Performance Characteristics of an Axial-Flux Solid-Rotor-Core Induction Motor

The integration of electric motors and industrial appliances such as pumps, fans, and compressors is rapidly increasing. For instance, the integration of an electric motor and a centrifugal pump provides cost savings and improved performance characteristics. Material cost savings are achieved when an electric motor is integrated into the shaft of a centrifugal pump, and the motor utilizes the bearings of the pump. This arrangement leads to a smaller configuration that occupies less floor space. The performance characteristics of a pump drive can be improved by using the variable-speed technology. This enables the full speed control of the drive and the absence of a mechanical gearbox and couplers. When using rotational speeds higher than those that can be directly achieved by the network frequency the structure of the rotor has to be mechanically durable. In this thesis the performance characteristics of an axial-flux solid-rotor-core induction motor are determined. The motor studied is a one-rotor-one-stator axial-flux induction motor, and thus, there is only one air-gap between the rotor and the stator. The motor was designed for higher rotational speeds, and therefore a good mechanical strength of the solid-rotor-core rotor is required to withstand the mechanical stresses. The construction of the rotor and the high rotational speeds together produce a feature, which is not typical of traditional induction motors: the dominating loss component of the motor is the rotor eddy current loss. In the case of a typical industrial induction motor instead the dominating loss component is the stator copper loss. In this thesis, several methods to decrease the rotor eddy current losses in the case of axial-flux induction motors are presented. A prototype motor with 45 kW output power at 6000 min-1 was designed and constructed for ascertaining the results obtained from the numerical FEM calculations. In general, this thesis concentrates on the methods for improving the electromagnetic properties of an axial-flux solid-rotor-core induction motor and examines the methods for decreasing the harmonic eddy currents of the rotor. The target is to improve the efficiency of the motor and to reach the efficiency standard of the present-day industrial induction motors equipped with laminated rotors.

The PsyCoLaus study: methodology and characteristics of the sample of a population-based survey on psychiatric disorders and their association with genetic and cardiovascular risk factors.

ABSTRACT: BACKGROUND: The Psychiatric arm of the population-based CoLaus study (PsyCoLaus) is designed to: 1) establish the prevalence of threshold and subthreshold psychiatric syndromes in the 35 to 66 year-old population of the city of Lausanne (Switzerland); 2) test the validity of postulated definitions for subthreshold mood and anxiety syndromes; 3) determine the associations between psychiatric disorders, personality traits and cardiovascular diseases (CVD), 4) identify genetic variants that can modify the risk for psychiatric disorders and determine whether genetic risk factors are shared between psychiatric disorders and CVD. This paper presents the method as well as somatic and sociodemographic characteristics of the sample. METHODS: All 35 to 66 year-old persons previously selected for the population-based CoLaus survey on risk factors for CVD were asked to participate in a substudy assessing psychiatric conditions. This investigation included the Diagnostic Interview for Genetic Studies to elicit diagnostic criteria for threshold disorders according to DSM-IV and algorithmically defined subthreshold syndromes. Complementary information was gathered on potential risk and protective factors for psychiatric disorders, migraine and on the morbidity of first-degree family members, whereas the collection of DNA and plasma samples was part of the original somatic study (CoLaus). RESULTS: A total of 3,691 individuals completed the psychiatric evaluation (67% participation). The gender distribution of the sample did not differ significantly from that of the general population in the same age range. Although the youngest 5-year band of the cohort was underrepresented and the oldest 5-year band overrepresented, participants of PsyCoLaus and individuals who refused to participate revealed comparable scores on the General Health Questionnaire, a self-rating instrument completed at the somatic exam. CONCLUSIONS: Despite limitations resulting from the relatively low participation in the context of a comprehensive and time-consuming investigation, the PsyCoLaus study should significantly contribute to the current understanding of psychiatric disorders and comorbid somatic conditions by: 1) establishing the clinical relevance of specific psychiatric syndromes below the DSM-IV threshold; 2) determining comorbidity between risk factors for CVD and psychiatric disorders; 3) assessing genetic variants associated with common psychiatric disorders and 4) identifying DNA markers shared between CVD and psychiatric disorders.

