Global stabilizing feedback law for a problem of biological control of mosquito-borne diseases

The control of the spread of dengue fever by introduction of the intracellular parasitic bacterium Wolbachia in populations of the vector Aedes aegypti, is presently one of the most promising tools for eliminating dengue, in the absence of an efficient vaccine. The success of this operation requires locally careful planning to determine the adequate number of mosquitoes carrying the Wolbachia parasite that need to be introduced into the natural population. The latter are expected to eventually replace the Wolbachia-free population and guarantee permanent protection against the transmission of dengue to human. In this paper, we propose and analyze a model describing the fundamental aspects of the competition between mosquitoes carrying Wolbachia and mosquitoes free of the parasite. We then introduce a simple feedback control law to synthesize an introduction protocol, and prove that the population is guaranteed to converge to a stable equilibrium where the totality of mosquitoes carry Wolbachia. The techniques are based on the theory of monotone control systems, as developed after Angeli and Sontag. Due to bistability, the considered input-output system has multivalued static characteristics, but the existing results are unable to prove almost-global stabilization, and ad hoc analysis has to be conducted.

The manufacturing industry in Brazil in the era of global value chains

This article presents a comprehensive and detailed overview of the international trade performance of the manufacturing industry in Brazil over the last decades, emphasizing its participation in Global Value Chains. It uses information from recent available global inputoutput tables such as WIOD (World Input-output database) and TIVA (Trade in Value Added, OECD) as well as complementary information from the GTAP 8 (Global Trade Analysis Project) database. The calculation of a broad set of value added type indicators allows a precise contextualization of the ongoing structural changes in the Brazilian industry, highlighting the relative isolation of its manufacturing sector from the most relevant international supply chains. This article also proposes a public policy discussion, presenting two case studies: the first one related to trade facilitation and the second one to preferential trade agreements. The main conclusions are twofold: first, the reduction of time delays at customs in Brazil may significantly improve the trade performance of its manufacturing industry, specially for the more capital intensive sectors which are generally the ones with greater potential to connection to global value chains; second, the extension of the concept of a “preferential trade partner” to the context of the global unbundling of production may pave the way to future trade policy in Brazil, particularly in the mapping of those partners whose bilateral trade relations with Brazil should receive greater priority by policy makers

Geração de renda e ocupações na cadeia agroindustrial de castanha de caju no Rio Grande do Norte: o caso do sertão de Apodi

This work is part of the research group studying agribusiness chains, by characterizing agroindustrial chain of cashew nuts in Rio Grande do Norte, with special emphasis on Sertão de Apodi Citizenship Territory, showing their different flows and linkages and analyzes generating jobs and income in the production of this good, from the experience of COOPAPI, using as a methodology for analyzing the input-output matrix. And this is justified by the fact that Brazil is in the context as the world's fifth largest producer of cashew nuts and the production of this product focus in the Northeast, especially the Rio Grande do Norte, which is the second largest producer of region, behind only the state of Ceará, which is the largest producer in the country. Moreover, in recent years the state has increased its insertion in international markets this product, particularly the Mossoró-Assu Territory, which constitutes the largest producer in the state, particularly the municipality of Serra do Mel, which has an arrangement different yield, based on the model of integrated rural development, embodied in family farming. Nevertheless, the Sertão de Apodi Citizenship appear as the fourth among the Citizenship territories of Rio Grande do Norte in the ranking of the production of cashew nuts, but the prevailing model of Cooperatives in the Territory, based on the Solidarity Economy, i,e, different from the old cooperative, which is based on the precepts as patronage, with cooperative owners, favor, etc.., encourages scientific research. In this, after a careful analysis of data from field research, it was noticed that among the links in the chain, the production link is what generates the most jobs, while the processing link commands to generate income, but a portion meaningful occupations and income are generated outside the territory, especially out of state RN, denouncing the gap in supply of some specific demands within the chain

Proposal of an alternative transmission line model for symmetrical and asymmetrical configurations

