Minimal analytical characterization of engineered nanomaterials needed for hazard assessment in biological matrices.

Abstract This paper presents the outcomes from a workshop of the European Network on the Health and Environmental Impact of Nanomaterials (NanoImpactNet). During the workshop, 45 experts in the field of safety assessment of engineered nanomaterials addressed the need to systematically study sets of engineered nanomaterials with specific metrics to generate a data set which would allow the establishment of dose-response relations. The group concluded that international cooperation and worldwide standardization of terminology, reference materials and protocols are needed to make progress in establishing lists of essential metrics. High quality data necessitates the development of harmonized study approaches and adequate reporting of data. Priority metrics can only be based on well-characterized dose-response relations derived from the systematic study of the bio-kinetics and bio-interactions of nanomaterials at both organism and (sub)-cellular levels. In addition, increased effort is needed to develop and validate analytical methods to determine these metrics in a complex matrix.

Characterization and discrimination of soils by their reflected electromagnetic energy

The objective of this work was to verify if reflected energy of soils can characterize and discriminate them. A spectroradiometer (Spectral reflectance between: 400-2,500 nm) was utilized in laboratory. The soils evaluated are located in Bauru region, SP, Brazil, and are classified as Typic Argiudoll (TR), Typic Eutrorthox (LR), Typic Argiudoll (PE), Typic Haplortox (LE), Typic Paleudalf (PV) and Typic Quartzipsamment (AQ). They were characterized by their spectral reflectance as for descriptive conventional methods (Brazilian and International) according to the types of spectral curves. A method for the spectral descriptive evaluation of soils was established. It was possible to characterize and discriminate the soils by their spectral reflectance, with exception for LR and TR. The spectral differences were better identified by the general shape of spectral curves, by the intensity of band absorption and angle tendencies. These characteristics were mainly influenced by organic matter, iron, granulometry and mineralogy constituents. A reduction of iron and clay contents, which influenced higher reflectance intensity and shape variations, occurred on the soils LR/TR, PE, LE, PV and AQ, on that sequence. Soils of the same group with different clay textures could be discriminated. The conventional descriptive evaluation of spectral curves was less efficient on discriminating soils. Simulated orbital data discriminated soils mainly by bands 5 and 7.

Constraining 3-D electrical resistance tomography with GPR reflection data forimproved aquifer characterization

Surface-based ground penetrating radar (GPR) and electrical resistance tomography (ERT) are common tools for aquifer characterization, because both methods provide data that are sensitive to hydrogeologically relevant quantities. To retrieve bulk subsurface properties at high resolution, we suggest incorporating structural information derived from GPR reflection data when inverting surface ERT data. This reduces resolution limitations, which might hinder quantitative interpretations. Surface-based GPR reflection and ERT data have been recorded on an exposed gravel bar within a restored section of a previously channelized river in northeastern Switzerland to characterize an underlying gravel aquifer. The GPR reflection data acquired over an area of 240×40 m map the aquifer's thickness and two internal sub-horizontal regions with different depositional patterns. The interface between these two regions and the boundary of the aquifer with then underlying clay are incorporated in an unstructured ERT mesh. Subsequent inversions are performed without applying smoothness constraints across these boundaries. Inversion models obtained by using these structural constraints contain subtle resistivity variations within the aquifer that are hardly visible in standard inversion models as a result of strong vertical smearing in the latter. In the upper aquifer region, with high GPR coherency and horizontal layering, the resistivity is moderately high (N300 Ωm). We suggest that this region consists of sediments that were rearranged during more than a century of channelized flow. In the lower low coherency region, the GPR image reveals fluvial features (e.g., foresets) and generally more heterogeneous deposits. In this region, the resistivity is lower (~200 Ωm), which we attribute to increased amounts of fines in some of the well-sorted fluvial deposits. We also find elongated conductive anomalies that correspond to the location of river embankments that were removed in 2002.

