999 resultados para Coeficientes Técnicos
Resumo:
This work provides great contribution to the documental study of the Work Safety courses offered by CEFETs in Brazil, under the perspective of safety management and occupational health, using as a referential the specification OHSAS 18001 (BSI, 1999), as well as directions provided by OIT (ILO, 2001). The theoretical research compares technical and managing competences of the projects of Work Safety courses at CEFETs with the international legislation mentioned above. For field research, questionnaires containing open and close questions were answered by teachers and students aiming at identifying the importance of technical and managing competences for the formation of Work Safety technicians, besides trying to identify which level of minimal formal knowledge should be required to perform managing activities in the area of Work Safety Management Systems and Occupational Health (SGSSO, in Portuguese). The results of the theoretical research point out differences between the projects of the Work Safety technical courses at CEFETs under the perspective of SGSSO. The field research shows that students and teachers opinions converge about most technical and managing competences. In relation to academic formation, the research suggests divergences to the criterion stated by the norm ISO 19011(ABNT, 2002)
Resumo:
O presente trabalho foi desenvolvido com o objetivo de determinar os coeficientes de digestibilidade aparente da proteína e da energia dos principais alimentos utilizados na formulação de dietas para alevinos de pintado. Foram utilizados 600 alevinos com peso médio inicial de 9,80 ± 1,48 g e comprimento total médio de 13,00 ± 1,00 cm. Na coleta de fezes, foi utilizado o sistema de Guelph modificado. As 12 dietas-teste foram constituídas por 69,50% de uma dieta de referência, 0,50% de óxido de cromo (marcador inerte) e 30% do ingrediente estudado. Após receberem as dietas teste durante três dias, os peixes foram transferidos para os aquários de coleta (incubadoras de fibra de vidro de 80 litros de capacidade), onde as fezes foram coletadas em intervalos de meia hora. Com base nos coeficientes de digestibilidade da fração protéica, os alimentos que apresentaram maior aproveitamento para esse nutriente foram: farinha de peixe (84,14%), farelo de soja (67,10%), milho (64,18%) e farinha de vísceras de aves (61,25%). Foram observados valores razoáveis somente para a digestibilidade do conteúdo energético em metade dos ingredientes estudados; para as farinhas de peixe, milho, soja integral tostada e os farelos de soja, de trigo e de arroz, os coeficientes médios foram: 72,80; 57,39; 64,95; 61,66; 53,20 e 51,84%, respectivamente. A farinha de peixe foi o melhor ingrediente para o pintado (45,38% PD e 2790,42 kcal ED/kg), seguido do farelo de soja (30,86% PD e 2708,45 kcal ED/kg), da soja integral tostada (18,34% PD e 3121,06 kcal ED/kg), do milho (5,86% PD e 2691,53 kcal ED/kg) e do farelo de trigo (8,08% PD e 2265,13 kcal ED/kg).
Resumo:
Materials denominated technical textiles can be defined as structures designed and developed with function to fulfill specific functional requirements of various industrial sectors as are the cases of the automotive and aerospace industries. In this aspect the technical textiles are distinguished from conventional textile materials, in which the aesthetic and of comfort needs are of primordial importance. Based on these considerations, the subject of this dissertation was established having as its main focus the study of development of textile structures from aramid and glass fibers and acting in order to develop the manufacture of composite materials that combine properties of two different structures, manufactured in an identical operation, where each structure contributes to improving the properties of the resulting composite material. Therefore were created in laboratory scale, textile structures with low weight and different composition: aramid (100%), glass (100%) and aramid /glass (65/35%), in order to use them as a reinforcing element in composite materials with polyester matrix. These composites were tested in tension and its fracture surface, evaluated by MEV. Based on the analysis of mechanical properties of the developed composites, the efficiency of the structures prepared as reinforcing element were testified by reason of that the resistance values of the composites are far superior to the polyester matrix. It was also observed that hybridization in tissue structure was efficient, since the best results obtained were for hybrid composites, where strength to the rupture was similar to the steel 1020, reaching values on the order of 340 MPa
Resumo:
