Réunion African Joint Effort (AJE)

Le 23 et 24 octobre 2003, les représentants des sièges sociaux de l'OMS et du BIT ont rencontré d'autres participants dans le cadre de l'effort conjoint OMS/BIT sur la santé

Prominent use of distal 5’ transcription start sites and discovery of a large number of additional exons in ENCODE regions

This report presents systematic empirical annotation of transcript products from 399 annotated protein-coding loci across the 1% of the human genome targeted by the Encyclopedia of DNA elements (ENCODE) pilot project using a combination of 5' rapid amplification of cDNA ends (RACE) and high-density resolution tiling arrays. We identified previously unannotated and often tissue- or cell-line-specific transcribed fragments (RACEfrags), both 5' distal to the annotated 5' terminus and internal to the annotated gene bounds for the vast majority (81.5%) of the tested genes. Half of the distal RACEfrags span large segments of genomic sequences away from the main portion of the coding transcript and often overlap with the upstream-annotated gene(s). Notably, at least 20% of the resultant novel transcripts have changes in their open reading frames (ORFs), most of them fusing ORFs of adjacent transcripts. A significant fraction of distal RACEfrags show expression levels comparable to those of known exons of the same locus, suggesting that they are not part of very minority splice forms. These results have significant implications concerning (1) our current understanding of the architecture of protein-coding genes; (2) our views on locations of regulatory regions in the genome; and (3) the interpretation of sequence polymorphisms mapping to regions hitherto considered to be "noncoding," ultimately relating to the identification of disease-related sequence alterations.

Investigations of a thermosensitive gel to temporarily occlude crural arteries in femoro-distal bypass surgery

L'artériopathie oblitérante des membres inférieurs (AOMI) est une pathologie de plus en plus fréquemment rencontrée en raison du vieillissement le la population et de l'augmentation de la prévalence du diabète. Les patients souffrant d'AOMI se manifestant par une ichémie critique du membre nécessitent un geste de revascularisation, afin que le risque d'amputation, acte fortement morbide, soit diminué. La revascularisation par voie endovasculaire est de nos jours la technique de premier choix mais en cas d'occlusion longue des artères jambières, une approche chirurgicale avec confection d'un pontage ne peut être évitée. La technique nécessite alors, lors de la confection de l'anastomose, de l'occlusion temporaire de l'artère en amont et en aval de rartériotomie, ce qui est réalisé traditionnellement à l'aide de clamps ou cathéters intravasculaires. Ces instruments présentent différents inconvénients reconnus - efficacité médiocre au vu d'artères fortement calcifiées et induction de lésions endothéliales notamment. Un nouveau type d'instrument est apparu sur le marché après approbation de la FDA, sous forme d'un gel thermosensible qui constitue un bouchon occlusif une fois injecté dans l'artère et se dissout spontanément après quelques minutes. Ce gel ayant été expérimenté avec succès en chirurgie cardiovasculaire chez des animaux, nous avons voulu évaluer l'efficacité et l'innocuité de son utilisation lors de la réalisation de pontages fémoro-jambier dans une cohorte de vingt patients. Différents paramètres opératoires ont été notés tels que le volume de gel injecté, les temps d'occlusion efficace et de confection d'anastomose ainsi que la qualité de l'occlusion vasculaire obtenue. Une artériographie per-opératoire a été réalisée de manière systématique à la recherche d'emboles de gel résiduel. Les taux de perméabilité primaire, de sauvetage de membre et de survie à 6 mois ont été rapportés. Les résultats sont satisfaisants puisque la qualité d'occlusion a été jugée bonne à excellente dans la totalité des cas sans qu'aucun instrument d'occlusion supplémentaire n'ait dû être employé et que le temps d'occlusion dépassait légèrement le temps nécessaire à la confection de l'anastomose. L'artériographie des deux premiers cas seulement a révélé la présence d'emboles distaux, avant que nous corrigions notre technique pour obtenir une dissolution instantanée du gel. Nous avons obtenu à 6 mois un taux de perméabilité primaire de 75% avec un taux de sauvetage de membre à 87.5%, le taux de mortalité à 30 jours étant de 10% - sans relation avec le gel. En conclusion, nous avons montré que l'utilisation de ce gel comme instrument d'occlusion vasculaire temporaire est sûre et efficace lors de la chirurgie de pontage fémoro-jambier. L'hypothèse qu'il pourrait être moins délétère pour l'endothélium et contribuer ainsi à une amélioration du taux de perméabilité des pontages distaux mériterait d'être testée dans le cadre d'une étude randomisée multicentrique.