Characterization of mandarin citrus germplasm from Southern Brazil by morphological and molecular analyses

The objective of this work was to characterize mandarin (Citrus spp.) germplasm from Southern Brazil by morphological and molecular analyses. Thirty seven cultivars from 34 distinct mandarin varieties were evaluated by morphological and agronomic traits of leaves, flowers and fruits, and by microsatellite markers. The morphological and agronomic characteristics suggested that almost all varieties can be produced for commercial use, and some, as the Satsuma variety, are recommended for breeding programs. Pooled DNA samples from 1-5 plants belonging to each cultivar were tested. Eight of the nine primers detected polymorphisms. Specific markers were found for some accessions. The dendrogram constructed with the morphological results divided the 37 cultivars into four groups, while that obtained with the microsatellites clustered 35 of the 37 cultivars into three groups only. Generally, intervarietal differences are not high, and this lack of agreement in the two multifactorial analyses indicates that diverse evolutionary factors are acting at these two levels of investigation.

Characterization of the surface hydrophobicity of filamentous fungi.

A method for the quantitative analysis of the hydrophobicity of the mycelial mat of filamentous fungi based on contact angle measurements is presented. It was tested for a range of fungi belonging to the classes of basidiomycetes, ascomycetes and deuteromycetes. The measured contact angles of the mycelial mats ranged between hydrophilic (<30 degrees) for the deuteromycetes Fusarium oxysporum Fo47 GUS1 and Trichoderma harzianum P1[pZEGA1] and hydrophobic (>60 degrees) for the ascomycete Cladosporium sp. DSE48.1b and the basidiomycetes Paxillus involutus WSL 37.7, Hebeloma crustiliniforme WSL 6.2, Suillus bovinus WSL 48.1 and Laccaria bicolor WSL 73.1. For some fungi, variations in the hydrophobicity of the mycelium depending on the growth medium, the physiological state and the exposure to water were distinguished.

Determination and Evaluation of Alternate Methods for Managing and Controlling Highway-Related Dust, TR-449, 2002

Road dust is caused by wind entraining fine material from the roadway surface and the main source of Iowa road dust is attrition of carbonate rock used as aggregate. The mechanisms of dust suppression can be considered as two processes: increasing particle size of the surface fines by agglomeration and inhibiting degradation of the coarse material. Agglomeration may occur by capillary tension in the pore water, surfactants that increase bonding between clay particles, and cements that bind the mineral matter together. Hygroscopic dust suppressants such as calcium chloride have short durations of effectiveness because capillary tension is the primary agglomeration mechanism. Somewhat more permanent methods of agglomeration result from chemicals that cement smaller particles into a mat or larger particles. The cements include lignosulfonates, resins, and asphalt products. The duration of the cements depend on their solubility and the climate. The only dust palliative that decreases aggregate degradation is shredded shingles that act as cushions between aggregate particles. It is likely that synthetic polymers also provide some protection against coarse aggregate attrition. Calcium chloride and lignosulfonates are widely used in Iowa. Both palliatives have a useful duration of about 6 months. Calcium chloride is effective with surface soils of moderate fine content and plasticity whereas lignin works best with materials that have high fine content and high plasticity indices. Bentonite appears to be effective for up to two years and works well with surface materials having low fines and plasticity and works well with limestone aggregate. Selection of appropriate dust suppressants should be based on characterization of the road surface material. Estimation of dosage rates for potential palliatives can be based on data from this report, from technical reports, information from reliable vendors, or laboratory screening tests. The selection should include economic analysis of construction and maintenance costs. The effectiveness of the treatment should be evaluated by any of the field performance measuring techniques discussed in this report. Novel dust control agents that need research for potential application in Iowa include; acidulated soybean oil (soapstock), soybean oil, ground up asphalt shingles, and foamed asphalt. New laboratory evaluation protocols to screen additives for potential effectiveness and determine dosage are needed. A modification of ASTM D 560 to estimate the freeze-thaw and wet-dry durability of Portland cement stabilized soils would be a starting point for improved laboratory testing of dust palliatives.

