolvimento do trabalho experimental. Os estudos de caracterização, envolvendo análise granulométrica, química, mineralógica, morfológica, térmica e textural, revelaram características muito semelhantes em ambas às argilas. Fração argila, maior de 70% em massa. Composição química conforme a definição química de uma argila e os teores de seus componentes mostram valores intermédios entre as apresentadas pelas bentonitas e argila caulinítica usadas com fins de comparação. Ressaltamse boas propriedades adsorventes. Área superficial específica BET ao redor de 120 m2/g, valor maior do que o apresentado por muitas bentonitas naturais (74,5 m2/g). Predominantemente mesoporosas, com poros, maiormente em forma de fenda, característicos da estrutura em camadas das argilas. Baixa capacidade de troca catiônica, 12 meq/100g. Difratogramas de raios-X revelaram a predominância do estratificado ilita/esmectita, caulinita e quartzo na argila ALIGRA, e de ilita, caulinita e quartzo na argila SANTA FÉ. Prosseguiu-se com a argila ALIGRA a preparação da argila organofílica. A argila organofílica foi obtida por troca catiônica com o sal quaternário de amônio: cloro cetril trimetil amônio, depois de homogeneizada em sódio com cloreto de sódio. Análises FTIR e TGA indicaram que houve inserção dos cátions orgânicos. Testes preliminares foram feitas, preparando misturas das argilas com matriz de polipropileno e usando como agente compatibilizante polipropileno enxertado com anidrido maleico. Resultados de ensaios de tração reportam algumas melhoras nas propriedades testadas com as composições preparadas com as argilas purificadas. Com as composições com argilas organofílicas somente foi melhorado o alongamento na rotura. Estudos ais aprofundados são recomendados.

Role of transglutaminase-mediated cross-linking of protein in the temperature-dependent setting of Alaska pollack surimi

During the low temperature setting of fish paste, myosin heavy chain (MHC) is polymerized to cross-linked myosin heavy chain (CMHC), which is considered to occur by the action of endogenous transglutaminase (TGase). In this study the contribution of TGase on the setting of Alaska pollack surimi at different temperatures was studied. Alaska pollack surimi was ground with 3% NaCl, 30% h2o and with or without ethylene glycol bis (β-aminoethylether) N, N, N¹,N¹- tetra acetic acid (EGTA), an inhibitor of TGase. Among the pastes without EGTA, highest TGase activity was observed at 25°C but breaking force of the gel set at 25°C was lower than that set at 30°, 35°, and 40°C. Addition of EGTA (5m mol/kg) to the paste suppressed TGase activity at all setting temperatures from 20° to 40°C. Gelation of the pastes and cross-linking of MHC on addition of EGTA were suppressed completely at 20° and 25°C, partially at 30° and 35°C, and not at all at 40°C. The findings suggested that during the setting of Alaska pollack surimi TGase mediated cross-linking of MHC was strong at around 25°C but the thermal aggregation of MHC by non-covalent bonds was strong at above 35°C. Setting of surimi at 40°C and cross-linking of its MHC did not involve TGase.

不同防冻剂对兔胚胎干细胞慢速冷冻保存的影响

干细胞冷冻保存是干细胞研究和临床应用中的必需技术.为提高兔胚胎干细胞在慢速冻存过程中的保存效果,比较了二甲基亚砜(DMSO)和乙二醇(ethylene glycol,EG)对兔胚胎干细胞冷冻保护效果.对冷冻复苏后的细胞进行台盼蓝染色,并研究其胚胎干细胞分子特性,结果表明DMSO比EG具有更好的冷冻保护效果.再在以10% DMSO为基础的防冻液中添加膜稳定剂海藻糖(trehalose)或谷氨酰胺(glutamine),细胞冷冻复苏后结果显示,谷氨酰胺对兔胚胎干细胞有明显的冷冻保护作用,使细胞存活率从71%提高到83.7%.当谷氨酰胺浓度为0、5、10、20、40 mmol/L分别加入防冻液中后,20 mmol/L的谷氨酰胺具有最佳的冷冻保护效果.以上结果得出兔胚胎干细胞慢速冷冻的防冻液改进配方为:在胚胎干细胞培养液中添加10% DMSO+20 mmol/L谷氨酰胺.

