Occlusable corneas in toadfishes: light transmission, movement and ultrastruture of pigment during light- and dark-adaptation

The toadfishes Tetractenos hamiltoni and Torquigener pleurogramma (Tetraodontidae) possess occlusable yellow corneas. We examine the light transmission and location of the yellow/orange pigment throughout the cornea, the temporal properties of pigment migration and the ultrastructure of the pigmented processes during light- and dark-adaptation. Each species was dark-adapted during the day and light-adapted during the night and then exposed to either sun illumination or darkness for different lengths of time (0-70 min). Movement of corneal pigment could be induced in both species regardless of time of day or night. The pigment was able to migrate in a dorsal or ventral direction and changed from minimal to maximal pigmentation within 60 min. Three types of transmission curves were found with varying degrees of transmission in the 400-500 nm waveband, indicating that the pigment distribution is not uniform across the cornea; some areas of the cornea transmit near UV light, while others absorb blue light. The gradual change of the transmission characteristics in different areas of the cornea indicates the presence of different concentrations of a single type of pigment. Ultrastructural examination of the corneas showed that the layer containing the pigment is situated within the scleral cornea either surrounding (T. pleurogramma) or abutting (T. hamiltoni) an iridescent layer. Long sheet-like processes or chromatophores extending centrally from dorsal and ventral reservoirs are filled with pigment during the light-adapted state but empty in the dark-adapted state.

Ocular scanning and perceptual size distortion in hemispatial neglect: effects of prism adaptation and sequential stimulus presentation

When asked to compare two lateralized shapes for horizontal size, neglect patients often indicate the left stimulus to be smaller. Gainotti and Tiacci (1971) hypothesized that this phenomenon might be related to a rightward bias in the patients' gaze. This study aimed to assess the relation between this size underestimation and oculomotor asymmetries. Eye movements were recorded while three neglect patients judged the horizontal extent of two rectangles. Two experimental manipulations were performed to increase the likelihood of symmetrical scanning of the stimulus display. The first manipulation entailed a sequential, rather than simultaneous presentation of the two rectangles. The second required adaptation to rightward displacing prisms, which is known to reduce many manifestations of neglect. All patients consistently underestimated the left rectangle, but the pattern of verbal responses and eye movements suggested different underlying causes. These include a distortion of space perception without ocular asymmetry, a failure to view the full leftward extent of the left stimulus, and a high-level response bias. Sequential presentation of the rectangles and prism adaptation reduced ocular asymmetries without affecting size underestimation. Overall, the results suggest that leftward size underestimation in neglect can arise for a number of different reasons. Incomplete leftward scanning may perhaps be sufficient to induce perceptual size distortion, but it is not a necessary prerequisite.

A yield architecture framework to explain adaptation of pearl millet to environmental stress

Functional knowledge of the physiological basis of crop adaptation to stress is a prerequisite for exploiting specific adaptation to stress environments in breeding programs. This paper presents an analysis of yield components for pearl millet, to explain the specific adaptation of local landraces to stress environments in Rajasthan, India. Six genotypes, ranging from high-tillering traditional landraces to low-tillering open-pollinated modern cultivars, were grown in 20 experiments, covering a range of nonstress and drought stress patterns. In each experiment, yield components (particle number, grain number, 100 grain mass) were measured separately for main shoots, basal tillers, and nodal tillers. Under optimum conditions, landraces had a significantly lower grain yield than the cultivars, but no significant differences were observed at yield levels around 1 ton ha(-1). This genotype x environment interaction for grain yield was due to a difference in yield strategy, where landraces aimed at minimising the risk of a crop failure under stress conditions, and modem cultivars aimed at maximising yield potential under optimum conditions. A key aspect of the adaptation of landraces was the small size of the main shoot panicle, as it minimised (1) the loss of productive tillers during stem elongation; (2) the delay in anthesis if mid-season drought occurs; and (3) the reduction in panicle productivity of the basal tillers under stress. In addition, a low investment in structural panicle weight, relative to vegetative crop growth rate, promoted the production of nodal tillers, providing a mechanism to compensate for reduced basal tiller productivity if stress occurred around anthesis. A low maximum 100 grain mass also ensured individual grain mass was little affected by environmental conditions. The strategy of the high-tillering landraces carries a yield penalty under optimum conditions, but is expected to minimise the risk of a crop failure, particularly if mid-season drought stress occurs. The yield architecture of low-tillering varieties, by contrast, will be suited to end-of-season drought stress, provided anthesis is early. Application of the above adaptation mechanisms into a breeding program could enable the identification of plant types that match the prevalent stress patterns in the target environments. (C) 2003 E.J. van Oosterom. Published by Elsevier Science B.V. All rights reserved.