Materials known as technical textiles can be defined as structures designed and developed to meet specific functional requirements of various industry sectors, which is the case in automotive and aerospace industries, and other specific applications. Therefore, the purpose of this work presents the development and manufacture of polymer composite with isophthalic polyester resin. The reinforcement of the composite structure is a technical textile fabric made from high performance fibers, aramid (Kevlar 49) and glass fiber E. The fabrics are manufactured by the same method, with the aim of improving the tensile strength of the resulting polymer composite material. The fabrics, we developed some low grammage technical textile structures in laboratory scale and differentiated-composition type aramid (100%), hybrid 1 aramid fiber / glass (65/35%) and hybrid 2 aramid fiber / glass (85/15% ) for use as a reinforcing element in composite materials with unsaturated isophthalic polyester matrix. The polymer composites produced were tested in uniaxial tensile fracture surface and it´s evaluated by SEM. The purpose of this work characterize the performance of polymer composites prepared, identifying changes and based on resistance to strain corresponding to the mechanical behavior. The objectives are to verify the capability of using this reinforcement structure, along with the use of high performance fibers and resin in terms of workability and mechanical strength; verify the adherence of the fiber to the matrix and the fracture surface by electron microscopy scanning and determination of tensile strength by tensile test. The results indicate that, in a comparative study to the response of uniaxial tensile test for tensile strength of the composites and the efficiency of the low percentage of reinforcement element, being a technical textile fabric structure that features characteristic of lightness and low weight added in polymer composites
Resumo:
Currently one of the major concerns in sports is to identify, select, discover and reveal talents in soccer. As principal reasons is perceived the search direct or indirect for resources for players, clubs, media, sports brands and their sponsors. However, high salaries are an exception and not a rule, because the majority of professional players in Brazil receives 1 minimum salary per month. It is also known that on professional clubs, daily, arriving several players to try to be a professional soccer player, however, the majority of clubs - almost all does not present methodological, systematic and analytical aspects to select promising players. The selective processes ("sieves" or "big sieves") developed by technical observers ( olheiros") summarized in the observation of the sportive performance of a big group of players in a period of few minutes given to each player. In this period the target behavior is the ability with the ball. If promising players are identified on that selection, they are referred to the club for a new observation, which will be conducted by the responsible coach of base category in question. It is understood by base categories, the amateur categories (not professional), to serve as a "base" for the formation of the cast of professional clubs. What are sub-13 (under 13 years), sub-15 (under 15 years), sub-17 (under 17 years) and sub-20 (under 20 years). The absence of common criterias and performance indicators of these professionals may hamper the evaluation of promising players, and be a costly activity for the club. This study proposes to identify, characterize and categorize the criterias and methods of behavioral evaluation, used by coaches of base categories of Rio Grande do Norte (RN) to evaluate the sportive performance of young soccer players, with the purpose of to compare the criterias of evaluation of sportive performance of young soccer players, used by coaches with different time of experience in function. The proposal had 2 pilot studies, the first (June and July, 2007) were interviewed 29 coaches, 17 of category sub-13 and 12 of category sub-17. The data were tabulated and organized into spreadsheets in order to describe, and developed a set of descriptors of behavior. And the second (May and June, 2008), with revisions made based on observations, analysis and descriptions found in the first, were interviewed 14 technical of category sub-15. After the results found in pilots, it was possible to outline the study in question, which had 46 coaches base categories of the RN. And from the results show that the characteristic of greatest importance, according to the interviewees was the behavior, the 2nd most important characteristic considered was the motivation, the 3rd was the ability and the 4th was the physical condition and the last was the affiliation. And by analyzing the results to the methods of evaluation of sportive performance used by coaches, it was noted clearly that most uses only the observation to select young soccer players. Therefore, needs a systematization to the selection of soccer players, since there is complexity in the verification of characteristics and aspects involved with purpose to avoid wrong evaluations and selections and the results negligible
Resumo:
