Efeitos da radiação uv, temperatura e vapor aquecido nos compósitos poliméricos: monitoramento, instabilidade estrutural e fratura

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Propriedades cerâmicas e imobilização do manganês em cerâmica estrutural

In this work is the addition of a metallic ion, of the metal Manganese, in a clay of Rio Grande do Norte state for structural ceramics use, the objective this study was to assess the evolution of ceramic properties. The clay was characterized by Chemical and Thermal analysis and Xray difraction. The metallic ion was added in the clay as aqueous solutions at concentrations of 100, 150 and 200 mg / L. The molded by extrusion and the burned were temperatures at 850, 950, 1050 and 1150 º C. Was made Chemical Analysis and investigated the following parameters environmental and ceramic: Solubility, Colour, Linear Retraction (%), Water Absorption (%), Gresification Curves, Apparent Porosity (%), Apparent Specific Mass (g/cm3) and Flexion Rupture Module (kgf/cm2). The results showed that increasing the concentration of metallic ion, properties such as Apparent Porosity (%), Water Absorption (%) decreases and the Flexion Rupture Module (kgf/cm2) increases with increasing temperature independent of the concentration of the ion. The gresification curves showed that the optimum firing temperatures were in the range between 950 and 1050 ° C. The evaluation of the properties showed that the ceramic material can be studied its use in solid brick and ceramic materials with structural function of filling. The results of solubility showed that the addition of ion offers no risk to the environment

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

A complexidade do ser fictício: a construção da personagem Marcela no romance A ostra e o vento

It is possible to notice that the modern narrative increasingly seeks to invest its characters with a broad and complex nature, away from the well-defined beings of the traditional narrative. Through this work, we aim to make a study of Marcela, a character of the novel A ostra e o vento, by Moacir Costa Lopes, taking into account the way the complexity of the fictitious being is constituted through an analysis of structural, semantic, and thematic elements. We first will bring up a brief theoretical discussion about the character in a novel, and we also will carefully analyze the diagetic universe, presenting the complex path of the character further. Subsequently, we will focus on the structure of the narrative which creates a complex picture of the character, using the technique of crossed points of view as well as the technique of temporal fragmentation. Finally, we will investigate conflicting social relations that portray Marcela s disturbed inner side, as well as the metaphoric symbolic language, which furnishes a number of different representation of this character, impeding the creation of a well-structured coherent character. Studies of scholars such as Antonio Candido, Anatol Rosenfeld, Vitor Manuel de Aguiar e Silva, Fernando Segolin, Gerard Genette, Michel Zéraffa, among others, will guide our analysis

Efeito da adição de lodo de estação de tratamento de água (ETA) nas propriedades de material cerâmico estrutural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese e caracterização estrutural do niobato de potássio e estrôncio com estrutura tipo Tetragonal Tungstênio Bronze TTB

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Essa marca de suor numa canção: o processo de redução estrutural na poesia de Zila Mamede

