Petrology and chemistry of the Chalten Plutonic Complex and implications on the magmatic and tectonic evolution of the Southernmost Andes (Patagonia) during the Miocene

Résumé Scientific:Pétrologie et Géochimie du Complexe Plutonique de Chaltén et les conséquences pour l'évolution magmatique et tectonique du Andes du Sud (Patagonia) pendant le MiocèneLe sujet de cette thèse est le Complexe Plutonique de Chaltén (CHPC), situé à la frontière entre le Chili et l'Argentine, en Patagonie (49°15'S). Ce complexe s'est mis en place au début du Miocène, dans un contexte de changements tectoniques importants. La géométrie et la vitesse de migration des plaques en Patagonie a été modifiée suite l'ouverture de la plaque Farallon il y a 25Ma (Pardo-Casas and Molnar 1987) et la subduction de la ride active du Chili sous la plaque sud-américaine il y a 14Ma (Cande and Leslie 1986). Les effets de cette reconfiguration tectonique sur la morphologie et le magmatisme de la plaque supérieure sont encore sujets à discussion. Dans ce contexte, un groupe d'intrusions miocènes - telle que le CHPC - est particulièrement intriguant, car en position transitionnelle entre le batholithe patagonien et l'arc volcanique cénozoïque et récent à l'ouest, et les laves de plateau de Patagonie à l'est (Fig. 1). A cause de leur position tectonique transitoire, ces plutons isolés hors du batholithe représentent un endroit clé pour comprendre les interactions entre la tectonique à large échelle et le magmatisme en Patagonie. Ici, je présente de nouvelles données de terrain, petrologiques, géochimiques et géochronologiques dans le but de caractériser la nature du CHPC, qui était largement inconnu avant cette étude, dans le but de tester l'hypothèse de migration de l'arc et erosion par subduction.Les résultats de l'investigation géochimique (chapitre 2) montrent que le CHPC n'est qu'un exemple parmi les plutons isolés d'arrière arc ave une composition calco-alcaline caractéristique, c-à-d une signature d'arc. La plupart de ces plutons isolés ont une composition alcaline. Le CHPC, contrairement, a une signature calco-alcaline avec Κ intermédiaire, tel que le batholithe patagonien et la plupart des roches volcaniques quaternaires liées à l'arc le long des Andes.De nouvelles données géochronologiques U-Pb de haute précision sur des zircons, acquis par TIMS, sur le CHPC donnent des âges entre 17.0 et 16.4Ma. Les âges absolus sont en accord avec la séquence intrusive déduite des relations de terrain (chapitre 1). Ces données sont les premières contraintes d'âge U-Pb sur le CHPC. Elles montrent clairement que l'histoire magmatique du CHPC n'a pas de lien direct avec la subduction de la ride à cette latitude (Cande and Leslie 1986), car le complexe est au moins 6Ma plus ancien.Une comparaison en profondeur avec les autres intrusions d'âge Miocène en Patagonie révèlent - pour la première fois - une évolution temporelle intéressante. Il y a une tendance E-W distincte au magmatisme calco-alcalin entre 20-16Ma avec une diminution de l'âge vers l'est - le CHPC est l'expression la plus orientale de cette tendance. Je suggère que la relation espace-temps reflète une migration vers l'est (vers le continent) de l'arc magmatique. Je propose que le facteur principal contrôlant cette migration est la subduction rapide suite à la reconfiguration de la vitesse des plaques tectoniques après l'ouverture la plaque Farallon (à ~26Ma) qui résulterait en une déformation importante ainsi qu'à des taux élevés d'érosion dans la fosse de subduction.Les rapports d'isotopes radiogéniques (Pb, Sr, Nd) élevés, une signature 6018 basse et un rapport Th/La élevé sont des paramètres distinctifs pour les roches mafiques du CHPC. Le modèle isotopique présenté (chapitre 2) suggère que cette signature reflète une contamination de la source, dans le coin de manteau, plutôt qu'une contamination crustale. La signature des éléments en trace du CHPC indiquent que le coin de manteau a été contaminé par des composés terrigènes, le plus vraisemblablement par des sédiments paléozoïques.Les travaux de terrain, la pétrographie et la géothermobarométrie ont été utilisés dans le but de comprendre l'histoire interne du CHPC (chapitre 3). Ces données suggèrent deux niveaux distincts de cristallisation : l'un dans la croûte moyenne (6 à 4.5kbar) et l'autre à un niveau peu profond (3.5 à 2kbar). La modélisation isotopique AFC de la contamination crustale indique des taux variables d'assimilation, qui ne sont pas corrélés avec le degré de différenciation. Cela suggère que différents volumes de magma se sont différenciés en profondeur, de façon indépendante. Cela implique que le CHPC se serait formés en plusieurs puises de magmas provenant d'au moins trois sources différentes. Les textures des granodiorites et des granites indiquent des teneurs élevées en cristaux avant la mise en place et, par conséquent, des températures d'emplacement faibles. Les observations de terrain montrent que les roches mafiques sont déformées, alors que ce n'est pas le cas pour les granodiorites et granites (plus jeunes). La déformation des roches mafiques est encore sujet de recherche, afin de savoir si elle est liée à la déformation régionale en régime compressif ou à l'emplacement lui-même. Cependant, la mise en place de grand volume de magma felsique riche en cristaux suggère un régime d'extension.Scientific Abstract:Petrology and chemistry of the Chaltén Plutonic Complex and implications on the magmatic and tectonic evolution of the Southernmost Andes (Patagonia) during the MioceneThe subject of this thesis is the Chaltén Plutonic Complex (CHPC) located at the frontier between Chile and Argentina in Patagonia (at 49° 15 'Southern latitude). This complex intruded during early Miocene in a context of major tectonics changes. The plate geometry of Patagonia has been modified by changes in the plate motions after the break up of the Farallôn plate at 25Ma (Pardo-Casas and Molnar 1987) and by the subduction of the Chile spreading Ridge beneath South-America at 14 Ma (Cande and Leslie 1986). The effects of this tectonic setting on the morphology and the magmatism of the overriding plate are a matter of on-going discussion. Particularly intriguing in this context is a group of isolated Miocene intrusions - like the CHPC - which are located in a transitional position between the Patagonian Batholith and the Cenozoic and Recent volcanic arc in the West, and the Patagonian plateau lavas in the East (Fig. 1). Due to their transient tectonic position these isolated plutons outside the batholith represent a key to understanding the interaction between global-scale tectonics and magmatism in Patagonia. Here, I present new field, penological, geochemical and geochronological data to characterize the nature of the CHPC, which was largely unknown before this study, in order to test the hypothesis of time- transgressive magmatism.The results of the geochemical investigation (Chapter 2) show that the CHPC is only one among these isolated back-arc plutons with a characteristic calc-alkaline composition, i.e. arc