Simulated-annealing-based conditional simulation for the local-scale characterization of heterogeneous aquifers

Simulated-annealing-based conditional simulations provide a flexible means of quantitatively integrating diverse types of subsurface data. Although such techniques are being increasingly used in hydrocarbon reservoir characterization studies, their potential in environmental, engineering and hydrological investigations is still largely unexploited. Here, we introduce a novel simulated annealing (SA) algorithm geared towards the integration of high-resolution geophysical and hydrological data which, compared to more conventional approaches, provides significant advancements in the way that large-scale structural information in the geophysical data is accounted for. Model perturbations in the annealing procedure are made by drawing from a probability distribution for the target parameter conditioned to the geophysical data. This is the only place where geophysical information is utilized in our algorithm, which is in marked contrast to other approaches where model perturbations are made through the swapping of values in the simulation grid and agreement with soft data is enforced through a correlation coefficient constraint. Another major feature of our algorithm is the way in which available geostatistical information is utilized. Instead of constraining realizations to match a parametric target covariance model over a wide range of spatial lags, we constrain the realizations only at smaller lags where the available geophysical data cannot provide enough information. Thus we allow the larger-scale subsurface features resolved by the geophysical data to have much more due control on the output realizations. Further, since the only component of the SA objective function required in our approach is a covariance constraint at small lags, our method has improved convergence and computational efficiency over more traditional methods. Here, we present the results of applying our algorithm to the integration of porosity log and tomographic crosshole georadar data to generate stochastic realizations of the local-scale porosity structure. Our procedure is first tested on a synthetic data set, and then applied to data collected at the Boise Hydrogeophysical Research Site.

Characterization of human pancreatic orthotopic tumor xenografts suitable for drug screening

Background Efforts to identify novel therapeutic options for human pancreatic ductal adenocarcinoma (PDAC) have failed to result in a clear improvement in patient survival to date. Pancreatic cancer requires efficient therapies that must be designed and assayed in preclinical models with improved predictor ability. Among the available preclinical models, the orthotopic approach fits with this expectation, but its use is still occasional. Methods An in vivo platform of 11 orthotopic tumor xenografts has been generated by direct implantation of fresh surgical material. In addition, a frozen tumorgraft bank has been created, ensuring future model recovery and tumor tissue availability. Results Tissue microarray studies allow showing a high degree of original histology preservation and maintenance of protein expression patterns through passages. The models display stable growth kinetics and characteristic metastatic behavior. Moreover, the molecular diversity may facilitate the identification of tumor subtypes and comparison of drug responses that complement or confirm information obtained with other preclinical models. Conclusions This panel represents a useful preclinical tool for testing new agents and treatment protocols and for further exploration of the biological basis of drug responses.

Characterization of human pancreatic orthotopic tumor xenografts suitable for drug screening

Background Efforts to identify novel therapeutic options for human pancreatic ductal adenocarcinoma (PDAC) have failed to result in a clear improvement in patient survival to date. Pancreatic cancer requires efficient therapies that must be designed and assayed in preclinical models with improved predictor ability. Among the available preclinical models, the orthotopic approach fits with this expectation, but its use is still occasional. Methods An in vivo platform of 11 orthotopic tumor xenografts has been generated by direct implantation of fresh surgical material. In addition, a frozen tumorgraft bank has been created, ensuring future model recovery and tumor tissue availability. Results Tissue microarray studies allow showing a high degree of original histology preservation and maintenance of protein expression patterns through passages. The models display stable growth kinetics and characteristic metastatic behavior. Moreover, the molecular diversity may facilitate the identification of tumor subtypes and comparison of drug responses that complement or confirm information obtained with other preclinical models. Conclusions This panel represents a useful preclinical tool for testing new agents and treatment protocols and for further exploration of the biological basis of drug responses.

Characterization of Tomato yellow spot virus, a novel tomato-infecting begomovirus in Brazil

The objective of this work was the biological and molecular characterization of a begomovirus detected in São Joaquim de Bicas, Minas Gerais, Brazil, named TGV-[Bi2], by determining its host range, complete nucleotide sequence and phylogenetic relationships with other begomoviruses. Biological characterization consisted of a host range study using either sap inoculation or particle bombardment as inoculation methods. The yellow spot virus can infect plants in Solanaceae and Amaranthaceae, including economically importat crops as sweet pepper, and weeds as Datura stramonium and Nicotiana silvestris. For the molecular characterization, the full-length genome (DNA-A and DNA-B) was amplified, cloned and completely sequenced. Sequence comparisons and phylogenetic analyses indicated that TGV-[Bi2] constitutes a novel begomovirus species named Tomato yellow spot virus (ToYSV), closely related to Sida mottle virus (SiMoV).

