1000 resultados para Curvas de luz CoroT
Resumo:
The production of visible light by chemical reactions constitutes interesting and fascinating phenomena and several reaction mechanisms are discussed to rationalize excited state formation. Most efficient chemiluminescence reactions are thought to involve one or more electron transfer steps and chemiexcitation is believed to occur by radical annihilation. A brief introduction to the general principles of light production and the main known chemiexcitation mechanisms will be given here. Subsequently, recent results on the mechanistic elucidation of efficient chemiluminescence systems, as the peroxyoxalate reaction, the induced decomposition of phenoxy-substituted 1,2-dioxetanes and the catalyzed decomposition of new a-peroxylactones will be discussed.
Resumo:
This technical note describes the construction of a low-cost optical detector. This device is composed by a high-sensitive linear light sensor (model ILX554) and a microcontroller. The performance of the detector was demonstrated by the detection of emission and Raman spectra of the several atomic systems and the results reproduce those found in the literature.
Resumo:
Positive photoresists are widely used in lithographic process in microelectronics and in optics for the fabrication of relief components. With the aim of identifying molecular modifications among positive photoresists unexposed and previously exposed to ultraviolet light the electron stimulated ion desorption technique coupled to time-of-flight mass spectrometry was employed in the study of the AZ-1518 photoresist. Mass spectra were obtained as a function of the electron beam energy, showing specific changes related to the photochemical decomposition of the photoresist. This reinforces the applicability of the technique to investigate and characterize structural changes in photosensitive materials.
Resumo:
The interest in the use of evaporative light scattering detector (ELSD) for the analysis of different classes of natural products has grown over the years. This is because this detector has become an excellent alternative compared to other types of detectors, such as the refractive index detector and the ultraviolet (UV) detector. This review describes the basic principles of ELSD functioning and discusses the advantages and disadvantages in using an ELSD for the analysis of organic compounds. Additionaly, an overview, covering the last 23 years, of ELSD applications in natural products analysis (saponins, terpenes, carbohydrates, glycosides, alkaloids, steroids, flavonoids, peptides, polyketides, coumarins and iridoids) is presented and discussed.
Resumo:
The emission of light by living organisms, bioluminescence, has been studied since the nineteenth century. However, some bioluminescent systems, such as fungi, remain poorly understood. The emitter, the two enzymes involved, and the reaction mechanism have not yet been unraveled. Moreover, the ecological role and evolutionary significance for fungal luminescence is also unknown. It is hoped that comprehensive research on fungal bioluminescent systems will generate knowledge and tools for academic and applied sciences. This review discusses the distribution of bioluminescent fungi on Earth, attempts to elucidate the mechanism involved in light emission, and presents preliminary results on the evolution and ecological role of fungal bioluminescence.
Resumo:
Multivariate Curve Resolution with Alternating Least Squares (MCR-ALS) is a resolution method that has been efficiently applied in many different fields, such as process analysis, environmental data and, more recently, hyperspectral image analysis. When applied to second order data (or to three-way data) arrays, recovery of the underlying basis vectors in both measurement orders (i.e. signal and concentration orders) from the data matrix can be achieved without ambiguities if the trilinear model constraint is considered during the ALS optimization. This work summarizes different protocols of MCR-ALS application, presenting a case study: near-infrared image spectroscopy.
Resumo:
This article presents a discussion on light diffraction by slits and grids as well as the development of an experimental apparatus which provides quantitative observation of the phenomenon. We conducted a brief historical survey on the evolution of the wave theory of light and the role of diffraction in the context of optical spectroscopy. We also reviewed the use of Huygens’ principle to calculate the intensity pattern obtained when light is diffracted by slits and compared the predictions with experimental results obtained using the apparatus developed. Finally, the use of the apparatus in an optical spectroscopy experiment was demonstrated.
