Heavy metals as markers for assessing environmental pollution from chemical warehouse and plastics fires

Case histories of large, accidental fires are presented to illustrate that heavy metals may be used as markers to assess the extent of localized environmental contamination resulting from fires. Due to the complexity of fire chemistry with respect to organic pollutants, determination of organic pollutants in the environment following a fire would be time consuming and expensive. Using heavy metals as markers on the other hand is much cheaper and can be done very rapidly. © 1995.

ALMA-resolved salt emission traces the chemical footprint and inner wind morphology of VY Canis Majoris

(abreviated) We aim to study the inner-wind structure (R<250 Rstar) of the well-known red supergiant VY CMa. We analyse high spatial resolution (~0".24x0".13) ALMA Science Verification (SV) data in band 7 in which four thermal emission lines of gaseous sodium chloride (NaCl) are present at high signal-to-noise ratio. For the first time, the NaCl emission in the inner wind region of VY CMa is spatially resolved. The ALMA observations reveal the contribution of up to four different spatial regions. The NaCl emission pattern is different compared to the dust continuum and TiO2 emission already analysed from the ALMA SV data. The emission can be reconciled with an axisymmetric geometry, where the lower density polar/rotation axis has a position angle of ~50 degrees measured from north to east. However, this picture can not capture the full morphological diversity, and discrete mass ejection events need to be invoked to explain localized higher-density regions. The velocity traced by the gaseous NaCl line profiles is significantly lower than the average wind terminal velocity, and much slower than some of the fastest mass ejections, signalling a wide range of characteristic speeds for the mass loss. Gaseous NaCl is detected far beyond the main dust condensation region. Realising the refractory nature of this metal halide, this hints at a chemical process preventing all NaCl from condensing onto dust grains. We show that in the case of the ratio of the surface binding temperature to the grain temperature being ~50, only some 10% of NaCl remains in gaseous form, while for lower values of this ratio thermal desorption efficiently evaporates NaCl. Photodesorption by stellar photons seems not to be a viable explanation for the detection of gaseous NaCl at 220 Rstar from the central star, and instead, we propose shock-induced sputtering driven by localized mass ejection events as alternative.

Chemical composition and pharmacological activities of essential oils of Lavandula spp.

Lavandula spp. belong to the family Lamiatae and some species are often used in popular medicine and have been used for centuries in a large number of medical applications and in aromatherapy. Although similar ethnobotanical properties of Lavandula spp., its essential oils, general chemical composition and therapeutic applications differ from different species. Lavandula stoechas L. subsps. luisieri (Rozeira) Rozeira and L. viridis L’Hér are endemic to the Iberian Peninsula, widespread in the South of Portugal, namely in Southern Alentejo and Algarve. The aim of our study was evaluate the chemical composition and toxicological and pharmacological activities of leaves essential oils of spontaneous plants of L. stoechas L. subsps. luisieri (Alentejo) and L. viridis (Algarve). The essential oils of these wild plants, collected in spring, were obtained by hydrodistillation in a Clevenger-type apparatus and its chemical composition was evaluated by GC/FID. The acute toxicity of essential oils was evaluated "in vitro" using brine shrimp (LC50) and "in vivo" using Swiss mice (DL50). The analgesic and anti-inflammatory pharmacological properties of L. stoechas subsp. luisieri essential oil were evaluated in mouse or rats by the Amour-Smith and carrageen-induced paw edema tests, respectively. Results showed important differences in chemical composition of essential oils from two species analyzed either to diversity and proportion of its constituents. The essentials oils showed citotoxicity against Artemia salina and a DL50 higher than 2000 mg/kg for mice. The analgesic and anti-inflammatory activities of essential oils were exhibit for the doses of 100 and 200 mg/kg.

CHEMICAL COMPOSITION AND ANTIMICROBIAL ACTIVITY OF ESSENTIAL OILS OF LAVANDULA SPP.

Lavenders belong to the family Labiatae and represent some of the most popular medicinal plants of great economic importance. Their essential oils are important for the perfume, cosmetic, flavouring and pharmaceutical industries. However, despite its popularity, and the long tradition of use, biological properties of the various Lavandula species are not yet been well sustained by scientific or clinical studies and some available data being inconclusive and controversial [1]. Although Lavandula spp. have similar ethnobotanical properties, however, chemical composition and therapeutic uses differ from different species and main composition of essential oils showed differences with species and with the region were they grow [1,2,3]. L. stoechas L. subsps. luisieri (Rozeira) Rozeira. L. pedunculata (Mill.) Cav. and L. viridis L’Hér are endemic to the Iberian Peninsula, widespread in the South of Portugal, namely in Alentejo and Algarve. In our work, essential oils from the stems or leaves from wild grown plants of L. luisieri (Alentejo), L. pedunculata (Alentejo) and L. viridis (Algarve), were extracted by hydrodistillation and analyzed by GC-FID. Antimicrobial activity was evaluated by solid diffusion disk assay and minimal inhibitory concentration (MIC) against pathogenic Gram-positive and Gram-negative bacteria and food spoilage fungi.

Effect of storage on physical-chemical properties and phenolics of sweet cherry from São Julião region.

