867 resultados para Compact layer TiO2
Resumo:
The work in this paper deals with the development of momentum and thermal boundary layers when a power law fluid flows over a flat plate. At the plate we impose either constant temperature, constant flux or a Newton cooling condition. The problem is analysed using similarity solutions, integral momentum and energy equations and an approximation technique which is a form of the Heat Balance Integral Method. The fluid properties are assumed to be independent of temperature, hence the momentum equation uncouples from the thermal problem. We first derive the similarity equations for the velocity and present exact solutions for the case where the power law index n = 2. The similarity solutions are used to validate the new approximation method. This new technique is then applied to the thermal boundary layer, where a similarity solution can only be obtained for the case n = 1.
Resumo:
ABSTRACT : The whisker-to-barrel pathway of rodents is formed by a series of somatotopic projections from the mystacial whisker follicles to the layer IV of the primary somatosensory cortex such that each follicle corresponds to a cluster of cortical neurons called barrel. Barrels are present in layer IV but form part of functional columns that comprise the entire depth of the somatosensory cortex. Interestingly, the cortex of the barrelless mouse strain (BRL) is organized such a manner that thalamocortical afferents do not remodel their projections in layer IV and barrels fail to appear. Nevertheless, functionally, a columnar organization persists, indicating that functional columns are not only provided by thalamocortical projections and layer IV cells. Since in the visual cortex of cats, layer VI cells contribute to the response properties of layer IV neurons, we wonder whether layer VI pyramidal cells could contribute to the columnar organization of the primary somatosensory cortex of mice. To address -this question, we morphologically analyzed the distribution of intracortical axon collaterals of layer VI neurons after in-vivo juxtacellular injections of biocytin in the C2 barrel column. Injected hemispheres were tangentially serial cut and intracortical collaterals of individual layer VI neurons were reconstructed at the light microscopic level. The position of axonal boutons was recorded to evaluate the distribution of presumed synaptic contacts. In normal (NOR) mice, cluster analysis shows that layer VI pyramidal cells can be classified in four statistically different clusters of neurons. Moreover, we assume that two classes are formed by cortico-cortical neurons and two classes are formed by cortico-thalamic neurons. Looking at the direction of the main axon in the white matter, we noticed that its orientation correlates perfectly with the type of neuron: cortico-cortical neurons send main axon medially whereas cortico-thalamic neurons send main axon laterally. Performing the same study in the BRL strain, we showed that the BRL mutation affects layer VI pyramidal cells tangentially and radially: the effects of the mutation are illustrated by a significant decrease of the index of colurnnarization and a significant decrease of percentage of boutons in granular and supragranular layers comparing to NOR neurons. In spite of these differences, the same four classes of layer VI neurons have been found in BRL mice. Using a tangential analysis of the boutons distribution, we showed that putative synapses are distributed mainly in the C2 barrel column. This was observed for each layer, type of neuron, cluster or strain, indicating that layer VI pyramidal cells could participate to the functional columnar organization of the barrel cortex. To determine post-synaptic partners of layer VI neurons in layer IV, we conducted an ultrastructural analysis of layer VI-to-IV contacts. We showed that synapses principally occur on spines and spiny dendritic shafts, supposed to belong to excitatory neurons. We furthermore showed that pre-synaptic elements are significantly different between en passant and terminaux contacts, which support hypothesis that terminaux boutons should show longer duration of facilitation than en passant boutons. RÉSUMÉ : Le «whisker-to-barrel pathway» des rongeurs est caractérisé par une série de projections somatotopiques depuis les follicules des moustaches ('whiskers') jusqu'à la