Enhancing the efficiency of freight transport by using simulation

The role of transport in the economy is twofold. As a sector of economic activity it contributes to a share of national income. On the other hand, improvements in transport infrastructure create room for accelerated economic growth. As a means to support railways as a safe and environmentally friendly transportation mode, the EU legislation has required the opening of domestic railway freight for competition from beginning of year 2007. The importance of railways as a mode of transport has been great in Finland, as a larger share of freight has been carried on rails than in Europe on average. In this thesis it is claimed that the efficiency of goods transport can be enhanced by service specific investments. Furthermore, it is stressed that simulation can and should be used to evaluate the cost-efficiency of transport systems on operational level, as well as to assess transportation infrastructure investments. In all the studied cases notable efficiency improvements were found. For example in distribution, home delivery of groceries can be almost twice as cost efficient as the current practice of visiting the store. The majority of the cases concentrated on railway freight. In timber transportation, the item with the largest annual transport volume in domestic railway freight in Finland, the transportation cost could be reduced most substantially. Also in international timber procurement, the utilization of railway wagons could be improved by combining complementary flows. The efficiency improvements also have positive environmental effects; a large part of road transit could be moved to rails annually. If impacts of freight transport are included in cost-benefit analysis of railway investments, up to 50 % increase in the net benefits of the evaluated alternatives can be experienced, avoiding a possible inbuilt bias in the assessment framework, and thus increasing the efficiency of national investments in transportation infrastructure. Transportation systems are a typical example of complex real world systems that cannot be analysed realistically by analytical methods, whereas simulation allows inclusion of dynamics and the level of detail required. Regarding simulation as a viable tool for assessing the efficiency of transportation systems finds support also in the international survey conducted for railway freight operators; operators use operations research methods widely for planning purposes, while simulation is applied only by the larger operators.

Costs and Benefits of a Shared Digital Long-Term Preservation System

Paper presented at the 40th Annual Conference of LIBER (Ligue des Bibliothèques Européennes de Recherche - Association of European Research Libraries) on July 1st, 2011; with the slides used at the presentation.

What can and should be legalized in ecological restoration?

After listing the five key elements of ecological restoration, ecology, economics, social values, cultural values, and politics, I celebrate the fact that in Brazil there is legislation on how to perform ecological restoration of degraded tropical forests, as well as an ongoing dialogue among legislators and scientists about this legislation, and also a lively debate among scientists as the best way forward, referring to articles by Brancalion et al. (2010) and Durigan et al. (2010) in this issue of Revista Árvore. Legislators elsewhere, especially megadiversity countries, should take note. I do not take sides in the debate; I think both groups of authors make very good points. Instead I call on the scientists and legislators concerned with restoration to ponder five strategic tools: A. Start with clear concepts. B. Decide where you want to go and why. C. Negotiate who should benefit & how, and who should pay, how, & why. D. Work out how an honest cost-benefit analysis of restoration would look, regardless of the biome in which you are working. Finally, figure out how to make the restoration immediately attractive for private landowners. Otherwise, they will not cooperate as fully as they could or should, and restoration efforts will not achieve its full potential.

Costs and Benefits of a Shared Digital Long-Term Preservation System

This paper describes the cost-benefit analysis of digital long-term preservation (LTP) that was carried out in the context of the Finnish National Digital Library Project (NDL) in 2010. The analysis was based on the assumption that as many as 200 archives, libraries, and museums will share an LTP system. The term ‘system’ shall be understood as encompassing not only information technology, but also human resources, organizational structures, policies and funding mechanisms. The cost analysis shows that an LTP system will incur, over the first 12 years, cumulative costs of €42 million, i.e. an average of €3.5 million per annum. Human resources and investments in information technology are the major cost factors. After the initial stages, the analysis predicts annual costs of circa €4 million. The analysis compared scenarios with and without a shared LTP system. The results indicate that a shared system will have remarkable benefits. At the development and implementation stages, a shared system shows an advantage of €30 million against the alternative scenario consisting of five independent LTP solutions. During the later stages, the advantage is estimated at €10 million per annum. The cumulative cost benefit over the first 12 years would amount to circa €100 million.

