Total intravenous anaesthesia with propofol-racemic ketamine and propofol-S-ketamine: a comparative study and haemodynamic evaluation in dogs undergoing ovariohysterectomy

Total intravenous anaesthesia (TIVA) with propofol and ketamine proved to be very satisfactory from a clinical point of view. This blind randomised controlled trial was designed to compare induction and maintenance of anaesthesia under continuous infusion of propofol-racemic ketamine (PRK) with that of propofol-S-ketamine (PSK) and evaluate their haemodynamic, metabolic and ventilatory effects. Seven female dogs undergoing ovariohysterectomy were involved in each group. Anaesthesia was induced: in Group PRK, with propofol (4.0mg kg-1) and racemic ketamine (2.0mg kg-1) intravenous (i.v.), followed by i.v. infusion of propofol (initial dose of 0.5mg kg-1 min-1) and racemic ketamine (0.2mg kg-1 min-1); in Group PSK, with propofol (4.0mg kg-1) and S-ketamine (1.0 mg kg¹) i.v., followed by i.v. infusion of propofol (initial dose of 0.5mg kg-1 min-1) and S-ketamine (0.1mg kg-1 min-1). Parameters were assessed before anaesthesia and in 6 time points after induction. In both groups, heart rate increased significantly at all time points. There was a slight decrease in systemic blood pressure, cardiac output and cardiac index in both groups. The systolic index decrease significantly and intense respiratory depression was observed in all groups, making assisted ventilation necessary.

Best Practices of International Double Master's Degree Programmes: Comparative Study on Finnish and Russian Universities

The purpose of this report is to disseminate the best practices of double degree programmes’ organization, implementation and development between Russian and European universities. The findings reveal good developments in the field of double degree cooperation between Russian and European universities and a high motivation from both parties. The report depicts different models of building a joint curriculum and organizing academic mobility. Foreign language skills improvement for students and university staff, involvement of international companies, and joint strategy and actions in marketing and quality assurance are some redevelopments points recommended in the report.

A comparative study of eleven protein systems in tamarins, genus Saguinus (Platyrrhini, Callitrichinae)

The genetic variability of six tamarin taxa, genus Saguinus, was analyzed comparatively using protein data from eleven systems coded by 15 loci. S. fuscicollis weddelli and S. midas midas were the most polymorphic taxa, and S. bicolor the least. The results of the phylogenetic analyses (UPGMA and neighbor-joining) and the genetic distances between taxa were generally consistent with their geographic and probable phylogenetic relationships. Analyses of the S. bicolor and S. midas populations suggested that they represent no more than three subspecies of a single species, S. midas, with the bicolor forms belonging to a single subspecies, S. midas bicolor. If supported by additional studies, this would have important implications for the conservation of the bicolor form, which is endangered with extinction. The genetic similarity of S. fuscicollis and S. mystax was also consistent with their geographical and morphological proximity, although more data from a larger number of taxa will be required before the taxonomic relationships within the genus can be defined.

Welding of additively manufactured stainless steel parts: Comparative study between sheet metal and selective laser melted parts

Additive manufacturing is a fast growing manufacturing technology capable of producing complex objects without the need for conventional manufacturing process planning. During the process the work piece is built by adding material one layer at a time according to a digital 3D CAD model. At first additive manufacturing was mainly used to make prototypes but the development of the technology has made it possible to also make final products. Welding is the most common joining method for metallic materials. As the maximum part size of additive manufacturing is often limited, it may sometimes be required to join two or more additively manufactured parts together. However there has been almost no research on the welding of additively manufactured parts so far, which means that there has been very little information available on the possible differences compared to the welding of sheet metal parts. The aim of this study was to compare the weld joint properties of additively manufactured parts to those of sheet metal parts. The welding process that was used was TIG welding and the test material was 316L austenitic stainless steel. Weld joint properties were studied by making tensile, bend and hardness tests and by studying the weld microstructures with a microscope. Results show that there are certain characteristics in the welds of additively manufactured parts. The building direction of the test pieces has some impact on the mechanical properties of the weld. Nevertheless all the welds exhibited higher yield strength than the sheet metal welds but at the same time elongation at break was lower. It was concluded that TIG welding is a feasible process for welding additively manufactured parts.