Chemical characteristics of grape juices from different cultivar and rootstock combinations

The objective of this work was to evaluate the influence of different combinations of grape cultivars and rootstocks on chemical characteristics of grape juices. Six treatments were evaluated, consisting of combinations between the Isabel Precoce and BRS Cora grape cultivars and the 'IAC 766', 'IAC 313', and 'IAC 572' rootstocks. Approximately 10 L of juice were obtained per treatment. Analyses of color, total soluble solids content, pH, anthocyanins, total phenolics, total sugars, and quantification and identification of biogenic amines by HPLC were performed. Biogenic amines, such as putrescine, cadaverine, spermidine, and spermine, were found in all evaluated cultivars. By principal component analysis (PCA), treatments can be divided into two groups, according to the cultivar. Juices obtained from 'Isabel Precoce' are characterized by higher levels of total sugar content and soluble solids; however, juices from 'BRS Cora' are positively correlated with phenolic content, anthocyanins, and color and acidity parameters. The differences found by PCA for juices from the Isabel Precoce and BRS Cora cultivars indicate that, regardless of the rootstock used, the most important factor in the chemical characterization of juices is the grape cultivar.

Characteristics of a good customer reference for a process equipment supplier

Työn tavoitteena oli tutkia hyvän asiakasreferenssin ominaisuuksia suodatinvalmistaja Laroxin myynnin ja huollon sekä yrityksen asiakkaiden näkökulmasta. Larox voi käyttää saatua tietoa referenssien tehokkaampaan valintaan ja hyödyntämiseen. Kaksi internet-kyselyä toteutettiin, välineenä Webropol. Alustava kysely sunnattiin Laroxin myynnille ja huollolle. Kysely koostui viidestä kategoriasta asiakasreferenssejä, joiden tärkeyttä arvioitiin, sekä vapaista vastauksista. Tunnistettuja hyvän asiakasreferenssin ominaisuuksia ovat hyvä suhde referenssiasiakkaaseen, positiiviset jarehelliset suosittelut asiakkaalta, referenssilaitteen hyvä toimintakyky ja asiakas joka ymmärtää huollon tärkeyden. Pääkysely suunnattiin Laroxin asiakkaille. Tilastollisilla analyyseilla tutkittiin koetun riskin mallinmuuttujien välisiä yhteyksiä. Analyysit eivät paljastaneet merkittäviä riippuvuuksia asiakasreferenssin ominaisuuksien tärkeydessä eritaustaisten vastaajien tai tilannetekijöiden välillä, mutta asiakasreferenssin ominaisuuksien faktorit tukevat mallia. Referenssilaitteiden toimintakyky vaikuttaa tärkeimmältä ja huollon tärkeys on myös merkittävä.

Prevalence and characteristics of vitamin or dietary supplement users in Lausanne, Switzerland: the CoLaus study.

BACKGROUND AND OBJECTIVES: Vitamin+mineral supplement (VMS) and dietary supplement (DS) use is widespread in the general population, but the motivations for such use are poorly known. The prevalence and characteristics of VMS and DS users in Lausanne, Switzerland, were thus assessed. METHOD: Cross-sectional study was performed including 3249 women and 2937 men (CoLaus study). VMS were defined as single or multivitamin-multimineral preparations. DS included omega-3 or omega-6 fatty acids, herbal teas, plant or animal extracts and bacterial (Lactobacillus) preparations. Calcium and iron supplements were assessed separately. RESULTS: Twenty-six percent of the subjects reported using VMS or DS. VMS were the most frequently consumed item (16.8%), followed by DS (10%), calcium (6.6%) and iron (1.8%). Women reported a higher consumption than men. In women, VMS, DS and calcium use increased and iron use decreased with age, whereas in men only VMS and calcium intake increased with age. Multivariate analysis showed female gender, being born in Switzerland, increased age, higher education and increased physical activity to be positively related with VMS and DS. On bivariate analysis, VMS and DS users presented more frequently with arthritis, anxiety, depression and osteoporosis, but on multivariate analysis only positive relationships between DS use and anxiety/depression (odds ratio (OR)=1.40; 95% confidence interval (CI): [1.16-1.70]) and calcium and osteoporosis (OR=10.6; 95% CI [7.77-14.4]) were found. CONCLUSION: VMS and DS use is common in the population of Lausanne and associated with a better health profile. Calcium supplements are taken to prevent osteoporosis, whereas the rationale for taking other VMS and DS is unclear.