Characterization of polyphosphate synthesis by isolated yeast vacuoles

Polyphosphate (iPOP) is a linear polymer of orthophosphate units linked together by high energy phosphoanhydride bonds. It is found in all organisms, localized in organelles called acidocalcisomes and ranges from a few to few hundred monomers in length. iPOP has been found to play a vast array of roles in all organisms, including phosphate and energy metabolism, regulation of enzymes, virulence, pathogenicity, bone remodelling and blood clotting, among many others. Recently it was found that iPOP levels were increased in myeloma cells. The growing interest in iPOP in human cell lines makes it an interesting molecule to study. However, not much is known about its metabolism in eukaryotes. Acidocalcisomes are electron dense, acidic organelles that belong to the group of Lysosome Related Organelles (LROs). The conservation of acidocalcisomes among all kingdoms of life is suggestive of their important roles for the organisms. However, they are difficult to analyse because of limited biochemical tools for investigation. Yeast vacuoles present remarkable similarities to acidocalcisomes in terms of their physiological and structural features, including synthesis and storage of iPOP, which make them an ideal candidate to study biological processes which are shared between vacuoles and acidocalcisomes. The availability of tools for genetic manipulation and isolation of vacuoles makes yeast a candidate of choice for the characterization of iPOP synthesis in eukaryotes. Our group has identified the Vacuolar Transporter Chaperone (VTC) complex as iPOP polymerase and identified the catalytic subunit (Vtc4). The goal of my study was to characterize the process of iPOP synthesis by isolated vacuoles and to reconstitute iPOP synthesis in liposomes. The first step was to develop a method for monitoring iPOP by isolated vacuoles over time and comparing it with previously known methods. Next, a detailed characterization was performed to determine the modulators of the process, both for intact as well as solubilized vacuoles. Finally, attempts were made to purify the VTC complex and reconstitute it in liposomes. A parallel line of study was the translocation and storage of synthesized iPOP in the lumen of the vacuoles. As a result of this study, it is possible to determine distinct pools of iPOP- inside and outside the vacuolar lumen. Additionally, I establish that the vacuolar lysate withstands harsh steps during reconstitution on liposomes and retains iPOP synthesizing activity. The next steps will be purification of the intact VTC complex and its structure determination by cryo-electron microscopy. - Les organismes vivants sont composés d'une ou plusieurs cellules responsables des processus biologiques élémentaires tels que la digestion, la respiration, la synthèse et la reproduction. Leur environnement interne est en équilibre et ils réalisent un très grand nombre de réactions chimiques et biochimiques pour maintenir cet équilibre. A différents compartiments cellulaires, ou organelles, sont attribuées des tâches spécifiques pour maintenir les cellules en vie. L'étude de ces fonctions permet une meilleure compréhension de la vie et des organismes vivants. De nombreux processus sont bien connus et caractérisés mais d'autres nécessitent encore des investigations détaillées. L'un de ces processus est le métabolisme des polyphosphates. Ces molécules sont des polymères linéaires de phosphate inorganique dont la taille peut varier de quelques dizaines à quelques centaines d'unités élémentaires. Ils sont présents dans tous les organismes, des bactéries à l'homme. Ils sont localisés principalement dans des compartiments cellulaires appelés acidocalcisomes, des organelles acides observés en microscopie électronique comme des structures denses aux électrons. Les polyphosphates jouent un rôle important dans le stockage et le métabolisme de l'énergie, la réponse au stress, la virulence, la pathogénicité et la résistance aux drogues. Chez l'homme, ils sont impliqués dans la coagulation du sang et le remodelage osseux. De nouvelles fonctions biologiques des polyphosphates sont encore découvertes, ce qui accroît l'intérêt des chercheurs pour ces molécules. Bien que des progrès considérables ont été réalisés afin de comprendre la fonction des polyphosphates chez les bactéries, ce qui concerne la synthèse, le stockage et la dégradation des polyphosphates chez les eucaryotes est mal connu. Les vacuoles de la levure Saccharomyces cerevisiae sont similaires aux acidocalcisomes des organismes supérieurs en termes de structure et de fonction. Les acidocalcisomes sont difficiles à étudier car il n'existe que peu d'outils génétiques et biochimiques qui permettent leur caractérisation. En revanche, les vacuoles peuvent être aisément isolées des cellules vivantes et