A comparative study of aging of the elastic fiber system of the diaphragm and the rectus abdominis muscles in rats

In the present study the age-related changes of the striated muscle elastic fiber system were investigated in the diaphragm and rectus abdominis muscles of 1-, 4-, 8- and 18-month-old rats. The activation patterns of these muscles differ in that the diaphragm is regularly mobilized tens of times every minute during the entire life of the animal whereas the rectus abdominis, although mobilized in respiration, is much less and more irregularly activated. The elastic fibers were stained by the Verhoeff technique for mature elastic fibers. Weigert stain was used to stain mature and elaunin elastic fibers, and Weigert-oxone to stain mature, elaunin and oxytalan elastic fibers. The density of mature and elaunin elastic fibers showed a progressive increase with age, whereas the amount of oxytalan elastic fibers decreased in both diaphragm and rectus abdominis muscles and their muscular fascias. These age-related quantitative and structural changes of the elastic fiber system may reduce the viscoelastic properties of the diaphragm and rectus abdominis muscles, which may compromise the transmission of tensile muscle strength to the tendons and may affect maximum total strength.

Diagnostic investigation of ventilator-associated pneumonia using bronchoalveolar lavage: comparative study with a postmortem lung biopsy

The purpose of the present study was to validate the quantitative culture and cellularity of bronchoalveolar lavage (BAL) for the diagnosis of ventilator-associated pneumonia (VAP). A prospective validation test trial was carried out between 1992 and 1997 in a general adult intensive care unit of a teaching hospital. Thirty-seven patients on mechanical ventilation with suspected VAP who died at most three days after a BAL diagnostic procedure were submitted to a postmortem lung biopsy. BAL effluent was submitted to Gram staining, quantitative culture and cellularity count. Postmortem lung tissue quantitative culture and histopathological findings were considered to be the gold standard exams for VAP diagnosis. According to these criteria, 20 patients (54%) were diagnosed as having VAP and 17 (46%) as not having the condition. Quantitative culture of BAL effluent showed 90% sensitivity (18/20), 94.1% specificity (16/17), 94.7% positive predictive value and 88.8% negative predictive value. Fever and leukocytosis were useless for VAP diagnosis. Gram staining of BAL effluent was negative in 94.1% of the patients without VAP (16/17). Regarding the total cellularity of BAL, a cut-off point of 400,000 cells/ml showed a specificity of 94.1% (16/17), and a cut-off point of 50% of BAL neutrophils showed a sensitivity of 90% (19/20). In conclusion, BAL quantitative culture, Gram staining and cellularity might be useful in the diagnostic investigation of VAP.

Antinociceptive potency of aminoglycoside antibiotics and magnesium chloride: a comparative study on models of phasic and incisional pain in rats

A close relationship exists between calcium concentration in the central nervous system and nociceptive processing. Aminoglycoside antibiotics and magnesium interact with N- and P/Q-type voltage-operated calcium channels. In the present study we compare the antinociceptive potency of intrathecal administration of aminoglycoside antibiotics and magnesium chloride in the tail-flick test and on incisional pain in rats, taken as models of phasic and persistent post-surgical pain, respectively. The order of potency in the tail-flick test was gentamicin (ED50 = 3.34 µg; confidence limits 2.65 and 4.2) > streptomycin (5.68 µg; 3.76 and 8.57) = neomycin (9.22 µg; 6.98 and 12.17) > magnesium (19.49 µg; 11.46 and 33.13). The order of potency to reduce incisional pain was gentamicin (ED50 = 2.06 µg; confidence limits 1.46 and 2.9) > streptomycin (47.86 µg; 26.3 and 87.1) = neomycin (83.17 µg; 51.6 and 133.9). The dose-response curves for each test did not deviate significantly from parallelism. We conclude that neomycin and streptomycin are more potent against phasic pain than against persistent pain, whereas gentamicin is equipotent against both types of pain. Magnesium was less potent than the antibiotics and effective in the tail-flick test only.

Comparative study of IgA nephropathy with and without crescents

Glomerular crescents were analyzed as a prognostic factor in retrospectively reviewed data from 144 patients with biopsy-proven IgA nephropathy. Crescents were found in 26 (18%) patients, and detected in 2 to 100% of glomeruli in each specimen. In 5% of the patients more than 50% of the glomeruli were affected. Thirty patients with IgA nephropathy without crescents were studied as a control group. Mean age was 30.3 ± 9.4 and 30.2 ± 12.0 years for the patients with and without crescents, respectively, and males prevailed in both groups. The length of follow-up was 23.2 ± 41.6 months for patients with crescents and 29.3 ± 35.3 months for patients without crescents. Eighty percent of the patients with crescents were hypertensive, compared to 27% of the non-crescent control group (P < 0.05). Mean serum creatinine at the time of diagnosis was 3.9 ± 2.9 and 1.9 ± 2.1 mg/dl for the patients with and without crescents, respectively. Initial urinary protein excretion was higher in patients with crescents (4.6 ± 3.5 vs 1.2 ± 0.9 g/day; P < 0.05). At the end of follow-up 17 patients (77.3%) from the crescent group and 3 (11.1%) from the non-crescent group had end-stage renal disease (P < 0.0001). The presence of crescents was associated with higher levels of initial serum creatinine and urinary protein excretion, and a higher frequency of hypertension and progression to end-stage renal disease.