This article shows a transmission line model for simulation of fast and slow transients, applied to symmetrical or asymmetrical configurations. A transmission line model is developed based on lumped elements representation and state-space techniques. The proposed methodology represents a practical procedure to model three-phase transmission lines directly in time domain, without the explicit or implicit use of inverse transforms. In three-phase representation, analysis modal techniques are applied to decouple the phases in their respective propagation modes, using a correction procedure to set a real and constant matrix for untransposed lines with or without vertical symmetry plane. The proposed methodology takes into account the frequency-dependent parameters of the line and in order to include this effect in the state matrices, a fitting procedure is applied. To verify the accuracy of the proposed state-space model in frequency domain, a simple methodology is described based on line distributed parameters and transfer function associated with input/output signals of the lumped parameters representation. In addition, this article proposes the use of a fast and robust integration procedure to solve the state equations, enabling transient and steady-state simulations. The results obtained by the proposed methodology are compared with several established transmission line models in EMTP, taking into account an asymmetrical three-phase transmission line. The principal contribution of the proposed methodology is to handle a steady fundamental signal mixed with fast and slow transients, including impulsive and oscillatory behavior, by a practical procedure applied directly in time domain for symmetrical or asymmetrical representations. (C) 2011 Elsevier Ltd. All rights reserved.

A Family of Autoconnected Transformers for 12-and 18-Pulse Converters-Generalization for Delta and Wye Topologies

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structural real time control using fluid magnetorheologic damper

In the last decades there was a great development in the study of control systems to attenuate the harmful effect of natural events in great structures, as buildings and bridges. Magnetorheological fluid (MR), that is an intelligent material, has been considered in many proposals of project for these controllers. This work presents the controller design using feedback of states through LMI (Linear Matrix Inequalities) approach. The experimental test were carried out in a structure with two degrees of freedom with a connected shock absorber MR. Experimental tests were realized in order to specify the features of this semi-active controller. In this case, there exist states that are not measurable, so the feedback of the states involves the project of an estimator. The coupling of the MR damper causes a variation in dynamics properties, so an identification methods, based on experimental input/output signal was used to compare with the numerical application. The identification method of Prediction Error Methods - (PEM) was used to find the physical characteristics of the system through realization in modal space of states. This proposal allows the project of a semi-active control, where the main characteristic is the possibility of the variation of the damping coefficient.

Trade liberalization and industrial pollution in Brazil

Includes bibliography

Análise da estabilidade estática de tensão de sistemas elétricos de potência usando uma rede neural baseada na teoria da ressonância adaptativa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evolução agrária do Nordeste paraense por contas sociais ascendentes: a inclusão das redes mercantis de insumos nos processos metodológicos e o cálculo dos níveis de endogenização

A importância deste trabalho está em analisar a dinâmica da evolução econômica do Nordeste Paraense, por suas estruturas fundamentais de produção no agrário, interpretando-se os resultados por meio dos impactos setoriais e os transbordamentos da renda e do produto na economia. Para tanto, aplicou-se o modelo de Contas Sociais Ascendentes de Base Agrária (Matriz de Insumo-Produto) metodologicamente mais abrangente que as primeiras abordagens aplicadas em trabalhos anteriores realizados por Pires (2002) e André (2004) a mesma região, todas derivadas de Costa (2002abcd), inclusive este trabalho. Entre outras diferenciações, o modelo desenvolvido inicialmente estava ligado internamente pelo fluxo de produtos entre as dimensões geográficas do local, ao estadual e nacional, em que o valor da produção é formado no sentido que vai da produção até o consumo final, ou ainda, do rural para o urbano: segue o sentido que vai da produção local até a demanda final nacional. Para este trabalho, a forma metodologicamente adotada, já apresentada por Costa em 2008, no Sudeste Paraense, incorpora, primordialmente, as cadeias backward de insumos e investimentos em que são reconstituídos os trajetos dos agentes produtores até o “primeiro fornecedor”, tanto para as redes de formação de preço, quanto de salários e margem bruta (markup), o que possibilita, uma análise diferenciada dos multiplicadores quanto aos impactos setoriais, implicando nas análises de retenções e transbordamentos da renda e do produto entre as formas de produção e suas ocorrências estruturais geográficas, na verificação das disposições das forças centrípetas e centrífugas, o que permite fazer interpretações quanto às possibilidades de conexões econômicas locais para o desenvolvimento, a partir dos índices de aglomeração.

Economia dos produtos florestais não-madeireiros no estado do Amapá: sustentabilidade e desenvolvimento endógeno