manipulées génétiquement. Les vacuoles comme les acidocalcisomes synthétisent et stockent les polyphosphates. Ainsi, les découvertes faites grâce aux vacuoles de levures peuvent être extrapolées aux acidocalcisomes des organismes supérieurs. Le but de mon projet était de caractériser la synthèse des polyphosphates par des vacuoles isolées. Au cours de mon travail de thèse, j'ai mis au point une méthode de mesure de la synthèse des polyphosphates par des organelles purifés. Ensuite, j'ai identifié des composés qui modulent la réaction enzymatique lorsque celle-ci a lieu dans la vacuole ou après solubilisation de l'organelle. J'ai ainsi pu mettre en évidence deux groupes distincts de polyphosphates dans le système : ceux au-dehors de la vacuole et ceux en-dedans de l'organelle. Cette observation suggère donc très fortement que les vacuoles non seulement synthétisent les polyphosphates mais aussi transfère les molécules synthétisées de l'extérieur vers l'intérieur de l'organelle. Il est très vraisemblable que les vacuoles régulent le renouvellement des polyphosphates qu'elles conservent, en réponse à des signaux cellulaires. Des essais de purification de l'enzyme synthétisant les polyphosphates ainsi que sa reconstitution dans des liposomes ont également été entrepris. Ainsi, mon travail présente de nouveaux aspects de la synthèse des polyphosphates chez les eucaryotes et les résultats devraient encourager l'élucidation de mécanismes similaires chez les organismes supérieurs. - Les polyphosphates (iPOP) sont des polymères linéaires de phosphates inorganiques liés par des liaisons phosphoanhydres de haute énergie. Ces molécules sont présentes dans tous les organismes et localisées dans des compartiments cellulaires appelés acidocalcisomes. Elles varient en taille de quelques dizaines à quelques centaines d'unités phosphate. Des fonctions nombreuses et variées ont été attribuées aux iPOP dont un rôle dans les métabolismes de l'énergie et du phosphate, dans la régulation d'activités enzymatiques, la virulence, la pathogénicité, le remodelage osseux et la coagulation sanguine. Il a récemment été montré que les cellules de myélome contiennent une grande quantité de iPOP. Il y donc un intérêt croissant pour les iPOP dans les lignées cellulaires humaines. Cependant, très peu d'informations sur le métabolisme des iPOP chez les eucaryotes sont disponibles. Les acidocalcisomes sont des compartiments acides et denses aux électrons. Ils font partie du groupe des organelles similaires aux lysosomes (LROs pour Lysosome Related Organelles). Le fait que les acidocalcisomes soient conservés dans tous les règnes du vivant montrent l'importance de ces compartiments pour les organismes. Cependant, l'analyse de ces organelles est rendue difficile par l'existence d'un nombre limité d'outils biochimiques permettant leur caractérisation. Les vacuoles de levures possèdent des aspects structuraux et physiologiques très similaires à ceux des acidocalcisomes. Par exemple, ils synthétisent et gardent en réserve les iPOP. Ceci fait des vacuoles de levure un modèle idéal pour l'étude de processus biologiques conservés chez les vacuoles et les acidocalcisomes. De plus, la levure est un organisme de choix pour l'étude de la synthèse des iPOP compte-tenu de l'existence de nombreux outils génétiques et la possibilité d'isoler des vacuoles fonctionnelles. Notre groupe a identifié le complexe VTC (Vacuole transporter Chaperone) comme étant responsable de la synthèse des iPOP et la sous-unité Vtc4p comme celle possédant l'activité catalytique. L'objectif de cette étude était de caractériser le processus de synthèse des iPOP en utilisant des vacuoles isolées et de reconstituer la synthèse des iPOP dans des liposomes. La première étape a consisté en la mise au point d'un dosage permettant la mesure de la quantité de iPOP synthétisés par les organelles isolés en fonction du temps. Cette nouvelle méthode a été comparée aux méthodes décrites précédemment dans la littérature. Ensuite, la caractérisation détaillée du processus a permis d'identifier des composés modulateurs de la réaction à la fois pour des vacuoles intactes et des vacuoles solubilisées. Enfin, des essais de purification du complexe VTC et sa reconstitution dans des liposomes ont été entrepris. De façon parallèle, une étude sur la translocation et le stockage des iPOP dans le lumen des vacuoles a été menée. Il a ainsi été possible de mettre en évidence différents groupes de iPOP : les iPOP localisés à l'intérieur et ceux localisés à l'extérieur des vacuoles isolées. De plus, nous avons observé que le lysat vacuolaire n'est pas détérioré par les étapes de reconstitution dans les liposomes et conserve l'activité de synthèse des iPOP. Les prochaines étapes consisteront en la purification du complexe intact et de la détermination de sa structure par cryo-microscopie électronique.