Resumo:
SiO2/TiO2 nanostructured composites with three different ratios of Si:Ti were prepared using the sol-gel method. These materials were characterized using energy dispersive X-ray fluorescence, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, photoluminescence, Raman with Fourier transform infrared spectroscopy, and the specific surface area. The band gaps of materials were determined by diffuse reflectance spectra, and the values of 3.20 ± 0.01, 2.92 ± 0.02, and 2.85 ± 0.01 eV were obtained as a result of the proportional increases in the amount of Ti within the composite. The materials exhibit only the anatase (TiO2) crystalline phase and have crystalline domains ranging from 4 to 5 nm. The photodegradation process of methylene blue, royal blue GRL, and golden yellow GL dyes were studied with respect to their contact times, pH variations within the solution, and the variations in the dye concentration of the solution in response to only sunlight. The maximum amount of time for the mineralization of dyes was 90 min. The kinetics of the process follows an apparently first order model, in which the obtained rate constant values were 5.72 × 10-2 min-1 for methylene blue, 6.44 × 10-2min-1 for royal blue GRL, and 1.07 × 10-1min-1 for golden yellow.
Resumo:
In the past few years, photoredox catalysis has become a powerful tool in the field of organic synthesis. Using this efficient method, it is possible to excite organic compounds from visible light and attain alternative mechanistic pathways for the formation of chemical bonds, a result which is not obtainable by classical methods. The rapid growth of work in the area of photoredox catalysis is due to its low cost, broad chemical utility protocols, and, especially, its relevancy from the green and sustainable chemistry viewpoints. Thus, this study proposes a brief theoretical discussion of and highlights recent advances in visible-light-induced photoredox catalysis through the analysis of catalytic cycles and intermediates.
Resumo:
2015 is the Year of Light, according to UNESCO. Chemistry has a close relationship with light and one of the materials that allows such synergy is glass. Depending on the chemical composition of the glass, it is possible to achieve technological applications for the whole range of wavelengths extending from the region of the microwave to gamma rays. This diversity of applications opens a large range of research where chemistry, as a central science, overlaps the fields of physics, engineering, medicine, etc., generating a huge amount of knowledge and technological products used for humanity. This review article aimed at discussing some families of glasses, illustrating some applications. Due to the extension of the theme, and all points raised, we thought it would be good to divide the article into two parts. In the first part we focus on the properties of heavy metal oxide glasses, fluoride glasses and chalcogenide glasses. In the second part we emphasize the properties of glassy thin films prepared by sol-gel methodology and some applications, of both glasses as the films in photonics, and more attention was given to the nonlinear properties and uses of photonic fibers.
Resumo:
In this second part it will be discussed some photonic applications of glassy and glass ceramic thin films which can be used as planar waveguides. Some photonic applications require certain specifications of glass, which can be quantified by studying the nonlinear optical properties of the materials. Therefore, a brief introduction of these phenomena is discussed, as well as the use of femtosecond lasers to manipulate the composition or for the preparation of waveguides into glasses. Finally, the article will address a brief introduction on microstructured optical fibers and commercial application prospects for these devices.
Resumo:
A mancha preta dos citros (Citrus spp.), causada por Guignardia citricarpa, vem causando sérios prejuízos à citricultura paulista. O parque citrícola está alicerçado em praticamente quatro variedades de copa de laranja doce (Citrus sinensis): 'Hamlin', 'Pera', 'Valência' e 'Natal'. A literatura cita as variedades tardias ('Valência' e 'Natal') como as mais suscetíveis, em razão da elevada severidade da doença nos frutos dessas variedades por ocasião da colheita, mas não há informações sobre o progresso temporal da doença no campo. A resistência das variedades 'Hamlin' (precoce), 'Pera' (meia estação) e 'Valência' (tardia) à mancha preta dos citros foi avaliada em pomar comercial, sob infecção natural. Avaliaram-se a severidade e a incidência da doença em 100 frutos de 100 plantas de cada variedade, a cada 15 dias, desde a primeira observação dos sintomas no campo até o momento da colheita. O modelo monomolecular foi ajustado às curvas de progresso da incidência e da severidade da doença para as três variedades. As três variedades apresentaram a mesma taxa de progresso da doença (r). Concluiu-se que as variedades 'Hamlin', 'Pera' e 'Valência' possuem o mesmo nível de suscetibilidade à mancha preta dos citros.
