Técnicas de otimização não-linear aplicada a algoritmos DSM

Esta dissertação apresenta os algoritmos considerados estado-da-arte para gerenciamento dinâmico de espectro (DSM). As técnicas de otimização utilizadas nos algoritmos DSM são abordadas e brevemente discutidas para melhor entendimento, descrição e comparação dos algoritmos. A análise comparativa entre os algoritmos foi realizada considerando o ganho em taxa (kbps) obtido em simulações. Para tanto, foi realizado em laboratório um conjunto de medições de função de transferência direta e de acoplamento, posteriormente utilizadas nas simulações dos algoritmos IWF, ISB e SCALE. Os resultados obtidos nas simulações através do uso das funções de transferência medidas mostraram melhor desempenho quando comparados aos demais resultados ao considerar funções de transferência obtidas a partir do padrão 1% pior caso, resultado este reflexo da aproximação 1% em que os pares apresentam maiores níveis de crosstalk em todas as frequências da função de transferência. Dentre os algoritmos comparados, o ISB e SCALE obtiveram desempenho semelhante em canais padronizados, ficando o IWF com o desempenho próximo ao SSM. No entanto, nas simulações em cenários com canais medidos, os três algoritmos tiveram ganhos muito próximo devido ao baixo nível de crosstalk.

Análise bidimensional dos efeitos das descargas atmosféricas em cabos OPGW utilizando o método ADI-FDTD

Neste trabalho é analisado o comportamento da densidade de corrente em cabos OPGW quando submetidos a descargas atmosféricas. Para esta análise, foram aplicados dois modelos de corrente, uma vez que a descarga atmosférica tem duas componentes principais que causam mais danos aos cabos em geral: a componente impulsiva e a componente contínua. O método numérico utilizado para as simulações computacionais é o método ADI-FDTD (Diferenças Finitas no Domínio do Tempo de Direções Alternadas Implícitas), o qual é truncado pela técnica CPML (Convolutional Perfectly Matched Layers). Com base no comportamento da corrente no cabo, é feita uma avaliação para determinar qual das duas componentes de descarga atmosférica pode causar mais danos aos cabos OPGW.

Inversion method for obtaining electrical parameters for soil in the rural region in Brazil

This paper presents an inversion methodology through weighted least squares to obtain the electrical parameters for the soil of a typical mid-western region in Brazil using the model based in the formalism of the parabolic equations to calculate the electric field intensity received. To validate this methodology, the results of the radio signal measurement campaign conducted in six radial routes leaving the city of Brasilia, Federal District, where the transmitter was located, were used. The measurements were compared to computer simulations and, thus, the optimal values for the electric conductivity and relative permittivity for the soil of the region could be estimated. Finally, a quantitative analysis of these parameters was performed with the values found in the literature, which demonstrated the effectiveness of the proposed methodology.

Processos auto-organizados em agregados de larvas de moscas-varejeiras em dispersão pós-alimentar: experimentação, modelagem e validação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mecanismos de movimentação animal embasados na memória espacial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

From west to east: Environmental influences on the rate and pathways of Polynesian colonization

The prime movers behind the prehistoric colonization of Remote Oceania, and in particular the large c. 2000-year temporal gap (i.e. long pause') seen between West and East Polynesia, has long been major point of interest in the Pacific. To address these events and the processes that may have led to the known chronological disparity of these diasporas, we present results from two different, but equally powerful, analytical tools which are used to examine Polynesian seafaring capabilities and trajectories. The first is a statistical model known as Seascape, which simulates voyages, while the second uses ease of eastward travel estimates based on land distribution and wind pattern analysis. These analyses were done with the goal of determining the potential role of environmental factors in the colonization process, particularly as they relate to the long pause. We show that the eastern boundary of West Polynesia, the limit of the initial colonization pulse, is marked by a discontinuity in land distribution, where the distances travelers would have to cross in order to reach islands further to the east become significantly larger. At the same time, in West Polynesia, the frequency and intensity of winds favorable to eastward displacement decrease continuously from west to east. As far as winds are concerned, eastward travel in West Polynesia is favored in the northern and southern areas and much more difficult across the central portion. Favorable winds have a clear seasonality, and eastward displacement along the northern area is much easier under El Nino conditions. Voyaging simulations show that intentional eastward voyages departing from Tonga and Samoa, when undertaken with vessels capable of sailing efficiently against the wind, afford a viable route toward several island groups in East Polynesia, with trips starting in Samoa having a higher probability of success.