signature. Most of these isolated intrusives have an alkaline character. The CHPC, in contrast, has a medium Κ calc-alkaline signature, like the Patagonian batholith and most of the Quaternary arc-related volcanic rocks along the Andes.New high precision TIMS U-Pb zircon dating of the CHPC yield ages between 17.0 to 16.4 Ma. The absolute ages support the sequence of intrusion relations established in the field (Chapter 1). These data are the first U-Pb age constraints on the CHPC, and clearly show that the magmatic history of CHPC has no direct link to the subduction of the ridge, since this complex is at least 6 Ma older than the time of collision of the Chile ridge at this latitude (Cande and Leslie 1986).An in-depth comparison with other intrusion of Miocene age in Patagonia reveals - for the first time - an interesting temporal pattern. There is a distinct E-W trend of calc-alkaline magmatism between 20-16 Ma with the younging of ages in the East - the CHPC is the easternmost expression of this trend. I suggest that this time-space relation reflects an eastward (landward) migration of the magmatic arc. I propose that main factor controlling this migration is the fast rates of subduction after the major reconfigurations of the plate tectonic motions after the break up of the Farallôn Plate (at -26 ) resulting in strong deformation and high rates of subduction erosion.High radiogenic isotope ratios (Pb, Sr, Nd) ratios, low 5018 signature and high Th/La ratios in mafic rocks are distinctive features of the CHPC. The presented isotopic models (Chapter 2) suggest that this signature reflects source contamination of the mantle wedge rather than crustal contamination. The trace element signature of the CHPC indicates that the mantle wedge was contaminated with a terrigenous component, most likely from Paleozoic sediments.Fieldwork, petrography and geothermobarometry were used to further unravel the internal history of the CHPC (Chapter 3). These data suggest two main levels of crystallization: one a mid crustal levels (6 to 4.5 kbar) and other a shallow level (3.5 to 2 kbar). Isotopic AFC modeling of crustal contamination indicate variable rates of assimilation, which are not correlated with the degree of differentiation. This suggests that different batches of magma differentiate independently at depths. This implies that the CHPC would have formed by several pulses of magmas from at least 3 different sources. Textures of granodiorites and granites indicate a high content of crystals previous to the emplacement and consequently low emplacement temperatures. Field observations show that the mafic rocks are deformed, whereas the (younger) granodiorites and granites are not. It is still subject of investigation whether the deformation of the mafic rocks is related to regional deformation during a compressional regime or to the emplacement it self. However, the emplacement of huge amount of crystal rich felsic magmas suggests an extensional regime.Résumé Grand PublicPétrologie et Géochimie du Complexe Plutonique de Chaltén et les conséquences pour l'évolution magmatique et tectonique du Andes du Sud (Patagonia) pendant le MiocèneLe Complexe Plutonique de Chaltén (CHPC) est un massif montagneux situé à 49°S à la frontière entre le Chili et l'Argentine, en Patagonie (région la plus au sud de l'Amérique du Sud). Il est composé de montagnes qui peuvent atteindre plus de 3000 mètres d'altitude, telles que le Cerro Fitz Roy (3400m) et le Cerro Torre (3100m). Ces montagnes sont composées de roches plutoniques, c.-à-d. des magmas qui se sont refroidis et ont cristallisés sous la surface terrestre.La composition chimique de ces roches montre que les magmas, qui ont formé ce complexe plutonique, font partie d'un volcanisme d'arc. Celui-ci se forme lorsqu'une plaque océanique plonge sous une plaque continentale. Les géologues appellent ce processus « subduction ». Dans un tel scénario, le manteau terrestre, qui se fait prendre entre ces deux plaques, fond pour former ainsi du magma. Ce magma remonte à travers la plaque continentale vers la surface. Si celui-ci atteint la surface, il forme les roches volcaniques, comme par exemple des laves. S'il n'atteint pas la surface, le magma se refroidit pour former finalement les roches plutoniques.Le long de la marge ouest d'Amérique du Sud, la plaque Nazca - qui se situe au sud-est de la plaque océanique pacifique - passe en dessous de la plaque d'Amérique du Sud. La bordure ouest du sud de la plaque sud-américaine a également été affectée par d'autres processus tectoniques, tels que des changements dramatiques dans les déplacements de plaques (il y a 25Ma) et la collision de la ride du Chili (depuis 15 Ma jusqu'à aujourd'hui). Ces caractéristiques tectoniques et magmatiques font de cette région un haut lieu pour les géologues. La plaque Nazca, s'est formée suite à l'ouverture d'une plaque océanique plus ancienne, il y a 25Ma. Cette ouverture est liée aux vitesses de subduction les plus rapides jamais connues. La ride du Chili est l'endroit où le sol de l'Océan Pacifique s'ouvre, formant deux plaques océaniques : les plaques Nazca et Antarctique. La ride du Chili subducte sous la plaque sud-américaine depuis 15Ma, en association avec la formation de grands volumes de magma ainsi que des changements morphologiques importants. La question de savoir lequel de ces changements tectoniques globaux affecte la géologie et la géographie de Patagonie a été, et est encore, discutée pendant de nombreuses années. De nombreux chercheurs suggèrent que la plupart des caractéristiques morphologiques et magmatiques en Patagonie sont liés à la subduction de la ride du Chili, mais cette suggestion est encore débattue comme le montre notre étude.Le batholithe de Patagonie du sud (SPB) est un énorme massif composé de roches plutoniques et il s'étend tout au long de la côte ouest de Patagonie (au sud de 47°S). Ces roches correspondent certainement aux racines d'un ancien arc volcanique, qui a été soulevé et érodé. Le CHPC, ainsi que d'autres petites intrusions dans la région, se situe dans une position exotique, à 100km à l'est du SPB. Certains chercheurs suggèrent que ces intrusions pourraient être liées à la subduction de la ride du Chili.Afin de débattre de cette problématique, nous avons utilisé différentes méthodes géochronologiques pour déterminer l'âge du CHPC et le comparer (a) à l'âge des roches intrusives similaires du SPB et (b) à l'âge de la collision de la ride du Chili. Dans ce travail, nous prouvons que le CHPC s'est formé au moins 7Ma avant la collision avec la ride du Chili. Sur la base des âges du CHPC et de la composition chimique de ses roches et minéraux, nous proposons que le CHPC fait partie d'un arc volcanique ancien. La migration de l'arc volcanique plus profondément dans le continent résulte de la grande vitesse de subduction entre 25 et lOMa. Des caractéristiques évidentes pour un tel processus - telles qu'une déformation importante et une vitesse d'érosion élevée - peuvent être rencontrées tout au long de la bordure ouest de l'Amérique du sud.