This study sprang from the hypothesis that spatial variations in the morbidity rate for dengue fever within the municipality of Natal are related to intra-city socioeconomic and environmental variations. The objective of the project was to classify the different suburbs of Natal according to their living conditions and establish if there was any correlation between this classification and the incidence rate for dengue fever, with the aim of enabling public health planners to better control this disease. Data on population density, access to safe drinking water, rubbish collection, sewage disposal facilities, income level, education and the incidence of dengue fever during the years 2001 and 2003 was drawn from the Brazilian Demographic Census 2000 and from the Reportable Disease Notification System -SINAN. The study is presented here in the form of two papers, corresponding to the types of analysis performed: a classification of the urban districts into quartiles according to the living conditions which exist there, in the first article; and the incidence of dengue fever in each of these quartiles, in the second. By applying factorial analysis to the chosen socioeconomic and environmental indicators for the year 2000, a compound index of living condition (ICV) was obtained. On the basis of this index, it was possible to classify the urban districts into quartiles. On undertaking this grouping (paper 1), a heterogeneous distribution of living conditions was found across the city. As to the incidence rate for dengue fever (paper 2), it was discovered that the quartile identified as having the best living conditions presented incidence rates of 15.62 and 15.24 per 1000 inhabitants respectively in the years 2001 and 2003; whereas the quartile representing worst living conditions showed incidence rates of 25.10 and 10.32 for the comparable periods. The results suggest that dengue fever occurs in all social classes, and that its incidence is not related in any evident way to the chosen formula for living conditions
Resumo:
O objetivo deste estudo foi determinar o coeficiente de digestibilidade aparente (CDA) dos aminoácidos do milho, farelo de trigo, farelo de soja e da farinha de peixe. Empregaram-se juvenis de tilápia do Nilo (Oreochromis niloticus) (25,24 ± 3,88 g) alimentados com ração referência peletizada contendo 0,10% de óxido de crômio (indicador) e 33,78% de proteína bruta. O CDA médio dos aminoácidos foi de: 88,31; 77,40; 91,78 e 82,58% para o milho, farelo de trigo, farelo de soja e farinha de peixe, respectivamente. Ainda que os resultados sugiram que o CDA da proteína possa ser indicativo do CDA dos aminoácidos, seus valores individuais variaram dentre e entre os ingredientes avaliados. Os resultados obtidos demonstram que os valores de aminoácidos digestíveis devem ser usados na formulação de rações completas (precisas) e econômicas.
Resumo:
O principal objetivo deste estudo foi verificar o efeito do nível de performance aeróbia na relação entre os índices técnicos correspondentes à velocidade crítica (VC) e à velocidade máxima de 30 minutos (V30) em nadadores. Participaram deste estudo, 23 nadadores do gênero masculino com características antropométricas similares, divididos segundo o nível de performance aeróbia em grupo G1 (maior performance) (n = 13) e G2 (menor performance) (n = 10). Os indivíduos tinham pelo menos quatro anos de experiência no esporte e treinavam um volume semanal de 30.000 a 45.000m. A VC foi determinada através do coeficiente angular da regressão linear entre as distâncias (200 e 400m) e seus respectivos tempos. A V30 foi determinada através da máxima distância realizada em um teste de 30 minutos. Todas as variáveis foram determinadas no nado crawl. A VC foi significantemente maior do que a V30 no grupo G1 (1,30 ± 0,04 vs. 1,23 ± 0,06m.s-1) e no G2 (1,17 ± 0,08 vs. 1,07 ± 0,06m.s-1). As duas variáveis foram maiores no grupo G1. As taxas de braçada correspondentes à VC (TBVC) e à V30 (TBV30) obtidas nos grupos G1 (33,07 ± 4,34 vs. 31,38 ± 4,15 ciclos.min-1) e G2 (35,57 ± 6,52 vs. 33,54 ± 5,89 ciclos.min-1) foram similares entre si. A TBVC foi significantemente menor no grupo 1 do que no grupo 2, enquanto que a TBV30 não foi diferente entre os grupos. Os comprimentos de braçada correspondentes à VC (CBVC) e à V30 (CBV30) foram significantemente maiores no grupo G1 (2,41 ± 0,33 vs. 2,38 ± 0,30m.ciclo-1) do que no G2 (2,04 ± 0,43 vs. 1,97 ± 0,40m.ciclo-1), e similares entre si nos dois grupos. As correlações (r) entre a VC e a V30 e as variáveis técnicas correspondentes às duas velocidades foram significantes em todas as comparações (0,68 a 0,91). Portanto, a relação entre a velocidade e as variáveis técnicas correspondentes à VC e à V30 não é modificada pelo nível de performance aeróbia.
Resumo:
A Política Nacional do Meio Ambiente tem como objetivo a conciliação do desenvolvimento econômico e social com a qualidade ambiental, e dispõe de vários instrumentos que procuram contemplara capacidade de suporte do meio. Assim, a discussão sobre a localização das atividades é uma etapa importante para a avaliação da viabilidade ambiental de um determinado empreendimento, notadamente em processos de licenciamento ambiental. O trabalho apresenta uma abordagem metodológica para integração de critérios técnicos, ambientais e sociais em estudos de alternativas de localização de aterros sanitários, com especial atenção à interação entre os aspectos ambientais e os elementos fundamentais de um projeto (a saber, requisitos locacionais e concepção tecnológica), aplicado em um estudo de caso em São Carlos (SP). Como resultados principais, destacam-se o maior foco nos impactos significativos e a possibilidade de envolvimento de segmentos importantes da sociedade previamente à elaboração dos estudos ambientais.