Sliding Mode Control for Active Suspension System with Data Acquisition Delay

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metodologia computacional baseada em DFT, para compreensão de processos eletródicos em fases intermetálicas ordenadas

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Photoelectron multipliers based on avalanche pn - i - pn structures

We present a new physical principle to design an optoelectronic device, which consists of a multilayered semiconductor structure, where the necessary conditions for generation of photoelectrons are met, such that it will enable sequential avalanche multiplication of electrons and holes inside two depletion slabs created around the p - n junctions of a reverse biased pn - i - pn structure. The mathematical model and computer simulations of this Semiconductor Photo-electron Multiplier (SPEM) for different semiconductor materials are presented. Its performance is evaluated and compared with that of conventional devices. The Geiger operational mode is briefly discussed which may be used in Silicon Photomultiplier (SiPM) as an elementary photo detector to enhance its performance.

Otimização do braço inferior da suspensão dianteira do veículo Baja utilizando o método dos elementos finitos

Mass reduction coupled with the mechanical performance in service has been the goal of many projects related to the transport area, considering the advantages that mass reduction can bring. However, make a simple material substitution without design a new geometry to corroborate for the best component performance, often makes the replacement unviable. In this study, it was investigated the advantages of replacing the prototype BAJA SAE front suspension lower arm of Equipe Piratas do Vale de BAJA SAE - Universidade Paulista, Campus Guaratinguetá, actually produced with steel, for a new component made of carbon fiber composite. The new geometry has been developed to provide the best possible performance for this component and your easy manufacturing. The study was done using the 3D modeling tools and computer simulations via finite element method. The first stage of this work consisted on calculation of the estimated maximum contact force tire / soil in a prototype landing after jump at one meter high, drop test in the laboratory with the current vehicle, current front suspension lower arm 3D modeling, finite element simulation and analysis of critical regions. After all current component analysis, a new geometry for the part in study was designed and simulated in order to reduce the component mass and provide a technological innovation using composite materials. With this work it was possible to obtain a theoretical component mass reduction of 25,15% maintaining the mechanical strength necessary for the appropriated component performance when incited

O efeito da autocorrelação no desempenho dos gráficos de X e R e dos gráficos de X e S²

Control charts are very important tools in statistical quality control of industrial processes and its use started last century. Since its development, the charts have always been attributed to independent processes, i.e. without any correlation between samples. But nowadays, with the high level of automation in the industrial environment, it is noticeable the autocorrelation factor between samples. The main Xcharts used in monitoring quality characteristics represented by continuous variables are the mean (X ), amplitude (R) and variance (S²). Therefore, this work aims to analyze the performance of X and R charts and in of X and S² charts with different sample sizes (4 and 5) for monitoring autocorrelated processes. Through computer simulations using the Fortran software and the use of mathematical expressions was possible to obtain data and performance analysis of the detection power charts for independent observations and for autocorrelated observations according to the model AR (1). The results show that the effect of autocorrelation reduces the ability of monitoring the control charts and that, the greater this effect, the slower the chart becomes in misfits signaling

O modelo atômico de Bohr e as abordagens para seu ensino na escola média

The teaching of modern and contemporary Physics subjects in high school is indispensable and it was already justified by several researchers. Among the subjects which must be taught, there is, for instance, Bohr atomics model. However, as it was noticed in literature review, many didactic materials do not deal with this model adequately, since that they do not take into account Bohr ideas, which involved Planck studies on black-body radiation, Einsten theory for photoelectric effect, Rutherford experiences and atomics model and the empiric results upon the spectrums of chemical elements emission. From that, it is extremely important teaching through approaches which potentialize the learning of the model proposed by Niels Bohr. On the other hand, teachers from high schools cannot have clearness about which approaches can be applied for teaching the mentioned model. Thus, it is presented some possibilities for teaching Bohr atomics model, with examples and justifications for the use of each one. Special treatment was attributed to the teaching from Science History and Philosophy, from the reading of scientific diffusion and original scientific texts, from analogies, from comic strips and from computer simulations.

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Uso de redes neurais com adaptação de pesos por modos deslizantes para controle de sistemas e aplicações em máquinas elétricas

Pós-graduação em Engenharia Elétrica - FEIS

Equação de Fokker-Planck e enovelamento de proteínas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)