Reshaping housing using prefabricated systems

Prefabricated housing innovations have the potential to reduce the environmental impact of construction through improvements to efficiency and quality. The current paper presents a number of recommendations for increasing the adoption of prefabrication based on a review of published evidence. The recommendations consider multiple stakeholders including builders and other intermediaries, suppliers, end-users, as well as their interaction with the broader policy context and technical issues

The use of new generation geosynthetics in water treatment

The importance of clean drinking water in any community is absolutely vital if we as the consumers are to sustain a life of health and wellbeing. Suspended particles in surface waters not only provide the means to transport micro-organisms which can cause serious infections and diseases, they can also affect the performance capacity of a water treatment plant. In such situations pre-treatment ahead of the main plant is recommended. Previous research carried out using non-woven synthetic as a pre-filter materials for protecting slow sand filters from high turbidity showed that filter run times can be extended by several times and filters can be regenerated by simply removing and washing of the fabric ( Mbwette and Graham, 1987 and Mbwette, 1991). Geosynthetic materials have been extensively used for soil retention and dewatering in geotechnical applications and little research exists for the application of turbidity reduction in water treatment. With the development of new materials in geosynthetics today, it was hypothesized that the turbidity removal efficiency can be improved further by selecting appropriate materials. Two different geosynthetic materials (75 micron) tested at a filtration rate of 0.7 m/h yielded 30-45% reduction in turbidity with relatively minor head loss. It was found that the non-woven geotextile Propex 1701 retained the highest performance in both filtration efficiency and head loss across the varying turbidity ranges in comparison to other geotextiles tested. With 5 layers of the Propex 1701 an average percent reduction of approximately 67% was achieved with a head loss average of 4mm over the two and half hour testing period. Using the data collected for the Propex 1701 a mathematical model was developed for predicting the expected percent reduction given the ability to control the cost and as a result the number of layers to be used in a given filtration scenario.

Emerging Planning Frameworks for Climate Adaptation

This chapter focuses on the more strategic activities that lead people in the regional community to decide how they want to respond to climate change. Such strategic activities include analysing, prioritising and deciding upon the best course of action. Planning for climate adaptation (usually seen to include the setting of visions and objectives, the determination of key strategies and the monitoring of broad outcomes) encompasses the strategic activities involved in the system of governance for climate adaptation. Planning occurs at all scales from global to the business, property, family and even individual scales. Applying a rapid appraisal technique, this chapter analyses the system of planning for climate adaptation as it relates to the achievement of adaptation outcomes within the Wet Tropics Cluster. It finds that some aspects of the system are healthier than others, and identifies several actions that regional NRM bodies may consider (either collectively or individually) to enhance adaptation outcomes by improving the planning system within the cluster.

Updates in inducible transgene expression using viral vectors : from transient to stable expression

The prospect of economically producing useful biologics in plants has greatly increased with the advent of viral vectors. The ability of viral vectors to amplify transgene expression has seen them develop into robust transient platforms for the high-level, rapid production of recombinant proteins. To adapt these systems to stably transformed plants, new ways of deconstructing the virus machinery and linking its expression and replication to chemically controlled promoters have been developed. The more advanced of these stable, inducible hyper-expression vectors provide both activated and amplified heterologous transgene expression. Such systems could be deployed in broad acre crops and provide a pathway to fully exploit the advantages of plants as a platform for the manufacture of a wide spectrum of products.

Reshaping housing : the role of prefabricated systems

Prefabricated housing innovations have the potential to reduce the environmental impact of construction through improving efficiency and quality. The current paper systematically summarises the published evidence since 1990 that describes the barriers and drivers affecting the uptake of prefabricated housing innovations. These are discussed in relation to a ‘Project-Based Product Framework’ which considers multiple stakeholders including builders and other intermediaries, suppliers, end-users, the broader policy context and technical issues. The framework facilitated identification of central issues such as the prevalent business and cultural resistance associated with process changes; the potential for efficiency and quality improvements and cost savings; the simultaneous risks and benefits of close supplier-builder relationships, and negative user perceptions towards prefabricated houses. Though there is a lack of evidence regarding the effects of regulations and government policies on prefabrication uptake, there are indications of the positive potential of financial and social incentives. Directions for further research include understanding how to: manage the industry’s transition to prefabricated houses; appropriately compare prefabricated housing to traditional housing on cost, efficiency and quality measures; reconcile the differing perspectives of various stakeholders; quantify and identify the perspectives of the potential end-user population, and manage the interface between the emerging industry and information technology improvements.