Resumo:
Os bancos de sangue de cordão umbilical e placentário foram criados a partir da comprovação de que o sangue de cordão umbilical e placentário (SCUP) é uma fonte rica em células progenitoras hematopoéticas (CPH) e alternativa às células provenientes da medula óssea para transplante, fato que gerou o interesse pelo armazenamento das células nele contidas. A legislação brasileira distingue bancos para uso alogênico não aparentado (públicos) e para uso exclusivamente autólogo (privados). Por sua vez, o armazenamento de SCUP para uso familiar (doação dirigida) pode ser realizado em bancos de sangue de cordão umbilical e placentário públicos, serviços de hemoterapia ou centros de transplante, quando há um membro da família do nascituro com doença diagnosticada e que necessite de transplante de CPH como tratamento. Apesar de a legislação ser clara, a Anvisa tem identificado o interesse sobre a possibilidade da liberação de unidades de SCUP, armazenadas em bancos autólogos, para a utilização de outrem, familiar, além do recém-nascido beneficiário. O objetivo do trabalho visa promover a reflexão sobre uma possível modificação dos parâmetros legais nacionais que regem os bancos de SCUP autólogo, tornando-os bancos com vistas ao uso familiar, por meio da exposição dos principais elementos relacionados ao tema. O estudo analisou os critérios técnico-sanitários legais para regulamentação dos bancos; descreveu as características das CPH de diversas fontes e tipos de doação para transplante; contextualizou a relação com os princípios da Bioética; avanços sobre terapia e pesquisas relativas às CPH; e discutiu possíveis riscos envolvidos no processo.
Resumo:
Por meio da utilização de corpus de textos técnicos, jornalísticos e literários escritos originalmente em inglês e traduzidos para o português, pode-se efetuar uma análise das soluções propostas pelos tradutores ao lidarem com semelhanças e diferenças lingüísticas e culturais dos textos de partida e de chegada. Com esse intuito, aplicou-se o modelo descritivo-comparativo sugerido por Aubert (1984, 1998), o qual se origina das categorias de Vinay e Darbelnet ([1958, 1977] 1995), a fim de, primeiramente, identificar e, depois, classificar os procedimentos ou modalidades empregadas na tradução desses gêneros textuais. Registraram-se como modalidades de maior incidência nos três corpora: a tradução literal, a transposição e a modulação. em virtude de a alta freqüência da tradução literal ocorrer em textos técnicos e, contrariamente ao esperado, incidir com proporção ainda maior em textos jornalísticos, poder-se-ia inferir uma tendência para automatismos na tradução desses dois tipos de textos. Já a necessidade de um emprego acentuado da modulação e da transposição com modulação em textos literários poderia ser decorrente de uma participação mais ativa do tradutor na tentativa de escapar da literalidade e proceder a uma maior reelaboração, a fim de passar características normalmente associadas à linguagem do romance.
Resumo:
Este trabalho analisa, de forma empírica, no período 1995-2005, os impactos de variações cambiais sobre os preços de exportação no Brasil, desagregados setorialmente, levando em consideração a inserção externa da economia em um contexto de ampliação da internacionalização e reestruturação produtiva. O cálculo dos coeficientes de pass-through é complementado por um exercício de análise fatorial, com o objetivo de verificar se é possível encontrar padrões setoriais definidos. Os resultados indicam maiores repasses em setores produtores de bens de menor conteúdo tecnológico em que o Brasil possui posição comercial relativamente forte, ao passo que parte dos setores produtores de manufaturados apresenta coeficientes de repasse cambial reduzido.
Resumo:
Friction loss coefficients for laminar flow of xantan gum solutions (concentrations in the range of 0.1-0.5% by weight) through valves and fittings were experimentally determined. The rheological behavior, studied by means of a concentric cylinder rheometer, was pseudoplastic, being well described by the Ostwald-De Waele model with non-linear correlation coefficients (r) between 0.998 and 0.999. In the pressure drop measurements the following fittings were employed: completely open and half way open ball valve, completely open and half way open angle valve, tee used like coupling, tee used like a 90° elbow, short radius 90° elbow and coupling. The results showed that the friction loss coefficients increased with decreasing generalized Reynolds number. The friction loss coefficients could be well adjusted by a potential model, suggested by Kittredge & Rowley (1957) for Newtonian fluids, K f = A(Re g) -B, with correlation coefficients between 0.837 and 0.999.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)