Osteossarcoma de mandíbula inicialmente mimetizando lesão do periápice dental: relato de caso

O osteossarcoma é um tumor mesenquimal maligno, no qual as células cancerosas produzem matriz óssea. É o tumor maligno primário mais comum do osso, responsável por aproximadamente 20% dos sarcomas, sendo que 5% destes ocorrem nos maxilares. Possuem variados aspectos não só clínicos e histopatológicos como também no curso e prognóstico. Este artigo apresenta um relato de caso de paciente do sexo feminino, com 20 anos de idade, que nos foi encaminhada apresentando aumento de volume na região de pré-molar inferior esquerdo. Após diagnóstico clínico de lesão do periápice dental, a paciente foi submetida previamente a tratamento endodôntico do dente envolvido, a partir do qual, em um período de 11 dias, pode-se observar um considerável aumento da lesão provocando visível assimetria facial. A radiografia oclusal mostrava imagem compatível com área de destruição óssea e formação de osso anormal na região, com cortical externa exibindo evidente radiopacidade semelhante a raios de sol, sugerindo o diagnóstico de osteossarcoma. A lesão foi biopsiada e obteve-se o diagnóstico histopatológico de osteossarcoma. A paciente foi então submetida à mandibulectomia parcial e uma reconstrução da área, usando osso de costela e enxerto de pele da nádega, para o revestimento da mucosa oral envolvida. Aos 8 meses após a cirurgia houve recorrência local da lesão e a paciente foi a óbito aproximadamente 1 ano depois da recidiva.

The Brazilian Business World: the difficult adaptation to globalization

The article deals with the internationalization of Brazilian businesses in the current decade. In the 1990s, Brazil embraced economic neoliberalism and promoted a huge opening up of its economy. At that time, Brazilian companies had to adapt rapidly. Twenty years later, the country has reinforced its presence in Latin America and has ensured a better position in the global markets, especially by through agricultural exports.

An Electromagnetic Tracker System for the design of a dental superstructure

Nowadays, different techniques are available for manufacturing full-arch implant-supported prosthesis, many of them based on an impression procedure. Nevertheless, the long-term success of the prosthesis is highly influenced by the accuracy during such process, being affected by factors such as the impression material, implant position, angulation and depth. This paper investigates the feasibility of a 3D electromagnetic motion tracking system as an acquisition method for modeling such prosthesis. To this extent, we propose an implant acquisition method at the patient mouth, using a specific prototyped tool coupled with a tracker sensor, and a set of calibration procedures (for distortion correction and tool calibration), that ultimately obtains combined measurements of the implant’s position and angulation, and eliminating the use of any impression material. However, in the particular case of the evaluated tracking system, the order of magnitude of the obtained errors invalidates its use for this specific application.

Electromagnetic tracker feasibility in the design of a dental superstructure for edentulous patients

The success of the osseointegration concept and the Brånemark protocol is highly associated to the accuracy in the production of an implant-supported prosthesis. One of most critical steps for long-term success of these prosthesis is the accuracy obtained during the impression procedure, which is affected by factors such as the impression material, implant position, angulation and depth. This paper investigates the feasibility of 3D electromagnetic motion tracking systems as an acquisition method for modeling full-arch implant-supported prosthesis. To this extent, we propose an implant acquisition method at the patient mouth and a calibration procedure, based on a 3D electromagnetic tracker that obtains combined measurements of implant’s position and angulation, eliminating the use of any impression material. Three calibration algorithms (namely linear interpolation, higher-order polynomial and Hardy multiquadric) were tested to compensate for the electromagnetic tracker distortions introduced by the presence of nearby metals. Moreover, implants from different suppliers were also tested to study its impact on tracking accuracy. The calibration methodology and the algorithms employed proved to implement a suitable strategy for the evaluation of novel dental impression techniques. However, in the particular case of the evaluated electromagnetic tracking system, the order of magnitude of the obtained errors invalidates its use for the full-arch modeling of implant-supported prosthesis.

Voxel-based registration of simulated and real patient CBCT data for accurate dental implant pose estimation

The success of dental implant-supported prosthesis is directly linked to the accuracy obtained during implant’s pose estimation (position and orientation). Although traditional impression techniques and recent digital acquisition methods are acceptably accurate, a simultaneously fast, accurate and operator-independent methodology is still lacking. Hereto, an image-based framework is proposed to estimate the patient-specific implant’s pose using cone-beam computed tomography (CBCT) and prior knowledge of implanted model. The pose estimation is accomplished in a threestep approach: (1) a region-of-interest is extracted from the CBCT data using 2 operator-defined points at the implant’s main axis; (2) a simulated CBCT volume of the known implanted model is generated through Feldkamp-Davis-Kress reconstruction and coarsely aligned to the defined axis; and (3) a voxel-based rigid registration is performed to optimally align both patient and simulated CBCT data, extracting the implant’s pose from the optimal transformation. Three experiments were performed to evaluate the framework: (1) an in silico study using 48 implants distributed through 12 tridimensional synthetic mandibular models; (2) an in vitro study using an artificial mandible with 2 dental implants acquired with an i-CAT system; and (3) two clinical case studies. The results shown positional errors of 67±34μm and 108μm, and angular misfits of 0.15±0.08º and 1.4º, for experiment 1 and 2, respectively. Moreover, in experiment 3, visual assessment of clinical data results shown a coherent alignment of the reference implant. Overall, a novel image-based framework for implants’ pose estimation from CBCT data was proposed, showing accurate results in agreement with dental prosthesis modelling requirements.