Estimation of inelastic seismic material properties of a surgical sea-bed from multi-component marine seismic data

To date, state-of-the-art seismic material parameter estimates from multi-component sea-bed seismic data are based on the assumption that the sea-bed consists of a fully elastic half-space. In reality, however, the shallow sea-bed generally consists of soft, unconsolidated sediments that are characterized by strong to very strong seismic attenuation. To explore the potential implications, we apply a state-of-the-art elastic decomposition algorithm to synthetic data for a range of canonical sea-bed models consisting of a viscoelastic half-space of varying attenuation. We find that in the presence of strong seismic attenuation, as quantified by Q-values of 10 or less, significant errors arise in the conventional elastic estimation of seismic properties. Tests on synthetic data indicate that these errors can be largely avoided by accounting for the inherent attenuation of the seafloor when estimating the seismic parameters. This can be achieved by replacing the real-valued expressions for the elastic moduli in the governing equations in the parameter estimation by their complex-valued viscoelastic equivalents. The practical application of our parameter procedure yields realistic estimates of the elastic seismic material properties of the shallow sea-bed, while the corresponding Q-estimates seem to be biased towards too low values, particularly for S-waves. Given that the estimation of inelastic material parameters is notoriously difficult, particularly in the immediate vicinity of the sea-bed, this is expected to be of interest and importance for civil and ocean engineering purposes.

Alpine tectonic evolution of a Jurassic subduction-accretionary complex: Deformation, kinematics and 40Ar/39Ar age constraints on the Mesozoic low-grade schists of the Circum-Rhodope Belt in the eastern Rhodope-Thrace region, Bulgaria-Greece

Deformation of the Circum-Rhodope Belt Mesozoic (Middle Triassic to earliest Lower Cretaceous) low-grade schists underneath an arc-related ophiolitic magmatic suite and associated sedimentary successions in the eastern Rhodope-Thrace region occurred as a two-episode tectonic process: (i) Late Jurassic deformation of arc to margin units resulting from the eastern Rhodope-Evros arc-Rhodope terrane continental margin collision and accretion to that margin, and (ii) Middle Eocene deformation related to the Tertiary crustal extension and final collision resulting in the closure of the Vardar ocean south of the Rhodope terrane. The first deformational event D-1 is expressed by Late Jurassic NW-N vergent fold generations and the main and subsidiary planar-linear structures. Although overprinting, these structural elements depict uniform bulk north-directed thrust kinematics and are geometrically compatible with the increments of progressive deformation that develops in same greenschist-facies metamorphic grade. It followed the Early-Middle Jurassic magmatic evolution of the eastern Rhodope-Evros arc established on the upper plate of the southward subducting Maliac-Meliata oceanic lithosphere that established the Vardar Ocean in a supra-subduction back-arc setting. This first event resulted in the thrust-related tectonic emplacement of the Mesozoic schists in a supra-crustal level onto the Rhodope continental margin. This Late Jurassic-Early Cretaceous tectonic event related to N-vergent Balkan orogeny is well-constrained by geochronological data and traced at a regional-scale within distinct units of the Carpatho-Balkan Belt. Following subduction reversal towards the north whereby the Vardar Ocean was subducted beneath the Rhodope margin by latest Cretaceous times, the low-grade schists aquired a new position in the upper plate, and hence, the Mesozoic schists are lacking the Cretaceous S-directed tectono-metamorphic episode whose effects are widespread in the underlying high-grade basement. The subduction of the remnant Vardar Ocean located behind the colliding arc since the middle Cretaceous was responsible for its ultimate closure, Early Tertiary collision with the Pelagonian block and extension in the region caused the extensional collapse related to the second deformational event D-2. This extensional episode was experienced passively by the Mesozoic schists located in the hanging wall of the extensional detachments in Eocene times. It resulted in NE-SW oriented open folds representing corrugation antiforms of the extensional detachment surfaces, brittle faulting and burial history beneath thick Eocene sediments as indicated by 42.1-39.7 Ma Ar-40/Ar-39 mica plateau ages obtained in the study. The results provide structural constraints for the involvement components of Jurassic paleo-subduction zone in a Late Jurassic arc-continental margin collisional history that contributed to accretion-related crustal growth of the Rhodope terrane. (C) 2011 Elsevier Ltd. All rights reserved.