Anastomose esôfago-jejunal látero-lateral com grampeador linear cortante complementada por sutura manual

One of the most difficult procedures in digestive-tract surgery is esophago-jejunal anastomosis following total gastrectomy. Cost/benefit analysis of this procedure justifies the use of mechanical staplers, in spite of their high cost. A technical variant of the side-to-side esophago-jejunal anastomosis is presented, which incorporates the use of a cutting linear stapler. Technical maneuvers are easy to perform, the cost of the cutting linear stapler is smaller than the circular ones, the amplitude of the anastomosis is wider and the likelihood of fistulae is smaller when compared to other techniques. The side-to-side esophago-jejunal anastomosis with the cutting linear stapler is always complemented by a manual suture.

Terveyskorttiprojektin kustannusvaikuttavuuden arviointi

Tämän kandidaatintyön lähtökohtana oli selvittää Helsingin kaupungin Terveysasemaosaston Terveyskorttiprojektin aikana toteutetun pilotin taloudellisuutta ja vaikuttavuutta rinnakkaispalveluna. Kirjallisuuskatsauksen tavoitteena oli selvittää millaisilla metodeilla kustannusvaikuttavuutta voidaan analysoida terveydenhuollossa. Lisäksi tavoitteena oli selvittää kyseisen projektin kustannusten suhdetta palvelun vaikuttavuuteen, eli muutoksiin asiakkaiden terveystottumuksissa. Keskeisimpiä kustannusvaikuttavuuden arviointimenetelmiä terveydenhuollossa ovat kustannusten minimointianalyysi (KMA), kustannus-hyötyanalyysi (KHA), kustannus-vaikuttavuusanalyysi (KVA) ja kustannus-utiliteettianalyysi (KUA). Käytännön päätöksenteon analyyttinen mallintaminen empirian- ja näyttöön perustuvan tiedon pohjalta osoittautui kirjallisuuskatsauksessa myös päteväksi tavaksi arvioida palveluiden vaikuttavuutta. Terveyskorttiprojektin suurimmat kustannussäästöt, verrattuna perinteiseen vastaanotto-malliin, muodostuivat verkkopalvelun seulontavaiheessa. Terveyden edistämisen osa-alueisiin painonhallinta, liikunta ja ravitsemus palvelu soveltui hyvin. Palvelun käytettävyyden kehittämishaasteiksi muodostuivat tulosten perusteella tekniset ongelmat, vuoro-vaikutuksen puute ja asiakkaan oman motivaation löytyminen.

Salon keskusta-alueen tulvasuojelu : Tulvasuojelutoimenpiteiden mitoitus ja arviointi

Uskelanjoki virtaa Salon kaupungin läpi ja varsinkin jääpato tulvatilanteissa tulvavedenkorkeudet uhkaavat nousta maa-alueille. Tässä työssä tutkittiin valittujen tulvasuojelutoimenpiteiden vaikutuksia tulvavedenkorkeuksiin Uskelanjoessa sekä Salon kaupungin keskusta-alueella. Tavoitteena oli löytää Uskelanjoen tulvimisen ehkäisyyn kustannustehokas ratkaisu. Työssä mallinnettiin Uskelanjoen vedenkorkeuksia yksidimensionaalisesti käyttäen HEC-RAS -mallia. Mallinnus suoritettiin mitoitustulvalla tulvasuojelutoimenpiteille, jotka olivat jäidenpidätysrakennelmien rakentaminen, ruoppaus, pengerrys sekä näiden vaihtoehtojen yhdistelmät. Mallinnuksesta saatujen tulvavedenkorkeuksien avulla laadittiin tarkastellulta uomaosuudelta tulvavaarakartat sekä tulvavahinkoarviot. Näiden tietojen pohjalta voitiin vaihtoehtojen hyötyjä vertailla käyttämällä kustannus-hyötyanalyysia. Kustannus-hyötyanalyysin tuloksista havaittiin, että jäidenpidätysrakennelmat osoittautuivat parhaaksi tulvasuojeluvaihtoehdoksi Uskelanjoessa. Muutkin työssä tutkitut vaihtoehdot osoittautuivat kannattaviksi. Epävarmuuden kumuloituminen vedenkorkeuksien mallinnuksesta hyötyjen ja haittojen arviointiin luo oman epävarmuutensa tässä työssä laskettuihin arvoihin. Tätä epävarmuutta on tutkittu työssä käyttämällä herkkyysanalyysia. Herkkyysanalyysin tuloksia tarkastelemalla jäidenpidätysrakennelmien rakentaminen osoittautui kaikkein riskivapaimmaksi vaihtoehdoksi Uskelanjoen tulvasuojelussa.