Characterization of a new potential virulence factor of Microsporum canis, the secreted subtilisin Sub6

Background: Microsporum canis is a dermatophyte responsible for cutaneous superficial mycoses in domestic carnivores and humans. The pathogenesis of dermatophytoses, including M. canis infections, remains poorly understood. Secreted proteases including members of the subtilisin family are thought to be involved in the infection process. In particular the subtilisin Sub6 could represent a major virulence factor.Objective: The aim of this work was to (i) isolate the M. canis SUB6 genomic DNA and cDNA (ii) produce Sub6 as a recombinant protease (rSub6) and (iii) produce a specific anti-Sub6 polyclonal serum. Material and methods: Genomic SUB6 was amplified by PCR using specific primers and M. canis IHEM 21239 DNA as a target. The SUB6 cDNA was obtained by reverse transcriptase (RT)-PCR using total RNA extracted from the same M. canis strain grown in liquid medium containing feline keratin as unique nitrogen source. Both SUB6 cDNA and genomic DNA were sequenced. The SUB6 cDNA was cloned in pPICZA to produce recombinant Sub6 (rSub6) in Pichia pastoris KM71. This protease rSub6 was produced in methanol medium at a yield of 30 mg ml)1 and purified by anion exchange chromatography using a DEAE-sepharose column. Polyclonal antibodies against purified rSub6 were produced in a rabbit using a standard immunization procedure with saponin as the adjuvant. Seventy days after the first immunization, serum was collected and IgG were purified by affinity chromatography.Results: The coding sequence for M. canis SUB6 from genomic DNA contains 1410 bp and 3 introns, while the cDNA contains a 1221 bp open reading frame. Deduced amino acid sequence analysis revealed that Sub6 is synthesized as a 406 amino acids preproprotein. The predicted catalytic domain has 286 amino acids, a molecular mass of 29.1 kDa and five potential N-glycosylation sites. SDS-PAGE of rSub6 revealed a single polypeptide chain with an apparent molecular mass of 37 kDa. Purified rabbit IgG were shown to be specific for Sub6 using ELISA.Conclusion: We have characterized for the first time Sub6 from a dermatophyte species as a recombinant secreted active enzyme and purified it until homogeneity. Active rSub6 and Sub6 specific antiserum will be used to further study the role of M. canis Sub6 protease in pathogenesis, notably the pattern of in vivo Sub6 secretion in different host species.