Source wavelet estimation for waveform inversion of crosshole georadar data

AbstractFor a wide range of environmental, hydrological, and engineering applications there is a fast growing need for high-resolution imaging. In this context, waveform tomographic imaging of crosshole georadar data is a powerful method able to provide images of pertinent electrical properties in near-surface environments with unprecedented spatial resolution. In contrast, conventional ray-based tomographic methods, which consider only a very limited part of the recorded signal (first-arrival traveltimes and maximum first-cycle amplitudes), suffer from inherent limitations in resolution and may prove to be inadequate in complex environments. For a typical crosshole georadar survey the potential improvement in resolution when using waveform-based approaches instead of ray-based approaches is in the range of one order-of- magnitude. Moreover, the spatial resolution of waveform-based inversions is comparable to that of common logging methods. While in exploration seismology waveform tomographic imaging has become well established over the past two decades, it is comparably still underdeveloped in the georadar domain despite corresponding needs. Recently, different groups have presented finite-difference time-domain waveform inversion schemes for crosshole georadar data, which are adaptations and extensions of Tarantola's seminal nonlinear generalized least-squares approach developed for the seismic case. First applications of these new crosshole georadar waveform inversion schemes on synthetic and field data have shown promising results. However, there is little known about the limits and performance of such schemes in complex environments. To this end, the general motivation of my thesis is the evaluation of the robustness and limitations of waveform inversion algorithms for crosshole georadar data in order to apply such schemes to a wide range of real world problems.One crucial issue to making applicable and effective any waveform scheme to real-world crosshole georadar problems is the accurate estimation of the source wavelet, which is unknown in reality. Waveform inversion schemes for crosshole georadar data require forward simulations of the wavefield in order to iteratively solve the inverse problem. Therefore, accurate knowledge of the source wavelet is critically important for successful application of such schemes. Relatively small differences in the estimated source wavelet shape can lead to large differences in the resulting tomograms. In the first part of my thesis, I explore the viability and robustness of a relatively simple iterative deconvolution technique that incorporates the estimation of the source wavelet into the waveform inversion procedure rather than adding additional model parameters into the inversion problem. Extensive tests indicate that this source wavelet estimation technique is simple yet effective, and is able to provide remarkably accurate and robust estimates of the source wavelet in the presence of strong heterogeneity in both the dielectric permittivity and electrical conductivity as well as significant ambient noise in the recorded data. Furthermore, our tests also indicate that the approach is insensitive to the phase characteristics of the starting wavelet, which is not the case when directly incorporating the wavelet estimation into the inverse problem.Another critical issue with crosshole georadar waveform inversion schemes which clearly needs to be investigated is the consequence of the common assumption of frequency- independent electromagnetic constitutive parameters. This is crucial since in reality, these parameters are known to be frequency-dependent and complex and thus recorded georadar data may show significant dispersive behaviour. In particular, in the presence of water, there is a wide body of evidence showing that the dielectric permittivity can be significantly frequency dependent over the GPR frequency range, due to a variety of relaxation processes. The second part of my thesis is therefore dedicated to the evaluation of the reconstruction limits of a non-dispersive crosshole georadar waveform inversion scheme in the presence of varying degrees of dielectric dispersion. I show that the inversion algorithm, combined with the iterative deconvolution-based source wavelet estimation procedure that is partially able to account for the frequency-dependent effects through an "effective" wavelet, performs remarkably well in weakly to moderately dispersive environments and has the ability to provide adequate tomographic reconstructions.

Pivotal role for a tail subunit of the RNA polymerase II mediator complex CgMed2 in azole tolerance and adherence in Candida glabrata.

Antifungal therapy failure can be associated with increased resistance to the employed antifungal agents. Candida glabrata, the second most common cause of invasive candidiasis, is intrinsically less susceptible to the azole class of antifungals and accounts for 15% of all Candida bloodstream infections. Here, we show that C. glabrata MED2 (CgMED2), which codes for a tail subunit of the RNA polymerase II Mediator complex, is required for resistance to azole antifungal drugs in C. glabrata. An inability to transcriptionally activate genes encoding a zinc finger transcriptional factor, CgPdr1, and multidrug efflux pump, CgCdr1, primarily contributes to the elevated susceptibility of the Cgmed2Δ mutant toward azole antifungals. We also report for the first time that the Cgmed2Δ mutant exhibits sensitivity to caspofungin, a constitutively activated protein kinase C-mediated cell wall integrity pathway, and elevated adherence to epithelial cells. The increased adherence of the Cgmed2Δ mutant was attributed to the elevated expression of the EPA1 and EPA7 genes. Further, our data demonstrate that CgMED2 is required for intracellular proliferation in human macrophages and modulates survival in a murine model of disseminated candidiasis. Lastly, we show an essential requirement for CgMed2, along with the Mediator middle subunit CgNut1 and the Mediator cyclin-dependent kinase/cyclin subunit CgSrb8, for the high-level fluconazole resistance conferred by the hyperactive allele of CgPdr1. Together, our findings underscore a pivotal role for CgMed2 in basal tolerance and acquired resistance to azole antifungals.

The Exotic Palaeo-Thethys Terrane in Central Iran: New geological data from Anarak, Jandaq and Posht-e-Badam areas