Die Beziehung zwischen Literatur und Gesellschaft wurden, im Laufe der Jahrhunderte, aus unterschiedlichen Perspektiven analysiert. Die Wissenschaftler analysieren manchmal die Aspekten der sozialen Realität, sie betonen manchmal die Natur der literarischen Werk. Wir glauben, dass Antonio Candido einen Gleichgewichtszustand erreicht, als er das Konzept der strukturellen Reduktion oder Formalisierung entwickelt. Nämlich, der Prozess, bei dem die menschliche und soziale Leben zu einem Bestandteil der literarischen Struktur wird. Der Autor tritt eine Einbahnstraße und er kann Daten aus der sozialen Ordnung aufholen, ohne dabei die Materialität des Textes den Augen verlieren. Und das sind die theoretische Annahmen, die die Entwicklung dieser Arbeit leiten. Wir wollen zu zeigen, dass die Struktur der mamediana Lyrik aufdeckt, signifikante Daten der Gesellschaft, in der der Autore eingefügt wurde enthüllt. Folglich, wir analysieren soziale Thema, das sein Werk durchzieht. Zuerst, wir untersuchen, wie Zila Mamede den Alltag der Gesellschaft vertreten. Von der strukturellen Organisation der Gedichte, wir erkennen, das die Episode aus kleiner Städte ein Akt des Widerstands gegen die fragmentierte Profil der kapitalistischen Gesellschaf sind. Das ist, warum sie doch eng mit der Idee der Tradition erscheinen. Die dichotome Beziehung zwischen den regionalen Daten und der Element der Modernisierung etabliert, sie wird durch die Organisation des Raumes verstärkt. Während die Stadt bei konkrete gesellschaftliche Ordnung Spitzenbeträge verweist, hat die Landschaft eine harmonische und warme Form. Allgemeinen, die moderne Stadt von Zila Mamede geformt, ist eine Abbild der Industriegesellschaft. Die Bilder die Landschaft sind ein Gegenmittel gegen die Feindseligkeiten Merkmale der neuen urbanen Zustand. So, die Landschaft hat die Funktion von Umstrukturierung der Persönlichkeit des Einzelnen durch die Erfahrung der großen Städte betroffen verdinglichenden. Der Konflikt, der durch das lyrische mamediana läuft, sind Reflexionen des Prozesses der Modernisierung der Stadt Natal, ihres eigenen Landes die politische Instabilität, sie durch verschiedene staatliche Programme ging, während Der Autor seine literarische Tätigkeit verfolgt

Caracterização magnética e estrutural de filmes depositados por gaiola catódica

Iron nitrite films, with hundred of nanometers thick, were deposited using the Cathodic cage plasma nitriding method, with a N2/H2 plasma, over a common glass substract. The structure, surface morphology and magnetic properties were investigated using X-ray diffractometry (XRD), atomic force microscopy (AFM) and vibrating sample magnetometer (VSM). XRD shows the formation of γ FeN phase and a combination of ζFe2N + ɛFe3N phases. The film s saturation magnetization and coercivity depends on morphology, composition, grain size and treatment temperature. Temperature raising from 250 ºC to 350 ºC were followed by an increase in saturation magnetization and film s surface coercivity on the parallel direction in relative proportion. This fact can be attributed to the grain sizes and to the different phases formed, since iron rich fases, like the ɛFe3N phase, emerges more frequently on more elevated treatment s temperature. Using this new and reasonably low cost method, it was possible to deposit films with both good adhesion and good magnetic properties, with wide application in magnetic devices

Centros de especialidades odontológicas: avaliação da atenção de média complexidade na rede pública da Grande Natal

The Specialized Dental Care Centers (CEO) were developed to provide specialized dental care to the population, given the accumulated needs of health since the past. They must operate as units of reference for the Oral Health Team of the Primary Care, complementing the dental procedures performed at this level of attention. This study aims to assess the performance of CEOs of the Grande Natal Health Region as a strategy of Secondary Care consolidation in oral health through users, dentists and managers. For this to try to identify factors about access, hosting and satisfaction with the service, the actions developed in these centers, integration between the CEOs and the Basic Health Units (UBS), considering the reference and counter reference. Data were collected through semi-structured interview, conducted in four CEOs, among 253 users, 31 dentists and 4 managers. It was submitted to descriptive statistical analysis and to content analysis by software ALCESTE 4.5. The results revealed that the specialties of prosthesis, endodontics and surgery were the most sought by 38.2%, 23.7% and 21.7% of respondents, respectively. It was noticed that among users aged 18 to 30 years-old the greatest demand is for the specialty of endodontics (44.4%) and over 50 years for prosthesis (76.4%). There is a weakness in the reference and counter reference between UBS and CEO, because part of users goes directly to the centers without going before to the Primary Care and the majority does not want to return to the dentist of Health Unit. Satisfaction with care was reported by 90.9% of users, because they resolved the problems needed and were welcomed by the team. But the delay in care was the main factor for not satisfaction. For most dentists, some users could solve their problems completely in Primary Care, which shows the existence of unnecessary referrals to the CEOs, however they consider the existence of limiting factors in UBS that compromise the service. Most dentists revealed that some users do not get to CEOs with the basic dental treatment done, and some of them do not counter reference users. It can be concluded that the studied CEOs are being resolutive for those who access them, offering necessary care for the population, and if they don t account with this service, will encounter obstacles to resolution of problems, ranging seek care service in particular, in another public sector, or even giving up treatment. However, it is perceived the need of professionals training to understand the importance of the reference and counter reference, to that they can better serve and guide users. It is also important that cities offer better conditions to UBS and CEOs, so they can work together, with complementary actions of oral health, seeking full care, aiming for better resolution to the users' health problems