In situ and genetic characterization of Gossypium barbadense populations from the states of Pará and Amapá, Brazil

The objective of this work was to characterize the populations of Gossypium barbadense in the states of Amapá and Pará, Brazil. In situ characterization was conducted through interviews with the owners of the plants and environmental observations. Leaf or petal tissue as well as seed samples were collected for genetic characterization by single sequence repeats markers and for storage in germplasm banks, respectively. The plants were maintained in dooryards and used mainly for medical purposes. The genetic analysis showed no heterozygous plants at the loci tested (f = 1), indicating that reproduction occurs mainly through selfing. The total genetic diversity was high (He = 0.39); and a high level of differentiation was observed between cotton plants from the two states (F ST = 0.36). Conventional methods of in situ maintenance of G. barbadense populations are not applicable. The conservation of the genetic variability of populations present in the two states could be achieved through germplasm collection and establishing of ex situ seed banks.

Image Analysis for the Characterization of Materials for Highway Construction : Phase I, Progress Report, HR-346, 1992

The major objective of this project is to evaluate image analysis for characterizing air voids in Portland cement contract (PCC) and asphalt concrete (AC) and aggregate gradation in asphalt concrete. Phase 1 of this project has concentrated on evaluation and refinement of sample preparation techniques, evaluation of methods and instruments for conducting image analysis, and finally, analysis and comparison of a select portion of samples. Preliminary results suggest a strong correlation between the results obtained from the linear traverse method and image analysis methods for determining percent air voids in concrete. Preliminary work with asphalt samples has shown that damage caused by a high vacuum of the conventional scanning electron microscope (SEM) may too disruptive. Alternative solutions have been explored, including confocal microscopy and low vacuum electron microscopy. Additionally, a conventional high vacuum SEM operating at a marginal operating vacuum may suffice.

Risk and global change : developing scientific methods for advocacy and awareness raising