Multiuser detection in a dynamic environment — Part II: Joint user identification and parameter estimation

The problem of jointly estimating the number, the identities, and the data of active users in a time-varying multiuser environment was examined in a companion paper (IEEE Trans. Information Theory, vol. 53, no. 9, September 2007), at whose core was the use of the theory of finite random sets on countable spaces. Here we extend that theory to encompass the more general problem of estimating unknown continuous parameters of the active-user signals. This problem is solved here by applying the theory of random finite sets constructed on hybrid spaces. We doso deriving Bayesian recursions that describe the evolution withtime of a posteriori densities of the unknown parameters and data.Unlike in the above cited paper, wherein one could evaluate theexact multiuser set posterior density, here the continuous-parameter Bayesian recursions do not admit closed-form expressions. To circumvent this difficulty, we develop numerical approximationsfor the receivers that are based on Sequential Monte Carlo (SMC)methods (“particle filtering”). Simulation results, referring to acode-divisin multiple-access (CDMA) system, are presented toillustrate the theory.

Concrete Pavement Joint Sawing, Cleaning, and Sealing, November 2004

Proper storage practices are critical to protect materials from intermingling, contamination, or degradation, and to maintain consistent aggregate gradation throughout a project. Concrete Paving Workforce Reference no.3

What is the value of joint processing of pilots and data in block-fading channels?

The spectral efficiency achievable with joint processing of pilot and data symbol observations is compared with that achievable through the conventional (separate) approach of first estimating the channel on the basis of the pilot symbols alone, and subsequently detecting the datasymbols. Studied on the basis of a mutual information lower bound, joint processing is found to provide a non-negligible advantage relative to separate processing, particularly for fast fading. It is shown that, regardless of the fading rate, only a very small number of pilot symbols (at most one per transmit antenna and per channel coherence interval) shouldbe transmitted if joint processing is allowed.

Strontium ranelate and alendronate have differing effects on distal tibia bone microstructure in women with osteoporosis.

The structural basis of the antifracture efficacy of strontium ranelate and alendronate is incompletely understood. We compared the effects of strontium ranelate and alendronate on distal tibia microstructure over 2 years using HR-pQCT. In this pre-planned, interim, intention-to-treat analysis at 12 months, 88 osteoporotic postmenopausal women (mean age 63.7 +/- 7.4) were randomized to strontium ranelate 2 g/day or alendronate 70 mg/week in a double-placebo design. Primary endpoints were changes in microstructure. Secondary endpoints included lumbar and hip areal bone mineral density (aBMD), and bone turnover markers. This trial is registered with http://www.controlled-trials.com, number ISRCTN82719233. Baseline characteristics of the two groups were similar. Treatment with strontium ranelate was associated with increases in mean cortical thickness (CTh, 5.3%), cortical area (4.9%) and trabecular density (2.1%) (all P < 0.001, except cortical area P = 0.013). No significant changes were observed with alendronate. Between-group differences in favor of strontium ranelate were observed for CTh, cortical area, BV/TV and trabecular density (P = 0.045, 0.041, 0.048 and 0.035, respectively). aBMD increased to a similar extent with strontium ranelate and alendronate at the spine (5.7% versus 5.1%, respectively) and total hip (3.3% versus 2.2%, respectively). No significant changes were observed in remodeling markers with strontium ranelate, while suppression was observed with alendronate. Within the methodological constraints of HR-pQCT through its possible sensitivity to X-ray attenuation of different minerals, strontium ranelate had greater effects than alendronate on distal tibia cortical thickness and trabecular volumetric density.

Iowa Water Pollution Control Works and Drinking Water Facilities Financing Programs, (Joint Programs of the Iowa Finance Authority and The Iowa Department of Natural Resources), Independent Auditor's Reports, Financial Statements and Supplemental Information, June 30, 2004

State Audit Reports

When mothers work and fathers care. Joint household fertility decisions in Denmark and Spain

We analyze second birth decisions within the theoretical framework of joint household decision making, comparing two countires that represent the international extremes in terms of women's career behaviour, Denmark and Spain. Using all 8 ECHP panels we apply discrete time estimations of the likelihood of a second birth and show that in Spain, fertility behaviour continues to conform to the classic "Becker model" while in Denmark we identify a radically new behavioral pattern according to which career-women's fertility is conditional of their partners' contribution to care for the children.

Joint determinants of education enrolment and first birth timing in France and West Germany

We examined the reciprocal influence between educational decisions and the timing of first births, using the Family and Fertility Surveys of France and West Germany. Since these two processes are potentially endogenous, we modelled them jointly, using event history models. We hypothesise that the reciprocal impact of educational and fertility careers, as well as the impact of the common determinants of both processes, are gender specific and context specific.The results show a significant endogeneity for women and men in both countries. This endogeneity is stronger for women than for men, while no substantial differences are found between the two countries. Removing this shared and unobserved heterogeneity, the results show a stronger reciprocal impact between the processes for women than for men. A similar impact of being enrolled in education on first birth in both countries is found, while the effect of the birth (and especially of the pregnancy) of the first child on terminating one’s education appeared to be more marked in West Gernany than in France.