Résumé Le « terrane » d'Anarak-Jandak occupe une position géologique clé au nord-ouest du Microcontinent Centre-East Iranien (CE1M), connecté avec le Bloc du Grand Kavir et la ceinture métamorphique de Sanandaj-Sirjan. Nous discutons ici l'origine de ces différentes unités, reliées jusqu'à présent à des épisodes orogéniques d'âge Précambrien à Paléozoïque inférieur, pour conclure finalement de leur affinité paléotéthysienne. Leur histoire commence par un épisode de rifting d'âge Ordovicien supérieur-Dévonien inférieur, pour se terminer au Trias par la collision des blocs Cimmériens dérivé du Gondwana avec le Bloc du Turan d'affinité asiatique (événement Eocimmérien). La plus importante unité métamorphique affleurant au sud-ouest de la région de Jandak-Anarak-Kaboudan est une épaisse séquence silicoclastique à grains fins contenant des blocs ophiolitiques (marginal-sea-type), et des associations basalte-gabbro à signatures géochimiques de type supra-subduction. Dans la région de Nakhlak, nous avons daté ces gabbros par la méthode U-Pb à 387f0.11 Ma ; les roches métamorphiques pélitiques ont donné des âges de refroidissement Ar-Ar pour la muscovite de 320 à 333 Ma. Ce complexe d'accrétion "varisque" a été métamorphisé dans le faciès schiste vert-amphibolite au cours de l'accrétion de la ceinture granitique d'Airekan, d'âge Cambrien inférieur (549±15 Ma par la méthode U/Pb), qui affleure aujourd'hui à l'extrémité nord-ouest du terrane d'Anarak-Jandak . La subduction vers le nord de l'océan Paléotéthys depuis le Paléazoïque supérieur jusqu'au Trias, a permis l'accumulation de grandes quantités de matériel océanique dans la zone de subduction. Par exemple, une succession de guyots (Anarak, Kaboudan, et Meraji Seamounts) et de hauts sous-marins, entrés en collision oblique avec le prisme d'accrétion, est à l'origine d'un léger métamorphisme de type HP qui affecte ces séries {âges Ar-Ar de 280 à 230 Ma). De plus, le magmatisme bimodal de Chah Gorbeh est caractérisé d'une part par des roches de type trondjémite-gabbros (262 Ma), d'autre part par des laves en coussin de type basaltes alcalins-rhyolites; ces roches magmatiques ont recoupé l'ophiolite d'Anarak lors de la mise en place de cette dernière dans la fosse interne de subduction. Quant au prisme d'accrétion de Doshakh, d'âge essentiellement Permien supérieur, i1 a été accrété le long de la marge continentale et métamorphisé dans le faciès schiste vert. La fermeture de la Paléotéthys s'enregistre finalement par la sédimentation dans le bassin d'avant pays du flysch de Bayazeh, d'âge probable Triasique. Le matériel issu de l'arc magmatique de la Paléotéthys est très bien préservé dans les dépôts infra-arc Dévonien supérieur-Carbonifère de Godar-e-Siah, ainsi que dans la succession d'avant-arc de Nakhlak. Pendant l'intervalle Paléozoïque supérieur-Trias, la région de Jandak a été soumise à un régime extensif de type bassin d'arrière-arc, dont un témoin pourrait être la ceinture ophiolitique d'Arusan, elle-même comparable aux écailles ophiolitiques d'Aghdarband au nord-est de l'Iran. Cet ensemble métamorphique est recoupé par des granites d'arc à collisionnel datés à 215±15 Ma. Dans la région de Yazd, témoin de la marge passive Cimmérienne, la sédimentation syn-rift Silurienne à Dévonienne inférieure a été interrompue pendant l'intervalle Trias moyen-Trias supérieur; il en a été de même pour les dépôts de plate-forme Paléozoïque supérieur. L'érosion, qui dans ce dernier cas a atteint le Permien, pourrait être liée au bombement flexural de la marge passive. La collision finale n'a pas induit de déformations trop importantes, et se caractérise par la mise en place de nappes sur la marge passive. Cet événement est scellé par des dépôts molassique du Lias. D'un point de vue régional, la zone s'étendant actuellement de la Mer Noire au Pamir a été soumise à six épisodes d'extension-compression du Jurassique inférieur (début du l'ouverture en position arrière-arc de la Néotéthys) à l'Eocène moyen. Par exemple, le terrane d'AnarakJandak, probablement situé entre le Kopeh Dagh et la plate-forme nord Afghane, s'est complètement détaché de sa patrie d'origine au début du Crétacé supérieur. Des preuves de cet événement se retrouvent dans les séries de plate-forme de Khur (préservation de séries syn-rift puis de marge passive). Les ophiolites de Nain et de Sabzevar sont de plus interprétée comme un témoin de l'existence de ce bassin d'arrière-arc. Dans l'intervalle Eocène-Oligocène, l'indentation par la plaque indienne de l'Eurasie a été contemporaine de la rotation horaire de fragments de l'ancien microcontinent Iranien et de la formation du CEIM. Cette rotation est responsable du transport du terrane d'Anarak-Jandak vers sa position actuelle en Iran Central, et de la dislocation de Terranes de moindre importance, comme le bloc de Posht-e Badam. Depuis le Miocène supérieur, et à la suite de la collision entre l'Arabie et l'Iran, le ternane d'Anarak-Jandak a subi des déformations liées à l'activité d'une zone de cisaillement dextre parallèle à la suture du Zagros, à l'arrière de l'arc magmatique d'Uromieh-Dokhtar. Résumé large public Le Microcontinent Centre-Est Iranien occupe une position géologique clé au centre de l'Iran. Les différentes unités qui le composent, reliées jusqu'à présent à des épisodes orogéniques d'âge Précambrien à Paléozoïque inférieur, sont maintenant rajeunies et liés à la fermeture de l'océean Paléotéthys. Leur histoire commence par un épisode de rifting d'âge Ordovicien supérieur à Dévonien inférieur, pour se terminer au Trias par la collision des- blocs Cimmériens, dérivés du Gondwana, avec le Bloc du Turan d'affinité asiatique. Dans la marge active asiatique de la Paléotéthys, nous avons daté les restes d'un océan marginal à 387±0.11 Ma. Ce complexe d'accrétion a été métamorphisé au cours de la réaccrétion de la ceinture granitique d'Airekan, d'âge Cambrien inférieur (549±15 Ma), qui affleure aujourd'hui à l'extrémité nord-ouest du « terrane » d'Anarak-Jandak correspondant à la plus grande partie de la région étudiée. Le matériel issu de l'arc magmatique de la Paléotéthys est très bien préservé et daté du Dévonien supérieur-Carbonifère. Pendant l'intervalle Paléozoïque supérieur-Trias, la région a été soumise à un régime extensif de type bassin d'arrière-arc, dont un témoin pourrait être la ceinture ophiolitique d'Arusan, comparable aux écailles ophiolitiques d'Aghdarband au nord-est de l'Iran. Cet ensemble métamorphique est recoupé par des granites datés à 215±15 Ma. La subduction vers le nord de l'océan Paléotéthys depuis le Paléozoïque supérieur jusqu'au Trias, a permis l'accumulation de grandes quantités de matériel océanique dans la zone de subduction. Par exemple, une succession de volcans sous-marins, entrés en collision avec le prisme d'accrétion, est à l'origine d'un léger métamorphisme de type HP qui affecte ces séries (280 à 230 Ma). Quant au prisme d'accrétion de Doshakh, d'âge essentiellement Permien supérieur, il a été mis en place le long de la marge continentale et métamorphisé dans le faciès schiste vert. La fermeture de la Paléotéthys s'enregistre finalement par la sédimentation dans le bassin d'avant pays du flysch de Bayazeh, d'âge Triasique. Dans la région de Yazd, on trouve les témoins de la marge passive Cimmérienne, la sédimentation syn-rift Silurienne à Dévonienne inférieure a été interrompue pendant l'intervalle Trias moyen-Trias supérieur, marqué par la flexuration de la marge passive lorsqu'elle rentra en collision avec la marge active asiatique. Cet événement est scellé par des dépôts molassique à charbon du Lias. Le «terrane» d'Anarak-Jandak, probablement situé à l'origine entre le Kopeh Dagh et la plate-forme nord Afghane, s'est complètement détaché de cette région au début du Crétacé supérieur lors de l'ouverture d'un bassin d'arrière-arc, engendré, cette fois, par la subduction de l'océan Néotéthys situé au sud des blocs cimmériens. Des preuves de cet événement se retrouvent dans les séries syn-rift, puis de marge passive de Khour. Les ophiolites de Nain et de Sabzevar sont interprétées comme un témoin de l'existence de ce bassin d'arrière-arc. Dans l'intervalle Eocène-Oligocène, l'indentation de l'Eurasie par la plaque indienne a été contemporaine de la rotation horaire de fragments de l'ancien microcontinent centre-Iranien. Cette rotation de près de 90° est responsable du transport du « terrane » d'Anarak-Jandak vers sa position actuelle. Abstract The Anarak-Jandaq terrane occupies a strategic geological situation at the north-western part of the Central-East Iranian Microcontinent (CEIM) and in connection with the Great Kavir Block and Sanandaj-Sirjan metamorphic belt. Our recent findings redefine the origin of these mentioned areas so far attributed to the Precambrian-Early Palaeozoic orogenic episodes, to be now directly related to the tectonic evolution of the Palaeo-Tethys Ocean, commenced by Late Ordovician-Early Devonian rifting events and terminated in the Triassic by the Eocimmerian tectonic event due to the collision of the Cimmerian blocks with the Asiatic Turan block. The most distributed metamorphic unit that is exposed from the south-west of Jandaq to the Anarak and Kaboudan areas is a thick and fine grain siliciclastic sequence accompanied by marginal-sea-basin ophiolitic blocks including basalt-gabbro association with supra-subduction-geochemical signature. These gabbros in the Nakhlak area were dated by U/Pb method at 387.6 ± 0.11 Ma and the metamorphic pelitic rocks yielded a range of 320 to 333 Ma muscovite-cooling ages based on 40Ar/39 Ar method. This "Variscan" accretionary complex was metamorphosed in greenschist-amphibolite facies during accretion to the Lower Cambrian Airekan granitic belt (549 ± 15 Ma by U/Pb method) that crops out at the northwestern edge of the Anarak-Jandaq terrane. Continued northward subduction of the Palaeo-Tethys Ocean during the entire Late Palaeozoic-Middle Triassic brought huge amount of oceanic material to the subduction zone. One chain of Carboniferous-Triassic oceanic rises and seamounts (the Anarak, Kaboudan, and Meraji Seamounts) obliquely collided with the accretionary wedge and created a mild HP metamorphic event (280-230 Ma based on 40Ar/39Ar results). Bimodal magmatism of the Chah Gorbeh area is characterized by a 262 Ma trondjemite-gabbro as well as pillow alkalibasalts-rhyolites which intruded the Anarak ophiolite when it was being emplaced within the inner-wall trench. The mainly Late Permian-Triassic Doshakh wedge was accreted along the continent and metamorphosed under lower greenschist facies and the probable Triassic Bayazeh flysch filled the foreland basin during the final closure. The Palaeo-Tethys magmatic arc products have been well preserved in the Late Devonian-Carboniferous Godar-e-Siah intra-arc deposits and the Triassic Nakhlak fore-arc succession. During the Late Palaeozoic-Triassic times, the Jandaq area has been affected by back-arc extension and probably the Arusan ophiolitic belt is the remnant of this narrow basin comparable to the Aqdarband ophiolitic remnant in north-east Iran. This metamorphic belt was intruded by 215 ± 15 Ma arc to collisional granites. In the passive margin of the Cimmerian block, on the Yazd region, the Silurian-Early Devonian syn-rift succession as well as the nearly continuous Upper Palaeozoic platform-type deposition was interrupted during the Middle to Late Triassic time, local erosion down to Devonian levels may be related to flexural bulge erosion. The collision event was not so strong to generate intensive deformation but was accompanied by some nappe thrusting onto the passive margin. It is finally unconformably covered by Liassic continental molassic deposits. Related to the onset of Neo-Tethyan back-arc opening in Early Jurassic to Mid-Eocene times, six periods of extensional-compressional events have differently influenced an elongated area, extending from the West Black Sea to Pamir. The Anarak-Jandaq terrane which was situated somewhere in this affected area, probably between the Kopeh Dagh and North Afghan platform, was completely detached from its source at the beginning of the Late Cretaceous