couche IV de l'aire somatosensorielle primaire, de telle façon que chaque follicule corresponde à un groupe de neurones corticaux appelés tonneaux (`barrels'). Les tonneaux sont seulement présents en couche IV mais font partie de colonnes fonctionnelles qui s'étendent sur toute la profondeur du cortex somatosensoriel. Chez les souris mutantes barrelless (BRL), le cortex somatosensoriel est organisé de façon telle que lés afférences thalamocorticales ne remodellent pas leurs projections en couche IV et que les tonneaux n'apparaissent pas. Fonctionnellement, pourtant, une organisation en colonnes persiste, ce qui indique que les colonnes fonctionnelles ne sont pas uniquement produites par les projections thalamocorticales et par les cellules de la couche IV. Puisque les cellules de la couche VI contribuent à influencer les réponses des cellules de la couche IV dans le cortex visuel du chat, nous nous sommes demandé si ces cellules ne pourraient pas aussi contribuer à l'organisation en colonnes du cortex somatosensoriel primaire de la souris. Pour répondre à cette question, nous avons analysé de façon morphologique la distribution intracorticale des collatéraux axonaux de neurones de la couche VI. Suite à des injections juxtacellulaires de biocytine in-vivo dans la colonne C2, les hémisphères cérébraux ont été tangentiellement coupés en série et les collatéraux intracorticaux des neurones de la couche VI ont été reconstruits en microscopie optique. La position des boutons axonaux a aussi été enregistrée pour évaluer la distribution des contacts synpptiques potentiels. Chez les souris NOR, une analyse multivariée montre que les cellules pyramidales de la couche VI sont distribuées en quatre classes. Deux de ces classes sont probablement formées de neurons cortico-corticaux, alors que les deux autres sont probablement formées de neurones corticothalamiques. En observant la direction de l'axone principal dans la matière blanche, nous avons noté que son orientation est parfaitement corrélée avec le type supposé de neurone : les neurones corticocorticaux envoient leurs axones principaux médiallement, alors que les neurons cortico-thalamiques envoient leurs axones principaux latéralement. En menant la même étude chez les souris BRL, nous avons montré que la mutation affecte les cellules pyramidales de la couche VI de façon tangentielle, mais aussi radiaire : les effets de 1a mutation se traduisent par une diminution significative de l'index de « columnarization » et de la connectivité en couches granulaire et supragranulaire. Malgré ces différences, les quatre mêmes classes de neurones ont été retrouvées. En utilisant une analyse tangentielle de la distribution des boutons, nous avons montré que les synapses potentielles sont distribuées principalement dans la colonne C2. Cette observation a été faite dans chaque couche, chaque type de neurones, chaque classe de neurones et chaque souche de souris, indicant que les cellules de la couche VI participent certainement à l'organisation en colonne du cortex somatosensoriel. Pour déterminer les partenaires post-synaptiques des cellules de la couche VI en couche IV, nous avons conduit une analyse ultrastructurelle de ces contacts. Nous avons montré que les synapses interviennent principalement sur les épines et sur les dendrites supposés appartenir à des cellules excitatrices. Nous avons aussi montré que les éléments pré-synaptiques de ces synapses sont significativement differents selon le type de bouton, en passant ou terminal, ce qui supporte l'hypothèse que les boutons terminaux seraient capables d'une plus longue facilitation.
Resumo:
Forensic examinations of ink have been performed since the beginning of the 20th century. Since the 1960s, the International Ink Library, maintained by the United States Secret Service, has supported those analyses. Until 2009, the search and identification of inks were essentially performed manually. This paper describes the results of a project designed to improve ink samples' analytical and search processes. The project focused on the development of improved standardization procedures to ensure the best possible reproducibility between analyses run on different HPTLC plates. The successful implementation of this new calibration method enabled the development of mathematical algorithms and of a software package to complement the existing ink library.