PHYSICOCHEMICAL CHARACTERISTICS OF BILIMBI (Averrhoa bilimbi L.)

The aimed of this work was to investigate the effects of maturity stages on the physicochemical characteristics of bilimbi (Averrhoa bilimbi L.) which were cultivated in Recife-PE. During one year, the fruits were harvested from five different trees (unidentified variety) in mature and half-mature stages. They were analysed on total soluble solids (TSS), oxalic acid and vitamin C. Ripe fruits had the highest levels of TSS and vitamin C and lowest levels of oxalic acid, independently of weather conditions. The results showed that maturity stage influenced on physicochemical characteristics of bilimbi fruits.

LEAF GAS EXCHANGE CHARACTERISTICS OF FOUR PAPAYA GENOTYPES DURING DIFFERENT STAGES OF DEVELOPMENT

In this research, was used four papaya (Carica papaya L.) genotypes: three from the 'Solo ( Sunrise Solo TJ, Sunrise Solo 72/12 and Baixinho de Santa Amália) group and one from the 'Formosa' group (Know-You 01). They were grown in plastic pots containing a sandy-clay-loam soil subjected to pH correction and fertilization, under greenhouse conditions. Throughout the experimental period plants were subjected to periodic irrigation to maintain the soil humitidy around field capacity. The experiment was conducted 73 days after sowing. In all genotypes, leaf gas exchange characteristics were determined. The net photosynthetic rate (A, mumol m-2 s-1 ), stomatal conductance (g s mol m-2 s-1), leaf temperature (T I, 0C) and intercellular carbon dioxide concentration (ci, muL L-1) on the 4th, 5th, 6th, 7th, 8th and 9th leaves from the plant apex were determined. No significant differences were observed for A, g s, c i, or Tl either among the leaves sampled from any of the genotypes. A was positively correlated with g s and in the other hand T I and g s were negatively correlated. The results suggest that, for 73 DAP, all the sampled papaya leaves functioned as sources of organs.

Improving Dynamic Characteristics of Open-loop Controlled Log Crane

The improvement of the dynamics of flexible manipulators like log cranes often requires advanced control methods. This thesis discusses the vibration problems in the cranes used in commercial forestry machines. Two control methods, adaptive filtering and semi-active damping, are presented. The adaptive filter uses a part of the lowest natural frequency of the crane as a filtering frequency. The payload estimation algorithm, filtering of control signal and algorithm for calculation of the lowest natural frequency of the crane are presented. The semi-active damping method is basedon pressure feedback. The pressure vibration, scaled with suitable gain, is added to the control signal of the valve of the lift cylinder to suppress vibrations. The adaptive filter cuts off high frequency impulses coming from the operatorand semi-active damping suppresses the crane?s oscillation, which is often caused by some external disturbance. In field tests performed on the crane, a correctly tuned (25 % tuning) adaptive filter reduced pressure vibration by 14-17 % and semi-active damping correspondingly by 21-43%. Applying of these methods require auxiliary transducers, installed in specific points in the crane, and electronically controlled directional control valves.