Error and attack tolerance of layered complex networks.

Many complex systems may be described by not one but a number of complex networks mapped on each other in a multi-layer structure. Because of the interactions and dependencies between these layers, the state of a single layer does not necessarily reflect well the state of the entire system. In this paper we study the robustness of five examples of two-layer complex systems: three real-life data sets in the fields of communication (the Internet), transportation (the European railway system), and biology (the human brain), and two models based on random graphs. In order to cover the whole range of features specific to these systems, we focus on two extreme policies of system's response to failures, no rerouting and full rerouting. Our main finding is that multi-layer systems are much more vulnerable to errors and intentional attacks than they appear from a single layer perspective.

GeoKernels: Modeling of Spatial Data on GeoManifolds

This paper presents a review of methodology for semi-supervised modeling with kernel methods, when the manifold assumption is guaranteed to be satisfied. It concerns environmental data modeling on natural manifolds, such as complex topographies of the mountainous regions, where environmental processes are highly influenced by the relief. These relations, possibly regionalized and nonlinear, can be modeled from data with machine learning using the digital elevation models in semi-supervised kernel methods. The range of the tools and methodological issues discussed in the study includes feature selection and semisupervised Support Vector algorithms. The real case study devoted to data-driven modeling of meteorological fields illustrates the discussed approach.