Resumo:
En aquest projecte s'ha estudiat la posada a punt d’un equip comercial ALD per a l’obtenció de capes primes d'alúmina a escala nanomètrica utilitzant vapor d’aigua i TMA com a precursors. Per tal de comprovar a bondat de les receptes experimentals aportades pel fabricant aixà com comprovar alguns aspectes de la teoria ALD s’han realitzat una sèrie de mostres variant els diferents parà metres experimentals, principalment la temperatura de deposició, el nombre de cicles, la durada del cicle i el tipus de substrat. Per a la determinació dels gruixos nanomètrics de les capes i per tant dels ritmes de creixement s’ha utilitzat la el·lipsometria, una de les poques tècniques no destructives capaç de mesurar amb gran precisió gruixos de capes o interfases de pocs à ngstroms o nanòmetres. En una primera etapa s'han utilitzat els valors experimentals donats pel fabricant del sistema ALD per determinar el ritme de creixement en funció de la temperatura de dipòsit i del numero de cicles, en ambdós casos sobre diversos substrats. S'ha demostrat que el ritme de creixement augmenta lleugerament en augmentar la temperatura de dipòsit, tot i que amb una variació petita, de l'ordre del 12% en variar 70ºC la temperatura de deposició. Aixà mateix s'ha demostrat la linealitat del gruix amb el número de cicles, tot i que no s’observa una proporcionalitat exacta. En una segona etapa s'han optimitzat els parà metres experimentals, bà sicament els temps de purga entre pols i pols per tal de reduir considerablement les durades dels experiments realitzats a relativament baixes temperatures. En aquest cas s’ha comprovat que es mantenien els ritmes de creixement amb una diferencia del 3,6%, 4,8% i 5,5% en optimitzar el cicles en 6,65h, 8,31h, o 8,33h, respectivament. A més, per una d'aquestes condicions s’ha demostrat que es mantenia l’alta conformitat de les capes d’alúmina. A més, s'ha realitzat un estudi de l'homogeneïtat del gruix de les capes en tota la zona de dipòsit del reactor ALD. S’ha demostrat que la variació en gruix de les capes dipositades a 120ºC és com a mà xim del 6,2% en una superfÃcie de 110 cm2. Confirmant l’excepcional control de gruixos de la tècnica ALD.
Resumo:
In this paper, different recovery methods applied at different network layers and time scales are used in order to enhance the network reliability. Each layer deploys its own fault management methods. However, current recovery methods are applied to only a specific layer. New protection schemes, based on the proposed partial disjoint path algorithm, are defined in order to avoid protection duplications in a multi-layer scenario. The new protection schemes also encompass shared segment backup computation and shared risk link group identification. A complete set of experiments proves the efficiency of the proposed methods in relation with previous ones, in terms of resources used to protect the network, the failure recovery time and the request rejection ratio
Resumo:
This paper focuses on QoS routing with protection in an MPLS network over an optical layer. In this multi-layer scenario each layer deploys its own fault management methods. A partially protected optical layer is proposed and the rest of the network is protected at the MPLS layer. New protection schemes that avoid protection duplications are proposed. Moreover, this paper also introduces a new traffic classification based on the level of reliability. The failure impact is evaluated in terms of recovery time depending on the traffic class. The proposed schemes also include a novel variation of minimum interference routing and shared segment backup computation. A complete set of experiments proves that the proposed schemes are more efficient as compared to the previous ones, in terms of resources used to protect the network, failure impact and the request rejection ratio
Resumo:
High-resolution structural information on optimally preserved bacterial cells can be obtained with cryo-electron microscopy of vitreous sections. With the help of this technique, the existence of a periplasmic space between the plasma membrane and the thick peptidoglycan layer of the gram-positive bacteria Bacillus subtilis and Staphylococcus aureus was recently shown. This raises questions about the mode of polymerization of peptidoglycan. In the present study, we report the structure of the cell envelope of three gram-positive bacteria (B. subtilis, Streptococcus gordonii, and Enterococcus gallinarum). In the three cases, a previously undescribed granular layer adjacent to the plasma membrane is found in the periplasmic space. In order to better understand how nascent peptidoglycan is incorporated into the mature peptidoglycan, we investigated cellular regions known to represent the sites of cell wall production. Each of these sites possesses a specific structure. We propose a hypothetic model of peptidoglycan polymerization that accommodates these differences: peptidoglycan precursors could be exported from the cytoplasm to the periplasmic space, where they could diffuse until they would interact with the interface between the granular layer and the thick peptidoglycan layer. They could then polymerize with mature peptidoglycan. We report cytoplasmic structures at the E. gallinarum septum that could be interpreted as cytoskeletal elements driving cell division (FtsZ ring). Although immunoelectron microscopy and fluorescence microscopy studies have demonstrated the septal and cytoplasmic localization of FtsZ, direct visualization of in situ FtsZ filaments has not been obtained in any electron microscopy study of fixed and dehydrated bacteria.