Comparative study of human exposure to mercury in riverside communities in the Amazon region

Four populations in the Amazon area were selected for a comparative study of mercury-exposed and non-exposed populations: São Luiz do Tapajós, Barreiras, Panacauera, and Pindobal Grande. The highest mercury levels in human hair samples were found in São Luiz do Tapajós and Barreiras, greatly exceeding the limits established by the World Health Organization. Panacauera showed an intermediate level below 9 µg/g. This was the first comparative and simultaneous evaluation of mercury exposure in the Amazon area. Also, thanks to this type of monitoring, we were able to eliminate the uncertainties about the reference dose. On the basis of these data, we can conclude that the mercury levels detected in exposed populations of the Tapajós River basin may be dangerous not only because they are above the World Health Organization limits, but also because the simultaneous mercury detection in non-exposed populations with similar characteristics provided a valid control and revealed lower mercury levels. Our results support the importance of continuous monitoring in both exposed and non-exposed populations.

Effects of exercise and metformin on the prevention of glucose intolerance: a comparative study

We aimed to evaluate the effects of aerobic exercise training (4 days) and metformin exposure on acute glucose intolerance after dexamethasone treatment in rats. Forty-two adult male Wistar rats (8 weeks old) were divided randomly into four groups: sedentary control (SCT), sedentary dexamethasone-treated (SDX), training dexamethasone-treated (DPE), and dexamethasone and metformin treated group (DMT). Glucose tolerance tests and in situ liver perfusion were undertaken on fasting rats to obtain glucose profiles. The DPE group displayed a significant decrease in glucose values compared with the SDX group. Average glucose levels in the DPE group did not differ from those of the DMT group, so we suggest that exercise training corrects dexamethasone-induced glucose intolerance and improves glucose profiles in a similar manner to that observed with metformin. These data suggest that exercise may prevent the development of glucose intolerance induced by dexamethasone in rats to a similar magnitude to that observed after metformin treatment.

A comparative study among methods used for wheat flour analysis and for measurements of gluten properties using the Wheat Gluten Quality Analyser (WGQA)

This study aimed at comparing both the results of wheat flour quality assessed by the new equipment Wheat Gluten Quality Analyser (WGQA) and those obtained by the extensigraph and farinograph. Fifty-nine wheat samples were evaluated for protein and gluten contents; the rheological properties of gluten and wheat flour were assessed using the WGQA and the extensigraph/farinograph methods, respectively, in addition to the baking test. Principal component analysis (PCA) and linear regression were used to evaluate the results. The parameters of energy and maximum resistance to extension determined by the extensigraph and WGQA showed an acceptable level for the linear correlation within the range from 0.6071 to 0.6511. The PCA results obtained using WGQA and the other rheological apparatus showed values similar to those expected for wheat flours in the baking test. Although all equipment used was effective in assessing the behavior of strong and weak flours, the results of medium strength wheat flour varied. WGQA has shown to use less amount of sample and to be faster and easier to use in relation to the other instruments used.

Acceptance of a food of animal origin obtained through genetic modification and cloning in South America: a comparative study among university students and working adults

AbstractWith the aim of comparing the acceptance of milk obtained from cloned, genetically modified (GM) and conventionally bred cows among working adults and university students, and identifying and characterizing typologies among both subsamples in terms of their preferences, a survey was applied to 400 people in southern Chile, distributed using a simple allocation among the subsamples. Using a conjoint analysis, it was found that consumers preferred milk from a conventional cow. Using a cluster analysis, in both subsamples two segments sensitive to production technology were identified. Rejection of cloning was greatest among university students, whereas a higher proportion of working adults rejected GM. The segments differed in terms of area of residence, knowledge about GM, and milk consumption habits. Contrary to what was expected, no differences were found according to education, gender or degree of satisfaction with food-related life.