Nd-, O-, and H-isotopic evidence for complex, closed-system fluid evolution of the peralkaline Ilimaussaq intrusion, South Greenland

Relatively homogeneous oxygen isotope compositions of amphibole, clinopyroxene, and olivine separates (+5.2 to +5.7parts per thousand relative to VSMOW) and neodymium isotope compositions (epsilon(Nd(T)) = -0.9 to -1.8 for primary magmatic minerals and epsilon(Nd(T)) = -0.1 and -0.5 for mineral separates from late-stage pegmatites and hydrothermal veins) from the alkaline to agpaitic llimaussaq intrusion, South Greenland, indicate a closed system evolution of this igneous complex and support a mantle derivation of the magma. In contrast to the homogeneous oxygen and neodymium isotopic data, deltaD values for hand-picked amphibole separates vary between -92 and -232parts per thousand and are among the most deuterium-depleted values known from igneous amphiboles. The calculated fluid phase coexisting with these amphiboles has a homogeneous oxygen isotopic composition within the normal range of magmatic waters, but extremely heterogeneous and low D/H ratios, implying a decoupling of the oxygen- and hydrogen isotope systems. Of the several possibilities that can account for such unusually low deltaD values in amphiboles (e.g., late-stage hydrothermal exchange with meteoric water, extensive magmatic degassing, contamination with organic matter, and/or effects of Fe-content and pressure on amphibole-water fractionation) the most likely explanation for the range in deltaD values is that the amphiboles have been influenced by secondary interaction and reequilibration with D-depleted fluids obtained through late-magmatic oxidation of internally generated CH(4) and/or H(2). This interpretation is consistent with the known occurrence of abundant magmatic CH(4) in the Ilimaussaq rocks and with previous studies on the isotopic compositions of the rocks and fluids. Copyright (C) 2004 Elsevier Ltd.

Modeling of the TCR-MHC-peptide complex.

The methodology for generating a homology model of the T1 TCR-PbCS-K(d) class I major histocompatibility complex (MHC) class I complex is presented. The resulting model provides a qualitative explanation of the effect of over 50 different mutations in the region of the complementarity determining region (CDR) loops of the T cell receptor (TCR), the peptide and the MHC's alpha(1)/alpha(2) helices. The peptide is modified by an azido benzoic acid photoreactive group, which is part of the epitope recognized by the TCR. The construction of the model makes use of closely related homologs (the A6 TCR-Tax-HLA A2 complex, the 2C TCR, the 14.3.d TCR Vbeta chain, the 1934.4 TCR Valpha chain, and the H-2 K(b)-ovalbumine peptide), ab initio sampling of CDR loops conformations and experimental data to select from the set of possibilities. The model shows a complex arrangement of the CDR3alpha, CDR1beta, CDR2beta and CDR3beta loops that leads to the highly specific recognition of the photoreactive group. The protocol can be applied systematically to a series of related sequences, permitting the analysis at the structural level of the large TCR repertoire specific for a given peptide-MHC complex.

Purification and ligand binding of a soluble class I major histocompatibility complex molecule consisting of the first three domains of H-2Kd fused to beta 2-microglobulin expressed in the baculovirus-insect cell system.

A recombinant baculovirus encoding a single-chain murine major histocompatibility complex class I molecule in which the first three domains of H-2Kd are fused to beta 2-microglobulin (beta 2-m) via a 15-amino acid linker has been isolated and used to infect lepidopteran cells. A soluble, 391-amino acid single-chain H-2Kd (SC-Kd) molecule of 48 kDa was synthesized and glycosylated in insect cells and could be purified in the absence of detergents by affinity chromatography using the anti-H-2Kd monoclonal antibody SF1.1.1.1. We tested the ability of SC-Kd to bind antigenic peptides using a direct binding assay based on photoaffinity labeling. The photoreactive derivative was prepared from the H-2Kd-restricted Plasmodium berghei circumsporozoite protein (P.b. CS) peptide 253-260 (YIPSAEKI), a probe that we had previously shown to be unable to bind to the H-2Kd heavy chain in infected cells in the absence of co-expressed beta 2-microglobulin. SC-Kd expressed in insect cells did not require additional mouse beta 2-m to bind the photoprobe, indicating that the covalently attached beta 2-m could substitute for the free molecule. Similarly, binding of the P.b. CS photoaffinity probe to the purified SC-Kd molecule was unaffected by the addition of exogenous beta 2-m. This is in contrast to H-2KdQ10, a soluble H-2Kd molecule in which beta 2-m is noncovalently bound to the soluble heavy chain, whose ability to bind the photoaffinity probe is greatly enhanced in the presence of an excess of exogenous beta 2-m. The binding of the probe to SC-Kd was allele-specific, since labeling was selectively inhibited only by antigenic peptides known to be presented by the H-2Kd molecule.

Transition probabilities and duration analysis among disability states: Some evidence from Spanish data

In this paper we study the disability transition probabilities (as well as the mortalityprobabilities) due to concurrent factors to age such as income, gender and education. Althoughit is well known that ageing and socioeconomic status influence the probability ofcausing functional disorders, surprisingly little attention has been paid to the combined effectof those factors along the individuals' life and how this affects the transition from one degreeof disability to another. The assumption that tomorrow's disability state is only a functionof the today's state is very strong, since disability is a complex variable that depends onseveral other elements than time. This paper contributes into the field in two ways: (1) byattending the distinction between the initial disability level and the process that leads tohis course (2) by addressing whether and how education, age and income differentially affectthe disability transitions. Using a Markov chain discrete model and a survival analysis, weestimate the probability by year and individual characteristics that changes the state of disabilityand the duration that it takes its progression in each case. We find that people withan initial state of disability have a higher propensity to change and take less time to transitfrom different stages. Men do that more frequently than women. Education and incomehave negative effects on transition. Moreover, we consider the disability benefits associatedto those changes along different stages of disability and therefore we offer some clues onthe potential savings of preventive actions that may delay or avoid those transitions. Onpure cost considerations, preventive programs for improvement show higher benefits thanthose for preventing deterioration, and in general terms, those focussing individuals below65 should go first. Finally the trend of disability in Spain seems not to change among yearsand regional differences are not found.

Current approaches and challenges for the metabolite profiling of complex natural extracts.

Metabolite profiling is critical in many aspects of the life sciences, particularly natural product research. Obtaining precise information on the chemical composition of complex natural extracts (metabolomes) that are primarily obtained from plants or microorganisms is a challenging task that requires sophisticated, advanced analytical methods. In this respect, significant advances in hyphenated chromatographic techniques (LC-MS, GC-MS and LC-NMR in particular), as well as data mining and processing methods, have occurred over the last decade. Together, these tools, in combination with bioassay profiling methods, serve an important role in metabolomics for the purposes of both peak annotation and dereplication in natural product research. In this review, a survey of the techniques that are used for generic and comprehensive profiling of secondary metabolites in natural extracts is provided. The various approaches (chromatographic methods: LC-MS, GC-MS, and LC-NMR and direct spectroscopic methods: NMR and DIMS) are discussed with respect to their resolution and sensitivity for extract profiling. In addition the structural information that can be generated through these techniques or in combination, is compared in relation to the identification of metabolites in complex mixtures. Analytical strategies with applications to natural extracts and novel methods that have strong potential, regardless of how often they are used, are discussed with respect to their potential applications and future trends.