Resumo:
Se desarrollaron catalizadores de TiO2 dopados con nitrógeno para conseguir actividad fotocatalÃtica bajo irradiación visible. En este trabajo se reporta la sÃntesis de TiO2-N, usando urea y nitrato de amonio (NH4NO3) como precursores de nitrógeno, tanto a partir de un TiO2 generado in situ (método sol-gel) como mediante la modificación de un TiO2 comercial. Asà mismo, se varió la concentración de urea para encontrar el valor óptimo de nitrógeno, lo cual se comprobó mediante la oxidación fotocatalÃtica de ácido oxálico bajo irradiación con luz visible. Los materiales sintetizados se caracterizaron por medio de análisis elemental, y por reflectancia difusa UV-visible, encontrándose nitrógeno en todas las muestras, y un valor del ancho de banda prohibida en el rango 2-2,8 eV. Lamentablemente, se detectó una pérdida de nitrógeno cuando los fotocatalizadores eran reutilizados, lo cual causó una disminución de su actividad después de cada reacción, ya sea en presencia de oxÃgeno, o en ausencia de éste mientras se generaba hidrógeno. Entre los dopantes investigados el NH4NO3 mostro una mejor eficiencia en la producción de hidrógeno. Además, los resultados experimentales revelaron claramente que la deposición de platino en la superficie de los catalizadores TiO2-N desempeña un papel fundamental en el aumento de la generación de hidrógeno. Sin embargo, esta mejora dependÃa claramente del método de preparación de las muestras, obteniéndose mejores resultados con el TiO2-p25.
Resumo:
Technological limitations and power constraints are resulting in high-performance parallel computing architectures that are based on large numbers of high-core-count processors. Commercially available processors are now at 8 and 16 cores and experimental platforms, such as the many-core Intel Single-chip Cloud Computer (SCC) platform, provide much higher core counts. These trends are presenting new sets of challenges to HPC applications including programming complexity and the need for extreme energy efficiency.In this work, we first investigate the power behavior of scientific PGAS application kernels on the SCC platform, and explore opportunities and challenges for power management within the PGAS framework. Results obtained via empirical evaluation of Unified Parallel C (UPC) applications on the SCC platform under different constraints, show that, for specific operations, the potential for energy savings in PGAS is large; and power/performance trade-offs can be effectively managed using a cross-layerapproach. We investigate cross-layer power management using PGAS language extensions and runtime mechanisms that manipulate power/performance tradeoffs. Specifically, we present the design, implementation and evaluation of such a middleware for application-aware cross-layer power management of UPC applications on the SCC platform. Finally, based on our observations, we provide a set of recommendations and insights that can be used to support similar power management for PGAS applications on other many-core platforms.
Resumo:
Se prepararon partÃculas de nanocomposites basados en TiO2 y nanotubos de carbono multicapa platinizados para la obtención de combustibles solares. Se evaluó la actividad fotocatalÃtica del material en la producción de hidrógeno, en procesos de degradación de ácido fórmico, y en la obtención de hidrocarburos a partir de la reducción de CO2 en agua. Los nanocomposites fueron sintetizados por medio de la técnica sol-gel. Se estudió el efecto de la proporción y el diámetro de los nanotubos de carbono en la actividad del material bajo iluminación ultravioleta y visible. Se estudió el efecto de la adición de RuO2 (0,5% wt.) en la actividad bajo iluminación visible. Los materiales fueron caracterizados por ATR, XRD, BET, HRTEM y SEM. Se obtuvieron sólidos macroporosos, con contenido de fase anatasa superior al 99% y tamaño cristalino comprendido entre 15 y 21 nm. Los resultados cinéticos mostraron una producción óptima de hidrógeno para el composite TiO2/(5wt.%)MWCNT/Pt(60-80 nm), con eficiencia cuántica y eficiencia energética de 1,27% y 0,27%, respectivamente. En el caso de radiación visible, la producción de hidrógeno fue nula para los composites TiO2/MWCNT/Pt, mientras que para el sistema RuO2/TiO2/MWCNT/Pt se observó que la adicción de MWCNT inhibÃa la actividad fotocatalÃtica del composite RuO2/TiO2 en la región del visible. Por otra parte, en los ensayos de reducción de CO2 no se detectó ningún producto de reacción.