Deinking sludge utilization possibilities: technical, economic, and environmental assessments

This report introduces the ENPI project called “EMIR - Exploitation of Municipal and Industrial Residues” which was executed in a co-operation between Lappeenranta University of Technology (LUT), Saint Petersburg State University of Economics (SPbSUE), Saint Petersburg State Technical University of Plant Polymers (SPbSTUPP) and industrial partners from both Leningrad Region (LR), Russia and Finland. The main targets of the research were to identify the possibilities for deinking sludge management scenarios in co-operation with partner companies, to compare the sustainability of the alternatives, and to provide recommendations for the companies in the Leningrad Region on how to best manage deinking sludge. During the literature review, 24 deinking sludge utilization possibilities were identified, the majority falling under material recovery. Furthermore, 11 potential utilizers of deinking sludge were found within the search area determined by the transportation cost. Each potential utilizer was directly contacted in order to establish cooperation for deinking sludge utilization. Finally, four companies, namely, “Finnsementti” – a cement plant in Finland (S1), “St.Gobian Weber” – a light-weight aggregate plant in Finland (S2), “LSR-Cement” – a cement plant in LR (S3), and “Rockwool” – a stone wool plant in LR (S4) were seen as the most promising partners and were included in the economic and environmental assessments. Economic assessment using cost-benefit analysis (CBA) indicated that substitution of heavy fuel oil with dry deinking sludge in S2 was the most feasible option with a benefit/cost ratio (BCR) of 3.6 when all the sludge was utilized. At the same time, the use of 15% of the total sludge amount (the amount that could potentially be treated in the scenario) resulted in a BCR of only 0.16. The use of dry deinking sludge in the production of cement (S3) is a slightly more feasible option with a BCR of 1.1. The use of sludge in stone wool production is feasible only when all the deinking sludge is used and burned in an existing incineration plant. The least economically feasible utilization possibility is the use of sludge in cement production in Finland (S1) due to the high gate fee charged. Environmental assessment was performed applying internationally recognized life cycle assessment (LCA) methodologies: ISO 14040 and ISO 14044. The results of a consequential LCA stated that only S1 and S2 lead to a reduction of all environmental impacts within the impact categories chosen compared to the baseline scenario where deinking sludge is landfilled. Considering S1, the largest reduction of 13% was achieved for the global warming potential (GWP), whereas for S2, the largest decrease of abiotic depletion potential (ADP) was by 1.7%, the eutrophication potential (EP) by 1.8%, and a GWP of 2.1% was documented. In S3, the most notable increase of ADP and acidification potential (AP) by 2.6 and 1.5% was indicated, while the GWP was reduced by 12%, the largest out of all the impact categories. In S4, ADP and AP increased by 2.3 and 2.1% respectively, whereas ODP was reduced by 25%. During LCA, it was noticed that substitution of fuels causes a greater reduction of environmental impact (S1 and S2) than substitution of raw materials (S3 and S4). Despite a number of economically and environmentally acceptable deinking sludge utilization methods being assessed in the research, evaluation of bottlenecks and communications with companies’ representatives uncovered the fact that the availability of the raw materials consumed, and the risks associated with technological problems resulting from the sludge utilization, limited the willingness of industrial partners to start deinking sludge utilization. The research results are of high value for decision-makers at already existing paper mills since the result provide insights regarding alternatives to the deinking sludge utilization possibilities already applied. Thus, the research results support the maximum economic and environmental value recovery from waste paper utilization.

Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

On Fixed-Path Rationing Methods.

Moulin (1999) characterizes the fixed-path rationing methods by efficiency, strategy-proofness, consistency, and resource-monotonicity. In this note, we give a straightforward proof of his result.

Multiple Public Goods and Lexicographic Preferences Replacement Principle.

We study the problem of locating two public goods for a group of agents with single-peaked preferences over an interval. An alternative specifies a location for each public good. In Miyagawa (1998), each agent consumes only his most preferred public good without rivalry. We extend preferences lexicographically and characterize the class of single-peaked preference rules by Pareto-optimality and replacement-domination. This result is considerably different from the corresponding characterization by Miyagawa (2001a).

Probabilistic Assignments of Identical Indivisible Objects and Uniform Probabilistic Rules.