Avaliação da síntese e caracterização de zeólita ZSM-5 ausente de direcionador orgânico estrutural

The catalytic processes play a vital role in the worldwide economy, a business that handles about US$ 13 billion per year because the value of products depends on the catalytic processes, including petroleum products, chemicals, pharmaceuticals, synthetic rubbers and plastics, among others. The zeolite ZSM-5 is used as catalyst for various reactions in the area petrochemical, petroleum refining and fine chemicals, especially the reactions of cracking, isomerization, alkylation, aromatization of olefins, among others. Many researchers have studied the hydrothermal synthesis of zeolite ZSM-5 free template and they obtained satisfactory results, so this study aims to evaluate the hydrothermal synthesis and the physicochemical properties of ZSM-5 with the presence and absence of template compared with commercial ZSM-5. The methods for hydrothermal synthesis of zeolite ZSM-5 are of scientific knowledge, providing the chemical composition required for the formation of zeolitic structure in the presence and absence of template. Samples of both zeolites ZSM-5 in protonic form were obtained by heat treatment and ion exchange, according to procedures reported in the literature. The sample of commercial ZSM-5 was acquired by the company Sentex Industrial Ltda. All samples were characterized by XRD, SEM, FTIR, TG / DTG / DSC, N2 adsorption and desorption and study of acidity by thermo-desorption of probe molecule (n-butylamine), in order to understand their physicochemical properties. The efficiency of the methods applied in this work and reported in the literature has been proved by well-defined structure of ZSM-5. According as the evaluation of physicochemical properties, zeolite ZSM-5 free template becomes promising for application in the refining processes or use as catalytic support, since its synthesis reduces environmental impacts and production costs

Síntese hidrotérmica e caracterização estrutural de titanatos nanotubulares para aplicação na captura do dióxido de carbono

Nanostructured materials have been spreading successfully over past years due its size and unusual properties, resulting in an exponential growth of research activities devoted to nanoscience and nanotechnology, which has stimulated the search for different methods to control main properties of nanomaterials and make them suitable for applications with high added value. In the late 90 s an alternative and low cost method was proposed from alkaline hydrothermal synthesis of nanotubes. Based on this context, the objective of this work was to prepare different materials based on TiO2 anatase using hydrothermal synthesis method proposed by Kasuga and submit them to an acid wash treatment, in order to check the structural behavior of final samples. They were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), adsorption/desorption of N2, thermal analysis (TG/DTA) and various spectroscopic methods such as absorption spectroscopy in the infrared (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All the information of characterizations confirmed the complete conversion of anatase TiO2 in nanotubes titanates (TTNT). Observing the influence of acid washing treatment in titanates structure, it was concluded that the nanotubes are formed during heat treatment, the sample which was not subjected to this process also achieved a complete phase transformation, as showed in crystallography and morphology results, however the surface area of them practically doubled after the acid washing. By spectroscopy was performed a discussion about chemical composition of these titanates, obtaining relevant results. Finally, it was observed that the products obtained in this work are potential materials for various applications in adsorption, catalysis and photocatalysis, showing great promise in CO2 capture

Caracterização estrutural de Perovskitas Lax-1AxCoO3 (x=0 e 0,2) ,dopadas com cálcio e bario, por espectroscopia de absorção de raios X (XAS).