Resumo:
PURPOSE: Two mutations (R555Q and R124L) in the BIGH3 gene have been described in anterior or Bowman's layer dystrophies (CDB). The clinical, molecular, and ultrastructural findings of five families with CDB was reviewed to determine whether there is a consistent genotype:phenotype correlation. METHODS: Keratoplasty tissue from each patient was examined by light and electron microscopy (LM and EM). DNA was obtained, and exons 4 and 12 of BIGH3 were analyzed by polymerase chain reaction and single-stranded conformation polymorphism/heteroduplex analysis. Abnormally migrating products were analyzed by direct sequencing. RESULTS: In two families with type I CDB (CDBI), the R124L mutation was defined. There were light and ultrastructural features of superficial granular dystrophy and atypical banding of the "rod-shaped bodies" ultrastructurally. Patients from three families with "honeycomb" dystrophy were found to carry the R555Q mutation and had characteristic features of Bowman's dystrophy type II (CDBII). CONCLUSIONS: There is a strong genotype:phenotype correlation among CBDI (R124L) and CDBII (R555Q). LM and EM findings suggest that epithelial abnormalities may underlie the pathology of both conditions. The findings clarify the confusion over classification of the Bowman's layer dystrophies.
Resumo:
In mice, barrels in layer IV of the somatosensory cortex correspond to the columnar representations of whisker follicles. In barrelless (BRL) mice, barrels are absent, but functionally, a columnar organization persists. Previously we characterized the aberrant geometry of thalamic projection of BRL mice using axonal reconstructions of individual neurons. Here we proceeded with the analysis of the intracortical projections from layer VI pyramidal neurons, to assess their contribution to the columnar organization. From series of tangential sections we reconstructed the axon collaterals of individual layer VI pyramidal neurons in the C2 barrel column that were labelled with biocytin [controls from normal (NOR) strain, 19 cells; BRL strain, nine cells]. Using six morphological parameters in a cluster analysis, we showed that layer VI neurons in NOR mice are distributed into four clusters distinguished by the radial and tangential extent of their intracortical projections. These clusters correlated with the cortical or subcortical projection of the main axon. In BRL mice, neurons were distributed within the same four clusters, but their projections to the granular and supragranular layers were significantly smaller and their tangential projection was less columnar than in NOR mice. However, in both strains the intracortical projections had a preference for the appropriate barrel column (C2), indicating that layer VI pyramidal cells could participate in the functional columnar organization of the barrel cortex. Correlative light and electron microscopy analyses provided morphometric data on the intracortical synaptic boutons and synapses of layer VI pyramidal neurons and revealed that projections to layer IV preferentially target excitatory dendritic spines and shafts.
Resumo:
We present a compact portable biosensor to measure arsenic As(III) concentrations in water using Escherichia coli bioreporter cells. Escherichia coli expresses green fluorescent protein in a linearly dependent manner as a function of the arsenic concentration (between 0 and 100 μg/L). The device accommodates a small polydimethylsiloxane microfluidic chip that holds the agarose-encapsulated bacteria, and a complete optical illumination/collection/detection system for automated quantitative fluorescence measurements. The device is capable of sampling water autonomously, controlling the whole measurement, storing and transmitting data over GSM networks. We demonstrate highly reproducible measurements of arsenic in drinking water at 10 and 50 μg/L within 100 and 80 min, respectively.
Resumo:
Compact expressions, complete through second order in electrical and/or mechanical anharmonicity, are given for the dynamic dipole vibrational polarizability and dynamic first and second vibrational hyperpolarizabilities. Certain contributions not previously formulated are now included