Profiling the nature and context of the Australian prefabricated housing industry

The current state of the prefabricated housing market in Australia is systematically profiled, guided by a theoretical systems model. Particular focus is given to two original data collections. The first identifies manufacturers and builders using prefabrication innovations, and the second compares the context for prefabricated housing in Australia with that of key international jurisdictions. The results indicate a small but growing market for prefabricated housing in Australia, often building upon expertise developed through non-residential building applications. The international comparison highlighted the complexity of the interactions between macro policy decisions and historical influences and the uptake of prefabricated housing. The data suggest factors such as the small scale of the Australian market, and a lack of investment in research, development and training have not encouraged prefabrication. A lack of clear regulatory policy surrounding prefabricated housing is common both in Australia and internationally, with local effects in regards to home warranties and housing finance highlighted. Future research should target the continuing lack of consideration of prefabrication from within the housing construction industry, and build upon the research reported in this paper to further quantify the potential end user market and the continuing development of the industry.

What’s driving the uptake of prefabricated housing in Australia?

Prefabrication has been promoted as a means to improve the efficiency of the Australian house building industry. Issues affecting the uptake of prefabrication were identified through interviews with small and medium sized building companies. Prefabrication’s specific impact on housing construction and smaller organisations has not been frequently investigated. Similar past research has been conducted without the use of a clear theoretical grounding guiding the identification of relevant issues. The current study is guided by a combination of the Theory of Planned Behaviour (TPB) and the Technology Acceptance Model (TAM). This allowed the identification of a broad range of issues across attitudinal, normative, behavioural control and technology adaptation domains. Results revealed improved quality was often offset against practical cost implications. While a high quality of prefabricated products was reported, key technical challenges included coordinating the transporting of modules, and balancing standardisation and product flexibility. Resistance from traditional industry stakeholders regarding build methods, financing, and openness to encouraging prefabrication was commonly reported. The key role of government decision making in facilitating greater demand and competitiveness of prefabricated businesses in the consumer marketplace was also highlighted. Further research is currently being undertaken by the authors, which builds on the exploratory results of the current study through confirmatory, quantitative surveying.

Predicting Australian builders’ intentions to use prefabrication

This study presents the results of the first large scale survey of Australian builders’ beliefs about prefabrication, drawing on 454 surveys completed by representatives of building companies in Queensland and Western Australia. Previous literature has identified a number of broad themes affecting the uptake of prefabrication. The current study builds on this work by using a structured theoretical model based on the Theory of Planned Behaviour (TPB) and the Technology Acceptance Model (TAM), to further explore the specific factors influencing builders’ intentions to increase their use of prefabrication. Information was gathered concerning the characteristics of respondents in addition to three aims. The aims were: (1) To identify the relative importance of a number of key factors which may affect builders’ use of prefabrication, (2) To compare the characteristics of builders using various levels of prefabrication (including none), and; (3) To determine if a model based on the TPB, TAM, and other control variables can explain builders’ intentions to adopt prefabrication on their housing projects.

Inducible resistance to maize streak virus

Maize streak virus (MSV), which causes maize streak disease (MSD), is the major viral pathogenic constraint on maize production in Africa. Type member of the Mastrevirus genus in the family Geminiviridae, MSV has a 2.7 kb, single-stranded circular DNA genome encoding a coat protein, movement protein, and the two replication-associated proteins Rep and RepA. While we have previously developed MSV-resistant transgenic maize lines constitutively expressing ‘‘dominant negative mutant’’ versions of the MSV Rep, the only transgenes we could use were those that caused no developmental defects during the regeneration of plants in tissue culture. A better transgene expression system would be an inducible one, where resistance-conferring transgenes are expressed only in MSV-infected cells. However, most known inducible transgene expression systems are hampered by background or ‘‘leaky’’ expression in the absence of the inducer. Here we describe an adaptation of the recently developed INPACT system to express MSV-derived resistance genes in cell culture. Split gene cassette constructs (SGCs) were developed containing three different transgenes in combination with three different promoter sequences. In each SGC, the transgene was split such that it would be translatable only in the presence of an infecting MSV’s replication associated protein. We used a quantitative real-time PCR assay to show that one of these SGCs (pSPLITrepIII-Rb-Ubi) inducibly inhibits MSV replication as efficiently as does a constitutively expressed transgene that has previously proven effective in protecting transgenic maize from MSV. In addition, in our cell-culture based assay pSPLITrepIII-Rb-Ubi inhibited replication of diverse MSV strains, and even, albeit to a lesser extent, of a different mastrevirus species. The application of this new technology to MSV resistance in maize could allow a better, more acceptable product.

Analysing governance of Australia's system of landscape-based greenhouse gas abatement

Healthy governance systems are key to delivering effective outcomes in any broad domain of natural resource management (NRM). One of Australia's emerging NRM governance domains is our national framework for greenhouse gas abatement (GGA), as delivered through a wide range of management practices in the Australian landscape. The emerging Landscape-Based GGA Domain represents an innovative governance space that straddles both the nation's broader NRM Policy and Delivery Domain and Australia's GGA Domain. As a point-in-time benchmark, we assess the health of this hybrid domain as it stood at the end of 2013. At that time, the domain was being progressed through the Australian government's Clean Energy Package and, more particularly, its Carbon Farming Initiative (CFI). While significant changes are currently under development by a new Australian government, this paper explores key areas of risk within the governance system underpinning this emerging hybrid domain at that point in time. We then map some potential reform or continuous improvement pathways required (from national to paddock scale) with the view to securing improved landscape outcomes over time through widespread GGA activities.