Resumo:
A vassoura-de-bruxa tornou-se a mais importante doença do cacaueiro no Brasil desde a sua constatação no Estado da Bahia em 1989. O presente trabalho teve por objetivo estudar a curva de progresso e o gradiente da vassoura-de-bruxa, em plantio clonal, nas condições do sudeste da Bahia. O experimento foi conduzido em Uruçuca, BA, em área contendo cacaueiros enxertados com 16 genótipos diferentes e idade aproximada de três anos após a enxertia, no período de setembro de 2001 a julho de 2002. Mensalmente, foram quantificados os ramos e os frutos com sintoma da doença em três tratamentos: (1) poda fitossanitária semestral, (2) poda fitossanitária mensal e (3) poda fitossanitária mensal aliada à aplicação de fungicida mensal. O fungicida utilizado foi o óxido cuproso na dose de 3g do i.a./planta/aplicação. A fonte de inóculo utilizada foi um plantio adjacente com alta incidência da doença. Na análise temporal, foram ajustadas curvas de crescimento e calculados os coeficientes de determinação e as taxas de progresso da incidência. Houve bom ajuste dos dados de progresso da doença em vassouras vegetativas e em frutos ao modelo monomolecular. A incidência final de doença em vassouras vegetativas e em frutos no tratamento com poda fitossanitária e fungicida foi aproximadamente cinco vezes menor do que nos outros tratamentos. Na análise espacial, os resultados não evidenciaram a presença de gradiente de doença. Com base nos resultados ficou evidenciado que a integração dos métodos cultural, químico e genético resultou em menor taxa de progresso da doença e mais baixa incidência final.
Resumo:
O objetivo deste trabalho foi avaliar a influência da temperatura (5 a 45 ºC) e do regime de luz no crescimento radial do micélio, na germinação dos conídios e na esporulação (produção de cirros) de Stenocarpella macrospora e de S. maydis. Foram utilizados um isolado monospórico de cada uma das espécies de Stenocarpella obtidos na área experimental da Universidade de Passo Fundo RS, a partir de colmos de milho infectados. A faixa de temperatura entre 23 e 28 ºC proporcionou crescimento do micélio mais rápido para os dois isolados, tanto sob luz contínua como sob fotoperíodo de 12 h. Não se observou crescimento do micélio nas temperaturas de 5 a 45 ºC. Considerando o período de luz, verificou-se que o crescimento do micélio de ambas espécies foi maior no fotoperíodo de 12 h. Os conídios de S. macrospora e S. maydis não germinaram mesmo após 24 h de incubação nas temperaturas de 5 e 45 ºC, independentemente do regime de luz. As temperaturas entre 28 e 33 ºC propiciaram a maior porcentagem de germinação dos conídios de S. maydis, enquanto os conídios de S. macrospora apresentaram maior germinação na faixa de temperatura entre 26 e 29 ºC. Os conídios de ambos isolados apresentaram uma maior velocidade de germinação na presença da luz. Ambos isolados apresentaram maior esporulação em colmos de milho na faixa de temperatura entre 30 e 35 ºC e sob regime de luz contínua.
Resumo:
Quambalaria eucalypti foi recentemente relatado como agente etiológico da mancha foliar e do anelamento da haste de Eucalyptus spp., no Brasil. Em vista do pouco conhecimento disponível sobre este patossistema, procurou-se, neste trabalho, avaliar o crescimento micelial e a esporulação do fungo em diferentes meios de cultura, determinar "in vitro" a temperatura ótima para o crescimento micelial, esporulação e a germinação de conídios, avaliar a influência do regime de luz sobre a germinação de conídios e determinar a influência do binômio temperatura - tempo de câmara úmida sobre a severidade da doença. As temperaturas de 25, 13 e 37 ºC foram respectivamente, ótima, mínima e máxima, para o crescimento. A temperatura ótima para esporulação foi de 25 ºC. A interação entre meios de cultura e isolados foi significativa, sendo que os meios de batata-dextrose-ágar (BDA), V8-ágar (V8) e caldo de vegetais-ágar foram os mais favoráveis ao crescimento micelial, seguidos de caseína hidrolizada ágar e ágar água. Todavia, para a esporulação, a interação entre meios de cultura e isolados não foi significativa e o meio de BDA foi o mais favorável à esporulação do patógeno. A temperatura e o regime de luz não afetaram significativamente a germinação de conídios, com uma taxa média de 85 % de germinação. A interação entre temperatura e tempo de permanência em câmara úmida não foi significativa para severidade da doença. O modelo quadrático foi o que melhor representou a severidade em função da temperatura, com ponto ótimo estimado igual a 27 ºC. O modelo exponencial foi o que melhor representou a severidade em função do tempo de câmara úmida.