FRAX® International Task Force of the 2010 Joint International Society for Clinical Densitometry & International Osteoporosis Foundation Position Development Conference.

Osteoporosis is a serious worldwide epidemic. FRAX® is a web-based tool developed by the Sheffield WHO Collaborating Center team, that integrates clinical risk factors and femoral neck BMD and calculates the 10 year fracture probability in order to help health care professionals identify patients who need treatment. However, only 31 countries have a FRAX® calculator. In the absence of a FRAX® model for a particular country, it has been suggested to use a surrogate country for which the epidemiology of osteoporosis most closely approximates the index country. More specific recommendations for clinicians in these countries are not available. In North America, concerns have also been raised regarding the assumptions used to construct the US ethnic specific FRAX® calculators with respect to the correction factors applied to derive fracture probabilities in Blacks, Asians and Hispanics in comparison to Whites. In addition, questions were raised about calculating fracture risk in other ethnic groups e.g., Native Americans and First Canadians. The International Society for Clinical Densitometry (ISCD) in conjunction with the International Osteoporosis Foundation (IOF) assembled an international panel of experts that ultimately developed joint Official Positions of the ISCD and IOF advising clinicians regarding FRAX® usage. As part of the process, the charge of the FRAX® International Task Force was to review and synthesize data regarding geographic and race/ethnic variability in hip fractures, non-hip osteoporotic fractures, and make recommendations about the use of FRAX® in ethnic groups and countries without a FRAX® calculator. This synthesis was presented to the expert panel and constitutes the data on which the subsequent Official Positions are predicated. A summary of the International Task Force composition and charge is presented here.

Evaluation of Transverse Joint Forming Methods for PCC Pavement, January 2006

The members of the Iowa Concrete Paving Association, the National Concrete Pavement Technology Center Research Committee, and the Iowa Highway Research Board commissioned a study to examine alternative ways of developing transverse joints in portland cement concrete pavements. The present study investigated six separate variations of vertical metal strips placed above and below the dowels in conventional baskets. In addition, the study investigated existing patented assemblies and a new assembly developed in Spain and used in Australia. The metal assemblies were placed in a new pavement and allowed to stay in place for 30 days before the Iowa Department of Transportation staff terminated the test by directing the contractor to saw and seal the joints. This report describes the design, construction, testing, and conclusions of the project.

CT arthrography of the glenohumeral joint: CT fluoroscopy versus conventional CT and fluoroscopy--comparison of image-guidance techniques.

PURPOSE: To compare examination time with radiologist time and to measure radiation dose of computed tomographic (CT) fluoroscopy, conventional CT, and conventional fluoroscopy as guiding modalities for shoulder CT arthrography. MATERIALS AND METHODS: Glenohumeral injection of contrast material for CT arthrography was performed in 64 consecutive patients (mean age, 32 years; age range, 16-74 years) and was guided with CT fluoroscopy (n = 28), conventional CT (n = 14), or conventional fluoroscopy (n = 22). Room times (arthrography, room change, CT, and total examination times) and radiologist times (time the radiologist spent in the fluoroscopy or CT room) were measured. One-way analysis of variance and Bonferroni-Dunn posthoc tests were performed for comparison of mean times. Mean effective radiation dose was calculated for each method with examination data, phantom measurements, and standard software. RESULTS: Mean total examination time was 28.0 minutes for CT fluoroscopy, 28.6 minutes for conventional CT, and 29.4 minutes for conventional fluoroscopy; mean radiologist time was 9.9 minutes, 10.5 minutes, and 9.0 minutes, respectively. These differences were not statistically significant. Mean effective radiation dose was 0.0015 mSv for conventional fluoroscopy (mean, nine sections), 0.22 mSv for CT fluoroscopy (120 kV; 50 mA; mean, 15 sections), and 0.96 mSv for conventional CT (140 kV; 240 mA; mean, six sections). Effective radiation dose can be reduced to 0.18 mSv for conventional CT by changing imaging parameters to 120 kV and 100 mA. Mean effective radiation dose of the diagnostic CT arthrographic examination (140 kV; 240 mA; mean, 25 sections) was 2.4 mSv. CONCLUSION: CT fluoroscopy and conventional CT are valuable alternative modalities for glenohumeral CT arthrography, as examination and radiologist times are not significantly different. CT guidance requires a greater radiation dose than does conventional fluoroscopy, but with adequate parameters CT guidance constitutes approximately 8% of the radiation dose.