O extrativismo vegetal, baseado na exploração sustentável dos produtos florestais não madeireiros é uma das alternativas mais consistentes ecologicamente, no que tange a Conservação da biodiversidade e cobertura natural da Floresta Amazônica. Mas, há problemas sistêmicos que não têm deixado este segmento desenvolver-se de forma satisfatória. O vazamento da economia regional dos produtos extrativistas da Amazônia é uma variável que contribui para o baixo nível de desenvolvimento social e econômico da região. É imperativo que sejam realizadas análises econômicas sobre as possibilidades desse novo modelo A solução provisória para esta área foi estabelecida em 1841, com a definição do espaço entre os rios Oiapoque e Araguari como “Área do Contestado”. Ficou definido então, que a gestão da referida área seria feita de forma compartilhada entre os dois Países. A questão da disputa entre Brasil e França pelas terras do Amapá, só se resolveu definitivamente com a intermediação do presidente suíço Walter Hauser, que em 1o de dezembro de 1900, através do protocolo conhecido como “Laudo Suíço”, concedeu a referida área ao Brasil. de desenvolvimento, apoiado nas bases de um capitalismo contemporâneo, que tem procurado aprimorar os mecanismos econômicos de inclusão social de variáveis ambientais como elementos endógenos do sistema produtivo na Amazônia. O Amapá é o estado brasileiro mais preservado (97% de sua cobertura florestal original) e possui 72% do território como áreas protegidas. Este trabalho pretende identificar o nível de contribuição que os produtos não-madeireiros, extraídos nas florestas por populações tradicionais têm na economia do Amapá. Como método central de análise, foi utilizado o modelo de matriz insumo-produto desenvolvido por Wassily Leontief. Este procedimento analítico tem relevante destaque como instrumento prático de análise e planejamento econômico. Além das análises de programação do crescimento econômico setorial, é adequado para estimar, mediante os efeitos multiplicadores, os impactos do crescimento econômico na produção trabalho e renda setorial de toda a economia. O objeto central do trabalho são as análises estruturais dos arranjos produtivos locais dos produtos florestais não-madeireiros do estado do Amapá, em níveis regional e local. O método desenvolvido pelo Francisco de Assis Costa (Contas Sociais Ascendentes Alfa - CS_) foi usado na construção das matrízes, tendo como base os procedimentos analíticos ascendentes de agregação progressiva dos dados locais O setor extrativista dos produtos florestais não -madeireiros do estado do Amapá, com um PIB de R$ 204 milhões no ano de 2009 tem uma participação pequena, com somente 3,07% das riquezas produzidas no estado. Todavia, quando é observado que 86,77% do valor total do PIB (6,65 bilhões de reais) é decorrente de atividades do Setor Terciário e que todo o Setor Produtivo (Primário e Secundário), tem participação de apenas 13,24%, conclui-se que o valor da produção dos produtos florestais não-madeireiros é bem significativo no estado do Amapá.

Potential Economic Damage From Introduction of Brown Tree Snakes, Boiga Irregularis (Reptilia: Colubridae), to The Islands Of Hawai‘i

The Brown Tree Snake (Boiga irregularis) has caused ecological and economic damage to Guam, and the snake has the potential to colonize other islands in the Pacific Ocean. This study quantifies the potential economic damage if the snake were translocated, established in the state of Hawaii, and causing damage at levels similar to those on Guam. Damages modeled included costs of medical treatments due to snakebites, snake-caused power outages, and decreased tourism resulting from effects of the snake. Damage caused by presence of the Brown Tree Snake on Guam was used as a guide to estimate potential economic damage to Hawaii from both medical- and power outage–related damage. To predict tourism impact, a survey was administered to Hawaiian tourists that identified tourist responses to potential effects of the Brown Tree Snake. These results were then used in an input-output model to predict damage to the state economy. Summing these damages resulted in an estimated total potential annual damage to Hawaii of between $593 million and $2.14 billion. This economic analysis provides a range of potential damages that policy makers can use in evaluation of future prevention and control programs.

Fragmentação geopolítica: uma análise estrutural das propostas de separatismo no Brasil

Este trabalho tem por objetivo dar luz ao debate sobre a criação dos novos entes federativos, trazendo elementos objetivos sobre a caracterização socioeconômica dos novos espaços geopolíticos e seus respectivos papéis no novo contexto espacial do sistema inter-regional brasileiro. O artigo traz resultados inéditos para a discussão, buscando, inicialmente, identificar padrões hierárquicos e de dependência espacial e produtiva neste novo contexto federativo. Tais resultados subsidiama analise subsequente dos impactos da nova configuração das transferências constitucionais, que identifica pormeio de simulações comummodelo inter-regional de insumo-produto especialmente calibrado para as 33 regiões consideradas no estudo, não apenas os potenciais ganhadores e perdedores, mas também os mecanismos de interação espacial subjacentes a estes processos.