Agronomic characteristics of 'Prata-anã' and 'Maçã' bananas micropropagated

The experiment evaluated the agronomic characteristics of 'Prata-anã' and 'Maçã' banana plants, in the São Manuel region of São Paulo state. In the first crop cycle, the number of days from planting to inflorescence and from inflorescence to harvest; the number of shoots until the appearance of inflorescence and during the harvest period; active leaves number at inflorescence appearance and during the harvest period. Were evaluated yield parameters: like average weight of bunch, hand, rachis and fruit; average fruit number per hand and bunch; average fruit diameter and length. Incidences of plague diseases, as well as their severity were also evaluated. Delineation was totally at random, with 2 treatments, 15 replications and 5 useful plants per experimental plot. Both cultivars were characterized by values of descriptive average statistics and standard deviation, for characteristic interests. Number of days from planting to harvest was similar for both 'Prata-anã' and 'Maçã', 574 and 567 days respectively. Banana plants showed good phytosanitary quality throughout the whole cycle.

Meat characteristics of chickens from an F1 cross of two improved Spanish breeds depending on slaughter age

The present study analysed the meat characteristics of i) improved Castellana Negra chickens slaughtered at 18 weeks (CN-18) and ii) F1 crossbred chickens from improved Castellana Negra hens and improved Penedesenca Negra cocks (CNPN) slaughtered at 12 weeks and 18 weeks of age (young and adult animals, respectively). Purebred and crossbred specimens were compared at similar weights (CN-18 and CNPN-12) and ages (CN-18 and CNPN-18). The protein content of the meat was similar for the three types of animals; heavier animals (CNPN-18) had more fat than those slaughtered at lower weights (CNPN-12 and CN-18). Adults had a higher saturated fatty acid content and the young CNPN chickens had more monounsaturated fatty acids than CN chickens. In the CNPN adults, less water was lost during cooking, which is directly related to the juiciness of the meat. With regard to sensory analysis, a darker colour was observed in the meat as much as the internal fat of adult animals, in addition to greater colour uniformity. The meat of young CNPN birds was juicier, whereas that of the CN chickens was more fibrous. Therefore, we conclude that meat from CNPN chickens presents chemical, physical, and sensorial characteristics that make these animals a genetic base for alternative poultry production.

Sensory characteristics of 'Douradão' peaches submitted to modified atmosphere packaging

The sensory, physical and chemical characteristics of 'Douradão' peaches cold stored in different modified atmosphere packaging (LDPE bags of 30, 50, 60, 75µm thickness) were studied. After 14, 21 and 28 days of cold storage (1 ± 1 ºC and 90 ± 5% RH), samples were withdrawn from MAP and kept during 4 days in ambient air for ripening. Descriptive terminology and sensory profile of the peaches were developed by methodology based on the Quantitative Descriptive Analysis (QDA). The assessors consensually defined the sensory descriptors, their respective reference materials and the descriptive evaluation ballot. Fourteen individuals were selected as judges based on their discrimination capacity and reproducibility. Seven descriptors were generated showing similarities and differences among the samples. The data were analysed by ANOVA, Tukey test and Principal Component Analysis (PCA). The atmospheres that developed inside the different packaging materials during cold storage differed significantly. The PCA showed that MA50 and MA60 treatments were more characterized by the fresh peach flavour, fresh appearance, juiciness and flesh firmness, and were effective for keeping good quality of 'Douradão' peaches during 28 d of cold storage. The Control and MA30 treatments were characterized by the mealiness, the MA75 treatment showed lower intensity for all attributes evaluated and they were ineffective to maintain good quality of the fruits during cold storage. Higher correlation coefficients (positive) were found between fresh appearance and flesh firmness (0.95), fresh appearance and juiciness (0.97), ratio and intensity of fresh peach smell (0.81), as well as higher correlation coefficients (negative) between Hue angle and intensity of yellow colour (-0.91), fresh appearance and mealiness (-0.92), juiciness and mealiness (-0.95), firmness and mealiness (-0.94).