Vitrification of Yunnan Yellow Cattle oocytes: work in progress

The objective of this study was to provide a simple cryopreservation method for oocytes from Yunnan Yellow Cattle and facilitate preservation efforts in this native Chinese breed, which is threatened by agricultural modernization. Cumulus-oocyte complexes (COCs) were collected from slaughterhouse ovaries and matured in vitro for 22-24 h, then selected for cryopreservation. Vitrification in open pulled straws (OPS) or in microdrops on a cooled metal surface (solid surface vitrification, SSV) was compared. The OPS vitrification solution consisted of 20% ethylene glycol (EG) and 20% DMSO. The SSV solution was a mixture of 35% EG, 5% polyvinyl-pyrrolidon (PVP) and 0.4 M trehalose. Vitrified and warmed oocytes were either fertilized in vitro or parthenogenetically activated. The rates of cleavage and development to blastocysts of fertilized oocytes following OPS versus SSV were not statistically different (38.3 and 12.5% versus 35.8 and 6.0%, respectively). The corresponding rates of parthenogenetic development to blastocysts were also not different (8.2 versus 3.5%, respectively). Development to blastocysts of non-vitrified controls following fertilization was significantly higher than that of the vitrified oocytes (22.6%, P < 0.05). These results demonstrate for the first time, that although both OPS and SSV procedures reduced embryonic development, Yunnan Yellow Cattle oocytes are capable of developing to blastocysts following cryopreservation. (C) 2002 Elsevier Science Inc. All rights reserved.

Effects of various extenders and permeating cryoprotectants on cryopreservation of cynomolgus monkey (Macaca fascicularis) spermatozoa

The cryoprotective effects of 11 different extenders, TTE, DM, mDM, LG-DM, G-DM, TCG, TEST, TSM, Test-M, Test-H, and LM, on sperm cryopreservation of cynomolgus monkey (Macaca fascicularis) have been compared with glycerol as cryoprotectant. Sperm motility, plasma membrane, and acrosomal integrity were examined to evaluate frozen-thawed sperm function. The results showed that TTE, DM, mDM, LG-DM, G-DM, and TCG exhibited the best and similar protective efficiencies for cynomolgus monkey sperm cryopreservation in terms of sperm motility and plasma membrane integrity (P > .05). The acrosomal integrity for spermatozoa cryopreserved in TCG was statistically lower than that of TTE, DM, mDM, LG-DM, and G-DM (P < .05) but was significantly higher than that of TEST, TSM, Test-M, Test-H, and LM (P < .05). The postthaw sperm motility for 5 other extenders (TEST, TSM, Test-M, Test-H, and LIVI) did not exceed 30%, and the 3 sperm parameters evaluated for them were significantly lower than that of TTE, DM, mDM, LG-DM, G-DM, and TCG (P < .05). On the basis of these findings, 5 commonly used permeating cryoprotectants, glycerol, ethylene glycol, dimethyl sulfoxide, acetamide and propylene glycol have further been tested for their effectiveness on sperm cryopreservation in extenders of TTE, DM, mDM, LG-DM, G-DM, and TCG. The results showed that the sperm cryoprotective efficiencies of glycerol and ethylene glycol were similar and best among 5 permeating cryoprotectant treatments (P > .05). Dimethyl sulfoxide or acetamide resulted in average cryoprotection for cynomolgus monkey spermatozoa: poorer than glycerol or ethylene glycol but better than that of propylene glycol (P < .05). In addition, the action of permeating cryoprotectant appeared to be independent of extenders. The results in the present study demonstrate that 1) TTE, DM, mDM, LG-DM, G-DM, and TCG are excellent extenders and suitable for cynomolgus monkey sperm cryopreservation; 2) the mechanism of action of permeating cryoprotectants are not affected by extender composition; 3) ethylene glycol has a similar cryoprotective efficacy to glycerol that makes it a successful cryoprotectant for sperm cryopreservation in cynomolgus monkeys.