Supervised classification of basaltic aggregate particles based on texture properties

The strength and durability of materials produced from aggregates (e.g., concrete bricks, concrete, and ballast) are critically affected by the weathering of the particles, which is closely related to their mineral composition. It is possible to infer the degree of weathering from visual features derived from the surface of the aggregates. By using sound pattern recognition methods, this study shows that the characterization of the visual texture of particles, performed by using texture-related features of gray scale images, allows the effective differentiation between weathered and nonweathered aggregates. The selection of the most discriminative features is also performed by taking into account a feature ranking method. The evaluation of the methodology in the presence of noise suggests that it can be used in stone quarries for automatic detection of weathered materials.

Dynamic identification of structures: experimental assessment of modal parameteres through methods in frequency domain, in time-frequency domain and model updating

Among the experimental methods commonly used to define the behaviour of a full scale system, dynamic tests are the most complete and efficient procedures. A dynamic test is an experimental process, which would define a set of characteristic parameters of the dynamic behaviour of the system, such as natural frequencies of the structure, mode shapes and the corresponding modal damping values associated. An assessment of these modal characteristics can be used both to verify the theoretical assumptions of the project, to monitor the performance of the structural system during its operational use. The thesis is structured in the following chapters: The first introductive chapter recalls some basic notions of dynamics of structure, focusing the discussion on the problem of systems with multiply degrees of freedom (MDOF), which can represent a generic real system under study, when it is excited with harmonic force or in free vibration. The second chapter is entirely centred on to the problem of dynamic identification process of a structure, if it is subjected to an experimental test in forced vibrations. It first describes the construction of FRF through classical FFT of the recorded signal. A different method, also in the frequency domain, is subsequently introduced; it allows accurately to compute the FRF using the geometric characteristics of the ellipse that represents the direct input-output comparison. The two methods are compared and then the attention is focused on some advantages of the proposed methodology. The third chapter focuses on the study of real structures when they are subjected to experimental test, where the force is not known, like in an ambient or impact test. In this analysis we decided to use the CWT, which allows a simultaneous investigation in the time and frequency domain of a generic signal x(t). The CWT is first introduced to process free oscillations, with excellent results both in terms of frequencies, dampings and vibration modes. The application in the case of ambient vibrations defines accurate modal parameters of the system, although on the damping some important observations should be made. The fourth chapter is still on the problem of post processing data acquired after a vibration test, but this time through the application of discrete wavelet transform (DWT). In the first part the results obtained by the DWT are compared with those obtained by the application of CWT. Particular attention is given to the use of DWT as a tool for filtering the recorded signal, in fact in case of ambient vibrations the signals are often affected by the presence of a significant level of noise. The fifth chapter focuses on another important aspect of the identification process: the model updating. In this chapter, starting from the modal parameters obtained from some environmental vibration tests, performed by the University of Porto in 2008 and the University of Sheffild on the Humber Bridge in England, a FE model of the bridge is defined, in order to define what type of model is able to capture more accurately the real dynamic behaviour of the bridge. The sixth chapter outlines the necessary conclusions of the presented research. They concern the application of a method in the frequency domain in order to evaluate the modal parameters of a structure and its advantages, the advantages in applying a procedure based on the use of wavelet transforms in the process of identification in tests with unknown input and finally the problem of 3D modeling of systems with many degrees of freedom and with different types of uncertainty.

Advantages and Applications of Transforming Empirical Model Input Space with Dimensional Models

Model-based calibration of steady-state engine operation is commonly performed with highly parameterized empirical models that are accurate but not very robust, particularly when predicting highly nonlinear responses such as diesel smoke emissions. To address this problem, and to boost the accuracy of more robust non-parametric methods to the same level, GT-Power was used to transform the empirical model input space into multiple input spaces that simplified the input-output relationship and improved the accuracy and robustness of smoke predictions made by three commonly used empirical modeling methods: Multivariate Regression, Neural Networks and the k-Nearest Neighbor method. The availability of multiple input spaces allowed the development of two committee techniques: a 'Simple Committee' technique that used averaged predictions from a set of 10 pre-selected input spaces chosen by the training data and the "Minimum Variance Committee" technique where the input spaces for each prediction were chosen on the basis of disagreement between the three modeling methods. This latter technique equalized the performance of the three modeling methods. The successively increasing improvements resulting from the use of a single best transformed input space (Best Combination Technique), Simple Committee Technique and Minimum Variance Committee Technique were verified with hypothesis testing. The transformed input spaces were also shown to improve outlier detection and to improve k-Nearest Neighbor performance when predicting dynamic emissions with steady-state training data. An unexpected finding was that the benefits of input space transformation were unaffected by changes in the hardware or the calibration of the underlying GT-Power model.