Computer-aided recognition of dental implants in X-ray images

Dental implant recognition in patients without available records is a time-consuming and not straightforward task. The traditional method is a complete user-dependent process, where the expert compares a 2D X-ray image of the dental implant with a generic database. Due to the high number of implants available and the similarity between them, automatic/semi-automatic frameworks to aide implant model detection are essential. In this study, a novel computer-aided framework for dental implant recognition is suggested. The proposed method relies on image processing concepts, namely: (i) a segmentation strategy for semi-automatic implant delineation; and (ii) a machine learning approach for implant model recognition. Although the segmentation technique is the main focus of the current study, preliminary details of the machine learning approach are also reported. Two different scenarios are used to validate the framework: (1) comparison of the semi-automatic contours against implant’s manual contours of 125 X-ray images; and (2) classification of 11 known implants using a large reference database of 601 implants. Regarding experiment 1, 0.97±0.01, 2.24±0.85 pixels and 11.12±6 pixels of dice metric, mean absolute distance and Hausdorff distance were obtained, respectively. In experiment 2, 91% of the implants were successfully recognized while reducing the reference database to 5% of its original size. Overall, the segmentation technique achieved accurate implant contours. Although the preliminary classification results prove the concept of the current work, more features and an extended database should be used in a future work.

Higher education of tourism in Spain and its adaptation to the European higher education area

The international tourism system has deeply undergone structural changes in the last decades which not remain outside the subsystem higher education in tourism, especially in the European case. This article has two objectives: firstly, describes the European higher education area and the objectives, skills and subjects taught in the main Spanish universities that offer higher education in tourism. On the other hand, in the light of knowledge that researchers' descriptive models, provide experience of the implementation of European credit and thorough a deeply review of the literature on the topic higher education in tourism, to propose strategies that will enable other tourism higher education systems approach to the European reality. These policy proposals are aimed at agents and elements from higher education in tourism subsystem and they specifically include: the institutions providing education in tourism, the curriculum, the teaching methods, teachers and students.

Prevalência da cárie dental em brancos e não brancos

Foram examinadas 378 crianças de um grupo escolar da Capital do Estado de São Paulo, com a finalidade de verificar se a prevalência de cárie dental em crianças de côr branca é maior do que em crianças de côr não branca. Após a análise estatística dos dados, utilizando o teste U, de Mann-Whitney, não paramétrico, concluiu-se que os brancos apresentam uma prevalência de cárie estatìsticamente maior, nas idades de 8, 10 e 12 anos, a um nível de significância de 5%.

Fluosilicato de zinco na prevenção de cárie dental em ratos

O propósito desta pesquisa foi verificar uma possível ação sinérgica entre flúor e zinco na incidência da cárie dental. O estudo compreendeu três grupos de ratos que receberam soluções de: a) fluoreto de sódio (1 ppm) ; b) fluosilicato de zinco; c) e água, respectivamente. Todos os grupos, com ratos machos e fêmeas, eram divididos em subgrupos de acôrdo com a dieta - cariogênica e não cariogênica. Os dados obtidos foram submetidos à análise de variância, concluíndo-se o seguinte: I) O grupo que recebeu fluosilicato de zinco apresentou menor número de cáries do que o do fluoreto de sódio, mas a diferença não foi estatìsticamente significante, sendo, porém, significante entre êstes dois grupos e o da água. II) Os ratos que receberam o fluosilicato de zinco ou o fluoreto de sódio, mostraram nível mais elevado de flúor nas cinzas dos ossos, mas a diferença entre os dois grupos não foi estatìsticamente significante, III) Notou-se também que apresentavam similar desmineralização óssea.

Efeito inibidor de cárie dental de uma única aplicação tópica de solução de fluofosfato acidulada em adultos jovens: experiência de um ano

O propósito desta pesquisa foi o de verificar se as soluções de fluofosfato aciduladas, que têm efeito comprovado em crianças, teriam também em adultos jovens. O estudo compreendeu uma aplicação tópica de solução de fluofosfato acidulada, pH aproximadamente 3, e contendo 1,23% de flúor, em 75 estudante de curso superior com idade média de 20 anos, servindo eles mesmo como contrôle. Verificou-se que a diferença percentual entre o lado contrôle e o experimental, ou seja, a redução na incidência de cárie foi de 27,66%, resultado estatisticamente significante.

Gestação e cárie dental

O objetivo desta pesquisa foi o de verificar se a incidência de cárie aumenta durante a gestação. Foram incluídas neste estudo 82 gestantes e 40 não gestantes nas quais se observou a incidência de superfícies atacadas pela cárie durante um período de 6 meses. À análise dos dados constatamos que não ocorreu diferença estatìsticamente significante entre os dois grupos quanto à incidência de cárie.