The magmatic to hydrothermal evolution of the intrusive Mont Saint-Hilaire Complex: Insights into the late-stage evolution of peralkaline rocks

The Cretaceous Mont Saint-Hilaire complex (Quebec, Canada) comprises three major rock units that were emplaced in the following sequence: (I) gabbros; (II) diorites; (III) diverse partly agpaitic foid syenites. The major element compositions of the rock-forming minerals, age-corrected Nd and oxygen isotope data for mineral separates and trace element data of Fe-Mg silicates from the various lithologies imply a common source for all units. The distribution of the rare earth elements in clinopyroxene from the gabbros indicates an ocean island basalt type composition for the parental magma. Gabbros record temperatures of 1200 to 800 degrees C, variable silica activities between 0 center dot 7 and 0 center dot 3, and f(O2) values between -0 center dot 5 and +0 center dot 7 (log delta FMQ, where FMQ is fayalite-magnetite-quartz). The diorites crystallized under uniform a(SiO2) (a(SiO2) = 0 center dot 4-0 center dot 5) and more reduced f(O2) conditions (log delta FMQ similar to-1) between similar to 1100 and similar to 800 degrees C. Phase equilibria in various foid syenites indicate that silica activities decrease from 0 center dot 6-0 center dot 3 at similar to 1000 degrees C to < 0 center dot 3 at similar to 550 degrees C. Release of an aqueous fluid during the transition to the hydrothermal stage caused a(SiO2) to drop to very low values, which results from reduced SiO(2) solubilities in aqueous fluids compared with silicate melts. During the hydrothermal stage, high water activities stabilized zeolite-group minerals. Fluid inclusions record a complex post-magmatic history, which includes trapping of an aqueous fluid that unmixed from the restitic foid syenitic magma. Cogenetic aqueous and carbonic fluid inclusions reflect heterogeneous trapping of coexisting immiscible external fluids in the latest evolutionary stage. The O and C isotope characteristics of fluid-inclusion hosted CO(2) and late-stage carbonates imply that the surrounding limestones were the source of the external fluids. The mineral-rich syenitic rocks at Mont Saint-Hilaire evolved as follows: first, alkalis, high field strength and large ion lithophile elements were pre-enriched in the (late) magmatic and subsequent hydrothermal stages; second, percolation of external fluids in equilibrium with the carbonate host-rocks and mixing processes with internal fluids as well as fluid-rock interaction governed dissolution of pre-existing minerals, element transport and precipitation of mineral assemblages determined by locally variable parameters. It is this hydrothermal interplay between internal and external fluids that is responsible for the mineral wealth found at Mont Saint-Hilaire.

The Anarak, Jandaq and Posht-e-Badam metamorphic complexes in central Iran: New geological data, relationships and tectonic implications

The Anarak, Jandaq and Posht-e-Badam metamorphic complexes occupy the NW part of the Central-East Iranian Microcontinent and are juxtaposed with the Great Kavir block and Sanandaj-Sirjan zone. Our recent findings redefine the origin of these complexes, so far attributed to the Precambrian-Early Paleozoic orogenic episodes, and now directly related to the tectonic evolution of the Paleo-Tethys Ocean. This tectonic evolution was initiated by Late Ordovician-Early Devonian rifting events and terminated in the Triassic by the Eocimmerian collision event due to the docking of the Cimmerian blocks with the Asiatic Turan block. The ``Variscan accretionary complex'' is a new name we proposed for the most widely distributed metamorphic rocks connected to the Anarak and Jandaq complexes. This accretionary complex exposed from SW of Jandaq to the Anarak and Kabudan areas is a thick and fine grain siliciclastic sequence accompanied by marginal-sea ophiolitic remnants, including gabbro-basalts with a supra-subduction-geochemical signature. New Ar-40/Ar-39 ages are obtained as 333-320 Ma for the metamorphism of this sequence under greenschist to amphibolite facies. Moreover, the limy intercalations in the volcano-sedimentary part of this complex in Godar-e-Siah yielded Upper Devonian-Tournaisian conodonts. The northeastern part of this complex in the Jandaq area was intruded by 215 +/- 15 Ma arc to collisional granite and pegmatites dated by ID-TIMS and its metamorphic rocks are characterized by Some Ar-40/Ar-39 radiometric ages of 163-156 Ma. The ``Variscan'' accretionary complex was northwardly accreted to the Airekan granitic terrane dated at 549 +/- 15 Ma. Later, from the Late Carboniferous to Triassic, huge amounts of oceanic material were accreted to its southern side and penetrated by several seamounts such as the Anarak and Kabudan. This new period of accretion is supported by the 280-230 Ma Ar-40/Ar-39 ages for the Anarak mild high-pressure metamorphic rocks and a 262 Ma U-Pb age for the trondhjemite-rhyolite association of that area. The Triassic Bayazeh flysch filled the foreland basin during the final closure of the Paleo-Tethys Ocean and was partly deposited and/or thrusted onto the Cimmerian Yazd block. The Paleo-Tethys magmatic arc products have been well-preserved in the Late Devonian-Carboniferous Godar-e-Siah intra-arc deposits and the Triassic Nakhlak fore-arc succession. On the passive margin of the Cimmerian block, in the Yazd region, the nearly continuous Upper Paleozoic platform-type deposition was totally interrupted during the Middle to Late Triassic. Local erosion, down to Lower Paleozoic levels, may be related to flexural bulge erosion. The platform was finally unconformably covered by Liassic continental molassic deposits of the Shemshak. One of the extensional periods related to Neo-Tethyan back-arc rifting in Late Cretaceous time finally separated parts of the Eocimmerian collisional domain from the Eurasian Turan domain. The opening and closing of this new ocean, characterized by the Nain and Sabzevar ophiolitic melanges, finally transported the Anarak-Jandaq composite terrane to Central Iran, accompanied by large scale rotation of the Central-East Iranian Microcontinent (CEIM). Due to many similarities between the Posht-e-Badam metamorphic complex and the Anarak-Jandaq composite terrane, the former could be part of the latter, if it was transported further south during Tertiary time. (C) 2007 Elsevier B.V. All rights reserved.