In this work, the structures of LaCoO3, La0,8Ba0,2CoO3 and La0,8Ca0,2CoO3 perovskites were characterized as a function of temperature (LaCoO3 structure being analyzed only at room temperature). The characterization of these materials were made by X-Ray Absorption Spectroscopy (XAS), in the cobalt K-edge, taking into account the correlated Einstein model X-ray absorption fine structure (EXAFS). The first part of the absorption spectrum corresponded the X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). These materials were prepared by the combustion method. The combustion products were calcinated at 900 0C, for 6 hours in air. Noted that the sample LaCoO3 at room temperature and samples doped with Calcium and Barium in the temperature range of 50 K to 298 K showed greater distortion to monoclinic symmetry with space group I2/a. However, the sample doped with barium at the temperatures 50 K, 220 K, and 260 K showed a slight distortion to rhombohedral symmetry with space group R-3c. The La0,8Ca0, 2CoO3 structure was few sensitive to temperature variation, showing a higher local distortion in the octahedron and a higher local thermal disorder. These interpretations were in agreement with the information electronic structural on the XANES region and geometric in the EXAFS region

Uma estratégia dirigida a modelos e baseada em linguagem de descrição arquitetural para linhas de produtos de software

Model-oriented strategies have been used to facilitate products customization in the software products lines (SPL) context and to generate the source code of these derived products through variability management. Most of these strategies use an UML (Unified Modeling Language)-based model specification. Despite its wide application, the UML-based model specification has some limitations such as the fact that it is essentially graphic, presents deficiencies regarding the precise description of the system architecture semantic representation, and generates a large model, thus hampering the visualization and comprehension of the system elements. In contrast, architecture description languages (ADLs) provide graphic and textual support for the structural representation of architectural elements, their constraints and interactions. This thesis introduces ArchSPL-MDD, a model-driven strategy in which models are specified and configured by using the LightPL-ACME ADL. Such strategy is associated to a generic process with systematic activities that enable to automatically generate customized source code from the product model. ArchSPLMDD strategy integrates aspect-oriented software development (AOSD), modeldriven development (MDD) and SPL, thus enabling the explicit modeling as well as the modularization of variabilities and crosscutting concerns. The process is instantiated by the ArchSPL-MDD tool, which supports the specification of domain models (the focus of the development) in LightPL-ACME. The ArchSPL-MDD uses the Ginga Digital TV middleware as case study. In order to evaluate the efficiency, applicability, expressiveness, and complexity of the ArchSPL-MDD strategy, a controlled experiment was carried out in order to evaluate and compare the ArchSPL-MDD tool with the GingaForAll tool, which instantiates the process that is part of the GingaForAll UML-based strategy. Both tools were used for configuring the products of Ginga SPL and generating the product source code

A saúde ambiental e os resíduos de serviços de saúde nos três níveis de complexidade do Sistema Único de Saúde - SUS

The environmental management in the health establishments is a reality still little explored in the health sector in Brazil, especially concerning its wastes. The management of wastes of health services is established in the valid legislation through the National Council of Environment and Sanitary Vigilance Agency (358/2005 and 304/2004 respectively). The present work is about a descriptive work about the environmental health in the health services. The used criterion was to diagnose the environmental management in twelve establishments of health inserted in the three levels of complexity of the Unique Health System (Sistema Ùnico de Saúde SUS). Among the sub criteria used the waste management is the one of bigger concern. The one referring to the water quality is considered good. The analysis of data reveals that 66% of the establishments got a poor environmental ranking, 17% critical and 17% appropriate, showing that the health establishments in the three levels of complexity of the SUS need urgent structural, environmental and educational interventions