Yield formation and quality characteristics of early potatoes during a short growing period

Selostus: Typpilannoituksen ja nostoajankohdan vaikutus varhaisperunan satoon

Characteristics of Flowing Film

Työssä tutkittiin uutta teknologiaa pigmenttipäällystykseen. Tämä tekniikka on yleisesti tunnettua eräillä muilla teollisuudenaloilla. Kirjallisuustutkimuksessa on esitelty prosessia ja sen eri osatekijöitä sekä muilla aloilla tunnettuja prosessimuuttujia. Päällystyspastojen ja päällystettävien pintojen teoriaa on selvitetty uuden tekniikan ja pigmenttipäällystyksen valossa. Uuden tekniikan perusmekanismeja tutkittiin kokeellisessa osassa. Valuvan nestefilmin stabiilisuutta tutkittiin minimivirtauksen avulla. Stabiilisuustutkimuksen suorittamiseen käytettiin apuna Taguchi-matriisia DOE-ohjelmalla (Design of Experiments). Kokeiden perusteella minimivirtauksen kannalta päällystyspastalle edullisempi koostumus on kalsiumkarbonaatti- kuin kaoliinipasta. Sideaineella on pienempi osuus lateksia ja polyvinyylialkoholia parempi. Suurempi osuus pinta-aktiivista ainetta ja matala pastan kuiva-ainepitoisuus ovat suositeltuja. Tehokas ilmanpoisto päällystyspastasta on myös tärkeää lopullisen tuloksen kannalta. Koekoneella ajetuissa päällystyskokeissa havaittiin valuvan filmin ominaisuuksien tärkeys. Pienetkin kaasumäärät päällystyspastassa häiritsivät lopullisen päällysteen laatua. Päällystyspastan ilmanpoisto on avainasemassa erityisesti kun päällystetään suurella nopeudella pieniä päällystemääriä. Koeajoissa havaittiin kaikki kirjallisuudessa esitellyt rajoittavat tekijät. Kokeissa päällystettiin 400-1600 m/min nopeudella 5-20 g/m² päällystemääriä. Olosuhteet stabiilille nestefilmille vaativat edelleen kehitystä suurella nopeudella päällystettäessä. Päällysteen eroavaisuuksia verrattiin teräpäällystysmenetelmiin. Terä-päällystyksellä saadaan sileä mutta epätasaisesti peittävä pinta kun taas uuden tekniikan päällyste mukailee päällystettävän alustan topografiaa. Tasapaksun päällysteen etuna on hyvä peittävyys jo pienellä päällystemäärällä.

Characteristics of 2D convective structures in Catalonia (NE Spain): an analysis using radar data and GIS

Flood simulation studies use spatial-temporal rainfall data input into distributed hydrological models. A correct description of rainfall in space and in time contributes to improvements on hydrological modelling and design. This work is focused on the analysis of 2-D convective structures (rain cells), whose contribution is especially significant in most flood events. The objective of this paper is to provide statistical descriptors and distribution functions for convective structure characteristics of precipitation systems producing floods in Catalonia (NE Spain). To achieve this purpose heavy rainfall events recorded between 1996 and 2000 have been analysed. By means of weather radar, and applying 2-D radar algorithms a distinction between convective and stratiform precipitation is made. These data are introduced and analyzed with a GIS. In a first step different groups of connected pixels with convective precipitation are identified. Only convective structures with an area greater than 32 km2 are selected. Then, geometric characteristics (area, perimeter, orientation and dimensions of the ellipse), and rainfall statistics (maximum, mean, minimum, range, standard deviation, and sum) of these structures are obtained and stored in a database. Finally, descriptive statistics for selected characteristics are calculated and statistical distributions are fitted to the observed frequency distributions. Statistical analyses reveal that the Generalized Pareto distribution for the area and the Generalized Extreme Value distribution for the perimeter, dimensions, orientation and mean areal precipitation are the statistical distributions that best fit the observed ones of these parameters. The statistical descriptors and the probability distribution functions obtained are of direct use as an input in spatial rainfall generators.