The application of SnS nanoparticles to bulk heterojunction solar cells

Tin mono-sulphide (SnS) nanoparticles were synthesized by a facile method. Reactions producing narrow size distribution SnS nanoparticles with the diameter of 5.0-10 nm were carried out in an ethylene glycol solution at 150 degrees C for 24 h. Bulk heterojunction solar cells with the structure of indium tin oxide (ITO)/polyethylenedioxythiophene polystyrenesulphonate (PEDOT PSS)/SnS polymer/Al were fabricated by blending the nanoparticles with a conjugated polymer to form the active layer for the first time. Current density-voltage characterization of the devices showed that due to the addition of SnS nanoparticles to the polymer film, the device performance can be dramatically improved, compared with that of the pristine polymer solar cells. (c) 2009 Published by Elsevier B.V.

Molecular Dynamics Simulation on Characteristics of Decomposition of Methane Hydrate in the Presence of Hydrogen Peroxide Solution

In this work, the characteristics of the decomposition of methane hydrate Structure I (SI) in the presence of hydrogen peroxide solution is investigated using the molecular dynamics simulation. The mechanism of the transformation process from the solid hydrate to the liquid is analyzed with the effect of hydrogen peroxide (HP) solution. In addition, the effect of ethylene glycol (EG) with the same molar concentration with HP on the methane hydrate dissociation is also studied. The results illustrate that both HP and EG promote well the hydrate dissociation. The work provides the important reference value for the experimental investigation into the promotion effect of HP on the hydrate dissociation.

Molecular Dynamics Simulation of Methane Hydrate Dissociation Process in the Presence of Thermodynamic Inhibitor

The dissociation of methane hydrate in the presence of ethylene glycol (11.45 mol.L-1) at 277.0 K was studied using canonical ensemble (NVT) molecular dynamics simulations. Results show that hydrate dissociation starts from the surface layer of the solid hydrate and then gradually expands to the internal layer. Thus, the solid structure gradually shrinks until it disappears. A distortion of the hydrate lattice structure occurs first and then the hydrate evolves from a fractured frame to a fractional fragment. Finally, water molecules in the hydrate construction exist in the liquid state. The inner dissociating layer is, additionally, coated by a liquid film formed from outer dissociated water molecules outside. This film inhibits the mass transfer performance of the inner molecules during the hydrate dissociation process.

聚甲基丙烯酸多缩乙二醇二酯－锂盐－溶剂三组份凝胶聚合物电解质的制备、导电性能和导电机理研究

由极性聚合物-碱金属盐构成的聚合物固体电解质（SPE）是一类很有前途的离子导电材料。但此类SPE，比通常非水介质电解质溶液约低3个数量级，故极需发展电导率更高的新型SPE材料。目前，由极性（或交联）聚合物、碱金属盐和高介电常数溶剂三组份构成的新一代SPE正在崛起，其室温电导率的达10~（－3）S·cm~(-1)。本工作以甲基丙烯酸多缩乙二醇二酯为大分子单体，研究了三组份凝胶电解质的制备、各组分的变化和温度等对膜强度和电导率的影响；并研究了该凝胶体系中离子传导机理。

Effect of cryoprotectants on hatching rate of red seabream (Pagrus major) embryos