Les catastrophes sont souvent perçues comme des événements rapides et aléatoires. Si les déclencheurs peuvent être soudains, les catastrophes, elles, sont le résultat d'une accumulation des conséquences d'actions et de décisions inappropriées ainsi que du changement global. Pour modifier cette perception du risque, des outils de sensibilisation sont nécessaires. Des méthodes quantitatives ont été développées et ont permis d'identifier la distribution et les facteurs sous- jacents du risque.¦Le risque de catastrophes résulte de l'intersection entre aléas, exposition et vulnérabilité. La fréquence et l'intensité des aléas peuvent être influencées par le changement climatique ou le déclin des écosystèmes, la croissance démographique augmente l'exposition, alors que l'évolution du niveau de développement affecte la vulnérabilité. Chacune de ses composantes pouvant changer, le risque est dynamique et doit être réévalué périodiquement par les gouvernements, les assurances ou les agences de développement. Au niveau global, ces analyses sont souvent effectuées à l'aide de base de données sur les pertes enregistrées. Nos résultats montrent que celles-ci sont susceptibles d'être biaisées notamment par l'amélioration de l'accès à l'information. Elles ne sont pas exhaustives et ne donnent pas d'information sur l'exposition, l'intensité ou la vulnérabilité. Une nouvelle approche, indépendante des pertes reportées, est donc nécessaire.¦Les recherches présentées ici ont été mandatées par les Nations Unies et par des agences oeuvrant dans le développement et l'environnement (PNUD, l'UNISDR, la GTZ, le PNUE ou l'UICN). Ces organismes avaient besoin d'une évaluation quantitative sur les facteurs sous-jacents du risque, afin de sensibiliser les décideurs et pour la priorisation des projets de réduction des risques de désastres.¦La méthode est basée sur les systèmes d'information géographique, la télédétection, les bases de données et l'analyse statistique. Une importante quantité de données (1,7 Tb) et plusieurs milliers d'heures de calculs ont été nécessaires. Un modèle de risque global a été élaboré pour révéler la distribution des aléas, de l'exposition et des risques, ainsi que pour l'identification des facteurs de risque sous- jacent de plusieurs aléas (inondations, cyclones tropicaux, séismes et glissements de terrain). Deux indexes de risque multiples ont été générés pour comparer les pays. Les résultats incluent une évaluation du rôle de l'intensité de l'aléa, de l'exposition, de la pauvreté, de la gouvernance dans la configuration et les tendances du risque. Il apparaît que les facteurs de vulnérabilité changent en fonction du type d'aléa, et contrairement à l'exposition, leur poids décroît quand l'intensité augmente.¦Au niveau local, la méthode a été testée pour mettre en évidence l'influence du changement climatique et du déclin des écosystèmes sur l'aléa. Dans le nord du Pakistan, la déforestation induit une augmentation de la susceptibilité des glissements de terrain. Les recherches menées au Pérou (à base d'imagerie satellitaire et de collecte de données au sol) révèlent un retrait glaciaire rapide et donnent une évaluation du volume de glace restante ainsi que des scénarios sur l'évolution possible.¦Ces résultats ont été présentés à des publics différents, notamment en face de 160 gouvernements. Les résultats et les données générées sont accessibles en ligne (http://preview.grid.unep.ch). La méthode est flexible et facilement transposable à des échelles et problématiques différentes, offrant de bonnes perspectives pour l'adaptation à d'autres domaines de recherche.¦La caractérisation du risque au niveau global et l'identification du rôle des écosystèmes dans le risque de catastrophe est en plein développement. Ces recherches ont révélés de nombreux défis, certains ont été résolus, d'autres sont restés des limitations. Cependant, il apparaît clairement que le niveau de développement configure line grande partie des risques de catastrophes. La dynamique du risque est gouvernée principalement par le changement global.¦Disasters are often perceived as fast and random events. If the triggers may be sudden, disasters are the result of an accumulation of actions, consequences from inappropriate decisions and from global change. To modify this perception of risk, advocacy tools are needed. Quantitative methods have been developed to identify the distribution and the underlying factors of risk.¦Disaster risk is resulting from the intersection of hazards, exposure and vulnerability. The frequency and intensity of hazards can be influenced by climate change or by the decline of ecosystems. Population growth increases the exposure, while changes in the level of development affect the vulnerability. Given that each of its components may change, the risk is dynamic and should be reviewed periodically by governments, insurance companies or development agencies. At the global level, these analyses are often performed using databases on reported losses. Our results show that these are likely to be biased in particular by improvements in access to information. International losses databases are not exhaustive and do not give information on exposure, the intensity or vulnerability. A new approach, independent of reported losses, is necessary.¦The researches presented here have been mandated by the United Nations and agencies working in the development and the environment (UNDP, UNISDR, GTZ, UNEP and IUCN). These organizations needed a quantitative assessment of the underlying factors of risk, to raise awareness amongst policymakers and to prioritize disaster risk reduction projects.¦The method is based on geographic information systems, remote sensing, databases and statistical analysis. It required a large amount of data (1.7 Tb of data on both the physical environment and socio-economic parameters) and several thousand hours of processing were necessary. A comprehensive risk model was developed to reveal the distribution of hazards, exposure and risk, and to identify underlying risk factors. These were performed for several hazards (e.g. floods, tropical cyclones, earthquakes and landslides). Two different multiple risk indexes were generated to compare countries. The results include an evaluation of the role of the intensity of the hazard, exposure, poverty, governance in the pattern and trends of risk. It appears that the vulnerability factors change depending on the type of hazard, and contrary to the exposure, their weight decreases as the intensity increases.¦Locally, the method was tested to highlight the influence of climate change and the ecosystems decline on the hazard. In northern Pakistan, deforestation exacerbates the susceptibility of landslides. Researches in Peru (based on satellite imagery and ground data collection) revealed a rapid glacier retreat and give an assessment of the remaining ice volume as well as scenarios of possible evolution.¦These results were presented to different audiences, including in front of 160 governments. The results and data generated are made available online through an open source SDI (http://preview.grid.unep.ch). The method is flexible and easily transferable to different scales and issues, with good prospects for adaptation to other research areas. The risk characterization at a global level and identifying the role of ecosystems in disaster risk is booming. These researches have revealed many challenges, some were resolved, while others remained limitations. However, it is clear that the level of development, and more over, unsustainable development, configures a large part of disaster risk and that the dynamics of risk is primarily governed by global change.