Effect of storage on physical-chemical properties and phenolics of sweet cherry from São Julião region. A.C. Agulheiro-Santos1, F. Vieira1, D. Gonzalez2, M. Lozano2, V. Palma1, A.E. Rato1 1Universidade de Évora. Instituto de Ciências Agrárias e Ambientais Mediterrânica (ICAAM). 7000 Évora, Portugal. 2Centro de Investigaciones Científicas y Tecnológicas de Extremadura (CICYTEX). Ctra. San Vicente. Finca Santa Engracia. 06071 Badajoz, Spain. Worldwide the consumption of fruit and vegetables is increasing due to the dietary guidelines recommended by nutritionist. Because of their high content on phenols, vitamins, mineral and antioxidants, berry fruits are consumed not only in fresh forms but also as processed and derivative products such as juices, yogurts, jellies and dried fruits. As a high consumed red fruit, sweet cherry has been the focus on some studies, mainly regarding bioactive compounds content. “Sweetheart” cherries from São Julião region (Alentejo, Portugal) from two different production campaigns were kept in different storage conditions in order to evaluate both the environmental and storage effect on some physical-chemical properties and phenolics. Cold conditions - Cold (1 ºC, 95% RH) and modified atmosphere - MA (1 ºC, 95% RH with micro-perforated bags of Pplus®, Sidlaw Packaging, Bristol, UK) were tested. In order to establish the appropriate storage conditions, individual phenolic acids and physical-chemical properties were analysed during two consecutive years. Results show a general decrease on phenolic compounds content between cherries from both years. It is also observed that MA conditions do not affect significantly both phenolics and physical-chemical parameters when compared with Cold conditions. Additionally, it is observed similar behaviour on Cold and MA sweet cherries regarding its pH, total soluble solids content (TSS), titratable acidity (TA) and colour and individual phenols during storage time. Concluding, these results show, as expected, changes between cultivars which may be correlated with the environmental conditions on different years. Keywords: sweet cherry, postharvest, phenols, physical-chemical, storage conditions.

Circulation patterns and processes in Barkley Sound, Vancouver, BC

Senior thesis written for Oceanography 444

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.

Physico-chemical characterization and oxidative reactivity evaluation of aged brake wear particles

Brake wear dust is a significant component of traffic emissions and has been linked to adverse health effects. Previous research found a strong oxidative stress response in cells exposed to freshly generated brake wear dust. We characterized aged dust collected from passenger vehicles, using microscopy and elemental analyses. Reactive oxygen species (ROS) generation was measured with acellular and cellular assays using 2′7-dichlorodihydrofluorescein dye. Microscopy analyses revealed samples to be heterogeneous particle mixtures with few nanoparticles detected. Several metals, primarily iron and copper, were identified. High oxygen concentrations suggested that the elements were oxidized. ROS were detected in the cell-free fluorescent test, while exposed cells were not dramatically activated by the concentrations used. The fact that aged brake wear samples have lower oxidative stress potential than fresh ones may relate to the highly oxidized or aged state of these particles, as well as their larger size and smaller reactive surface area.

Distribution of excitation energy in photosynthesis: a study of heat loss, photo chemical activity and fluorescence emission in intact calls of cyanobacterium.

Photosynthetic state transitions were investigated in the cyanobacterium Synechococcus sp. PCC 6301 by studying fluorescence emission, heat loss, and PS I activity in intact cells brought to state 1 and state 2. 77K fluorescence emission spectra were modelled with a sum of 6 components corresponding to PBS, PS II, and PS I emissions. The modelled data showed a large decrease in PS II fluorescence accompanied with a small increase in the PS I fluorescence upon transition to state 2 for excitation wavelengths absorbed by both PBS and ChI ll.. The fluorescence changes seen with ChI .a. excitations do not support the predictions of the mobile PBS model of state transition in PBS-containing organisms. Measurements of heat loss from intact cells in the two states were similar for both ChI it. and PBS excitations over three orders of magnitude of laser flash intensity. This suggests that the PBS does not become decoupled from PS II in state 2 as proposed by the PBS detachment model of state transition in PBS-containing organisms. PS I activity measurements done on intact cells showed no difference in the two states, in contrast with the predictions of all of the existing models of state transitions. Based on these results a model for state transition In PBScontaining organisms is proposed, with a PS II photoprotectory function.

Chemical, biochemical, and molecular characterization of a low vindoline Catharanthus roseus mutant.

The Madagascar periwinkle (Catharanthus roseus) is the sole source of the anticancer drug vinblastine, which is formed via the coupling of monoterpenoid indole alkaloids (MIAs) catharanthine and vindoline. A mutant line of C. roseus (M2-1865) with an altered MIA profile was identified in a screen of 4000 M2 lines generated by ethylmethanesulfonate (EMS) chemical mutagenesis. While this line did not accumulate vinblastine due to reduced levels of vindoline within the leaves, significant levels of 2,3-epoxide derivatives of tabersonine accumulated on the leaf surface. Detailed nucleotide, amino acid, and enzyme activity analyses of tabersonine 3-reductase in the M2-1865 line showed that a single amino acid substitution (H189Y) diminished the biochemical activity of T3R by 95%. Genetic crosses showed the phenotype to be recessive, exhibiting standard Mendelian single-gene inheritance. The usefulness of EMS mutagenesis in elucidating MIA biosynthesis is highlighted by the results of this study.

Bivariate semi-Pareto distributions and processes

A bivariate semi-Pareto distribution is introduced and characterized using geometric minimization. Autoregressive minification models for bivariate random vectors with bivariate semi-Pareto and bivariate Pareto distributions are also discussed. Multivariate generalizations of the distributions and the processes are briefly indicated.