The objectives were to investigate the effect of cryoprotectants on the hatching rate of red seabream embryos. Heart-beat embryos were immersed in: five permeable cryoprotectants, dimethyl sulfoxide (DMSO), glycerol (Gly), methanol (MeOH), 1,2-propylene glycol (PG), and ethylene glycol (EG). in concentrations of 5-30% for 10, 30, or 60 min; and two non-permeable cryoprotectants: polyvinylpyrrolidone (PVP), and sucrose (in concentrations of 5-20% for 10 or 30 min). The embryos were then washed and incubated in filtered seawater until hatching occurred. The hatching rate of the embryos treated with permeable cryoprotectants decreased (P < 0.05) with increased concentration and duration of exposure. In addition, PG was the least toxic permeable cryoprotectant, followed by DMSO and EG, whereas Gly and MeOH were the most toxic. At a concentration of 15% and 30 min exposure, the hatching rate of the embryos immersed in PG was 93.3 +/- 7.0% (mean +/- S.D.), however. in DMSO. EG, Gly. and MeOH, it was 82.7 +/- 10.4, 22.0 +/- 5.7, 0.0 +/- 0.0, and 0.0 +/- 0.0%, respectively. Hatching rate of embryos treated with PVP decreased (P < 0.05) with the increase of concentration and exposure time, whereas for embryos treated with sucrose, there was no significant decrease in comparison with the control at the concentrations used. (C) 2008 Elsevier Inc. All rights reserved.

兔胚胎干细胞冷冻保存的研究

胚胎干细胞(embryonic stem cells, ES 细胞)起源于着床前胚胎内的细胞群，对 鼠ES 细胞研究已经有20 多年，但直到1998 年才首次报道从人的胚胎中获得ES 细胞，2006 年本实验室从兔体外受精胚胎的内细胞团分离建立了兔胚胎干细胞 系RF。ES 细胞是能在体外长期培养，高度未分化的全能细胞系，可在适合的条 件下分化为胎儿或成体的各种类型的组织细胞。根据这一特性，它们可用于再生 细胞或组织移植。胚胎干细胞的成功冻存是其应用于临床的前提。成功的冻存是 在冷冻、解冻和复苏培养过程中，细胞具有较高的存活率，且仍能保持胚胎干细 胞的自我更新和全能性的特性。目前除了小鼠ES 细胞用常规慢速冷冻方法可以 达到95%以上的未分化集落复苏率外(Yao & Yuan, 2005)，其它物种尤其是灵长 类的许多ES 细胞系用常规慢速冷冻方法的复苏率极低，极大地限制了这些细胞 的临床应用。为提高兔胚胎干细胞RF 在慢速冷冻中的保存效果, 本研究比较了 二甲基亚砜(DMSO)和乙二醇（ethylene glycol，EG）对兔胚胎干细胞冷冻保护效 果。对冷冻复苏后的细胞进行台盼蓝染色，并研究其胚胎干细胞的分子特性，结 果表明， DMSO 比EG 具有更好的冷冻保护效果。再在以10% DMSO 为基础的 防冻液中添加膜稳定剂海藻糖或谷氨酰胺，细胞冷冻复苏后结果显示, 谷氨酰胺 对兔胚胎干细胞有明显的冷冻保护作用，使细胞存活率从71%提高到83.7%。当 谷氨酰胺浓度为0、5、10、20、40mmol/L 分别加入防冻液中后，20mmol/L 的 谷氨酰胺具有最佳的冷冻保护效果。以上结果得出兔胚胎干细胞慢速冷冻的防冻 液改进配方为：胚胎干细胞培养液中添加10% DMSO+20 mmol/L 谷氨酰胺.

Surface Initiated Polymerization from Substrates of Low Initiator Density and Its Applications in Biosensors

Surface initiated polymerization (SIP) has become an attractive method for tailoring physical and chemical properties of surfaces for a broad range of applications. Most of those application relied on the merit of a high density coating. In this study we explored a long overlooked field of SIP. SIP from substrates of low initiator density. We combined ellipsometry with AFM to investigate the effect of initiatior density and polymerization time on the morphology of polymer coatings. In addition, we carefully adjusted the nanoscale separation of polymer chains to achieve a balance between nonfouling and immobilization capacities. We further tested the performance of those coating on various biosensors, such as quartz crystal microbalance, surface plasmon resonance, and protein microarrays. The optimized matrices enhanced the performance of those biosensors. This report shall encourage researches to explore new frontiers in SIP that go beyond polymer brushes.