We consider a probabilistic approach to the problem of assigning k indivisible identical objects to a set of agents with single-peaked preferences. Using the ordinal extension of preferences, we characterize the class of uniform probabilistic rules by Pareto efficiency, strategy-proofness, and no-envy. We also show that in this characterization no-envy cannot be replaced by anonymity. When agents are strictly risk averse von-Neumann-Morgenstern utility maximizers, then we reduce the problem of assigning k identical objects to a problem of allocating the amount k of an infinitely divisible commodity.

Governments and the Decentralization

The Purpose of This Article Is to Show How Costs and Benefits of Geographical Decentralization of R&D Can Be Identified and Compared. the Benefits for the Region That Receives R&D Activities Are Studied in Section 1. They Stem From the Short-Run Multiplier Effect, the Amelioration of Human Capital and the Possible Modernization of the Local Industrial Structure. on the Cost Side Examined in Section 2, the Observable Impacts of the Decentralization of R&D Concern the Loss of Returns to Scale and of the Production of the R&D Output. It Is Shown, in Section 3, That the Flows of Costs and Benefits Must Be Discounted by the Social Cost of Capital. the Main Conclusion of This Article Is That the Decentralization of R&D in a Large Sparsely Populated Country Entails Social Cost and Would Weaken Its Competitive Position in World Commerce. on the Other Hand, the Issue of Decentralization Is More Crucial for Small Countries (In Terms of Population and Economic Size) Than for Large Ones, Like the U.S., Where Critical Masses of Research Efforts Cna Be Simulataneously Attained in Many Fields and in Many Places.

Recherche économique en santé cardiovasculaire

Les nouvelles technologies médicales contribuent aux dépenses en santé qui ne cessent de croître, alors que les budgets se trouvent limités. L’évaluation économique des technologies devraient permettre d’identifier quelles sont celles qui sont les plus rentables. Malgré cela, plusieurs technologies dont le rapport coût-efficacité reste plutôt limite ou défavorable sont utilisées en médecine moderne et remboursées par notre système public de santé. Ce mémoire se concentre sur deux technologies en santé cardiovasculaire dont le rapport coût-efficacité est plutôt limite mais qui sont fréquemment utilisées au Canada; les tuteurs médicamentés ou pharmaco-actifs et les défibrillateurs cardiaques implantables (DCI). Nous avons fait une évaluation contingente de ces technologies dans le but d’examiner si ce type d’évaluation économique complémentaire pouvait procurer un point de vue nouveau sur la valeur économique et sociétaire des ces technologies. Les résultats de ces deux évaluations indiquent que les patients accordent une grande importance aux bénéfices que procurent ces deux technologies. Nos résultats soutiennent les politiques de santé actuelles de rembourser de façon libérale ces deux technologies.

A portal for the Canadian Virtual Health Library / Bibliothèque virtuelle canadienne de la santé (CVHL/BVCS): Accomplishments and possibilities, scope and structure - a review of best practices

Introduction: Coordination through CVHL/BVCS gives Canadian health libraries access to information technology they could not offer individually, thereby enhancing the library services offered to Canadian health professionals. An example is the portal being developed. Portal best practices are of increasing interest (usability.gov; Wikipedia portals; JISC subject portal project; Stanford clinical portals) but conclusive research is not yet available. This paper will identify best practices for a portal bringing together knowledge for Canadian health professionals supported through a network of libraries. Description: The portal for Canadian health professionals will include capabilities such as: • Authentication • Question referral • Specialist “branch libraries” • Integration of commercial resources, web resources and health systems data • Cross-resource search engine • Infrastructure to enable links from EHR and decision support systems • Knowledge translation tools, such as highlighting of best evidence Best practices will be determined by studying the capabilities of existing portals, including consortia/networks and individual institutions, and through a literature review. Outcomes: Best practices in portals will be reviewed. The collaboratively developed Virtual Library, currently the heart of cvhl.ca, is a unique database collecting high quality, free web documents and sites relevant to Canadian health care. The evident strengths of the Virtual Library will be discussed in light of best practices. Discussion: Identification of best practices will support cost-benefit analysis of options and provide direction for CVHL/BVCS. Open discussion with stakeholders (libraries and professionals) informed by this review will lead to adoption of the best technical solutions supporting Canadian health libraries and their users.