On the relevance of travel journalism : An introduction

Not many people will be instantly familiar with British woman Dale Sheppard-Floyd, but – at least symbolically – she represents a significant milestone in the development of travel and tourism. In fact, the milestone was so significant that the United Nations World Tourism Organization booked Madrid’s venerable Museo del Prado to announce to the world’s media her visit to Spain on 13 December 2012. For Ms Sheppard-Floyd’s arrival for a three-day trip meant that more than one billion times in that year, someone had crossed a border as a tourist. An astounding number, considering that, in 1950, there had been only 25 million tourist arrivals worldwide, and even only two decades previously – in 1990 – the number had been less than half at 435 million arrivals (World Tourism Organization, 2012a, 2012b). While people have traveled for pleasure for millennia (Towner, 1995), tourism really came into its own with the expansion of the middle classes in the 19th and 20th century, and today it is considered the world’s largest business sector, with unprecedented numbers of people venturing outside of their immediate environments to explore the world around them. In 2012, travel and tourism’s total contribution to the world economy amounted to a staggering $6.6 trillion, or 9 per cent of GDP (World Travel & Tourism Council, 2013). More than 260 million jobs were generated by it worldwide, which equates to one in every 11 jobs across the globe. While there were some hiccups during the Global Financial Crisis, growth in 2012 was stronger than in other industries, such as manufacturing, financial services and retail (World Travel & Tourism Council, 2013)...

The combination of plant-expressed cellobiohydrolase and low dosages of cellulases for the hydrolysis of sugar cane bagasse

Background The expression of biomass-degrading enzymes (such as cellobiohydrolases) in transgenic plants has the potential to reduce the costs of biomass saccharification by providing a source of enzymes to supplement commercial cellulase mixtures. Cellobiohydrolases are the main enzymes in commercial cellulase mixtures. In the present study, a cellobiohydrolase was expressed in transgenic corn stover leaf and assessed as an additive for two commercial cellulase mixtures for the saccharification of pretreated sugar cane bagasse obtained by different processes. Results Recombinant cellobiohydrolase in the senescent leaves of transgenic corn was extracted using a simple buffer with no concentration step. The extract significantly enhanced the performance of Celluclast 1.5 L (a commercial cellulase mixture) by up to fourfold on sugar cane bagasse pretreated at the pilot scale using a dilute sulfuric acid steam explosion process compared to the commercial cellulase mixture on its own. Also, the extracts were able to enhance the performance of Cellic CTec2 (a commercial cellulase mixture) up to fourfold on a range of residues from sugar cane bagasse pretreated at the laboratory (using acidified ethylene carbonate/ethylene glycol, 1-butyl-3-methylimidazolium chloride, and ball-milling) and pilot (dilute sodium hydroxide and glycerol/hydrochloric acid steam explosion) scales. We have demonstrated using tap water as a solvent (under conditions that mimic an industrial process) extraction of about 90% recombinant cellobiohydrolase from senescent, transgenic corn stover leaf that had minimal tissue disruption. Conclusions The accumulation of recombinant cellobiohydrolase in senescent, transgenic corn stover leaf is a viable strategy to reduce the saccharification cost associated with the production of fermentable sugars from pretreated biomass. We envisage an industrial-scale process in which transgenic plants provide both fibre and biomass-degrading enzymes for pretreatment and enzymatic hydrolysis, respectively.

Report to VicRoads: Extent of unlicensed driving - follow up Ref 143 - Alcohol Harms Inquiry

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. The term "unlicensed driver" is generally used to refer to people who drive or ride a motor vehicle without a valid driver's licence, including those who: • Have let their licence expire, • Have been disqualified or suspended from driving, • Hold an inappropriate licence for the class of vehicle they drive, • Drive outside the restrictions of a special licence, • Don’t currently hold a licence, or • Have never held a licence (Watson, 2003, 2004a)...

Report to VicRoads: Vehicle based sanctions to address drink driving

Licence sanctions including suspension, disqualification, or revocation have been effective in reducing recidivism and crash rates among those convicted of driving while under the influence of alcohol and/or drugs. Nonetheless, studies have indicated that many offenders continue to drive while they are unlicensed. Consequently, more recent attention has been given to vehicle sanctions that separate the offender from their vehicle. Vehicle based interventions focus on incapacitating the vehicle or separating it from the offending driver rather than relying on the threat of further sanctions to encourage compliance. Following on from a previous review conducted by Dr. Ron Christie (2006) for VicRoads, which examined the effectiveness of vehicle based sanctions in deterring unlicensed driving, this report considers the effectiveness of the aforementioned vehicle based sanctions for addressing drink driving.